DO746K - Coffee machine DOMO - Free user manual and instructions

USER MANUAL DO746K DOMO

I PRODUCTSPECIFIEKE WAARSCHUWINGEN

I AVERTISSEMENTS SPÉCIFIQUES AU PRODUIT

WARRANTY Dear Customer, Thank you for your condence in DOMO. We do hope you enjoy your new purchase. Before reaching you, all our products undergo a strict quality inspection. Should you still encounter problems with your appliance, then we are truly sorry and will do everything possible to resolve the situation quickly. Do not hesitate to contact our customer service. Our sta will do all they can to help you! [phone] [e-mail] Monday - Thursday: 8.30 - 12.00 and 13.00 - 17.00 Friday: 8.30 - 12.00 and 13.00 - 16.30 This device has a warranty period of 2 years from the date of purchase. During this warranty period, the distributor will assume responsibility for any defects that can be shown to be the result of material, construction or manufacturing errors. Such defects will be remedied by repair or replacement of the device. The 2-year warranty period will be suspended during the repair period and will continue after the repair has taken place for the remaining duration of the warranty period. The warranty will be honoured if proof of purchase clearly showing the date of purchase is provided. If your device becomes defective within the 2-year warranty period, please return it with your proof of purchase to the store you purchased it from or follow the procedure of the relevant webshop if you bought it online. The warranty does not cover damage to the device, accessories or parts caused by:

• normal wear and tear from use;

• non-compliance with the instructions for use, maintenance and cleaning in the manual;

• incorrect connection, e.g. electrical voltage too high;

• incorrect, heavy-handed or abnormal use;

• repairs or alterations carried out by the consumer or unauthorised third parties;

SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken, including the following. Any injury or damage caused by failure to comply with these rules are at your own risk. Neither the manufacturer, importer, or the supplier may be held liable.

• Read all instructions carefully.

• Make sure all packaging materials and promotional stickers have been removed before using the appliance for the rst time. Make sure children cannot play with the packaging materials.

• This appliance is only suitable for use in domestic and similar environments, such as:

• sta kitchen areas in shops, oces and other working environments;

• by clients in hotels, motels and other residential type environments;

• bed and breakfast type environments.

• Children should be supervised to ensure that they do not play with the appliance.

• This appliance can be used by children aged from 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children unless they are older than 16 or supervised.

• Keep the appliance and its cord out of reach of children younger than 16 years.

• All repairs should be carried out by the manufacturer or its aftersales service.

I ELECTRICAL WARNINGS

• In order to avoid a hazard this appliance must not be supplied through an external switching device, such as a timer or a38 www.domo-elektro.be

separate remote control, or connected to a circuit that is regularly switched on and o by the utility.

• The appliance must be disconnected from its power source when not in use, during service and when replacing parts. If present, rst turn all the buttons to the 'o' position, then pull the plug out of the socket by grasping the plug itself. Never pull the cord or appliance to remove the plug from the socket.

• Before use, check carefully that the electric tension and frequency of the power net at your home match the indications on the rating label of the appliance.

• The appliance must be plugged into an appropriate outlet that is installed and grounded in accordance with local installation regulations.

• Do not let the power supply cord hang over the edge of a counter, or touch hot surfaces.

• Keep the power cord away from hot parts and don’t cover the appliance.

• Unwrap the cord completely to prevent overheating of the cord. Do not allow the power cord supply to run underneath or around the unit.

• For safety reasons, never use the appliance if the cord, plug, or appliance itself is damaged, or after a malfunction of the appliance. Return the appliance to the DOMO Service Department or its service agent for examination, repair, or electrical or mechanical adjustment. Do not try to repair the appliance yourself. I INSTALLATION

• Do not place near ammable materials, gases or explosives.

• Do not use or store this appliance outdoors.

• Always use the appliance on a steady, dry and level surface.

• Never place this appliance near a gas stove or electrical stove or in a place where it may come into contact with a warm appliance. I USE

• Do not use this appliance for other than intended use.

• Never leave the appliance unattended while it is functioning.www.domo-elektro.be 39

• Do not operate the appliance with wet hands.

• The use of accessories that are not recommended or sold by the manufacturer can cause re, electrical shock or injuries. Only use the utensils delivered with the appliance.

I CLEANING AND MAINTENANCE

• To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other liquid.

• Failure to maintain this appliance in a clean condition could adversely aect the life of the appliance and possibly result in a hazardous situation. I PRODUCT

• Do not overll the appliance. Never add water above the maximum level marked on the water tank.

