eSC-Ad10 - Roller Be Cool - Free user manual and instructions

Product type	Electric scooter
Brand	Be Cool
Model	eSC-Ad10
Dimensions (unfolded)	1100 x 485 x 1215 mm (L x W x H)
Dimensions (folded)	1100 x 485 x 485 mm (L x W x H)
Net weight	14.85 kg
Max load capacity	100 kg
Max speed	25 km/h (modes: Eco 15 km/h, Standard 20 km/h, Sport 25 km/h, Pedestrian 5 km/h)
Max range	25 km (typical, depending on conditions)
Max gradient	10%
Suitable terrain	Asphalt, flat pavement; obstacles <1 cm, gaps <3 cm
Motor rated power	350 W
Battery type	Lithium-ion
Battery capacity	270 Wh, 36 VDC nominal
Charging time	5-6 hours
Charger input/output	110-240 VAC / 42 VDC
IP rating	IPX4 (splash water resistant, not waterproof)
Operating temperature	-10°C to 40°C
Storage temperature	0°C to 40°C
Display features	Speed, battery level, operating mode, Bluetooth indicator, error codes
Riding modes	Eco, Standard, Sport, Pedestrian (5 km/h)
Cruise control	Yes (activate by holding throttle 5s)
Kick-start required	Yes (must push off to at least 5 km/h before throttle works)
Bluetooth app	Be Cool app (iOS/Android) for settings, locking, etc.
Tire type	Tubeless pneumatic tires
Brake type	Manual brake lever (rear wheel)
Warranty (scooter)	2 years from purchase (Austria)
Warranty (battery)	6 months from purchase (Austria)
Included accessories	Charger, screws, hexagon wrench, operating instructions
Assembly required	Yes (fold out stand, mount handlebar, tighten screws)
Maintenance	Wipe with damp cloth; avoid solvents; store dry; charge regularly

Frequently Asked Questions - eSC-Ad10 Be Cool

How do I turn on the e-scooter?

Press the power button briefly to switch on. Long press to switch off. When on, single press toggles front light.

What is the kick-start feature?

The scooter requires a kick-start: you must push off with your foot to reach at least 5 km/h before the throttle becomes active. This prevents accidental acceleration.

How do I change speed modes?

Quickly press the power button twice to cycle through modes: ECO (15 km/h, max range), D (Standard, 20 km/h), S (Sport, 25 km/h), and pedestrian mode (5 km/h).

Can I ride in the rain?

No. The scooter has IPX4 splash water resistance but is not waterproof. Avoid rain, puddles, and wet conditions to prevent damage and warranty void.

How do I activate cruise control?

While riding at a constant speed, press and hold the throttle lever for 5 seconds. The scooter will maintain that speed. Tap the brake or accelerator to deactivate.

What does the Bluetooth symbol mean?

A flashing Bluetooth symbol means the scooter is ready to pair. A solid symbol indicates it is connected to a mobile device via the Be Cool app.

How should I charge the battery?

Open the rubber cover on the side, insert the charger plug, and close the cover after charging. Only use the original charger. Avoid full discharge; charge when at least 1 bar remains.

Who should not ride this e-scooter?

People with visual, balance, coordination, reflex, muscle or bone problems, pregnant women, children under 10, and those under influence of drugs/alcohol. Children 10-12 require a cycling license and adult supervision.

How do I fold and carry the scooter?

Switch off the scooter, open the folding mechanism, fold the handlebar down and hook it onto the bracket on the mudguard. Then carry it by the stem.

What is the maximum weight limit?

The maximum load capacity is 100 kg. Exceeding this can damage the scooter and lead to safety hazards.

USER MANUAL eSC-Ad10 Be Cool

Line drawing of a fully electric scooter with two wheels and a side-mounted suspension (no text or symbols)

Current operating instructions and other languages

Download the latest operating instructions in various languages via the link www.becool.at/downloads or scan the QR code shown. Follow the instructions on the website.

