R 1250 GS (2020) - Motorcycle BMW - Free user manual and instructions

USER MANUAL R 1250 GS (2020) BMW

Side view of a black BMW i35 motorcycle with visible engine and alloy components (no text or symbols)

Données de la moto

Modèle

Labeled diagram of a car engine showing numbered components for automotive assembly or maintenance reference.

Labeled diagram of a mechanical control knob with numbered parts for identification

CONTACT AVEC KEYLESS RIDE 66

COUPE-CIRCUIT 71

APPEL D'URGENCE INTELLIGENT 71

ÉCLAIRAGE 74

ÉCLAIRAGE DE JOUR 75

FEUX DE DÉTRESSE 77

CLIGNOTANTS 78

CONTRÔLE DE MOTRICITÉ (DTC) 79

RÉGLAGE ÉLECTRONIQUE DU CHÂSSIS (D-ESA) 80

MODE DE CONDUITE 83

ALARME ANTIVOL (DWA) 93

CONTRÔLE DE LA PRESSION DES PNEUS (RDC)

CHAUFFAGE

96

96

64 UTILISATION

SERRURE DE CONTACT/AN- TIVOL DE DIRECTION

Clé de contact

CONDITION 1 2M 35mp

Mise du contact

Condition préalable

Diagram of a mechanical component with numbered parts labeled 1, 2, and 3

Diagram of a mechanical device with numbered components, likely illustrating a gear or component assembly.

Close-up of a camera's grip and lever mechanism, showing key adjustment buttons (no text or symbols visible)

1 Coupe-circuit

STOP A B

Diagram of a mechanical device with numbered components and an arrow indicating direction or movement

Technical diagram of a mechanical device with numbered components labeled 3 and 4

Close-up of a robotic hand gripping a mechanical component, no visible text or symbols

ÉCLAIRAGE

Close-up of a mechanical brake lever mechanism with no visible text or symbols

Close-up of a mechanical control knob with a blue indicator arrow pointing to the number 1 (no text or symbols on the knob itself)

Close-up of a mechanical hand gripping a brake caliper with buttons and dials (no visible text or symbols)

Close-up of a mechanical brake lever with adjustment knobs and a blue circular marker labeled '1' (no text or symbols on the lever itself)

Close-up of a black brake switch mechanism with control buttons and lever arms (no visible text or symbols)

Close-up of a black brake switch mechanism with control buttons and a blue circular indicator labeled '1' (no text or symbols on the mechanism itself)

Close-up of a mechanical brake lever with adjustment knobs and a blue circular marker labeled '1' (no text or symbols on the lever itself)

- Maintenir la touche 1 enfon-

Close-up of a mechanical device with a blue circular marker labeled '1' pointing to a button (no readable text or symbols beyond the label)

Close-up of a mechanical control switch with a blue circular marker labeled '1' pointing to the dial (no text or symbols beyond the label)

Close-up of a mechanical brake lever with adjustment knobs and a blue circular marker labeled '1' (no text or symbols on the lever itself)

Close-up of a mechanical brake caliper with adjustment knobs and a blue circular marker labeled '1' (no text or symbols on the caliper itself)

Close-up of a mechanical device's grip and lever mechanism, showing a blue circular indicator labeled '1' pointing to a button (no readable text or symbols beyond the label)

Close-up of a mechanical lever mechanism with a blue indicator light and numbered label (1), no readable text or symbols beyond the indicator.

ATTENTION

1 SET FREE OFF/ON

Mechanical lever diagram showing hand and shaft assembly with blue directional arrows indicating motion (no text or symbols)

I'Hill Start Control Pro

Mechanical lever diagram showing hand and shaft assembly with blue directional arrows indicating motion (no text or symbols)

ALARME ANTIVOL (DWA)

Activation

3D rendered image of a device with a circular button and label '1' (no text or symbols on the object itself)

Illustration of a device with a button and label pointing to it (no text or symbols present)

3D rendered image of a device with a circular button and label '1' (no text or symbols on the object itself)

Close-up of a mechanical component with a blue circular marker labeled '1' pointing to a specific area (no text or symbols beyond the marker)

Application BMW Motorrad Connected

Diagram showing mechanical components with numbered annotations and blue directional arrows indicating motion or flow

Diagram of a mechanical component with numbered parts and directional arrows indicating motion or flow.

