F 900 XR (2020) - Motorcycle BMW - Free user manual and instructions

Product Type	Motorcycle (Adventure Sport)
Brand	BMW Motorrad
Model	F 900 XR (2020)
Engine	Liquid-cooled, 4-stroke, 2-cylinder in-line, 895 cc, 77 kW (105 hp) at 8,500 rpm, 92 Nm at 6,500 rpm
Transmission	6-speed, constant mesh
Clutch	Multi-plate wet clutch, mechanically operated
Frame	Steel bridge frame with bolted rear frame
Front Suspension	43 mm upside-down fork, compression and rebound damping adjustable
Rear Suspension	Cast aluminum dual swing arm, central spring strut, spring preload and rebound damping adjustable
Brakes Front	Dual disc, 320 mm, 4-piston calipers
Brakes Rear	Single disc, 265 mm, 2-piston caliper
ABS	BMW Motorrad ABS (partially integral)
Wheelbase	1,590 mm
Seat Height	825 mm (standard)
Length	2,160 mm
Width (with mirrors)	860 mm
Height (without mirrors)	1,310 mm
Kerb Weight (ready to ride)	219 kg
Maximum Permissible Weight	436 kg
Fuel Capacity	15.5 liters
Display	6.5-inch TFT color display with Bluetooth and WLAN
Keyless Ride	Available (optional)
Lighting	Full LED headlight, LED turn indicators, LED taillight
Rider Assistance	ABS, Dynamic Traction Control (DTC), Engine Drag Torque Control (MSR), Rain & Road riding modes
Maintenance Interval	Every 10,000 km or 12 months

Frequently Asked Questions - F 900 XR (2020) BMW

What engine oil does the BMW F 900 XR require?

The engine requires a high-quality 4-stroke motor oil meeting BMW specification BMW Advantec Ultimate Oil with viscosity SAE 5W-30 or 5W-40, API SJ or higher.

How often should I change the oil on my F 900 XR?

Oil change is recommended every 10,000 km (6,200 miles) or once a year, whichever comes first.

What is the correct tyre pressure for the BMW F 900 XR?

For solo riding: front 2.5 bar (36 psi), rear 2.9 bar (42 psi). With passenger or luggage: front 2.5 bar, rear 2.9 bar. Always check when tyres are cold.

How do I reset the TFT display or adjust settings?

Use the multi-controller on the left handlebar to navigate menus. Press 'MENU' to enter settings, then select System Settings for date, time, language, and Bluetooth pairing.

My F 900 XR shows an ABS warning – what should I do?

A yellow ABS warning indicates a fault. Continue riding carefully to a BMW specialist workshop. Avoid rapid braking or wheel lock-ups. The system may still provide limited functionality.

Can I pair my phone to the motorcycle via Bluetooth?

Yes, the TFT display supports Bluetooth for calls, media, and navigation. Go to Settings > Bluetooth and follow the pairing procedure on both devices.

What does the 'Keyless Ride' battery weak warning mean?

The remote key battery is low (50% remaining) and may soon affect central locking. Replace the battery with a CR2032 button cell as soon as possible.

How do I adjust the suspension on the F 900 XR?

Front fork has adjustable compression and rebound via top knobs. Rear shock has adjustable spring preload (through a twist ring) and rebound damping (with a screw). Consult manual for specific settings.

What is the warranty period for a new BMW F 900 XR?

Standard BMW Motorrad warranty is 36 months from first registration, unlimited mileage in some regions. Extended warranty options are available.

How to clean the motorcycle without damaging components?

Use a mild motorcycle cleaner and soft sponge. Avoid high-pressure washers near bearings, brakes, and electrical connectors. After washing, dry thoroughly and lubricate chain. Use a microfiber cloth for the TFT screen.

USER MANUAL F 900 XR (2020) BMW

Red and gray BMW 3 Series motorcycle with visible branding (no text or symbols on body)

Údaje o vozidlu

Model

PŘEHLED DISPLEJE TFT SPORT 1

Dialog Check-Control

Remote key not in range. Not possi- to switch on igni- n again.

Možná příčina:

Remote key battery at 50%. No functio-impairment.

Remote key battery weak. Limited cen- l locking function. nge battery.

Možná příčina:

Vehicle voltage low. Switch off necessary consumers.

