Ramble - Stroller Joie - Free user manual and instructions

USER MANUAL Ramble Joie

1. Please check whether 2 support mounts are fixed correctly.

! To release the support mounts, please see image

WARNING IMPORTANT-READ THE INSTRUCTIONS CAREFULLY BE-FORE USE AND KEEP FOR FUTURE REFERENCE.! This product is suitable for a child who can not sit up by itself, roll over and can not push up itself up on its hand and knees. Maximum weight of the child: 9kg.! Only use on a firm, horizontal level and dry surface.! Do not let other children play unattended near the carry cot.! Do not use if any part of the carry cot is broken, torn or missing.! Use only replacement parts supplied or approved by the manufacturer.! Be aware of the risk of open fire and other source of strong heat, such as electric bar fires, gas fires, etc., in the near vicinity of carry cot.! The handles and the bottom of the carry cot should be inspected regularly for signs of damage and wear.! DO NOT use or add any mattress other than the one supplied with the carry cot.! This carry cot is not intended for prolonged periods of sleeping.! Do not leave your child unattended.! Never use the carry cot on a stand.! The head of the child in the carry cot should never be lower than the body of the child. ! Before carrying or lifting, make sure that the handle is in the correct position of use.! This product is only suitable for a child who cannot sit up unaided.! Do not place the carry cot near an open fire or other source of strong heat.! Do not add another mattress on top of the mattress provided or recom-mended by the manufacturers Product Information Read all the instructions in this manual before using this product. If you have any further questions, please consult the retailer. Some features may vary depending on model.It is approved to European Safety Standard EN 1466:2014/AC:2015. Product Carry CotPatent No. Patents pendingMade in ChinaWebsite www.joiebaby.comManufacturer Allison GmbH, Adam-Opel-Straße 21 67227 Frankenthal Assemble Carry Cot

2. Place the inner mattress and zip the

! Always use the mattress when using the carry cot. ! Mattress cover can easily be removed to wash. ! A storage compartment is inside of the carry cot.

- 2 while pressing the buttons on the both sides.

4. Put the bedcover into the carry

cot, then attach the hook and loop fasteners on the carry cot.

! Using the bedcover in winter to give baby a warmer and more comfortable sleep environment.

5. The completely assembled Carry

To disassemble the carry cot simply reverse the steps above. Use Carry Cot

Remove Carry Cot Press release buttons on both sides of carry cot

- 1, and then lift it upwards.

Place the carry cot directly down until it clicks into adapters.

A click sound means carry cot assembled completely.

! Please don't fold the stroller when the carry cot is still attached. Use the carry cot only with the Litetrax™ 4, Crosster™, Finiti™, Aeria™, Mytrax™ and Tourist™ Stroller which attached adapters.

Detach Soft Goods Care and Maintenance

1. Remove mattress from carry cot and mattress pad from liner. Clean liner

and mattress with a damp cloth and dry flat.

2. CLEANING: After removing mattress pad from liner, hand wash, drip dry,

NO BLEACH. Only use a damp cloth to clean the mattress pad. Never iron.

3. Removable seat pad may be washed in cold water and drip-dried. No

4. Excessive exposure to sun or heat could cause fading or warping of parts.

Unzip the zipper to remove the canopy soft goods.

2. Place the inner mattress and zip the