IAN 310831 - Uncategorized CRIVIT - Free user manual and instructions

USER MANUAL IAN 310831 CRIVIT

KEEP ALL SAFETY AND OTHER INSTRUC-

TIONS HANDY FOR FUTURE USE! CAUTION! RISK OF INJURY! WARNING. Do not use for extensive swimming or swimming practice!

The product may be used only at the wa- ter surface. Not suitable for diving since no pressure compensation is possible.

• The product is intended only for persons with a high lung capacity.

• The mask body may only be used in conjunction with the snorkel attached.

• All use of the product requires precise knowledge of and compliance with the instructions for use.

• Never leave children unsupervised with the packaging material. There is danger of suffocation.

• Check the product before use each time for any damage. Discontinue use of the product if you notice damage to the body of the mask, headband, or snorkel.

• The orange top of the snorkel may not be removed. Its purpose is to make it easier for other water sports enthusiasts (e.g. boaters) to see you. It is also an important component part without which the snorkel no longer functions.

• The snorkel is designed to reduce the amount of surface water splash that gets in. It also has an “Aquastop System” with an internal float gauge that closes if you inadvertently dive below the surface. Before using each time make sure that the float gauge in the snorkel is moving freely.

• Do not expose the product to any extreme temperatures or severe mechanical stress.

• Before using make sure that hair, jewellery items, clothes, etc. do not come between the snorkel mask and your face otherwise the product does not fit tightly and water can get in.

• Never pull the snorkel mask away from your face because it may snap back and cause injury to your eyes.

• Avoid looking directly into the sun.

• Should eyes or skin become irritated, discon- tinue use of the product.

• The product’s service life depends on how it is used. However, the product must be replaced max. five years after the date of manufacture (01/2019).

• The tightness of the snorkel mask depends on the fit and size of the seal against the face. The headband secures the snorkel mask and should therefore be tightened just enough to allow it to sit comfortably.

• Get used to using the product gradually. Do not wear it for too long at first. If you become tired take the product off immediately.

• To avoid heat build-up under the snorkel mask or fogging, it should be taken off briefly from time and aired out when outside temperatures are elevated.9 General information The CE symbol confirms conformity with the PPE Regulation 2016/425/ EU. Tested at TÜV Rheinland LGA Products GmbH, Tillystr. 2, D-90431 Nurem- berg, Germany, Notified Body: 0197. Full conformity declaration is available under http:// www.conformity.delta-sport.com/ Date of manufacture (month/year): 01/2019 Symbols used Total View Panoramic Lens - Extra-wide field of vision Easy Fit - Easily adjustable headband 100% UV protection - The lens ab- sorbs100% of harmful UV rays Dry Top protects against water splash entering Silikon High-quality elastic plastic highly water- and heat-resistant WARNING. For use only at the water surface! WARNING. Do not use for diving! Integrated camera mount For use by people with a high lung capacity EN1972:2015 (Class A) Note: Snorkel sizes are divided into two categories. Class A is suitable for use by people with a high lung capacity. Class B is suitable for use by people with a low lung capacity (e.g. children). General intended use The product serves as a visual aid when snor- kelling and protects the eyes from direct contact with water. To facilitate snorkelling and to make it easier to move forwards we recommend the use of fins. Size selection S/M (SM-5789-S/M) L/XL (SM-5790-L/XL) 10 – 11.5cm

Measure the distance from the bridge of your nose to the bottom of your chin with your mouth closed and select the product size accordingly. Note: To check the product’s fit put the product on without the snorkel. Place your hand on the snorkel connection and breathe in. If the product presses against your face, it is tight. Attaching the snorkel (fig. B) Attach the snorkel to the frame of the mask until it snaps in securely. Removing the snorkel Press the button on the mask frame and pull the snorkel off. Putting on the snorkel mask (fig. C)

• Loosen both ends of the headband. With one hand hold the snorkel mask in front of your face.

• With the other hand carefully guide the headband behind the back of your head. Pull evenly on both ends of the headband until the mask sits firmly and comfortably. Make sure that the snorkel mask seals tight and that no water can enter. GB/IE10 Removing water If some water gets into the product despite the splash protection, you can remove it from the product by pumping the blow-out valve quickly and vigorously to blow it out. Removing the snorkel mask Loosen both ends of the headband. Carefully pull the headband off from the back of your head over your forehead. Correcting vision defects Should you wish to minimise a vision defect by putting in corrective lenses, contact a specialised dealer or your optician. Attaching the camera mount (fig. D) To use the product with the camera mount, proceed as follows: Remove the snorkel. Push the camera mount onto the snorkel and attach the snorkel to the mask frame. Attach your camera (not included in scope of delivery) to the camera mount. Cleaning, care, storage

• Take the snorkel off the body of the mask and rinse both parts after use each time with clean water. Then let them dry properly.

• Always store the product clean and dry at room temperature.