Vehicle voltage critical! Consumers

were switched off. Check battery condition.

38 UKAZATELE

VAROVÁNÍ

Front right turn indicator faulty!

Vehicle voltage critical! Battery is

Low-beam headlight faulty!

not being charged. Check battery status.

Front side light faulty!

Daytime riding light faulty!

Tail light faulty!

Brake light faulty!

Rear left turn indicator faulty!, popř.

Rear right turn indicator faulty!

Number plate light faulty!

-Have it checked by a specialist workshop.

bliká žlutě.

Active headlight faulty. Have it

checked by a specialist workshop.

VAROVÁNÍ

① capacity weak. No restrictions. Make an appointment at a specialist workshop.

Alarm system battery empty. No independent alarm. Make an ap- pointment at a specia- list workshop.

Coolant temperature too high! Check co-nt level. Continueving in part. load to l down.

POZOR

Engine! Have it checked by a specialist workshop.

Možná příčina:

No communication with engine cont- Multiple sys. af- ted. Ride carefully the next specialist workshop.

Fault in the engine control. Onwardney possible Ridefully to next specialist workshop.

VAROVÁNÍ

Serious fault in the engine control! Riding at mod. speed pos. Damage possible. Have checked by workshop.

VAROVÁNÍ

Tyre pressure does not match setpoint Check tyre pressure.

Možná příčina:

Tyre pressure does not match setpoint

Stop immediately! Check tyre pressure.

Tyre press. control. Loss of pres-

sure. Stop immediately! Check tyre pressure.

VAROVÁNÍ

RDC sensor battery weak. Function limited. Have it checked by specialist workshop.

Drop sensor faulty. Have it checked by a specialist workshop.

Možná příčina:

Emergency call failure. Make an appointment at a special workshop.

aMožná příčina:

Side stand monito- ring faulty. Onward

journey possible. Engine stop. when stationary! Have checked by workshop.

Možná příčina:

Limited ABS availability! Onward journey possible. Ride carefully to next specialist workshop.

Možná příčina:

ABS failure! Onward journey possible.

Ride carefully to next specialist workshop.

Mtožná příčina:

Rídicí jednotka ABS zjistila po- ruchu.

Onward journey possible. Ride carefully to next specialist workshop.

48 UKAZATELE

Možná příčina:

Traction control de-activated.

ná příčina:

Řidič vypnul systém ASC/DTC.

Traction control limited! Onward journey possible. Ride carefully to next specialist workshop.

Možná příčina:

Traction control failure! Onward journey possible.

Ride carefully to next specialist workshop.

Možná příčina:

Spring strut adjustment faulty! Onward journey possible. Ride carefully to next specialist workshop.

Možná příčina:

Service due! Have service performed by a specialist workshop.

Možná příčina:

Service overdue! Have service performed by a specialist workshop.

Možná příčina:

Close-up of a mechanical component with numbered callouts (1 and 2) and an arrow indicating a specific feature (no readable text or symbols)

Remote key battery weak. Limited central locking function. Change battery.

• Vyměňte baterii.

Close-up of a mechanical brake switch mechanism with no visible text or symbols

Close-up of a mechanical hand gripping a brake caliper with control buttons and lever (no text or symbols visible)

Close-up of a mechanical device with control buttons and a labeled section (1), no readable text or symbols beyond the label.

Close-up of a hand holding a wristwatch with control buttons and a numbered indicator (1), no readable text or symbols present.

Close-up of a mechanical hand gripping a brake switch and lever (no text or symbols visible)

Close-up of a mechanical device with a rotary switch and control buttons (no visible text or symbols)

Close-up of a hand holding a brake wrench and grip mechanism, with no visible text or symbols

Close-up of a mechanical hand gripping a brake switch with control buttons (no visible text or symbols)

Close-up of a mechanical hand gripping a brake switch with control buttons (no visible text or symbols)

Close-up of a mechanical hand gripping a brake switch with control buttons (no visible text or symbols)

Close-up of a mechanical hand tool with control buttons and a numbered indicator (no readable text or symbols)

Close-up of a black mechanical device with labeled buttons and a numbered indicator (1), no readable text or symbols beyond the number.

Simple diagram of a device with a numbered label (1) pointing to its top section, no text or symbols present.

figuration (pod Shift light).

Illustration of a camera lens with a labeled button (1), no text or symbols present.

