EasyManual 
BCB2500 - Batterie de stockage électrique Be Cool - Free user manual and instructions
Find the device manual for free BCB2500 Be Cool in PDF.
User questions about BCB2500 Be Cool
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Batterie de stockage électrique in PDF format for free! Find your manual BCB2500 - Be Cool and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BCB2500 by Be Cool.
USER MANUAL BCB2500 Be Cool
Softwareinstallation:
EU-DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Wien, AUSTRIA
Declares, that the product
Manufacturer
Hersteller
BE COOL
Designation
Bezeichnung
is conformity with following directives, norms and/or regulations:
of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010
in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European
Supervisory Authority (European Securities and Markets Authority)
EMC Directive (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
EN 301489-1 V2.2.3 (2019-11)
EN 301489-17 V3.2.4(2020-09)
EN 61000-6-1/2/3/4
Funk
EN 300328 V2.2.2 (2019-07)
Seite/Page 1/2
BE COOL
EU-DECLARATION OF CONFORMITY
RoHS Directive: 2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110
Place and date of issue:
Vienna, 2023-08-22
Scharl, Alexander
Bevollmachteter Verreter des Herstellers Authorized representative of manufacture
Senior product and purchasing manager i.V.
Name, Funktion / name, function
Unterschrift / signature
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Wien, AUSTRIA
Declaresthattheproduct
Manufacturer
Fabricant
BE COOL
Designation
Désignation
is conformity with following directives, norms and/or regulations:
Place and date of issue:
Vienne, 2023-08-22
Authorized representative of manufacture
Scharl, Alexander
Senior product and purchasing manager i.V.
Nom, fonction / name, function
Signature / signature
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Vienne, AUTRICHE
N° FB / Company Register No.: 236974 t
EU-DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Vienna, AUSTRIA
Declares, that the product
Manufacturer
Produttore
BE COOL
Designation
Designazione
of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010
in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European
Supervisory Authority (European Securities and Markets Authority)
Salute esicurezza
EN 62109-1:2010
EN 62109-2:2011
EMC Directive (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the
laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
EN 301489-1 V2.2.3 (2019-11)
EN 301489-17 V3.2.4(2020-09)
EN 61000-6-1/2/3/4
Radio
EN 300328 V2.2.2 (2019-07)
Pagina/Page 1/2
BE COOL
EU-DECLARATION OF CONFORMITY
RoHS Directive: 2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110
Place and date of issue:
Vienna, 2023-08-22
Scharl, Alexander
Senior product and purchasing manager i.V.
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Vienna, AUSTRIA
EU-DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Wien, AUSTRIA
Declaresthat the product
Manufacturer
Fabrikant
BE COOL
Designation
Aanduiding
Balkoncentrale-opslagsysteme
Model number
Modelnummer
BC-B2500
is conformity with following directives, norms and/or regulations:
of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010 in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European Supervisory Authority (European Securities and Markets Authority)
EMC Directive (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
EN 301489-1 V2.2.3 (2019-11)
EN 301489-17 V3.2.4(2020-09)
EN 61000-6-1/2/3/4
Radio
EN 300328 V2.2.2 (2019-07)
Pagina/Page 1/2
BE COOL
EU-CONFORMITEITSVERKLARING EU-DECLARATION OF CONFORMITY
Senior product and purchasing manager i.V.
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Wien, AUSTRIA
FB-nr. / Company Register No.: 236974 t
EU-DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Wien, ÖSTERRIKE
Declaresthattheproduct
Manufacturer
Tillverkare
BE COOL
Designation
Beteckning
is conformity with following directives, norms and/or regulations:
of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010 in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European Supervisory Authority (European Securities and Markets Authority)
Hälsa och sakerhet
EN62109-1:2010
EN62109-2:2011
EMC-direktiv (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
EN301489-1 V2.2.3 (2019-11)
EN301489-17 V3.2.4(2020-09)
EN61000-6-1/2/3/4
Radio
EN300328 V2.2.2 (2019-07)
Sida/Page 1/2
BE COOL
EU FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
EU-DECLARATION OF CONFORMITY
RoHS-directivet: 2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110
CE-markning på Produkten/CE marking on the product:
Undertechnad for och pa uppdrag av:/Signed for and on behalf of: SCHUSS HOME ELECTRONIS GMBH
Place and date of issue:
Wien, 2023-08-22
Sharl, Alexander
Bevollmachtiger Vertreter des Herstellers Authorized representative of manufacture
Senior product and purchasing manager i.V.