• Do not spill any liquid on the connector.

• Do not move the appliance while in use or when still hot. Allow to cool before moving the appliance.

• Do not remove the portalter or the water reservoir while making coee or steaming milk.

• Caution should also be taken while removing the porta-lter since the metal parts will be hot.

• The steam from the steam nozzle is hot. Be careful not to get burned.

• Only touch the appliance by its buttons and handles. Other surfaces may become hot during use.

• Never use the appliance without water.

• Turn o the appliance before removing the water reservoir.

• The top of the appliance can be used as a cup warmer. This plate gets hot when in use. Do not touch it.

• Do not place the unit in a cabinet when in use.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

All images and descriptions in this manual are purely indicative and may dier slightly from the actual device.40 www.domo-elektro.be

12. Measuring scoop with tamper

20. Steam/hot water button

BEFORE THE FIRST USE

• Remove all packaging materials and any promotional stickers.

• Check that all accessories for the device are present and that the unit is not damaged.

• Flush out the pipes. First, allow the water to run through without adding ground coee to the lter of the portalter. See section: ‘use/coee’. Afterwards, throw away the water.

• Flush out the steam nozzle. See section: ‘use/hot water feature’. Afterwards, throw away the water.

• Clean all parts with a moist cloth.

1. Fill the water reservoir with the desired amount of water. Make sure if the level is within the

‘MIN’ and ‘MAX’ indicators on the reservoir. The reservoir is removable. Open the lid; lift the reservoir out of the appliance to ll it and then carefully place it back in the appliance. I It is recommended to rinse the water tank each time before putting it back into the appliance. Turn the dial to ‘ON’ and run water through the steam nozzle for 5 seconds. Then turn the dial back to ‘OFF’.

2. Plug the power cord into a socket. Make sure that the steam knob is in the o position. Press

3. Select the desired lter: the small lter for an espresso or a Lungo, the large lter for 2 cups,

iced coee or a double espresso. Place the lter in the portalter. Make sure the dot on the lter is aligned with the groove in the portalter.

4. Fill the lter with fresh, nely ground espresso coee using the measuring spoon (1 scoop for

the small lter, 2 scoops for the large lter). Press the ground coee rmly and evenly using the presser on the back side of the measuring spoon.Remove any excess coee from the edge. We recommend you ll the lter to 3 mm from the edge.

5. Place the portalter under the brew group. Hold the handle so that it connects correctly to the

open-lock symbol on the appliance and ts into the groove. Turn it slowly to the right, to the closed-lock symbol on the appliance.

6. Place 1 or 2 cups on the drip tray underneath both spouts.

7. Press the button for the desired type of coee. The image will blink on the display while the

unit heats up. Preparation is in progress as long as the image of the selected coee remains visible. You will hear a signal as soon as your coee is ready.

8. Remove the portalter from the appliance. Place the retainer clip against the lter and bang the

coee grounds out of the lter. Clean the portalter and lter and dry it o for the next use. Tips

• A clean coee maker is essential to make great tasting coee. Clean the appliance regularly according to the guidelines. Always use fresh, cold water in the coee maker.

• Store coee in a dry and cool place.

• The drip catcher can be removed to t a large cup under the portalter.

• Always make sure that the ground coee is evenly spread out in the lter. This improves the permeation eect.

• Pressing the ground coee with the tamper is an important process and aects the avour of your espresso. If the coee is rmly pressed, the water will ow through more slowly and you will get a stronger avour with more cream.

• To achieve the optimal coee temperature, we recommend that you heat up the unit and the cup. Use the same method as for preparing coee, but do not add ground coee to the lter of the portalter. ICED COFFEE The unit has to be cold in order to prepare iced coee. Let it cool down rst if you just made a hot cup of coee. Wait 15 minutes. Next, run cold water through the steam nozzle to cool the boiler. Switch on the unit, place a cup under the steam nozzle and turn the dial to the (ON) position. Allow ±2 bags of water to ow and turn the dial back to the (OFF) position. The unit is now ready for use. Add ice cubes to the water tank. Follow the usual steps for preparing coee as described under use. For preparation, select "Espresso cool".

The pod holder is compatible with Easy Serving Espresso Pods (E.S.E. pods).

1. Place the pod holder in the portalter. Make sure the dot on the pod

holder is aligned with the groove in the portalter. Place the E.S.E. pod in the pod holder.

2. Prepare the coee following the instructions in the 'Coee' section. Choose

the Espresso method.