Illustration of a camera lens with a labeled button (no text or symbols beyond the number 1)

Illustration of a camera lens with labeled component (1), no text or symbols present

Illustration of a camera lens with labeled component (1), no text or symbols present

Mechanical component diagram showing a rotating knob with a numbered label (1), no readable text or symbols present.

Close-up of a mechanical component with directional arrows indicating movement or assembly (no text or symbols visible)

Close-up of a mechanical lever mechanism with directional arrows indicating motion (no text or symbols)

- Vyvolejte menu Settings, System settings, Date and time.

Close-up of a mechanical component with directional arrows indicating movement or force (no text or symbols present)

-At current location

-At destination

-Along the route

• Vyberte a potvrd'te Start route guidance.

•Vyvolejte menu Navigation, Active route guidance.

•Vyberte a potvrd'te End route guidance.

• Vyvolejte menu Navigation, Active route guidance.
• Vyberte a potvrd'te Current instruction.

MÉDIA

Předpoklad

•Vyvolejte menu Media.

BMW Motorrad doporu- -Vyberte Playlists.

Close-up of a mechanical device with directional arrows indicating movement or force (no text or symbols visible)

Close-up of a black and white car wheel rim with a curved handle (no text or symbols)

Close-up of industrial machinery components with a numbered circular component (1) on the base, no visible text or symbols.

VAROVÁNÍ

Close-up of a bicycle hand handle with a numbered label (1) pointing to the lever (no text or symbols on the diagram itself)

! VAROVÁNÍ

Mechanical assembly diagram showing a car suspension system with labeled component 1 (no text or symbols beyond label)

VAROVÁNÍ

Close-up of a mechanical assembly with a numbered component (1) and spring-like components, no visible text or symbols.

Abstract grayscale graphic with curved arrows and a numbered circle, no readable text or symbols

Close-up of a mechanical device's grip and lever mechanism, showing buttons and a numbered label (1) without any readable text or symbols.

Mechanical assembly diagram showing a lever mechanism with numbered label (1), no readable text or symbols present.

Mechanical component diagram showing a gear assembly with numbered parts (1 and 2), no readable text or symbols present.

Cross-sectional illustration of a mechanical component with a labeled MAX (no other text or symbols)

Cross-sectional illustration of a mechanical component with a labeled MAX button (no other text or symbols)

Black-and-white photo of a motorcycle on a flatbed trailer, showing engine and wheel assembly (no text or symbols visible)

Close-up of mechanical components including suspension and wheel assembly (no visible text or symbols)

POZOR

Close-up of a mechanical component with no visible text or symbols

Mechanical component with cylindrical parts and a spring-loaded assembly (no visible text or symbols)

Two white bicycle ladders with wheels, no text or symbols visible

Illustration of a white bicycle support structure with two wheels and a curved handle (no text or symbols)

Close-up of a BMW engine component with no visible text or symbols

Close-up of a BMW engine component with no visible text or symbols

Mechanical assembly diagram showing a wheel with brake and suspension components (no text or symbols)

Pure mechanical component diagram without any text, numbers, or symbols

Mechanical assembly diagram showing a brake caliper and suspension components (no text or symbols visible)

Mechanical component diagram showing a lever and shaft assembly (no text or symbols)

Mechanical assembly diagram showing gear and shaft components (no text or labels)

Close-up of a car wheel and dashboard components with numbered annotation (1), no readable text or symbols beyond the number.

Close-up of a brake caliper assembly with no visible text or symbols

Mechanical assembly diagram showing a brake caliper and suspension components (no text or symbols)

Mechanical assembly diagram showing a numbered component (4) with no visible text or symbols

Close-up of a mechanical component with a numbered label (5) pointing to a small cylindrical feature, no readable text or symbols present.

Close-up of a mechanical gear assembly with a numbered label (5) pointing to a central component (no readable text or symbols beyond the number)

Mechanical assembly diagram showing a numbered component (4) with no visible text or symbols

Close-up of a brake caliper assembly with no visible text or symbols

Mechanical assembly diagram showing a chain drive mechanism with no visible text or symbols

Close-up mechanical assembly showing gears and a knob (no visible text or symbols)

Close-up of a bicycle's wheel and gear mechanism, showing gears and chains (no text or symbols visible)

Mechanical assembly diagram showing a motor and gear components with a numbered label (10), no readable text or symbols present.