BE COOL

Line drawing of a fully electric scooter with visible battery pack and side-mounted steering wheel (no text or symbols)

3.2 Zubehör

1x Ladegerät

4x Schrauben

Line drawing of a scooter with wheels and a hand gripping a cable, shown with an inset close-up of the handle (no text or symbols)

Symbolbild

Line drawing of a scooter with wheels and a side-mounted tool, shown with an inset close-up (no text or symbols)

Symbolbild

Technical line drawing of a scooter with an inset showing internal components (no text or symbols)

Symbolbild

Line drawing of a scooter with wheels and a hand-in-view inset showing the lever mechanism (no text or symbols)

Symbolbild

Line drawing of a scooter with extended boom and battery, showing internal components (no text or symbols)

Pure technical line drawing of a mechanical component inside a circular frame (no text or symbols)

Symbolbild

Simple line drawing of a mechanical component inside a circular frame (no text or symbols)

Symbolbild

Pure technical line drawing of a mechanical component inside a circular frame (no text or symbols)

Symbolbild

Apple

Android

Side-view illustration of a person wearing a helmet and pointing to a device (no text or symbols present)

Line drawing of a scooter with an inset showing a mechanical component (no text or symbols)

Line drawing of a person riding a scooter with helmet (no text or symbols)

Illustration of a person using a scooter with a hand gesture and circular motion diagram (no text or symbols)

Line drawing of a person riding a scooter with motion arrows, showing a circular diagram and motion lines (no text or symbols)

Three human figures in safety gear standing with arrows indicating motion or force direction (no text or symbols)

Line drawing of a person walking with a stick in the rain, standing on a puddle (no text or symbols)

Line drawing of a person riding a scooter, wearing a helmet and uniform (no text or symbols)

Line drawing of a person standing in the doorway with another figure visible on the side (no text or symbols)

Simple line drawing of a person riding a scooter with motion lines indicating speed (no text or symbols)

Line drawing of a person using a scooter with a hand gesture diagram nearby (no text or symbols)

Simple line drawing of a person standing with a stick and lightning bolt symbol (no text or labels)

Simple line drawing of a person riding a motorcycle (no text or symbols)

Line drawing of a person riding a scooter with a helmet (no text or symbols)

Line drawing of a person riding a scooter on a road with a car nearby (no text or symbols)

Three identical line drawings of a person standing on a scooter, with curved arrows indicating motion or movement (no text or symbols)

Line drawing of a person using a scooter to clean or污垢 (no text or symbols)

Line drawings of two people using a scooter, one standing and one seated, both wearing helmets (no text or symbols)

Two identical line drawings of a person using a wheeled scooter, shown in side profile (no text or symbols)

Operating instructions

Operation manual

E-scooter eSC-Ad10

Line drawing of a fully electric scooter with two wheels and a side-mounted suspension (no text or symbols)

CONGRATULATIONS!

THANK YOU FOR CHOOSING A PRODUCT FROM BE COOL.

These operating instructions are available in the following languages

EN

GERMAN

Page 2 - 17

EN

ENGLISH

Page 18 - 33

BE COOL

Current operating instructions and other languages

Download the latest operating instructions in various languages via the link www.becool.at/downloads or scan the QR code shown. Follow the instructions on the website.

Current operating instructions and other languages

Download the latest operating instructions in various languages via the link www.becool.at/downloads or scan the QR code shown. Follow the instructions on the website.

BE COOL

1. SPECIAL SAFETY INSTRUCTIONS

PLEASE READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE OPERATING OR SERVICING YOUR SCOOTER. PROTECT YOURSELF AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO FOLLOW INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.

The exclamation mark in the triangle indicates to the user that there are important instructions or explanations regarding the operation and/or maintenance of the device. Please read the

Read the operating instructions carefully before using the appliance.

WARNING:

To reduce the risk of electric shock, remove

Do not open the housing of this device. There are no

Parts that can be repaired by the user. Therefore, do not attempt to repair or maintain internal parts yourself.

Leave repairs to qualified service personnel.

KICK-STARTER

Please note that the scooter has a kick-start. This means that you first have to accelerate to get going and only then can you accelerate using the throttle lever.

ATTENTION!

Do not drive in rain or wet conditions - the device is NOT WATERPROOF!

Do not use for jumps or stunts!

Do not use on slippery surfaces!

Do not use under the influence of drugs or alcohol! Avoid paths with obstacles such as branches, garbage or stones!

Avoid steep inclines!

Do not drive faster than recommended!

Do not load the device more than permitted!

ATTENTION!