Namn, Funktion/name, function
underskrift/signature
Referens till forsakran:
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Wien, ÖSTERRIKE
Foretagsregisternummer/CompanyRegisterNo.:236974t
EU-DECLARATION OF CONFORMITY
Za vydani tohoto prohlasei o shode je odpovedny vyhradne vyrobce.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Viden, RAKOUSKO
prohlasuje, ze vyrobek
Declares, that the product
Manufacturer
Vyrobce
BE COOL
Designation
Oznaceni
is conformity with following directives, norms and/or regulations:
Smernice RED SMERNICE EVROPSKEHO PARLAMENTU A RADY 2014/53/EU ze dne 16. dubna 2014 o harmonizaci prvnich prdepisu chenskych statu tykajcich se dodavani radiosych zaizeni na trh a zrueni smernice 1999/5/ES Ur.Vestnik EU L 153 /62 22.5.2014
DIRECTIVE 2014/51/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010 in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European Supervisory Authority (European Securities and Markets Authority)
Zdravá bezpečnost
EN 62109-1:2010
EN 62109-2:2011
EMC Directive (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the
laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
EN301489-1 V2.2.3 (2019-11)
EN301489-17 V3.2.4 (2020-09)
EN61000-6-1/2/3/4
Bezdrátový
EN 300328 V2.2.2 (2019-07)
Stránka/Page 1/2
BE COOL
EU PROHLÁŠENÍ O SHODE
EU-DECLARATION OF CONFORMITY
RoHS Directive: 2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110
Oznaceni CE na vyrobku / CE marking on the product:
Podepsánza jménem:/ Signed for and on behalf of: SCHUSS HOME ELECTRONIS GMBH
Place and date of issue:
Viden, 2023-08-22
Authorized representative of manufacture
Sharl, Alexander
Senior product and purchasing manager i.V.
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Viden, RAKOUSKO
FB C. / Company Register No.: 236974t
S vyhradou zmen a tiskovych chyb je aktuálné verze k dispozici ke staženi:
EU-DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Wien, AUSTRIA
Declares, that the product
Manufacturer
Vyrobca
BE COOL
Designation
Oznacenie
is conformity with following directives, norms and/or regulations:
Smernica RED SMERNICA EUROPSKEHO PARLAMENTU A RADY 2014/53/EU zo 16. aprla 2014 o harmonizacii pravnych predpisov chlenskych statov tykajucich sa spristupnovania radiosych zariadeni na trhu a o zruşeni smernice 1999/5/ES Uradny Vestnik EU L 153 /62 zo dna 22.5.2014 DIRECTIVE 2014/51/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010 in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European Supervisory Authority (European Securities and Markets Authority)
EMC Directive (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
EN 301489-1 V2.2.3 (2019-11)
EN 301489-17 V3.2.4 (2020-09)
EN 61000-6-1/2/3/4
Rádlové spektrum
EN 300328 V2.2.2 (2019-07)
Strana/Page 1/2
BE COOL
VYHLASENIE O ZHODE EU
EU-DECLARATION OF CONFORMITY
Smernica RoHS: Smernica Europskeho parliamentu a Rady 2011/65/EU
z 8. juna 2011 o obmedzení použivania niedtorych nebezpečnych látok v elektrickych a elektronickych zariadeniach; Uradny vestnik EU L174 zo dna 1. 7. 2011, s. 88-110
RoHS Directive: 2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110
Oznacenie CE na vyrobku / CE marking on the product:
Podpisane za a v mene:/ Signed for and on behalf of: SCHUSS HOME ELECTRONIS GMBH
Place and date of issue:
Vieden, 2023-08-22
Scharl, Alexander
Senior product and purchasing manager v z.
meno, funkcia / name, function
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Wien, AUSTRIA
c.v OR /CompanyRegisterNo.:236974t
EU-DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Viena, AUSTRIA
Declarà că produsul
Declares, that the product
Manufacturer
Producator
BE COOL
Designation
Denumirea
is conformity with following directives, norms and/or regulations:
EU-DECLARATION OF CONFORMITY
Semnat pentru si in numele:/ Signed for and on behalf of: SCHUSS HOME ELECTRONIS GMBH
Loculi data emitterii:
Place and date of issue:
Viena, 2023-08-22
Scharl, Alexander
Senior product and purchasing manager i.V.