3. Remove the portalter from the device. Remove the pod from the pod

holder. Clean and dry the portalter and pod holder before using them again.

COFFEE WITH CAPSULES

The capsule portalter is compatible with Nespresso® and Starbucks® capsules, among others.

1. Place the capsule in the capsule holder and press rmly. Place

the capsule holder in the capsule portalter.

2. Prepare the coee following the instructions in the 'Coee'

section. Choose the Espresso method.

3. Remove the portalter from the device. Remove the capsule

holder from the capsule portalter. Remove the capsule. Clean and dry the portalter and capsule holder before using them again. STEAM NOZZLE You use the steam nozzle to froth milk to achieve the perfect cappuccino or latte.

1. Fill the water reservoir.

2. Insert the plug in the power socket. Make sure that the steam dial is in the o position. Press

• Always make sure that the ground coee is evenly spread out in the lter. This improves the permeation eect.

• Pressing the ground coee with the tamper is an important process and aects the avour of your espresso. If the coee is rmly pressed, the water will ow through more slowly and you will get a stronger avour with more cream.

• To achieve the optimal coee temperature, we recommend that you heat up the unit and the cup. Use the same method as for preparing coee, but do not add ground coee to the lter of the portalter. ICED COFFEE The unit has to be cold in order to prepare iced coee. Let it cool down rst if you just made a hot cup of coee. Wait 15 minutes. Next, run cold water through the steam nozzle to cool the boiler. Switch on the unit, place a cup under the steam nozzle and turn the dial to the (ON) position. Allow ±2 bags of water to ow and turn the dial back to the (OFF) position. The unit is now ready for use. Add ice cubes to the water tank. Follow the usual steps for preparing coee as described under use. For preparation, select "Espresso cool".

The pod holder is compatible with Easy Serving Espresso Pods (E.S.E. pods).

1. Place the pod holder in the portalter. Make sure the dot on the pod

holder is aligned with the groove in the portalter. Place the E.S.E. pod in the pod holder.

2. Prepare the coee following the instructions in the 'Coee' section. Choose

the Espresso method.

3. Remove the portalter from the device. Remove the pod from the pod

holder. Clean and dry the portalter and pod holder before using them again.

COFFEE WITH CAPSULES

The capsule portalter is compatible with Nespresso® and Starbucks® capsules, among others.

1. Place the capsule in the capsule holder and press rmly. Place

the capsule holder in the capsule portalter.

2. Prepare the coee following the instructions in the 'Coee'

section. Choose the Espresso method.

3. Remove the portalter from the device. Remove the capsule

holder from the capsule portalter. Remove the capsule. Clean and dry the portalter and capsule holder before using them again. STEAM NOZZLE You use the steam nozzle to froth milk to achieve the perfect cappuccino or latte.

1. Fill the water reservoir.

2. Insert the plug in the power socket. Make sure that the steam dial is in the o position. Press

3. Fill a jug with cold, full-cream milk. (±100 ml milk for 1 cappuccino) Be

careful not to overll the milk jug. Frothing the milk will increase its volume.

4. Briey press the steam/hot water button. The image will blink on the

display while the unit heats up. If the image remains visible, the unit has reached the right temperature.

5. Point the steam nozzle over the drip tray. Slowly turn the dial to ON and

wait 10 seconds or until all the water has left the steam nozzle.

6. Turn the steam nozzle towards the milk jug. Bring the milk jug up to the

steam wand and insert the steam nozzle a few millimetres into the milk. I CAUTION: The steam nozzle itself and the emerging steam are hot. Do not touch the steam nozzle, use the black handle instead.

7. As the milk expands in volume, keep lowering the jug slightly until the

steam nozzle tip is just below the surface of the milk. If you insert the steam nozzle too deeply into the milk, it heats the milk but does not froth air into the milk and no foam will form. I Do not use the steam feature for more than 5 minutes at a time.

8. When you obtain the desired amount of foam, turn the rotary knob to

9. Clean the steam nozzle after every use.

I ATTENTION: the steam nozzle may still be really hot.

2. Place a cup under the steam nozzle.

3. Press and hold the steam/hot water button for 5

seconds. The image will blink on the display while the unit heats up. If the image remains visible, the unit has reached the right temperature.

4. Turn the totary knob (steam/water) to ON. Hot

water will ow from the steam nozzle.

5. When you have enough water, turn the dial to the

CLEANING AND MAINTENANCE

1. Before cleaning the unit, pull the plug out of the power socket and let the unit cool down.

2. Clean all removable parts (lters, portalter, measuring scoop with tamper, drip tray, and grille)

with clean warm water after use. Dry o the parts before putting them back.