Mechanical assembly diagram showing a motor with gear and a numbered component (no readable text or symbols)

Close-up of a bicycle's wheel and gear assembly with labeled component (7), no readable text or symbols beyond the number.

Mechanical assembly diagram showing a gear mechanism with no visible text or symbols

Mechanical assembly diagram showing a motor with labeled component 'A' (no text or symbols beyond label)

Close-up of mechanical components with numbered callouts (3, 4) indicating specific parts (no readable text or symbols)

Close-up of a mechanical component with a numbered label (1) pointing to a section, no readable text or symbols present.

POZOR

Close-up of a mechanical component with a numbered circular marker and a hand holding a tool (no readable text or symbols)

Aerial view of an aircraft engine bay with visible tracks and structural components (no text or symbols)

CESTOVNÍ KUFR

Mechanical component diagram showing a rotating shaft and housing with a numbered label (1), no readable text or symbols present.

Mechanical component with directional arrow and numbered label (1), no readable text or symbols beyond the number and arrow indicator)

Close-up of a mechanical component with a pull button and labeled part (1), no readable text or symbols beyond the label.

Close-up of a mechanical component with a handle and circular detail, labeled with number 1 (no text or symbols on the main subject)

POZOR

Prach a nečistoty na kontak- tech Mount Cradle

Poškození kontaktů

OŠETŘUJÍCÍ PROSTŘEDKY

MYTÍ MOTOCYKLU

ELEKTRICKÁ INSTALACE 218

VÝSTRAŽNÝ SYSTÉM PROTI KRÁDEŽI 219

ROZMĚRY 219

HMOTNOSTI 220

JÍZDNÍ VÝKONY 221

208 TECHNICKÉ ÚDAJE

TABULKA ZÁVAD

Motor nestartuje:

Příčina Odstranění

ELEKTRICKÁ INSTALACE

Declaration of Conformity

Radio equipment electronic immobiliser (EWS)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band: 134 kHz (Transponder: TMS37145 / TypeDST80, TMS3705 Transponder Base Station IC) Output Power: 50 dBμV/m

Manufacturer and Address

Hereby, BECOM Electronics GmbH declares that the radio equipment type EWS4 is in compliance with Directive 2014/53/EU53 The full text of the EU declaration of conformity is available at the following internet address: http://www.becom.at/de/download/

Greece

Hereby, BECOM Electronics GmbH declares that the radio equipment type EWS4 is in compliance with Directive 2014/53/EU53.

The full text of the EU declaration of conformity is available at the following internet address: http://www.becom.at/de/download/

Italy

Ring aerial in the ignition switch

Close-up of a black industrial rotary knob with adjustment knobs and a handle (no text or symbols visible)

To verify the authorization of the ignition key, the electronic immobilizer exchanges information with the ignition key via the ring aerial.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly

approved by the party responsible for compliance could void the user's authority to operate the equipment.

Close-up of a black industrial control switch component (no text or symbols visible)

Declaration of Conformity

Radio equipment Keyless Ride

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency band: 434,42 MHz Maximum Transmission Power: 10 mW

Manufacturer and Address

Manufacturer: Huf Hülsbeck & Fürst GmbH & Co. KG Adress: Steeger Str. 17, 42551 Velbert, Germany

Bülgarski

Hereby, Huf Hülsbeck & Fürst GmbH & Co. KG declares that the radio equipment type HUF5750 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.huf-group.com/eudoc

Español

3D rendered image of a black and silver remote control device with a circular dial and control panel (no text or symbols visible)

USA, Canada:

Product name: BMW Keyless Ride ID

Device FCC ID: YGOHUF5750

IC: 4008C-HUF5750

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Canada:

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

USA:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Argentina:

Declaration Of Conformity

We declare under our responsibility that the product

BMW Keyless Ride ID Device (Model: HUF5750)

camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards:

1. Health and safety requirements contained in article 3 (1) a)

- EN 60950-1:2006+A11:2009+A1:2010+A12:2011; Information technology equipment-Safety

1. Protection requirements with respect to electromagnetic compatibility article 3 (1) b)

- EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements

- EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short range devices (SRD) operating on frequencies between 9 kHz and 40 GHz

1. Means of the efficient use of the radio frequency spectrum article 3 (2)

- EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW;

Part 1: Technical characteristics and test methods.

Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TIE directive

The product is labeled with the CE marking:

CE

Velbert, October 15 ^th , 2013

Benjamin A. Müller

Product Development Systems

Car Access and Immobilization -

Steeger Straße 17, D-42551

Velbert

Declaration of Conformity

Radio equipment tyre pressure control (RDC)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band: 433.895 - 433.945 MHz Output Power: <10 mW e.r.p.

Manufacturer and Address

Manufacturer: Schrader Electronics Ltd. Adress: Technology Park, Antrim, N. Ireland BT41 1QS, United Kingdom

Austria

Hereby, Schrader Electronics Ltd. declares that the radio equipment type BC5A4 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.tpmseuroshop.com/

documents/

declaration_conformities

Greece

Hereby, Schrader Electronics Ltd. declares that the radio equipment type BC5A4 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.tpmseuroshop.com/documents/declaration_conformities

Italy

http://www.tpmseuroshop.com/documents/declaration_conformities

Malta

B'dan, Schrader Electronics Ltd., niddikjara li dan it-tip ta' taghmir tar-radju BC5A4 huwa konformi mad-Direttiva 2014/53/UE. Ittest kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li gej: http://www.tpmseuroshop.com/documents/declaration_conformities

Netherlands

Certification Tire Pressure Control (TPC)

FCC ID: MRXBC54MA4 IC: 2546A-BC54MA4

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

FCC ID: MRXBC5A4 IC: 2546A-BC5A4

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

Declaration of Conformity

Radio equipment TFT instrument cluster

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

BT operating frq. Range: 2402 – 2480 MHz BT version: 4.2 (no BTLE) BT output power: < 4 dBm WLAN operating frq. Range: 2412 – 2462 MHz WLAN standards: IEEE 802.11 b/g/n WLAN output power: < 20 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Austria

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type ICC6.5in is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Greece

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type ICC6.5in is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Italy

Declaration of Conformity

Radio equipment TFT instrument cluster

For all Countries without EU

Technical information

BT operating frq. Range: 2402 – 2480 MHz BT version: 4.2 (no BTLE) BT output power: < 4 dBm WLAN operating frq. Range:: 2412 – 2462 MHz WLAN standards: IEEE 802.11 b/g/n WLAN output power: < 20 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Turkey

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

(This telecommunication equipments is in compliance with NTC requirements)

United States (USA)

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Declaration of Conformity

Radio equipment intelligent emergency call

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Antenna internal: Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 22 dBm Not acessable by user: Frequency Band: 1710 MHz - 1785 MHz Radiated Power [TRP]: < 26 dBm Frequency Band: 1920 MHz - 1980 MHz Radiated Power [TRP]: < 22 dBm Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 23 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Austria

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type TPM E-CALL EU is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Greece

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type TPM E-CALL EU is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Italy

Declaration of Conformity

Radio equipment anti-theft alarm (DWA)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band:

433.05-434.79 MHz

Output Power: 10 mW e.r.p.

Manufacturer and Address

Manufacturer: Meta System S.p.A.

Adress: Via Galimberti 5 42124

Reggio Emilia - Italy

Austria

Hereby, Meta System S.p.A. declares that the radio equipment type TXBMWMR is in compliance with Directive 2014/53/8 The full text of the EU declaration of conformity is available at the following internet address: https://docs.metasystem.it/

Greece

Hereby, Meta System S.p.A. declares that the radio equipment type TXBMWMR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://docs.metasystem.it/

Italy

Please note the following in addition to the information provided in the Owner's Handbook.

WARNING

The battery inside the vehicle key is a button cell. Batteries or button cells can be swallowed, causing serious or even fatal injuries within two hours, e.g. due to internal burns or cauterisations. There is a danger of injury or danger to life. Keep vehicle keys and batteries out of the reach of children. Seek medical assistance immediately if you suspect that a battery or button cell has been swallowed or has got into a part of the body.

NOTE

Using unsuitable batteries in a vehicle key can damage the vehicle key. There is a risk of material damage. Discharged batteries should only ever be replaced with batteries of the same voltage, same size and same specification.

Not to be reproduced, wholly or in part, without written permission from BMW AG, Munich.

Order No.: 01 40 9 831 840

12.2020

Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.