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Wien, AUSTRIA
Nr. Registrar Comertului/Company Register No.: 236974 t
Balcony power storage system
BC-B2500
CONGRATULATIONS!
THANK YOU FOR CHOOSING A PRODUCT FROM BE COOL.
BE COOL
Table of contents
| Introduction |
| Intended use |
| Explanation of the symbols |
| Safety instructions |
| Notes on the integrated battery and disposal |
| Important notes on disposal |
| More information about the product |
| Scope of delivery |
| Commissioning |
| APP operation |
| Questions and answers |
| Technical data |
| Disclaimer |
| Warranty |
| Declaration of conformity |
PLEASE READ THE OPERATING INSTRUCTIONS
CAREFULLY BEFORE STARTING ASSEMBLY,
INSTALLATION, OPERATION OR MAINTENANCE.
PROTECT YOURSELF AND OTHERS BY FOLLOWING THE
SAFETY INSTRUCTIONS. FAILURE TO FOLLOW THE
INSTRUCTIONS MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND/OR LOSS OF
WARRANTY COVERAGE.
BE COOL
Intended use
The BE COOL BC-B2500 with 2,240 Wh is a smart storage solution to efficiently store excess energy from solar panels and release the stored energy when needed, anytime, anywhere. It has integrated (MPPT) technology to optimise the charging process. Our product is not suitable for use in highly sensitive networks related to the safety of people and highly and life-dependent on power supply, such as medical equipment, nuclear power plant equipment, aerospace equipment, etc. Therefore, we do not accept any liability for accidents involving personal injury, fires or machine breakdowns caused by the use of our product with the above equipment. The BE COOL BC-B2500 has an IP65 rating is dustproof, has full protection against contact and is protected against water jets from any angle
BE COOL
Explanation of the symbols
DANGER!
WARNING!
Safety instructions
These operating instructions are intended to familiarize you with the operation of this product. It contains important instructions for the use, safety and maintenance of the appliance. Therefore, keep this manual in a safe place so that you can refer to it at any time. Pass it on to subsequent users.
Please observe the following safety instructions carefully. If bodily injury or damage is caused by failure to follow the instructions, the guarantee will be invalidated.
DANGER!
Before using the unit, check the unit and its connecting cables and accessories for damage. Do not use the unit if it has visible damage.
Operate the unit only in conjunction with micro inverters and PV panels approved in the European Union. Check that the voltage indicated on the rating plate matches that of your PV panel.
Only charge the system using PV panels approved in the European Union and the connection cable included in the scope of delivery. Otherwise, overheating, fires, etc. may occur.
BE COOL
Make sure that the product is operated in an easily accessible place so that you can quickly disconnect the unit from the PV panels and the Micro inverter in case of emergency.
Carefully read the instructions of the devices you want to connect to the storage unit.
Note that if your units are not ready to plug in and electrical installation is required, electrical installations should only be carried out by qualified personnel. Electrical work can be life-threatening and improper installation can result in serious injury or even death. Please contact a qualified electrician to have electrical work carried out.
Do not crush the connection cable or drag it over sharp edges or hot surfaces. Do not use the connection cable for carrying.
If the connections or cables of this unit are damaged, do not continue to use the unit to avoid danger.
To reduce the risk of damage to the power plug and cable, pull on the plug and not the cable when disconnecting the product.
Do not use the product beyond its rated capacity. Overloading the outputs beyond the rated value may result in a risk of fire or injury to persons.
Do not operate the product with a damaged cable or plug or a damaged output cable.
Do not use the product or accessories if they are damaged or altered. Damaged or altered batteries may exhibit
BE COOL
unpredictable behaviour that can lead to fire, explosion or risk of injury.