Close-up of a mechanical component with blue directional arrows indicating motion or movement (no text or symbols)

Close-up of a robotic hand with blue directional arrows indicating movement or force (no text or symbols)

ISM exempte de licence (In-sdustrial, Scientific and Medical

Close-up of a mechanical component with blue arrows indicating motion or movement, no visible text or symbols

Diagram of a mechanical device with labeled components and directional arrows indicating motion or flow.

Close-up of a robotic hand with blue arrows indicating motion or movement, no text or symbols present

Close-up of a black and white object resembling a stylus or mirror, with no visible text or symbols.

Diagram showing a mechanical joint or connector with labeled parts 1 and 2, likely illustrating a welding or assembly process.

Diagram of a mechanical component with blue arrows indicating rotation or movement, no text or symbols present

Diagram of a mechanical component with numbered parts labeled 1, 2, 3, and 4

Close-up of a mechanical component with a blue indicator light and number 1 marked (no readable text or symbols)

Mechanical assembly diagram showing a bracket and pipe connection (no text or symbols)

EMBRAYAGE

Embrayage

AVERTISSEMENT

Close-up of a mechanical component with a blue circular label pointing to a numbered point (1), no readable text or symbols present.

Diagram of a car interior showing labeled parts with numbered annotations

1 10° 0 10° 0

surface plane et stable.

Diagram of a motorcycle seat with labeled parts 1 and 2, showing structural components and directional arrows.

Close-up of a mechanical component with a blue arrow and numbered label (1), no readable text or symbols present.

la ré- es ec entre us-

Diagram of a toy car with numbered labels pointing to specific parts, likely for assembly or maintenance instructions.

Diagram of a mechanical device with labeled parts 1 and 2, showing structural components and motion paths.

Diagram of a mechanical assembly with numbered components and blue arrows indicating motion or flow paths.

Mechanical component diagram showing a curved assembly with labeled part '1' (no text or symbols on the main diagram)

Close-up of a mechanical assembly with a blue indicator light and number 1 marked on the component (no readable text or symbols beyond the number)

AVERTISSEMENT

Close-up of a robotic arm with a blue arrow pointing to a small mechanical component (no text or symbols visible)

Mechanical assembly diagram showing a blue circular component labeled '1' connected to a mechanical bracket (no readable text or symbols)

Diagram showing a mechanical component with labeled parts 1 and 2, likely illustrating a process or assembly.

Close-up of a mechanical component with a blue 'MAX' label, no readable text or symbols on the main structure.

Close-up of a metallic circular component with a blue arrow indicating direction, no visible text or symbols

Close-up of a mechanical component with a blue 'MAX' label, no readable text or symbols on the main structure.

Diagram of a device component with numbered parts labeled 1 and 2, showing internal structure and mounting points.

Black-and-white photo of a motorcycle on a vehicle (no visible text or symbols)

ATTENTION

Close-up of a mechanical assembly with visible gears and levers (no text or symbols)

Close-up of a motorcycle wheel with visible mechanical components (no text or symbols)

Diagram showing four types of wrenches with numbered labels pointing to their positions.

Mechanical component assembly diagram showing shafts, bolts, and housing (no text or labels)

Mechanical assembly diagram showing a wheel mounted on a support frame with a blue arrow indicating motion direction (no text or symbols)

Technical diagram of a mechanical assembly with labeled components 1 and 2

up-! ATTENTION qui-

Close-up of a mechanical component with a blue arrow pointing to a circular feature labeled '1' (no text or symbols on the main subject)

ATTENTION

Diagram of a mechanical assembly with numbered components and directional arrow indicating rotation or movement

Close-up of a mechanical component with a blue numbered marker (1) pointing to a specific part, no visible text or symbols beyond the number.