Persons with visual, balance, coordination, reflex, muscle or bone problems MUST NOT use this vehicle!

ATTENTION!

Children under the age of 10 are NOT allowed to ride the device! Children between the ages of 10 and 12 may only use the scooter if they have a cycling license and

are accompanied by a supervisor who is at least 16 years old - however detailed instructions on how to use the scooter in a safe manner must be provided beforehand and the existing dangers must be described.

Helmets are also compulsory for children up to the age of 12.

BE COOL

2. GENERAL SAFETY INSTRUCTIONS

- Carefully remove the packaging and make sure that the scooter is not damaged.

- Do not use the device if it is visibly damaged.

- We recommend wearing qualified protective clothing such as helmets, hand and knee protectors, etc., as required for comparable sports.

- Before you get on the scooter, make sure that you have positioned the scooter on a level surface and that the scooter is switched on.

- Do not open or modify the scooter, otherwise the manufacturer's warranty will be invalidated and malfunctions may occur which could lead to serious physical injury or even death.

- Only ride the scooter in places where riding the scooter is expressly permitted. Only use the scooter outside public places and in places where you do not pose a danger to yourself others or other people's property.

- Never use the scooter under the influence of alcohol and/or drugs.

- Never use the scooter if you are overtired or unfocused. Always be alert and recognize a dangerous situation at an early stage.

- Avoid sudden changes of direction - especially at high altitudes. Speeds.

- Make sure that the charging socket cover is always in place.

- The scooter is subject to protection class IPX4 and is therefore only spray water resistant, NOT WATERPROOF. Avoid riding through water or rain, as this could damage you scooter and any resulting damage is excluded from the warranty.

- Do not ride through puddles, mud, sand, stones, gravel, grit or on unsuitable, rough terrain. On uneven surfaces, it is advisable to carry the scooter until a suitable riding surface is found.

The scooter is not suitable for "OFF-Road" use.

- Do not ride in bad weather such as snow, rain, hail, icy roads or in extreme heat - DANGE OF CRASH!

- Avoid driving near swimming pools or other large pools of water.

- Prevent riding over obstacles, bumps that are higher than 1.5 cm - even if you are an experienced scooter rider.

- Do not talk on the phone or text while driving. Drive attentively and be aware of your surroundings: road conditions, people, objects, etc.

- Do not ride the scooter in places with a lot of people. Ride the scooter with the utmost care and pay attention to people and objects in the vicinity.

- Do not ride up and down steep hills ( >15^ ). On gentle hills and terrain with slight bumps, it helps to bend your knees slightly while riding to absorb shocks and vibrations. This allows you to maintain your balance on slightly uneven terrain up to a certain intensity.

- Never attempt to ride with several people at the same time. The scooter is only suitable for riding with a single person.

- Do not transport any objects while driving.

- People with balance problems should not ride the scooter.

BE COOL

- Do not ride the scooter during pregnancy.

- Please note that the braking distance increases proportionally at higher speeds.

- Never get on or off with a jump. Do not attempt any stunts or tricks with the scooter.

• Take particular care when driving in the dark or in poorly lit areas.

- Do not exceed or fall below the specified weight limit of the scooter.

- Avoid driving in dangerous places to prevent fire and explosion accidents caused by, for example: flammable gases, vapors, liquids, dust, fibers.

- Comply with all national and local laws that apply to your region with regard to the use of your scooter.

- Drive on sight and always be ready to brake.

• The use of any other charger may result in damage to the device and other potential risks.

- Avoid discharging the battery completely. It is best to charge the battery when there is still a certain residual capacity (at least 1 bar on the display). This will extend the service life of the battery.

- Place the battery away from fire or corrosive environments while charging as it is classified as flammable and explosive.

- Do not attempt to open the battery housing. If you notice any damage, please contact the Service Center.

- Do not charge the device in direct sunlight or in the immediate vicinity of naked flames or open flames.

- The scooter must not be used while charging.

Riding the scooter is at your own risk and responsibility.

Not all hazards that could lead to injury or even death can be covered in this manual.

ATTENTION!

Note on deep discharge of the battery

The service life and performance of a battery depends on its age, care and how often it has been used.

Compared to other battery models, lithium-ion batteries have a very low self-discharge rate.