Unplug the connected MC4 plugs in case of malfunctions during operation and before cleaning the unit.
To reduce the risk of electric shock, disconnect the connector plug from the unit before carrying out any maintenance.
Have maintenance carried out by a qualified repair technician and use only identical spare parts. This will ensure that the safety of the product is maintained.
Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock or injury.
Never pull the plugs out of the junction boxes by the cable or with wet hands.
Never immerse the product in water or other liquids. If the product accidentally falls into water, store it in a safe, open place and keep it away from fire until it is completely dry.
Never use the appliance after a malfunction, e.g. if the appliance has fallen into water or has been damaged in any other way.
The unit is intended exclusively for domestic use or similar purposes. It must not be used for commercial purposes!
Make sure that the unit is stable during operation and that you cannot trip over the connected cables.
BE COOL
Check the system before each use. Do not use the system if it is damaged or defective. Do not use the unit and contact customer service if you find that the system is damaged, cracked, defective or has other defects.
Do not stand on the product.
Handle the product with care. It may be damaged by bumps, knocks or falls from a low height.
Keep the product away from extreme moisture and extreme heat.
DANGER!
DO NOT disassemble, repair or modify the system or battery. This may result in electric shocks, fire, etc.
Never open the product yourself. Never carry out repairs yourself!
Do not disassemble the product. Take it to a qualified service technician when maintenance or repair is required. Improper reassembly may result in fire or electric shock.
Conversion or modification of the product impairs product safety and is prohibited. Caution: There is a risk of injury!
All modifications or repairs to the appliance or accessories may only be carried out by the manufacturer or by persons expressly authorised to do so by the manufacturer.
DO NOT place the system near a fire or expose it to extreme heat.
BE COOL
Do not use or store this product in direct sunlight for an extended period of time, such as in a car, on a truck bed, or in any other location exposed to high temperatures. Doing so may cause the product to malfunction, be damaged or generate heat.
If possible, do not expose it continuously to direct sunlight. This can lead to electric shocks, fires, etc.
Only use the output socket to supply external devices or to connect to a micro inverter. Do not connect the output directly to the mains under any circumstances.
DO NOT touch the system or the plugs with wet hands. This can lead to electric shocks.
Do not put fingers or hands into the product.
DO NOT rub your eyes if liquid from the system gets into your eyes. In this case, rinse the eyes with water and seek medical attention immediately. There is a risk of blindness.
DO NOT dispose of the system with household waste.
Observe the local regulations for disposal of the system.
When disposing of secondary cells or batteries, keep the cells or batteries of different electrochemical systems separate from each other.
DO NOT use unsuitable connection cables. This may result in electric shocks, fire, etc.
DO NOT operate the system beyond the specified input voltage. This may result in electric shock, fire, etc.
BE COOL
DO NOT use the system if it is not working properly. This may result in electric shocks, fire, damage to the system, etc.
DO NOT move the system while it is charging or in operation. This may result in electric shock, damage to the system or other injury.
WARNING
If the system shows any abnormalities, DO NOT continue to use the system and contact the dealer or customer service.
Keep the system away from children. DO NOT allow children to use the power supply unit. This may cause accidents or injuries. This system must not be used by children. Keep the system and its connecting cables out of the reach of children.
Children are not allowed to play with the system.
To reduce the risk of injury, close supervision is required when the product is used near children.
The system must not be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the system in a safe way and understand the hazards involved.
Keep the system away from pets.
DO NOT use or store the system in an environment with high temperatures. This may cause the system to deform or overheat.
BE COOL
If liquid from inside the system comes into contact with skin or clothing, wash the affected areas with tap water.
Contact with the liquid can cause injuries.
Unplug the connection cable from the power storage unit during a thunderstorm.
A thunderstorm can cause an overcurrent from the socket and thus from the Micro inverter, which can lead to overheating, fires or other accidents.
DO NOT lay the system on its side or turn it upside down during use or storage. This may cause the system to overheat, which may lead to accidents.
Be especially careful not to drop the unit on the floor. Place the unit on a stable surface. This also makes it easier to read the displays.
Keep the unit away from other objects when moving it.
The unit should not be exposed to shocks or vibrations. Otherwise there is a risk of fire.
