EDIFIER W200T mini - Earplug

W200T mini - Earplug EDIFIER - Free user manual and instructions

Find the device manual for free W200T mini EDIFIER in PDF.

📄 29 pages English EN Download 💬 AI Question
Notice EDIFIER W200T mini - page 2
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about W200T mini EDIFIER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Earplug in PDF format for free! Find your manual W200T mini - EDIFIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. W200T mini by EDIFIER.

USER MANUAL W200T mini EDIFIER

True Wireless Earbuds Headphones

Manual

EN Power ON/OFF

EDIFIER W200T mini - EN Power ON/OFF - 1

  1. Power ON when taken out of the case.
  2. Power OFF when placed in the case.

Pairing

EDIFIER W200T mini - Pairing - 1

  1. Power ON when taken out of case.
  2. Press and hold the touch panel on either earbud for 3s. White and green LED will blink rapidly.
  3. Select either "EDIFIER W200T mini R" or "EDIFIER W200T mini L" in your device setting to connect.

1st Pairing

  1. Power ON when taken out of case. White and green LED will blink rapidly.
  2. Select either "EDIFIER W200T mini R" or "EDIFIER W200T mini L" in your device setting to connect.

Note: For subsequent use, the earbuds will auto-connect to device used last time.

EDIFIER W200T mini - 1st Pairing - 1

  1. Power ON when taken out of the case.
  2. Earbuds must disconnect to any devices.
  3. Press and hold the touch panel on both earbuds respectively for 8s to reset. Note: Left and right earbud must be done Reset separately.

Left & Right connection

EDIFIER W200T mini - Left & Right connection - 1

  1. Power on when taken out of the case.
  2. Earbuds must disconnect to any devices.
  3. Tap the touch panel 2 times until the green LED blink rapidly to enter left & right earbuds connection.
  4. After the earbuds are connected, the green LED will blink 2 times every 5s.
  5. Enter pairing mode.

Controls

EDIFIER W200T mini - Controls - 1

Play/pause:

EDIFIER W200T mini - Controls - 2

Play/pause:

EDIFIER W200T mini - Controls - 3

Previous track:

EDIFIER W200T mini - Controls - 4

Next track:

EDIFIER W200T mini - Controls - 5

Voice assistant:

EDIFIER W200T mini - Controls - 6

Voice assistant:

EDIFIER W200T mini - Controls - 7

Accept a call:

EDIFIER W200T mini - Controls - 8

Accept a call:

EDIFIER W200T mini - Controls - 9

End a call:

EDIFIER W200T mini - Controls - 10

End a call:

EDIFIER W200T mini - Controls - 11

Reject a call:

EDIFIER W200T mini - Controls - 12

Reject a call:

EDIFIER W200T mini - Controls - 13

Note: Images are for illustrative purposes only and may differ from the actual product.

For more information, please visit our website:

www.edifier.com

EDIFIER W200T mini - Controls - 14

EDIFIER W200T mini - Controls - 15

@Editierglobal

EDIFIER W200T mini - Controls - 16

@Edifier_Global

EDIFIER W200T mini - Controls - 17

@Edifier_Global

Model: EDF200061

Edifier International Limited

P.O.Box6264

General Post Office

Hong Kong

www.edifier.com

© 2021 Edifier International Limited. All rights reserved.

Printed in China

NOTICE:

For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.

Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

FR Allumer/Éteindre

EDIFIER W200T mini - FR Allumer/Éteindre - 1

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : EDIFIER

Model : W200T mini

Category : Earplug