3. Wipe the unit housing clean with a soft, damp cloth to remove stains.

4. Flush the unit regularly by brewing without putting ground coee in the lter.

5. Wipe the steam nozzle down with a soft, damp cloth. Rinse the steam nozzle after each use

with hot water. You can clear the pipe opening using a needle. I Do not immerse unit, cord, or plug in water or other liquid. I Never use aggressive or abrasive cleaning agents.

DESCALING When? If the Espresso and Lungo buttons ash at the same time, the unit needs to be descaled. Descale the unit regularly, on average every 2 to 4 weeks. Regularly descaling ensures the quality of your coee will be consistent, lowers energy consumption, and extends the espresso machine’s working life. How?

1. Fill the water reservoir with water and descaling product for espresso machines up to the MAX,

diluted according to the instructions on the product packaging.

2. Place the portalter with lter but without ground coee in the unit.

3. Place a collection container of at least 1 litres under the brew head and the steam nozzle.

Remove the drip tray if necessary.

4. Insert the plug in the power socket, turn on the unit.

1. Press the Espresso and Lungo buttons simultaneously for 5 seconds. Followed quickly by

turning the knob to the ON position. The Espresso image ashes and the Lungo image is highlighted on the display.

2. The descaling solution runs through the steam nozzle rst. The unit stops after several minutes,

at which point the steam nozzle has stopped emitting water.

3. Next, turn the knob to the (OFF) position. The rest of the descaling solution passes through the

unit and the portalter. This will take several minutes.

4. When the Lungo image on the display ashes while the Espresso image is highlighted, the

process has completed and the water tank is empty.

5. Empty the collection container. Now put the collection container back in.

6. The unit must now be ushed with clean water to ensure no lime residue remains. Rinse the

water reservoir and ll it with clean water.

7. Turn the knob to the ON position. While rinsing, the Espresso image is highlighted and the

Lungo image ashes. The water runs through the steam nozzle rst. The unit stops after several minutes, at which point the steam nozzle has stopped emitting water.

8. Next, turn the knob to the (OFF) position. The rest

of the water now ows through the unit and the portalter. This will take several minutes.

9. Descaling is complete once all the water has passed through the system. You will hear a signal

and all the icons will light up on the display.

10. Remove the portalter and rinse it with running water. Make sure it’s dry before using again.

Procedure interrupted If the descaling procedure is interrupted during phase 1 (descaling), unplug the unit and reinsert the plug. Start the procedure from the top. If the descaling procedure is interrupted during phase 2 (rinsing), remove the water tank. Rinse the tank with water, ll the tank with water and return to the unit. Allow the water to run through the brew head without adding ground coee to the lter of the portalter.

PROBLEMS AND SOLUTIONS

PROBLEMS SOLUTIONS The coee no longer ows. • There is no water in the reservoir. Fill the water reservoir.

• The ground coee is too ne or was compressed too tightly. Empty the lter, rinse it under water and rell it with coee.

• Descale the appliance. See section: ‘cleaning and maintaining/descaling’. No or little steam comes out of the steam nozzle.

• There is no water in the reservoir. Fill the water reservoir.

• To use the steam feature on the appliance, you must rst press the steam/hot water button before turning the dial to ON.

• The steam nozzle is blocked. Descale the appliance. See section: ‘cleaning and maintaining/descaling’. You can clear the pipe opening using a needle. Water leaks underneath the appliance. • This happens when you add too much water to the reservoir. Make sure you don’t overll past the MAX indicator.

• The drip tray is full of water. Empty the tray. Water leaks past the lter. • There is ground coee on the edge of the lter. Remove the excess coee from the rim. The lter is stuck in the portalter. • Make sure the dot on the lter is aligned with the groove in the portalter. Turn the lter until the small recess is turned to the side of the handle.46 www.domo-elektro.be

PROBLEMS SOLUTIONS During descaling, the water is emitted rst through the brew head and not through the steam nozzle.

• You forgot to turn the dial to the ON position. When the water stops being emitted, switch the appliance o again and start the descaling procedure again. See section: ‘cleaning and maintenance/ descaling’. GUIDELINES This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city oce, your household waste disposal service or the shop where you purchased the product. The packaging is recyclable. Please treat the packaging ecologically. This appliance conforms to all European requirements in the areas of safety, health, and environmental protection. The EU declaration concerning this appliance can be requested at any time from [e-mail] 47