CAUTION
If rust, strange odours, overheating or other abnormal conditions are detected, stop using the system immediately and contact the dealer or our customer service.
The system meets all legal requirements for the transport of dangerous goods.
BE COOL
This system contains LifePO4 batteries.
According to airline transport regulations, lithium batteries with a capacity of 100 Wh may not be transported by air. When transporting in vehicles, ensure that the system is properly secured when transported in a motor vehicle.
Failure to observe this instruction may result in damage to the equipment, electric shocks, overheating, fire and other accidents.
The system may only be charged and used at ambient temperatures between -0 and 50^ . If the system is operated above or below this temperature range, overheating or loss of performance may occur.
Switch off the system immediately if it has been accidentally dropped, dropped or subjected to strong vibrations. To avoid accidents, please contact the dealer or our customer service to have the system checked and repaired.
When you activate the protection function and disconnect the unit plug, disconnect the electrical equipment from the plug. Switch off the system when not in use/storage to avoid electric shock and unnecessary discharge of the battery, etc.
During operation, power supplies generate electromagnetic fields that may interfere with the normal operation of medical implants or medical devices such as pacemakers, cochlear implants, hearing aids, defibrillators etc. If such medical devices are used, check with the manufacturer for any restrictions on the use of the devices. These measures are
BE COOL
essential to ensure sufficient safe distance between medical implants (e.g. pacemakers, cochlear implants, hearing aids, defibrillators, etc.) and this product while in use.
Operating the unit in a residential environment may cause radio interference.
Do not use this product near strong static electricity or strong magnetic fields.
Notes on the integrated battery and disposal
Used rechargeable batteries do not belong in household waste. As a consumer, you are legally obliged to return used rechargeable batteries for proper disposal. You can return your rechargeable batteries to the public collection points in your community or wherever rechargeable batteries of the same type are sold.
Batteries do not belong in the hands of children.
Do not heat the battery above 60^ C and do not throw it into a fire: risk of fire, explosion and burns!
Do not short-circuit the battery.
Do not attempt to open batteries.
Stop charging immediately if the unit is very overheated. A battery that becomes very hot or deforms during charging is defective and must not be used any further.
BE COOL
Do not subject the battery to mechanical stress. Avoid dropping the battery, subjecting it to impacts, bending it or cutting it.
When charging the battery, make absolutely sure that the polarity of the charging plug is correct. If the charging plug is connected incorrectly, the charger is unsuitable or the polarity is reversed, there is a risk of short circuit and explosion!
Never discharge the battery completely as this will shorten its life.
Battery maintenance should be carried out or supervised by personnel who are familiar with batteries and the necessary precautions.
If the unit is to be stored for a longer period of time, it is recommended that the remaining capacity of the battery is approx. 30% of the charge volume.
The product can be charged at a temperature in the range 0-50 °C.
The product can discharge in a temperature range from -10^ to 50^ .
Low temperatures can affect the battery capacity of the product.
Do not expose the product to fire or high temperatures. Exposure to fire or temperatures above 130^ may cause an explosion.
BE COOL
In case of fire, use a class D fire extinguisher, foam or CO2 fire extinguisher.
When discharging, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
Do not clean the product with harmful chemicals or detergents.
Charge your LiFePO4 battery to 60 - 80 % of its capacity before storage.
Misuse, dropping or excessive force may cause damage to the product.
Do not expose this product to flammable, explosive gases or smoke.
The manufacturer accepts no responsibility for improper use resulting from non-compliance with the operating instructions.
Keep the original packaging of the unit and use it for transport.
