Gärkeller Pro - Beer dispenser Klarstein - Free user manual and instructions

Product type	Beer dispenser / Fermenter
Brand	Klarstein
Model	Gärkeller Pro
Article number	0037666
Total capacity	19 liters
Usable capacity	Up to 15 liters
Dimensions (L x W x H)	29.6 x 29.6 x 50.8 cm
Approximate weight	3.5 kg
Main material	Stainless steel and plastic
Thermometer type	Immersion probe (∅ 3.8 mm)
Included accessories	Thermometer probe, caps, immersion tube, rotating arm, fittings, O-rings
Main functions	Fermentation and beer dispensing
Adjustable feet	Yes, with screws and nuts
Cleaning and maintenance	Wash with dish soap, rinse-free disinfection recommended
Safety instructions	Place on a flat and stable surface, clean before first use
Storage	In a dry place after cleaning
Repairability	Spare parts available (seals, caps, tubes)

Frequently Asked Questions - Gärkeller Pro Klarstein

How to assemble the immersion tube?

Place the immersion tube inside the device and secure it with the M14 nut.

Where to install the thermometer probe?

Push the thermometer probe through the small hole in the black cap after placing the cap into the dip tube.

How to adjust the device feet?

Unscrew the adjustable feet, adjust the desired height, and secure them with a screw and nut.

What is the recommended maximum wort capacity?

The usable capacity is a maximum of 15 liters for optimal fermentation.

How to clean the device before first use?

Clean thoroughly with dish soap and rinse. Then fill with hot water and detergent, empty, and let dry.

Should you disinfect before fermentation?

Yes, it is recommended to perform a rinse-free disinfection before transferring the wort into the device.

How to maintain the device after fermentation?

Immediately remove the beer, clean with a suitable product, and rinse with a disinfectant. Store dry.

What accessories are included in the box?

Thermometer probe, caps (black and stainless steel), immersion tube, rotating arm, O-rings, nuts, and tap.

Can I use a digital thermometer?

Yes, you can use a digital thermometer directly with the dip tube instead of the supplied probe.

Where to dispose of packaging accessories?

Remove all accessories from the bottom of the packaging before disposing of it and recycle according to local guidelines.

USER MANUAL Gärkeller Pro Klarstein

INHALTSVERZEICHNIS

Technische Daten 3

Montageteile 4

Zusammenbau 5

Fermentierung 6

Hersteller 7

Close-up of a stainless steel industrial vessel with a blue valve (no visible text or symbols)

Close-up of a metallic turbine impeller with visible blades and hub (no text or symbols)

Close-up of a hand holding a small mechanical component against a metallic background (no visible text or symbols)

Close-up of a stainless steel industrial vessel with a central valve and flange (no visible text or symbols)

Close-up of a metallic industrial component with a circular knob (no visible text or symbols)

Close-up of a wall-mounted mechanical component with a black lever and attached bracket (no visible text or symbols)

Close-up of a black mechanical component mounted on a vertical surface, possibly a valve or knob (no visible text or symbols)

Close-up of a metallic pressure gauge with a valve and scale (no visible text or symbols)

Close-up of a metallic mechanical component with a small circular feature (no visible text or symbols)

Close-up of a metallic bowl with a glass cap and handle (no visible text or symbols)

Close-up of metallic mechanical components with no visible text or symbols

Close-up of metallic screw fasteners and bolts (no text or symbols visible)

Close-up of two metallic pipes with black caps, one partially submerged in a metallic fitting (no text or symbols visible)

Metallic mechanical device with a purple lever and mounting base (no visible text or symbols)

3D cardboard box with cutouts and internal components, no visible text or symbols

HERSTELLER

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

Dear Customer,

Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

Item number 10037666
Volume 19 L (up to 1)	5 L effective volume)
Measurements 29.6	x 29.6 x 50.8 cm