Charge at least 80% of the capacity if the battery is not used for more than 30 days. It is better to charge the battery to 100% every 90 days to protect the function of the battery.

Please note that a deeply discharged battery is irreparably damaged and must be replaced at your expense, which is why the battery should never be fully discharged during operation!

RECYCLING

The packaging materials can be recycled. It is therefore recommended to dispose of them in sorted waste.

BE COOL

DISPOSAL

The "crossed-out dustbin" symbol requires the separate disposal of waste electrical and electronic equipment (WEEE). Electrical and electronic equipment may contain hazardous and environmentally harmful substances. Therefore, do not dispose of them in unsorted residual waste, but at a designated collection point for waste electrical and electronic equipment. This will help to protect resources and the environment.

For further information, please contact your dealer or the local authorities.

DECLARATION OF CONFORMITY

We hereby confirm that this article complies with the basic requirements, regulations and directives of the EU.

You can view the detailed declaration of conformity at any time under the following link:

www.becool.at/downloads

Errors and technical changes excepted.

www.becool.at

BE COOL

3. CONTENTS

3.1 E-scooter

Line drawing of a fully electric scooter with visible battery pack and side-mounted steering wheel (no text or symbols)

3.2 Accessories

1x These operating instructions

Please check carefully that the contents of the box are intact.

BE COOL

1. INTRODUCTION OF THE PRODUCT
   

Tubeless Pneumatic tires

BE COOL

5. OPERATION

Speed display	Displays the current speed. Also displays error codes if errors are detected
Battery indicator	Displays the remaining battery level with 5 bars. Each bar corresponds to approximately 20 % energy.
Operating mode	Quickly press the power button twice to change the mode:ECO symbol: ECO mode (minimum speed 15km/h, increased range)D symbol: Standard mode (average speed 20 km/h, average range)S symbol: Sport mode (maximum speed 25 km/h, shorter range)Pedestrian symbol: Pedestrian mode, 5 km/h speed.
Cruise control	Press the gas pedal lever and hold it down for 5 seconds at the same speed to activate cruise control.Press the accelerator or brake again to deactivate cruise control mode
Bluetooth	A flashing Bluetooth symbol indicates that the vehicle is ready to establish a connection. A solid Bluetooth symbol indicates that the vehicle is connected to a mobile device
Power button	Press briefly to switch on. Long press to switch off. When the scooter is switched on, you can switch the front light on and off with one click. Double-click to change the operating mode
Temperature display	Overheating indicator lights up: the temperature of the controller exceeds 80°C
Fault display	Device error indicator lights up: Contact our service department.

BE COOL

6. ASSEMBLY

6.1 Assembling

Line drawing of a scooter with two wheels and an inset showing the lever mechanism (no text or symbols)

1. fold out the stand of the e-scooter and close the folding mechanism.

Line drawing of a scooter with an inset showing the internal components (no text or symbols)

1. mount the handlebar grip on the handlebars

Technical line drawing of a scooter with labeled components and an inset showing internal mechanical assembly (no text or symbols)

1. use the hexagon wrench from the package to install the screws on both sides

Line drawing of a scooter with wheels and a side view showing mechanical components (no text or symbols)

1. check the operating display after assembly is complete

6.2 Charging

Line drawing of a scooter with attached electrical circuit lines (no text or symbols)

Pure technical line drawing of a mechanical component inside a circular frame (no text or symbols)

Symbol

Simple line drawing of a mechanical component with a curved handle and cable (no text or symbols)

Symbol

Pure technical line drawing of a mechanical component or bracket (no text or symbols)

Symbol
1. open the rubber cover on the side
2. insert the charging plug into the charging socket
3. close the rubber cover after charging

7. use of the app

BE COOL

8.) Open the relevant app store on your smartphone and search for "Be Cool" or alternatively scan the following QR code to match your smartphone:

Apple

Android

9.) Switch on your e-scooter and open the "Be Cool" app. Wait a short moment until your e-scooter appears in the app
10.) Click on your e-scooter and wait until your e-scooter is connected to the app.
11.) As soon as the e-scooter is connected to the app, the Bluetooth® symbol on the e-scooter lights up continuously and the start screen appears in the app.
12.) The following functions are available:

Current driving speed

Total mileage

Cruise control On/Off

Battery capacity

Speed mode Toggle

Further information on the e-scooter

Kilometers currently driven

Bluetooth® On/Off

Locking/unlocking the e-scooter

Estimated range

Lighting On/Off

Settings

13.) Settings:

Unit: Switch the speed display between km/h and mp/h

Cruise control: Switch the cruise control function on or off

Cruise control maximum speed: Set the maximum speed for the cruise control function

Battery capacity: Set the corresponding battery capacity of your e-scooter according to the technical data

Driving mode: Set the desired speed level

"-mode" maximum speed: Set the desired maximum speed according to the set speed level

Zero start: Switch the kick-start on or off. Please note, when the "Zero-Start" function is switched on, the e-scooter starts immediately when you press the throttle. The e-scooter does not need to be dived into. ATTENTION: Risk of injury!

Side-view illustration of a person wearing a helmet and holding a device, with no visible text or symbols

As there is a risk of falling while riding, always wear a helmet and protective equipment.

Line drawing of a scooter with a hand extended, showing front wheel and side suspension (no text or symbols)

1. switch on the device and check the operating display

Line drawing of a person riding a scooter wearing a helmet (no text or symbols)

1. place one foot on the footboard and push off with the other foot to get going.

Illustration of a person using a scooter with a hand gesture and circular motion diagram (no text or symbols)

1. now also raise the second foot as soon as the scooter is moving and then press the gas pedal lever to accelerate (only accelerate when the speed of the scooter exceeds 5 km/h = kick-start).

Line drawing of a person riding a scooter with motion arrows, showing gear movement and a circular diagram (no text or symbols)

1. release the gas pedal lever when braking. Pull firmly on the brake if you need to brake urgently.

Three human figures in helmets and suits standing with a bicycle, viewed from behind (no text or symbols)

1. tilt your body slightly to the left to ride to the left. Tilt your body slightly to the right if you want to ride to the right. Turn the handlebars in the desired direction.

BE COOL

9. SAFETY NOTE

Line drawing of a person standing in the rain with a stick and pipe, holding a tool, standing on a puddle (no text or symbols)

Use in rain or frost is not recommended.

Line drawing of a person riding a scooter, wearing a helmet and uniform (no text or symbols)

It is recommended that you bend your knees slightly to adapt better to an uneven road. Maintain a low speed (5-10 km/h) when riding on an uneven road.

Line drawing of a person standing in a doorway with another person visible in the background (no text or symbols)

Always be aware of your surroundings to avoid injuring yourself or others.

Line drawing of a person riding a scooter with motion lines indicating speed (no text or symbols)

Do not accelerate when driving down a hill.

Line drawing of a person using a scooter with a hand gesture diagram nearby (no text or symbols)

Do not press the gas pedal lever while pushing the scooter.

Simple line drawing of a person standing on a rock with a lightning bolt symbol (no text or labels)

Pay attention to your lane and drive around obstacles.

BE COOL

Line drawing of a person riding a bicycle (no text or symbols)

Do not hang rucksacks and other heavy objects on the handlebar grip.

Line drawing of a person riding a scooter with motion lines (no text or symbols)

It is forbidden to place only one foot on the running board while riding.

Line drawing of a person riding a scooter on a road with a car nearby (no text or symbols)

It is forbidden to ride a scooter in the overtaking lane for motor vehicles.

Three identical line drawings of human figures in a standing pose with curved arrows indicating motion or movement (no text or symbols)

It is forbidden to turn sharply in a residential area with high pedestrian traffic.

Line drawing of a person using a scooter with motion lines indicating speed (no text or symbols)

It is not recommended to drive through puddles.

Line drawings of two people using a scooter, one standing and one seated, both wearing helmets (no text or symbols)

The scooter may only be used by one person at a time.

BE COOL

Line drawing of a person riding a scooter with one hand raised, no text or symbols present

Do not ride without using your hands.

Two line drawings of a person performing a jump on a scooter, one falling and the other riding (no text or symbols)

Do not ride the electric scooter up/down steps or jump over obstacles.

10. CARRY & STOW

Make sure that the e-scooter is switched off. Open the folding mechanism. Fold the handlebar over and secure it by hooking it onto the folding bracket on the mudguard.