BE COOL
| RECYCLING The packaging material can be recycled. It is therefore recommended to dispose of it in the sorted waste. | |
| DISPOSAL The symbol "crossed-out dustbin" requires the separate disposal of waste electrical and electronic equipment (WEEE). Electrical and electronic equipment can contain hazardous and environmentally harmful substances. Therefore, do not dispose of them in unsorted residual waste, but at a designated collection point for waste electrical and electronic equipment. By doing so, you are contributing to the protection of resources and the environment. For more information, please contact your dealer or local authorities. | |
| CE | DECLARATION OF CONFORMITY We hereby certify that this article complies with the essential requirements, regulations and directives of the EU. You can view the detailed declaration of conformity at any time under the following link: www.schuss-home.at/de/downloads/ |
| S | LIABILITY NOTICE We reserve the right to make printing errors and changes to the product, packaging or product documentation. Please note our warranty conditions. You can request the current version of these under the contact details given. You can view current operating instructions at any time at the following link www.schuss-home.at/de/downloads/ |
Errors and technical modifications excepted
BE COOL
Product description
- On/Off button:
Briefly press the button to switch on Long press 2s of the button to switch off
- LED display:
Status indicator : Output status Battery indicator :LED indicators for battery status
- Input/Output:
PV Input: MC4 2 1000W MAX
PV output: MC4 2 800W MAX
- Battery connection:
Max. Number of additional batteries: 2 Max. Expandable to max. capacity: 6,720Wh
BE COOL
Scope of delivery
1xBC-B2500
4x MC4 extension cable
1x Tool for removing cables
1x Instruction manual
Commissioning
- Connect the solar module to B2500 PV IN
- Connect the Micro Inverter MC4 Input to the B2500 MC4 OUT
- Press the B2500 power button until the power indicator lights up
- When you are not using the B2500, you can switch it off by pressing the power button for 2s.
BE COOL
If you find that the micro-inverter is not functioning properly after the connection described above, please connect as follows: Connect one of the micro-inverse to the Output1 of the product, and the other micro-inverse should either be disconnected or connected to the solar energy.
*This issue arises from the fact that some of the micro-inverters available on the market have a common internal reference point. When both micro-inverters are connected to a battery bank simultaneously, the micro-inverter will function abnormally.
Tool for removing cables:
Rotate the tool 90^
BE COOL
Important tips
- Before connecting the cables, make sure that the micro-inverter, the solar modules and the mains are disconnected and the unit is switched off.
- Before setting the output power of the BC-B2500, please check the rated power of your micro inverter. The output power should not be greater than the rated power of your micro inverter.
- The product should be protected from direct sunlight to avoid a rapid rise in temperature.
- Please check the accessories before installation, some accessories need to be purchased separately. After installation, please download the app first to check the generated power.
- For long-term storage, charge and discharge the product once every 6 months (discharge to 20% , then charge to 60 - 80% ).
Specifications:
| KG | ←↓ | |||||
| Capacity | Weight | Dimensions | PV Input | PV Output | Battery Cell | Certificate |
| 2240Wh (50000mAh/44.8V) | 19kg | 350x175x295 mm | 1000W max. | 800W max. | LiFePO4 Batterie | RoHS |
| Cycle times | Storage Temperature | Discharge Temperature | Charging Temperature | Protect system |
| 6000 Mal (25℃) | -10-55℃ | -10-50℃ | 0-50℃ | Overcharge protection, Over-discharge protection, Overcurrent protection, Over temperature protection, Short circuit protection, Overvoltage protection. |
BE COOL
Operating temperature range
Low temperatures may affect the battery capacity of the product. The product can be charged in a temperature range of -10^ - 50^ . The product can discharge in a temperature range of -10^ to 50^ . The product can store the device in a temperature range of -10^ - 55^ .
Operating the app
Power Zero can connect all your devices via Bluetooth® or Wi-Fi to track your energy consumption and generation in real time. It dynamically displays the device's status data in real time, giving you control over the device's energy.
This software can be operated on mobile phones with Android 6.0 and iOS 12.0 or higher.
Software installation:
Scan the QR code and install the opened app on your smartphone.
Registration:
After installation, users can click on the desktop icon to go to the login interface. The first time you open it, you will be taken to the server selection.
Select "Register" and enter your email address. A confirmation code will be sent to the previously entered email address to perform the verification. Confirm your email address in the app with the code received and set a password.
Log in with your e-mail address and the password you have chosen.
If you have forgotten your password, select "Forgot your password?" and reset it.
In the login interface, click top right -> enter server selection. Select different servers depending on the region.
BE COOL
Adding devices:
After successful login, select "Add device" in the upper left corner to add a device.
Open Bluetooth® on your smartphone and location sharing on the phone and select the device to add it directly.
BE COOL
Once the unit has been successfully added, the name of your BC-B2500 will be displayed on the Home screen.