COMPONENTS

No.	Component Image Quantity
1	Probe ∅ 3,8 mm thermometer 1
2	∅ 16 black plug for thermometer assembly		1
3	M14 Blow-Off Barb with O-Ring and M14 nut		1
4	M14 SS Plug with O-Ring and M14 nut		1
5	M14 thermowell with O-ring and M14 nut		1
6	Rotatable racking arm with O-ring		1
7	Washer for 3/4 " drainer valve Keep for future use.		1
8	∅ 19*2 O-ring for bottling valve Keep for future use.		1
9	∅ 12*1,5 O-ring for rotatable racking arm Keep for future use.	[xc53]	2

ASSEMBLY

Please place the thermowell inside the fermenter and secure in place with an M14 nut

Close-up of a stainless steel industrial vessel with a purple valve (no visible text or symbols)

Close-up of a metallic turbine impeller with visible blades and hub (no text or symbols)

Close-up of a hand holding a small metallic object against a blurred background (no visible text or symbols)

Close-up of a stainless steel industrial vessel with a conical inlet and valve (no visible text or symbols)

Place the black plug into the hole of thermowell, then get the probe of thermometer go through the small hole of plug. A digital thermometer can also be used directly with thermowell.

Close-up of a metallic industrial component with a circular knob (no visible text or symbols)

Close-up of a wall-mounted mechanical component with a black rod and blue base (no visible text or symbols)

Close-up of a black mechanical component mounted on a vertical surface (no visible text or symbols)

Close-up of a metallic pressure gauge mounted on a cylindrical base (no visible text or symbols)

Insert the racking arm into the inlet of ball valve.

Close-up of a metallic mechanical component with a circular detail and a small symbol (no visible text or symbols)

Close-up of a metallic glass container with a sharp drop in the center (no visible text or symbols)

Unscrew the detachable feet. Adjust it to an ideal height and fix it with screw and nut.

Close-up of metallic mechanical components with no visible text or symbols

Close-up of metallic mechanical components and connectors (no text or symbols visible)

Close-up of two metallic pipes with black caps, no visible text or symbols

Metallic industrial device with a central blue component and metallic frame (no visible text or symbols)

Screw on hose barb and SS plug as shown. Secure with M14 Nut.

Circular metallic object with a central hole and radial rim, resembling a lid or knob (no text or symbols visible)

Close-up of a hand holding a metallic mechanical component (no visible text or symbols)

Close-up of hands holding a small electronic component (no visible text or symbols)

Lock the lid with the buckles.

FERMENTATION

Initial use and preparation

1. Please clean and flush fermenter thoroughly before first use as dust and oils can remain from manufacturing We have found that using dish soap will work well.
2. After the first through clean, soak with hot water and StarSan (or other sanitizer). Dump contents and let air dry.
3. We always recommend a no-rinse sanitizer rinse before transferring wort from kettle to fermenter
4. Place on a level and stable surface.

After fermentation

1. Use a suitable cleaner immediate after transferring beer (PBW, Oxy Clean Free) and thoroughly rinse with sanitizer
2. Store the fermenter in a dry place.

NOTE : please take all the accessories out from the bottom cardboard before throwing it away.

Interior view of a cardboard box with cutouts and internal compartments (no visible text or symbols)

HERSTELLER

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

Cher client, chère cliente,

SOMMAIRE

Fiche technique 15

Pièces détachées 16

Assemblage 17

Fermentation 18

Fabricant 19

Close-up of a stainless steel cylindrical container with a blue valve inserted (no visible text or symbols)

Close-up of a metallic turbine or impeller with visible blades and central hub (no text or symbols)

Close-up of a hand holding a small cylindrical object against a metallic background (no visible text or symbols)

Close-up of a stainless steel industrial vessel with a purple valve and circular inlet (no visible text or symbols)

Close-up of a metallic mechanical component with a circular button (no visible text or symbols)

Close-up of a wall-mounted mechanical component with a black lever (no visible text or symbols)

Close-up of a metallic cylindrical object with a small circular knob attached (no visible text or symbols)

Close-up of a metallic pressure gauge with a blue valve attached (no visible text or symbols)

Close-up of a metallic mechanical component with a small circular feature (no visible text or symbols)

Close-up of a metallic container with a glass lid and handle (no visible text or symbols)

Close-up of metallic mechanical components with no visible text or symbols

Close-up of metallic mechanical components and bolts (no text or symbols visible)

Close-up of two metallic pipes with black caps, one partially submerged in liquid (no text or symbols visible)

Interior view of a stainless steel industrial machine with a central component and control panel (no visible text or symbols)

Circular metallic object with a central hole and radial rim, resembling a lid or vent (no text or symbols visible)

Close-up of a hand holding a metallic mechanical component (no visible text or symbols)

Close-up of hands holding a metallic object with a small black clip (no visible text or symbols)

3D rendered cardboard box with internal compartments and cutouts (no text or symbols visible)

HERSTELLER

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

Estimado cliente,

ÍNDICE

Datos técnicos 21

Close-up of a stainless steel cylindrical container with a blue valve inserted (no visible text or symbols)

Close-up of a metallic turbine or impeller with visible blades and central hub (no text or symbols)

Close-up of a hand holding a small mechanical component against a metallic background (no visible text or symbols)

Close-up of a stainless steel industrial vessel with a purple valve and circular inlet (no visible text or symbols)

Close-up of a metallic mechanical component with a circular button (no visible text or symbols)

Close-up of a wall-mounted mechanical component with a black lever (no visible text or symbols)

Close-up of a black mechanical knob attached to a vertical panel (no text or symbols visible)

Close-up of a pressure gauge mounted on a metallic cylindrical device (no visible text or symbols)

Close-up of a metallic mechanical component with a small circular feature (no visible text or symbols)

Close-up of a metallic container with a glass lid and handle (no visible text or symbols)

Close-up of metallic mechanical components with no visible text or symbols

Close-up of metallic screw fasteners and circular nuts arranged on a plain background (no text or symbols visible)

Close-up of metallic pipe fittings with a small component inserted, no visible text or symbols

Metallic industrial device with a central component and mounting feet (no visible text or symbols)

Circular metallic object with a central hole and glossy surface (no text or symbols visible)

Close-up of a hand holding a metallic mechanical component (no visible text or symbols)

Close-up of hands holding a metallic object with a small component (no visible text or symbols)

3D rendered cardboard box with internal compartments and cutouts (no text or symbols visible)

HERSTELLER

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

Gentile Cliente,

INDICE

Dati tecnici 27

Close-up of a stainless steel industrial vessel with a blue valve (no visible text or symbols)

Close-up of a metallic turbine or impeller with visible blades and central hub (no text or symbols)

Close-up of a hand holding a small cylindrical object against a metallic background (no visible text or symbols)

Close-up of a stainless steel industrial vessel with a purple valve and circular inlet (no visible text or symbols)

Close-up of a metallic industrial component with a circular button (no visible text or symbols)

Close-up of a wall-mounted mechanical component with a black rod and attached bracket (no visible text or symbols)

Close-up of a black mechanical component mounted on a cylindrical surface (no visible text or symbols)

Close-up of a metallic pressure gauge with a blue valve and scale, no visible text or symbols.

Close-up of a metallic mechanical component with a circular detail and a small symbol (no visible text or markings)

Close-up of a metallic mechanical component with reflective surfaces and a central pin (no visible text or symbols)

Close-up of metallic mechanical components with no visible text or symbols

Close-up of metallic mechanical components and connectors (no text or symbols visible)

Close-up of metallic pipe fittings with a small purple component attached (no visible text or symbols)

Metallic industrial device with a central mechanical component, no visible text or symbols

3D rendering of a cardboard box with internal compartments and cutouts (no visible text or symbols)

HERSTELLER

Unit 6 Riverside Business Centre

Brighton Road

Shoreham-by-Sea

BN43 6RE

United Kingdom

KLARSTEIN