Line drawing of two identical figures standing on a shared scooter, viewed from the side (no text or symbols)

You can easily carry the scooter after folding it up.

Take care not to bump into people or other objects with the scooter.

BE COOL

11. CLEANING AND MAINTENANCE

If the surface of the scooter is dirty, please use a soft cloth dipped in a little water to wipe it clean.

Tip: Do not use alcohol, petrol, kerosene or other volatile chemical solvents for cleaning, as this will significantly damage the appearance and internal structure of the body. The use of a high-pressure cleaner for cleaning is prohibited. Please ensure that the product is switched off and the rubber cover of the charging contact is firmly closed, as otherwise electric shocks may occur or water ingress may cause damage to the scooter.

Store indoors in a dry and cool place, avoid outdoor storage periods. Exposure to sunlight/overheated/undercooled outdoor areas will accelerate the appearance and aging of the tires and reduce the service life of the battery.

12. BATTERY MAINTENANCE

• Only use the original charger for charging, otherwise there is a risk of damage or fire.
• Improper disposal of used batteries can lead to serious environmental pollution. Observe the local regulations when disposing of this battery.
• Fully charge the battery before storage to extend its service life.

Please do not expose the battery to high temperatures above 40 °C or low temperatures below -10 °C (e.g. do not expose to sunlight in summer). For further information on battery maintenance, please refer to the battery rating plate on the housing.

Avoid discharging the battery completely. With high mileage, the service life and performance of the battery will decrease if it is used at temperatures below 0 °C . At an ambient temperature of -10 °C , the battery performance may only be half or less. Battery performance is restored as the temperature rises.

Note: When fully charged, the stored power is used up after approx. 60-90 days; when incompletely charged, the time to complete discharge is reduced. If the battery is not charged in good time, this can lead to excessive discharge of the battery and irreparable damage to it. A fully discharged battery is excluded from the warranty. (Note: Only service workshops authorized by Schuss Home Electronic may disassemble the battery without authorization, otherwise an electric shock or short circuit may be caused. This would be a safety incident that could lead to a serious accident).

BE COOL

13. TECHNICAL DATA

	Properties		Parameters
Dimension	L x W x H (folded)		1100 x 485 x 485 cm
	L x W x H		1100 x 485 x 1215 cm
Weight	Net		14.85 kg
Driving characteristics	Max. Load capacity		100 kg
Device parameters	Max. Speed		25km/h
	Max range [1]		25 km
	Max. Gradient		10%
	Accessible terrain		Asphalt/flat pavement; obstacles<1cm, gaps<3cm)
	Operating temperature		-10-40°C
	Storage temperature		0-40°C
	IP Rating		IPX4
	Nominal voltage		36VDC
Battery	Max. Charging voltage		42VDC
	Max. Charging time		5-6h
	Nominal Capacity [2]		270Wh
Motor	Input voltage		110-240 VAC
	Output voltage		42VDC
	Rated power		350W
Contact addresses for further Information on		Schuss Home Electronic GmbH Scheringgasse 3 A-1140 Vienna Phone: [phone] www.becool.at FB-No.: 236974 t / FB-Court: Vienna
Service line		DEC Digital-Electronic-Center Service GmbH Kelsenstrasse 2 A-1030 Vienna Phone: [phone] E-mail: [e-mail]

[1] Typical range: tested at full power, 75kg load, 25°C, 60% of max. speed on average on asphalt. The actual range may vary due to load, temperature, wind speed, road and operating habits and other factors.

Note: The data and parameters vary for the different models. Subject to change without notice.

[2] All scooter models can have different battery capacities. Some parameters such as the range would change in this case.

BE COOL

WARRANTY

With this quality product from BE COOL, you have made a decision for innovation, durability and reliability.

We grant the following warranty periods for this BE COOL appliance:

E-Scooter: 2 years from date of purchase valid in Austria

Rechargeable battery: 6 months from date of purchase valid in Austria

If, contrary to expectations, warranty work is nevertheless necessary on your device during this period, we hereby guarantee you a free repair (spare parts and labor) or (at the discretion of Schuss Home Electronic GmbH) to replace the product. If neither repair nor replacement is possible for economic reasons, we reserve the right to issue a time value credit note.

Please contact your specialist dealer or us directly. We would like to point out that repair work that has not been carried out by our authorized workshops in Austria will immediately invalidate this warranty.