Mechanical component with blue directional arrows indicating flow or movement (no text or symbols)

Close-up of a motorcycle wheel assembly with visible tire, suspension components, and a numbered blue marker (1) on the wheel (no text or symbols beyond label)

3D rendered mechanical component with two vertical pins and a central protrusion (no text or symbols)

AVERTISSEMENT

1,0 mm (Uniquement garniture de friction sans plaque support.)

Close-up of a BMW GS motorcycle's head and side panel, no visible text or symbols on the body itself

- Poser les vis 1.

1

- Poser les vis 1.

PNEUS

Technical diagram of a mechanical assembly with numbered components labeled 1 to 4

Technical diagram of a mechanical assembly with numbered components labeled 1, 2, and 3

Mechanical assembly diagram showing a gear and wheel components with a numbered label (1) pointing to a specific part.

Mechanical assembly diagram showing a shaft and housing component (no text or symbols visible)

Technical diagram of a mechanical assembly with labeled components 1 and 2

Close-up of a mechanical assembly with gears and a blue numbered component (no visible text or symbols)

Mechanical assembly diagram showing a gear and shaft component (no text or symbols)

Mechanical assembly diagram showing a shaft and housing component (no text or symbols visible)

Technical diagram of a mechanical assembly with labeled components 1 and 2

Diagram of a mechanical component with numbered parts labeled 3 and 4, likely indicating parts of a device or assembly.

Technical diagram of a mechanical assembly with numbered components labeled 1 and 2

Close-up of a mechanical component with no visible text or symbols

Interior view of a vehicle battery pack with no visible text or symbols

Mechanical component diagram with numbered annotations (1 and 2) indicating specific parts, no readable text or symbols present.

Technical diagram of an automotive engine compartment with numbered annotations pointing to components

Interior view of a vehicle battery pack with no visible text or symbols

Technical diagram of a mechanical assembly with numbered components labeled 1 and 2

Close-up of a mechanical component with a blue circular indicator labeled '1' pointing to a specific part (no text or symbols on the main structure)

Close-up of a mechanical assembly with blue arrows pointing to components, no visible text or symbols

Close-up mechanical assembly showing internal components and a numbered label (1) pointing to a specific part.

1 50 A

Technical diagram of a mechanical assembly with labeled components 1 and 2, showing a blue arrow pointing to a component.

Close-up of a mechanical assembly with a numbered label '5' pointing to a component (no readable text or symbols beyond the number)

Diagram of a car interior with numbered components and directional arrows indicating motion or movement.

Close-up of a mechanical component with a blue circular indicator labeled '1' pointing to a section (no text or symbols beyond the number)

Diagram of a car with numbered components and directional arrows indicating motion or flow

Dépose de la valise

1 2 3 ure elle se. de

Diagram showing two labeled parts (1 and 2) with blue arrows pointing to features, likely illustrating a mechanical or architectural concept.

Diagram showing two labeled components (1 and 2) with blue arrows pointing to a mechanical or electronic component.

Diagram showing two labeled components (1 and 2) with blue arrows indicating connection or movement, likely illustrating a mechanical or electrical assembly.

Diagram of a car with labeled parts and directional arrows indicating motion or movement

Close-up of a mechanical device with a blue indicator light labeled '1' pointing to a component (no text or symbols on the device itself)

3D illustration of an open mechanical device with a blue circular indicator labeled '1' (no text or symbols on the device itself)

Diagram of a car air intake system with numbered components and directional arrow indicating flow or movement

Diagram of a device interior with labeled parts, showing numbered annotations for component identification.