By clicking on different devices on the device management page, you can switch the connection to different devices. On IOS systems, swiping to the left triggers changing and deleting devices, while on Android systems, a long press on the device list triggers changing and deleting devices.
Device home page: Displays the status of solar charging, discharging and other conditions in real time.
Charging settings:
2 modes:
1.PV1 and PV2 charging the battery for fully charged, then discharged.
2.PV1 charge the battery, PV2 transmitting to Micro inverter.
BE COOL
Discharge settings: Discharge switch have two ports which are used to control the output of the battery. It can be turned on one way or two ways.
App settings
Select the settings dial in the top right-hand corner to change settings or retrieve information:
- Account management.
- Share equipment.
App and device information.
Wi-Fi network - Deep discharge setting
- Discharge start threshold setting
Frequently asked questions & answers
Q: What type of battery is used?
A: LiFePO4 battery.
Q: Can the product be taken on the plane?
A: No, according to the standards for air transport, lithium batteries with a capacity of 100 Wh may not be carried in the aircraft.
BE COOL
Q: Can it be charged with solar panels of another brand?
A: Yes. Please use solar panels that meet the following specifications to charge the product. Voltage range: 12-59 V DC, rated output power (discharge): 800 W maximum.
This product uses MPPT (Maximum Power Tracking) technology, which can compare the output voltage point of the solar panel with the battery voltage of the product in real time to find the maximum power output point that the solar panel can provide and charge the battery of the unit with best charging efficiency. * Actual power output depends on weather).
Q: How can I extend the life or better maintain my floor mounted product?
A: If your balcony is frequently flooded, we recommend raising the product. This will prevent malfunctions due to prolonged submersion.
Chemical composition of toxic and harmful substances
O: The content of hazardous substances in homogeneous materials of all components complies with the requirements of specification GB-T 26572....
X: The content of hazardous substances in at least one of the average materials of the part exceeds the requirements of specification GB-T 26572 and currently there is no mature alternative in the industry that meets the environmental protection requirements of the EU RoHS Directive.
This information is for reference only and does not constitute a binding agreement. Product features (colour, size, OSD, etc.) may differ from the actual product.
BE COOL
Technical data
| BC-B2500 | ||
| General | Capacity | 2,240 Wh |
| Cell chemistry | LiFePO4 | |
| Life cycle | 6000+, 25 °C | |
| Storage temperature | -10°C - 55°C | |
| Operating temperature | 0°C - 50°C | |
| Material | ABS + PC + metal | |
| Weight | 19±0.5kg | |
| Dimensions | 350 x 290 x 160mm | |
| Battery management system | OVP,UVP,OCP,SCP,OTP,UTP,etc. | |
| Entrance | PV input | 500Wx2 Max |
| Battery voltage range | 42V ~ 50.4V | |
| Charging voltage | 12V ~ 59V | |
| Output | DC output | 400Wx2 Max |
| DC voltage range | 42V ~ 50.4V | |
| Discharge current | 19,04A Max | |
| Expandable | The BC-B2500 is expandable with up to 2 pieces of BP-P2500 or BC-P2500 to increase the total storage capacity from 2,240Wh to a maximum of 6,720Wh. | |
BE COOL
Disclaimer
Our company is not liable for damage caused by fire, earthquake, use by third parties, other accidents, wilful misconduct by the customer, improper use or other abnormal conditions. DO NOT repair damage yourself. The warranty covers all conditions stated in the warranty. We do not accept any liability for contents not listed in the warranty conditions. Our company accepts no liability for damage caused by improper use or failure to observe these operating instructions.
BE COOL
GUARANTEE
With this quality product from BE COOL, you have chosen innovation, durability and reliability.
For this BE COOL unit we grant a warranty period of 2 years from the date of purchase, valid in Austria, Germany, Sweden, the Netherlands, Romania, the Czech Republic and Slovakia! If, contrary to expectations, service work should nevertheless be necessary on your unit during this period, we guarantee a free repair (spare parts and labour) or (at the discretion of Schuss) a replacement of the product. If, for economic reasons, neither repair nor replacement is possible, we reserve the right to issue a credit note for the current value. In the event of warranty claims, please contact your specialist dealer or us directly. We would like to point out that repairs which are not carried out by the authorised contract workshop in Austria immediately terminate the validity of this warranty.