This guarantee does not cover

• Repair or replacement of parts due to normal wear and tear
• Water damage
• We do not accept any liability for consequential damage in the event of improper use
• Damage due to non-compliance with the operating instructions
• Devices that are used - even partially - for commercial purposes
• Devices mechanically damaged by external influences (fall, impact, breakage, improper use, etc.) and signs of wear and tear Of an aesthetic nature.
• Damage caused by force majeure, water, lightning or overvoltage are attributable.
• Devices where the type designation and/or serial number on the device has been changed, deleted, made illegible or removed.
• services outside our authorized workshops, the transport costs to an authorized workshop or to us and back, as well as the associated risks.

Compatibility problems with other devices, even if they come from the seller.

We would like to emphasize that within the warranty period, a lump sum of € 40,- (indexed based on CPI 2010, June 2015) will be charged for operating errors or if no error is detected.

The provision of a warranty service (repair or replacement of the device) does not extend the absolute warranty period of 2 years from the date of purchase.

The 2-year guarantee is only valid on presentation of the proof of purchase (must include the name and address of the dealer as well as the complete device designation) and the corresponding guarantee certificate, on which the device type and serial number must be noted.

Without presentation of the warranty certificate, only the statutory warranty applies!

We expressly point out that the statutory warranty rights are not affected by this guarantee and remain unaffected.

Schuss Home Electronic GmbH and its vicarious agents shall only be liable for damages in the event of gross negligence or intent.

Liability for loss of profit, expected but unrealized savings, consequential damages and damages from third party claims is excluded.

Damage to or for recorded data is always excluded from the liability for damages.

Congratulations on your choice. We wish you lots of fun with your Be Cool e-scooter!

ADDRESS

Schuss Home Electronic GmbH

A-1140 Vienna, Scheringgasse 3

In the event of a warranty claim, this warranty certificate must be handed over together with the device to the dealer from whom you purchased the device!

BE COOL

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Schuss Home Electronic GmbH

Scheringgasse 3

1140 Wien, AUSTRIA

Declares, that the product

is conformity with following directives, norms and/or regulations:

of 16 April 2014 amending Directives 2003/71/EC and 2009/138/EC and Regulations (EC) No 1060/2009, (EU) No 1094/2010 and (EU) No 1095/2010 in respect of the powers of the European Supervisory Authority (European Insurance and Occupational Pensions Authority) and the European Supervisory Authority (European Securities and Markets Authority)

Article 3.1(a) Safety:

EN IEC 62368-1:2020 + A11:2020

Article 3.1(a) Health:

EN 62479:2010

EN 50665:2017

Article 3.1(b) EMC:

ETSI EN 301 489-1 V2.2.3 (2019-11)

ETSI EN 301 489-17 V3.2.4 (2020-09)

Article 3.2 Radio:

EN 300 328 V2.2.2 (2019-07)

EMC Directive (EMC): 2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96, 29/03/2014, p. 79–106

EN IEC 55014-1:2021

EN IEC 6100-3-2:2019+A1:2021

EN 6100-3-3:2013+A1:2019+A2:2021+AC:2022-01

EN IEC 55014-2:2021

Low Voltage Directive (LVD):2014/35/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits; Official Journal of the EU L96, 29/03/2014, p. 357–374

EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+A15:2021

EN 62233:2008

EN 17128:2020

RoHS Directive: 2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174, 1/07/2011, p. 88–110

IEC 62321-3-1:2013, IEC 62321-4:2013+AMD1:2017, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-7-1:2017, IEC 62321-8:2017

Reach SVHC/ECINO. 1907/2006 Schuss Home Electronic GmbH hereby confirms that in the products we supply, there are no substances of very high concern (SVHC) in the candidate list (last ECHA update from June 14, 2023, 235 substances) above 0.1% in accordance with Article 33 of the REACH Regulation (EC) No .1907/2006 are included.

Place and date of issue:

Vienna, 2024-04-03

Declaration reference:

SCHUSS HOME ELECTRONIC GMBH

Scheringgasse 3, 1140 Wien, AUSTRIA

Senior product and purchasing manager i.

Authorized representative of manufacture

Name, Funktion / name, function

Unterschrift / signature