Close-up of a mechanical device with labeled parts (1 and 2), no visible text or symbols beyond labels

Close-up of a mechanical component with blue annotation line and number 1, no readable text or symbols

Close-up of a mechanical component with labeled parts (1, 2), no readable text or symbols beyond labels

Diagram of a mechanical device showing internal components and directional arrows (no text or symbols)

ATTENTION

Close-up of a mechanical component with a blue label pointing to a numbered feature (no readable text or symbols)

Diagram of a car interior showing labeled parts: engine compartment, dashboard, and seatbelt.

Close-up of a mechanical component with a blue label pointing to a numbered point (1), showing internal structure without any readable text or symbols.

Diagram of a device component with numbered labels pointing to specific parts

Close-up of a mechanical component with a blue circular marker labeled '1' pointing to a specific part (no text or symbols beyond the label)

Diagram of a vehicle's internal components with numbered parts and directional arrows indicating flow or movement.

Diagram of a vehicle battery pack with numbered components and directional arrows indicating flow or movement.

Diagram of a vehicle battery rear panel with numbered components and blue directional arrows indicating flow or movement.

Diagram of a vehicle engine compartment with numbered parts and directional arrows indicating flow or movement.

Diagram showing mechanical components with numbered labels 1 and 2, indicating directional movement or flow.

DONNÉES TECH- NIQUES

12

TABLEAU DES ANOMALIES 254

VISSAGES 257

CARBURANT 260

HUILE MOTEUR 261

MOTEUR 261

EMBRAYAGE 262

BOÎTE DE VITESSES 262

PROPULSION 263

CADRE 264

CHÂSSIS 264

FREINS 265

ROUES ET PNEUS 266

SYSTÈME ÉLECTRIQUE 267

ALARME ANTIVOL 269

DIMENSIONS 269

POIDS 272

PERFORMANCES

Declaration of Conformity

Radio equipment electronic immobiliser (EWS)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band: 134 kHz (Transponder: TMS37145 / TypeDST80, TMS3705 Transponder Base Station IC) Output Power: 50 dBμV/m

Manufacturer and Address

Hereby, BECOM Electronics GmbH declares that the radio equipment type EWS4 is in compliance with Directive 2014/53/EU53 The full text of the EU declaration of conformity is available at the following internet address: http://www.becom.at/de/download/

Greece

Hereby, BECOM Electronics GmbH declares that the radio equipment type EWS4 is in compliance with Directive 2014/53/EU53.

The full text of the EU declaration of conformity is available at the following internet address: http://www.becom.at/de/download/

Italy

Ring aerial in the ignition switch

Close-up of a black industrial control knob with no visible text or symbols

To verify the authorization of the ignition key, the electronic immobilizer exchanges information with the ignition key via the ring aerial.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly

approved by the party responsible for compliance could void the user's authority to operate the equipment.

Close-up of a black industrial control knob with adjustment knobs and a circular dial (no text or symbols visible)

Declaration of Conformity

Radio equipment Keyless Ride

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency band: 434,42 MHz Maximum Transmission Power: 10 mW

Manufacturer and Address

Manufacturer: Huf Hülsbeck & Fürst GmbH & Co. KG Adress: Steeger Str. 17, 42551 Velbert, Germany

Bülgarski

Hereby, Huf Hülsbeck & Fürst GmbH & Co. KG declares that the radio equipment type HUF5750 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.huf-group.com/eudoc

Español

3D rendered image of a black and silver remote control device with a circular dial and control panel (no text or symbols visible)

USA, Canada:

Product name: BMW Keyless Ride ID

Device FCC ID: YGOHUF5750

IC: 4008C-HUF5750

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Canada:

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

USA:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Argentina:

Declaration Of Conformity

We declare under our responsibility that the product

BMW Keyless Ride ID Device (Model: HUF5750)

camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards:

1. Health and safety requirements contained in article 3 (1) a)

- EN 60950-1:2006+A11:2009+A1:2010+A12:2011; Information technology equipment-Safety

1. Protection requirements with respect to electromagnetic compatibility article 3 (1) b)

- EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements

- EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short range devices (SRD) operating on frequencies between 9 kHz and 40 GHz

1. Means of the efficient use of the radio frequency spectrum article 3 (2)

- EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW;

Part 1: Technical characteristics and test methods.

Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TIE directive

The product is labeled with the CE marking:

CE

Velbert, October 15 ^th , 2013

Dr. Aie

Benjamin A. Müller

Product Development Systems

Car Access and Immobilization -

Steeger Straße 17, D-42551

Velbert

Declaration of Conformity

Radio equipment tyre pressure control (RDC)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band: 433.895 - 433.945 MHz Output Power: <10 mW e.r.p.

Manufacturer and Address

Manufacturer: Schrader Electronics Ltd. Adress: Technology Park, Antrim, N. Ireland BT41 1QS, United Kingdom

Austria

Hereby, Schrader Electronics Ltd. declares that the radio equipment type BC5A4 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.tpmseuroshop.com/

documents/

declaration_conformities

Greece

Hereby, Schrader Electronics Ltd. declares that the radio equipment type BC5A4 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.tpmseuroshop.com/documents/declaration_conformities

Italy

http://www.tpmseuroshop.com/documents/declaration_conformities

Malta

B'dan, Schrader Electronics Ltd., niddikjara li dan it-tip ta' taghmir tar-radju BC5A4 huwa konformi mad-Direttiva 2014/53/UE. Ittest kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li gej: http://www.tpmseuroshop.com/documents/declaration_conformities

Netherlands

Certification Tire Pressure Control (TPC)

FCC ID: MRXBC54MA4 IC: 2546A-BC54MA4

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

FCC ID: MRXBC5A4 IC: 2546A-BC5A4

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

Declaration of Conformity

Radio equipment intelligent emergency call

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Antenna internal: Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 22 dBm Not acessable by user: Frequency Band: 1710 MHz - 1785 MHz Radiated Power [TRP]: < 26 dBm Frequency Band: 1920 MHz - 1980 MHz Radiated Power [TRP]: < 22 dBm Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 23 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Austria

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type TPM E-CALL EU is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Greece

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type TPM E-CALL EU is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Italy

Declaration of Conformity

Radio equipment anti-theft alarm (DWA)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band:

433.05-434.79 MHz

Output Power: 10 mW e.r.p.

Manufacturer and Address

Manufacturer: Meta System S.p.A.

Adress: Via Galimberti 5 42124

Reggio Emilia - Italy

Austria

Hereby, Meta System S.p.A. declares that the radio equipment type TXBMWMR is in compliance with Directive 2014/53/8 The full text of the EU declaration of conformity is available at the following internet address: https://docs.metasystem.it/

Greece

Hereby, Meta System S.p.A. declares that the radio equipment type TXBMWMR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://docs.metasystem.it/

Italy

Declaration of Conformity

Radio equipment TFT instrument cluster

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

BT operating frq. Range: 2402 – 2480 MHz BT version: 4.2 (no BTLE) BT output power: < 4 dBm WLAN operating frq. Range: 2412 – 2462 MHz WLAN standards: IEEE 802.11 b/g/n WLAN output power: < 20 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Austria

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type ICC6.5in is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Greece

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type ICC6.5in is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Italy

Declaration of Conformity

Radio equipment TFT instrument cluster

For all Countries without EU

Technical information

BT operating frq. Range: 2402 – 2480 MHz BT version: 4.2 (no BTLE) BT output power: < 4 dBm WLAN operating frq. Range:: 2412 – 2462 MHz WLAN standards: IEEE 802.11 b/g/n WLAN output power: < 20 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Turkey

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

(This telecommunication equipments is in compliance with NTC requirements)

United States (USA)

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Coupure du contact, 68