AirPure AP 1.1 - Air purifier BLAUPUNKT - Free user manual and instructions

Product type	Air purifier
Brand	Blaupunkt
Model	AirPure AP 1.1
Dimensions (diameter x height)	71 mm x 195 mm
Net weight	425 g
Power supply	5 V ─ 1 A (USB), power < 5 W
Fan type	Double inlet DC Turbo
HEPA filter class	H11
Filter type	Pre-filter, HEPA, activated carbon (ref. APF1)
Noise level	≤ 35 dB
Recommended room volume	5 m³ to 11 m³
Particle sensor	PM2.5 with color display (blue/green/red)
UV lamp	Ultraviolet germicidal lamp (253.7 nm)
Fragrance reservoir	Yes, for essential oils (not included)
Filter replacement reminder	Yes, resettable by holding the power button for 3 seconds
Control	Touch control (on/off, fan speed)
Included accessories	USB power cable
Care and cleaning	Clean with a soft dry cloth. Disconnect before cleaning. Do not use liquids or solvents.
Safety	Do not use while driving. Keep children away. Do not block air intakes/outlets.
Spare parts and repairability	Replacement filter APF1 available. Contact an authorized dealer for any other defects.

Frequently Asked Questions - AirPure AP 1.1 BLAUPUNKT

How to clean the AirPure AP 1.1 air purifier?

Disconnect the device. Clean the exterior with a soft dry cloth. Never use liquids, solvents, or flammable products.

When and how to replace the filter?

Replace the filter when the reminder light comes on or every 6 to 12 months depending on usage. Unscrew the bottom cover, remove the old filter, and insert a new Blaupunkt APF1 filter. Close the cover securely.

How to reset the filter replacement reminder?

After replacing the filter, press and hold the power button for 3 seconds until the reminder light turns off.

What to do if the air purifier does not turn on?

Check that the USB cable is properly connected to the device and to a 5 V / 1 A power source. Test with another cable or adapter if necessary.

Can I use essential oils with this device?

Yes, pour a few drops of essential oil into the fragrance reservoir located under the bottom cover. Be careful not to get any into the filter.

What is the meaning of the PM2.5 indicator colors?

Blue: good air quality (0-50 µg/m³). Green: average quality (51-99 µg/m³). Red: poor quality (100-999 µg/m³).

What is the noise level of the purifier?

The maximum noise level is 35 dB, which is equivalent to a whisper. It is very quiet in low speed mode.

Can this device be used in the United States or Canada?

No, this product is not intended for sale in the United States or Canada. No warranty is provided for these countries.

Does the purifier operate on battery?

No, it must be permanently connected to a USB port via the provided adapter (not included). It does not contain an internal battery.

How to know if the filter needs to be replaced?

A filter replacement reminder light turns on the device. You may also notice reduced airflow or unusual noises.

USER MANUAL AirPure AP 1.1 BLAUPUNKT

Enjoy it.

EN - Operating Instructions

Functions

Filter replacement

Safety Notes

• Do not clean or spill liquids or flammable solvents on the device.
• Clean with soft cloth only. Disconnect AirPure before cleaning.
• Handle with care. Do not drop. Keep it away from electric & magnetic area.
• Keep AirPure free of any object obstructing the air flow.
• Do not let children play with air purifier.
• Do not operate the device while driving.
• Use the power cable provided only.

Disclaimer

In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages to property or life and whatsoever arising out of or connected with the use or misuse of our products. USA & CANADA: This product is not intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased on as-is basis. No warranty, whether expressed or implied is provided in the U.S. or Canada.

Functions

1. Air Outlet
2. Power Supply Port
3. Air Inlet
4. Bottom Cover
5. APF1 Filter (Pre Filter, HEPA Filter, Activated Carbon Filter)
6. Aroma Holder
7. PM2.5 Sensor
8. Turbo Fan
9. Buzzer
10. Ultraviolet Germicidal Lamp
11. Touch Control (Power Button and Fan Speed Control)
12. PM2.5 Indicator
13. Filter Replacement Reminder
14. Fan Speed Indicator

SPECIFICATIONS

• Indicator Display: PM2.5 Level, Filter Replacement Reminder, Auto/Manual Fan Speed • Pre-packed with Blaupunkt AirPure Filter (APF1) • Noise Level: ≤35dB • Fan Type: Double inlet DC Turbo Fan • HEPA Filter Grade: H11 • Ultraviolet Wavelength: 253.7nm • Applicable for space: 5m³-11m³ • Input Voltage: 5V - Current: 1A • Power: <5W • Dimensions: 71mm x 195mm - Net Weight: 425g • Accessories: USB Power Cable

TROUBLESHOOTING

If any of the following problems occur, please refer to Troubleshooting for possible solutions. Consult a Blaupunkt authorized dealer if the problem persists.

Problems	Possible Causes	Solutions
Air purifier does not power on	Air purifier is not connected to a power supply.	Ensure the USB cable is properly connected to USB power supply ports and air purifier's power input.
Airflow is significantly reduced	Exceed filter replacement cycle.	Replace with new filter.
Unusual noise while operating	Filter is not fitted properly.	Refer to operation instruction for correct filter replacement steps.

Air Purifier

1. a) Connect the USB charger to the 5V/1A power supply input of the Air Purifier. The Air Purifier will emit a buzzing sound and illuminate the Air Outlet when turned on.

b) The Air Purifier will begin operating in auto-detection status (low fan speed) when turned on. (It will automatically switch the fan to high speed when the PM2.5 value is at 50 µg/m³ or above.)

Turn On (Blue Indicator)

2. Power Button

a) Turn On/Off

- Press to turn on the Air Purifier; press again to adjust fan speed (On/Low/Hi/Off).

b) After Filter Replacement

- Press and hold the power button for 3 seconds to reset the filter replacement reminder.

1. The color of the indicator will change according to the PM2.5 value.

a) PM2.5 Value: 0 to 50μg/m³

Good Air Quality (Blue Indicator)

b) PM2.5 Value: 51 to 99μg/m³

Average Air Quality (Green Indicator)

c) PM2.5 Value: 100 to 999μg/m³

Bad Air Quality (Red Indicator)

Filter Replacement

1. Unscrew the bottom cover.

1. Remove the dirty filter and replace it with the new filter.

1. Optional: Drop essential oil (not included) on the aroma holder.

1. Screw the bottom cover tightly before begin operating the Air Purifier.

Functions

Filter Replacement

Functions

Functions

c) PM2.5 value: 100 to 999 μg/m3

1. Firmly press the bottom cover before turning on the air purifier.

Functions

Functions

a) PM2.5 value: from 51 to 99 μg/m3

c) PM2.5 value: from 100 to 999 μg/m3

Functions

Filter replacement

1. Unscrew the bottom cover.

1. Optional: Pour the essential oil (not included) into the fragrance reservoir.

BLAUPUNKT

Competence Center Car Multimedia

Evo-Sales GmbH

Hastenbecker Weg 33