This guarantee does not apply to:
Repair or replacement of parts due to normal wear and tear
- Damage due to non-observation of the operating instructions
Devices that have been used - even only partially - for commercial purposes
Devices that have been mechanically damaged by external impact (fall, impact, breakage, improper use, etc.) as well as wear and tear of an aesthetic nature.
- Equipment that has been improperly handled
Units that have not been opened by our authorised service workshop
- Equipment that does not meet consumer expectations
- Damage caused by force majeure, water, lightning, overvoltage
Units where the type designation and/or serial number on the unit has been altered, erased, made illegible or removed.
Services outside our authorised workshops, the transport costs to an authorised workshop or to us and back, and the associated risks
We expressly point out that a flat rate of € 60 (Consumer Price Index 2010, June 2015) will be charged within the warranty period in the event of operating errors or if no error was detected.
The absolute guarantee period of 2 years from the date of purchase is not extended by the provision of guarantee services (repair or replacement of the unit). The 2-year warranty is only valid on presentation of the purchase receipt (must contain the name and address of the dealer as well as the complete designation of the unit) and the corresponding warranty certificate, on which the unit type as well as the serial number (readable on the box and on the back or bottom of the unit) must be noted! Without presentation of the warranty certificate, only the legal warranty applies! We expressly point out that the statutory warranty rights are not affected by this warranty and continue to apply in full. Schuss Home Electronic GmbH and its vicarious agents are only liable for damages in the event of gross negligence or intent. In any case, liability for lost profit, expected but not occurred savings, consequential damages and damages from third party claims is excluded. Damage to or for recorded data is generally excluded from liability.
Congratulations on your choice. We hope you enjoy your BE COOL appliance!
ADDRESS
Schuss Home Electronic GmbH
1140 Vienna, Scheringgasse 3
Tel.: +43 (0)1/970
Type designation:
Serial number:
In the event of a warranty claim, this warranty certificate must be handed over together with the unit to the authorised service workshop or the dealer from whom you purchased the unit!
BE COOL
EU DECLARATION OF CONFORMITY
EU DECLARATION OF CONFORMITY
The sole responsibility for issuing this declaration of conformity lies with the manufacturer.
This declaration of conformity is issued under the sale responsibility of the manufacturer.
Schuss Home Electronic GmbH
Scheringgasse 3
1140 Vienna, AUSTRIA
Declaresthattheproduct
Declaresthattheproduct
Manufacturer
Manufacturer
BE COOL
Designation
Designation
Balcony power storage system
Model number
Model number
BC-B2500
complies with the following directives, standards and/or regulations:
is conformity with following directives, norms and/or regulations:
RED Directive DIRECTIVE 2014/53/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 April 2014 on the harmonisation of the
laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC Official Journal of the EU L 153/62 22.5.2014
DIRECTIVE 2014/51/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010 in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European
Supervisory Authority (European Securities and Markets Authority)
Health and safety
EN 62109-1:2010
EN 62109-2:2011
EMC Directive: 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106.
EMC Directive (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
EN 301489-1 V2.2.3 (2019-11)
EN 301489-17 V3.2.4(2020-09)
EN 61000-6-1/2/3/4
Radio
EN 300328 V2.2.2 (2019-07)
BE COOL
EU DECLARATION OF CONFORMITY
EU DECLARATION OF CONFORMITY
RoHS Directive: 2011/65/EU Directive of the European Parliament and of the Council
of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110
RoHS Directive: 2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110
Signed for and on behalf of:/ Signed for and on behalf of: SCHUSS HOME ELECTRONIS GMBH
Place and date of the exhibition:
Place and date of issue:
Vienna, 2023-08-22
Authorized representative of manufacture
Scharl, Alexander
Senior product and purchasing manager i.V.
Name, Funktion / name, function Unterschrift / signature
Declaration reference:
Declaration reference:
SCHUSS HOME ELECTRONIC GMBH
Scheringgasse 3, 1140 Vienna, AUSTRIA
Subject to changes and printing errors, the current version is available for download:
