F 850 GS (2020) - Motorcycle BMW - Free user manual and instructions

Product Type	Adventure Motorcycle
Brand	BMW
Model	F 850 GS (2020)
Engine Type	Liquid-cooled, 4-stroke, parallel-twin
Displacement	853 cc
Bore x Stroke	84 mm x 77 mm
Compression Ratio	12.7:1
Max Power	95 hp (70 kW) at 8,250 rpm
Max Torque	92 Nm at 6,250 rpm
Fuel Supply	Electronic injection, BMS-E
Fuel Capacity	15 L (4.0 US gal)
Transmission	6-speed constant mesh
Final Drive	Chain (O-ring)
Frame	Steel bridge frame, load-bearing engine
Front Suspension	43 mm USD telescopic fork
Rear Suspension	Cast aluminum dual swing arm, central spring strut
Front Brakes	Dual 305 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, 2-piston caliper
ABS	BMW Motorrad ABS (optional cornering ABS)
Dimensions (L x W x H)	2,305 mm x 922 mm x 1,350 mm
Wheelbase	1,593 mm
Seat Height	860 mm (standard)
Kerb Weight (fully fueled)	229 kg
Max Payload	226 kg (including rider and luggage)

Frequently Asked Questions - F 850 GS (2020) BMW

What type of oil should I use for the BMW F 850 GS?

BMW recommends a fully synthetic 5W-40 or 10W-40 engine oil that meets BMW Longlife-01 or API SN standard. Use only high-quality oil to ensure engine longevity.

How often should I change the oil and filter?

Oil and filter changes are recommended every 10,000 km (6,200 miles) or once a year, whichever comes first. Refer to the service schedule in your manual.

What is the correct tire pressure for the F 850 GS?

Recommended tire pressures: front 2.5 bar (36 psi), rear 2.9 bar (42 psi) for solo riding. Adjust to 2.5/3.0 bar (36/43 psi) with passenger and luggage. Always check when cold.

Can I use regular gasoline (95 RON) in this motorcycle?

The F 850 GS is designed for unleaded premium gasoline with a minimum octane rating of 95 RON (91 AKI). Using lower octane can cause engine knocking and damage.

How do I adjust the chain tension?

Chain slack should be 30-40 mm (1.2-1.6 in) when measured at the midpoint with the bike on a paddock stand. Loosen the axle nut, adjust tensioners equally, and retorque axle to 105 Nm.

What riding modes are available?

Standard modes include Rain, Road, and off-road ‘Enduro’ and ‘Enduro Pro’ (optional). Each adjusts throttle response, ABS, ASC (traction control), and engine power delivery.

Is the F 850 GS suitable for tall riders?

Yes, with a standard seat height of 860 mm, it accommodates riders from 1.70 m to 1.85 m. Lower and higher seat options are available from BMW accessories.

How do I reset the service light?

Service light reset requires an OBD tool or diagnostic interface. It’s recommended to have it done by a BMW dealer or with an appropriate aftermarket scanner.

What is the lifespan of the chain and sprockets?

With proper lubrication and adjustment, the chain and sprockets typically last 20,000-30,000 km (12,500-18,500 miles). Replace as a set when worn.

Does the F 850 GS have a fuel gauge?

Yes, it features a digital instrument cluster with a fuel level indicator. When the low fuel warning light comes on, approximately 3.5 L remain.

USER MANUAL F 850 GS (2020) BMW

Side profile of a black and red BMW motor bike (no visible text or symbols)

Údaje o vozidlu

Model

Dialog Check-Control

Remote key not in range. Not possi- to switch on igni- n again.

Možná příčina:

Remote key battery at 50%. No functio-impairment.

Remote key battery weak. Limited cen- locking function. nge battery.

Možná příčina:

b Vehicle voltage low. Switch off unnecessary consumers.

Vehicle voltage critical! Consumers

were switched off. Check battery condition.

VAROVÁNÍ

Front right turn indicator faulty!

Vehicle voltage critical! Battery is

Low-beam headlight faulty!

not being charged. Check battery status.

Front side light faulty!

38 UKAZATELE

Daytime riding light faulty!

Tail light faulty!

Brake light faulty!

Rear left turn indi- cator faulty!, popř.

Rear right turn indicator faulty!

Number plate light faulty!

- Have it checked by a specialist workshop.

VAROVÁNÍ

capacity weak. No strictions. Make an ointment at a specia- t workshop.

Alarm system battery empty. No indepen-

dent alarm. Make an ap- pointment at a specia- list workshop.

Coolant temperature too high! Check coolant level. Continue driving in part. load to cool down.

POZOR

Engine! Have it checked by a specia-

list workshop.

Možná příčina:

No communicationwith engine control. Multiple sys. affected. Ride carefully to the next specialist workshop.

Fault in the engine control. Onward journey possible Ride carefully to next speci- alist workshop.

VAROVÁNÍ

Serious fault in the engine control! Riding at mod. speed pos. Damage possible. Have checked by workshop.

VAROVÁNÍ

Tyre pressure does not match setpoint

Check tyre pressure.

Tyre pressure does not match setpoint to immediately! Check the pressure.

Tyre press. control. Loss of pres- e. Stop immediately! ck tyre pressure.

VAROVÁNÍ

Emergency call failure. Make an ap-RDC sensor battery weak. Function limipointment at a specialist workshop.

ted. Have it checked by specialist workshop.

aMožná příčina:

Side stand monito- ring faulty. Onward journey possible. Engine stop. when stationary! Have checked by workshop.

Vadný snímač pádu

Drop sensor faulty. Have it checked by a specialist workshop.

Možná příčina:

Limited ABS availability! Onward journey possible. Ride carefully to next specialist workshop.

Možná příčina:

ABS failure! Onward journey possible.

Ride carefully to next specialist workshop.

Možná příčina:

possible. Ride carefully to next specialist workshop.

Možná příčina:

Traction control de-activated.

Možná příčina:

Traction control limited! Onward jour-possible. Ride care-y to next specialist kshop.

48 UKAZATELE

Možná příčina:

Traction control failure! Onward

journey possible. Ride carefully to next specialist workshop.

Možná příčina:

Spring strut adjustment faulty! Onward journey possible. Ride carefully to next specialist workshop.

Možná příčina:

Service due! Have service performed by a specialist workshop.

Možná příčina:

tService overdue! Have service performed by a specialist workshop.

Možná příčina:

Close-up of a mechanical component with a circular dial and numbered label (1), no readable text or symbols beyond the number.

Close-up of a mechanical component with a circular dial and labeled knob (no readable text or symbols beyond basic markings)

Close-up of a mechanical component with a circular dial and adjustment knob (no readable text or symbols)

Remote key battery weak. Limited central locking function. Change battery.

• Vyměňte baterii.

Close-up of a mechanical brake switch mechanism with no visible text or symbols

Close-up of a mechanical hand gripping a brake caliper with control buttons and lever (no text or symbols visible)

Close-up of a mechanical device with control buttons and a labeled section (1), no readable text or symbols beyond the label.

Close-up of a hand holding a wristwatch with control buttons and a numbered indicator (1), no readable text or symbols present.

Close-up of a mechanical control switch mechanism with no visible text or symbols

Close-up of a mechanical device with control buttons and a numbered label (1), no readable text or symbols beyond the number.

Close-up of a mechanical control switch mechanism with labeled component (1), no visible text or symbols beyond the number marker.

Close-up of a mechanical device with control buttons and lever mechanism (no visible text or symbols)

Close-up of a mechanical device with control buttons and lever mechanism (no visible text or symbols)

Close-up of a mechanical hand gripping a brake switch with control buttons (no visible text or symbols)

Close-up of a mechanical device handle with control buttons and a numbered label (1), no readable text or symbols beyond the number.

Illustration of a camera lens with a numbered label pointing to the lens (no text or symbols on the device itself)

Illustration of a camera lens with a numbered label (1) pointing to the lens area (no text or symbols on the lens itself)

Illustration of a camera lens with labeled component (1), no text or symbols present

Výstražný signál

3D illustration of a device with a labeled button (1) and circular arrow, no text or symbols present.

Close-up of a mechanical component with a black arrow indicating direction and number 1 (no text or symbols on the main subject)

Close-up of a mechanical component with directional arrows indicating movement or assembly (no text or symbols visible)

Close-up of a mechanical lever mechanism with directional arrows indicating motion (no text or symbols)

- Vyvolejte menu Settings, System settings, Date and time.

Close-up of a mechanical component with directional arrows indicating movement or force (no text or symbols present)

-At current location

-At destination

-Along the route

• Vyberte a potvrd'te Start route guidance.

•Vyvolejte menu Navigation, Active route guidance.

•Vyberte a potvrd'te End route guidance.

- Vyberte a potvrd'te Current instruction.

MÉDIA

Předpoklad

•Vyvolejte menu Media.

BMW Motorrad doporu- -Vyberte Playlists.

Close-up of a mechanical device with directional arrows indicating movement or force (no text or symbols visible)

Close-up of a black and white car wheel rim with a curved handle (no text or symbols)

Mechanical assembly diagram showing a shaft and housing with numbered components (no readable text or symbols)

VAROVÁNÍ

Close-up of a bicycle hand handle with labeled component (1), no visible text or symbols beyond the number and icon.

! VAROVÁNÍ

Mechanical assembly diagram showing a gear mechanism with no visible text or symbols

VAROVÁNÍ

Mechanical assembly diagram showing a component with numbered label (1) and circular symbol, no readable text or symbols present.

Abstract grayscale graphic with curved arrows and a numbered circle, no readable text or symbols

Close-up of a mechanical device with a labeled button (no readable text or symbols)

Mechanical assembly diagram showing a valve and gear mechanism (no text or symbols visible)

Close-up of a mechanical component with a metallic lever and a labeled 'max' button (no other text or symbols)

Close-up of a mechanical component with a circular dial and directional arrow, no visible text or symbols

Close-up of a mechanical component with a metallic top and circular opening, labeled 'max' in the corner (no other text or symbols)

Black-and-white photo of a motorcycle on a flatbed trailer, no visible text or symbols

POZOR

Close-up of mechanical components with no visible text or symbols

POZOR

Uskřípnutí součástí

Poškození součástí

Close-up of a mechanical assembly with visible gears and brackets (no text or symbols)

Mechanical component with cylindrical parts and a spring-like extension (no visible text or symbols)

Two white bicycle ladders with wheels, no text or symbols visible

Mechanical device with two wheels and a curved handle (no text or symbols visible)

Close-up of a BMW internal gear assembly with no visible text or symbols

Close-up of a BMW electric motor assembly with labeled parts (no readable text or symbols)

Close-up of a motorcycle wheel and disc assembly with a numbered component (1) and an arrow pointing to a specific part (no text or symbols present)

Mechanical valve or pump assembly diagram showing internal components and flow direction arrows (no text or labels)

Close-up of a bicycle wheel assembly with visible components and no text or symbols

Mechanical component diagram showing a lever and shaft assembly (no text or symbols)

Mechanical assembly diagram showing gears and shafts with a numbered component (1), no readable text or symbols present.

Close-up mechanical component with numbered label (1) pointing to a section, no readable text or symbols present.

Mechanical assembly diagram showing internal components and a numbered label (1), no readable text or symbols present.

Mechanical assembly diagram showing gear and shaft components (no text or symbols visible)

Mechanical assembly diagram showing gear and components with no visible text or symbols

Close-up mechanical assembly showing a pipe fitting and clamping mechanism (no visible text or symbols)

Close-up of a mechanical assembly with labeled component (5), no readable text or symbols beyond the number

Close-up of a mechanical assembly with a numbered label (5) pointing to a central component (no readable text or symbols beyond the number)

Mechanical assembly diagram showing a pipe fitting and mounting bracket (no text or symbols visible)

Mechanical assembly diagram showing a motor and gear assembly with no visible text or symbols

Close-up of mechanical components with numbered callouts (1 and 2), no readable text or symbols present.

Close-up of a mechanical assembly with gears and springs (no visible text or symbols)

Close-up of a bicycle wheel with chain links and gear mechanism (no visible text or symbols)

Mechanical assembly diagram showing gear and shaft components with no visible text or symbols

Mechanical assembly diagram showing a gear and motor components with no visible text or symbols

Close-up of a motorcycle's wheel and chain gear assembly (no visible text or symbols)

Mechanical assembly diagram showing a gear mechanism with no visible text or symbols

Mechanical assembly diagram showing a motor with labeled component 'A' (no text or symbols beyond label)

Close-up of mechanical components with numbered callouts (3 and 4) indicating parts of a device or assembly (no readable text beyond labels)

Close-up of a mechanical component with a numbered label (1) pointing to a section, no readable text or symbols present.

Black-and-white photo of a cluttered mechanical device with numbered callouts (4 and 5) pointing to components like a laptop and gear (no readable text or symbols)

Mechanical assembly diagram showing internal components with numbered callouts (4 and 1), no readable text or symbols present.

• Namontujte rám 4.

POZOR

Mechanical component with a numbered callout (6) pointing to a lever mechanism (no text or symbols on the component itself)

Close-up of mechanical components with a numbered label (1) pointing to a component, no readable text or symbols present.

Mechanical assembly diagram showing internal components with a numbered label (1) and an arrow indicating direction, no readable text or symbols present.

POZOR

Interior view of a vehicle's dashboard compartment showing internal components and a numbered dial (1), with no visible text or symbols.

Close-up of a mechanical component with a numbered label (1) pointing to a feature, no readable text or symbols present.

POZOR

POZOR

Close-up of a mechanical device with a numbered label (1) pointing to a component, no visible text or symbols beyond the number.

Open mechanical toolbox with a numbered label (1) on one side, no visible text or symbols beyond the number.

POZOR

Mechanical assembly diagram showing a component being inserted into a housing (no text or symbols visible)

Close-up of a mechanical device showing internal components and a curved arrow indicating rotation (no text or symbols present)

POZOR

OŠETŘUJÍCÍ PROSTŘEDKY

MYTÍ MOTOCYKLU

ELEKTRICKÁ INSTALACE 222

ROZMĚRY 223

HMOTNOSTI 224

JÍZDNÍ VÝKONY

224

212 TECHNICKÉ ÚDAJE

TABULKA ZÁVAD

Motor nestartuje:

Příčina Odstranění

ELEKTRICKÁ INSTALACE

Declaration of Conformity

Radio equipment electronic immobiliser (EWS)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band: 134 kHz (Transponder: TMS37145 / TypeDST80, TMS3705 Transponder Base Station IC) Output Power: 50 dBμV/m

Manufacturer and Address

Hereby, BECOM Electronics GmbH declares that the radio equipment type EWS4 is in compliance with Directive 2014/53/EU53 The full text of the EU declaration of conformity is available at the following internet address: http://www.becom.at/de/download/

Greece

Hereby, BECOM Electronics GmbH declares that the radio equipment type EWS4 is in compliance with Directive 2014/53/EU53.

The full text of the EU declaration of conformity is available at the following internet address: http://www.becom.at/de/download/

Italy

Ring aerial in the ignition switch

Close-up of a black industrial control knob with no visible text or symbols

To verify the authorization of the ignition key, the electronic immobilizer exchanges information with the ignition key via the ring aerial.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly

approved by the party responsible for compliance could void the user's authority to operate the equipment.

Close-up of a black industrial control knob with adjustment knobs and a circular dial (no text or symbols visible)

Declaration of Conformity

Radio equipment Keyless Ride

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency band: 434,42 MHz Maximum Transmission Power: 10 mW

Manufacturer and Address

Manufacturer: Huf Hülsbeck & Fürst GmbH & Co. KG Adress: Steeger Str. 17, 42551 Velbert, Germany

Bülgarski

Hereby, Huf Hülsbeck & Fürst GmbH & Co. KG declares that the radio equipment type HUF5750 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.huf-group.com/eudoc

Español

3D rendering of a black and silver remote control device with a circular dial and control panel (no text or symbols visible)

USA, Canada:

Product name: BMW Keyless Ride ID

Device FCC ID: YGOHUF5750

IC: 4008C-HUF5750

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Canada:

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

USA:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Argentina:

Declaration Of Conformity

We declare under our responsibility that the product

BMW Keyless Ride ID Device (Model: HUF5750)

camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards:

1. Health and safety requirements contained in article 3 (1) a)

- EN 60950-1:2006+A11:2009+A1:2010+A12:2011; Information technology equipment-Safety

1. Protection requirements with respect to electromagnetic compatibility article 3 (1) b)

- EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements

- EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short range devices (SRD) operating on frequencies between 9 kHz and 40 GHz

1. Means of the efficient use of the radio frequency spectrum article 3 (2)

- EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW;

Part 1: Technical characteristics and test methods.

Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TIE directive

The product is labeled with the CE marking:

CE

Velbert, October 15 ^th , 2013

Benjamin A. Müller

Product Development Systems

Car Access and Immobilization -

Steeger Straße 17, D-42551

Velbert

Declaration of Conformity

Radio equipment tyre pressure control (RDC)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band: 433.895 - 433.945 MHz Output Power: <10 mW e.r.p.

Manufacturer and Address

Manufacturer: Schrader Electronics Ltd. Adress: Technology Park, Antrim, N. Ireland BT41 1QS, United Kingdom

Austria

Hereby, Schrader Electronics Ltd. declares that the radio equipment type BC5A4 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.tpmseuroshop.com/

documents/

declaration_conformities

Greece

Hereby, Schrader Electronics Ltd. declares that the radio equipment type BC5A4 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.tpmseuroshop.com/documents/declaration_conformities

Italy

http://www.tpmseuroshop.com/documents/declaration_conformities

Malta

B'dan, Schrader Electronics Ltd., niddikjara li dan it-tip ta' taghmir tar-radju BC5A4 huwa konformi mad-Direttiva 2014/53/UE. Ittest kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li gej: http://www.tpmseuroshop.com/documents/declaration_conformities

Netherlands

Certification Tire Pressure Control (TPC)

FCC ID: MRXBC54MA4 IC: 2546A-BC54MA4

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

FCC ID: MRXBC5A4 IC: 2546A-BC5A4

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

Declaration of Conformity

Radio equipment TFT instrument cluster

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

BT operating frq. Range: 2402 – 2480 MHz BT version: 4.2 (no BTLE) BT output power: < 4 dBm WLAN operating frq. Range: 2412 – 2462 MHz WLAN standards: IEEE 802.11 b/g/n WLAN output power: < 20 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Austria

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type ICC6.5in is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Greece

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type ICC6.5in is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Italy

Declaration of Conformity

Radio equipment TFT instrument cluster

For all Countries without EU

Technical information

BT operating frq. Range: 2402 – 2480 MHz BT version: 4.2 (no BTLE) BT output power: < 4 dBm WLAN operating frq. Range:: 2412 – 2462 MHz WLAN standards: IEEE 802.11 b/g/n WLAN output power: < 20 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Turkey

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

(This telecommunication equipments is in compliance with NTC requirements)

United States (USA)

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Declaration of Conformity

Radio equipment intelligent emergency call

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Antenna internal: Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 22 dBm Not acessable by user: Frequency Band: 1710 MHz - 1785 MHz Radiated Power [TRP]: < 26 dBm Frequency Band: 1920 MHz - 1980 MHz Radiated Power [TRP]: < 22 dBm Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 23 dBm

Manufacturer and Address

Manufacturer: Robert Bosch Car Multimedia GmbH Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY

Austria

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type TPM E-CALL EU is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Greece

Hereby, Robert Bosch Car Multimedia GmbH declares that the radio equipment type TPM E-CALL EU is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://cert.bosch-carmultimedia.net

Italy

Declaration of Conformity

Radio equipment anti-theft alarm (DWA)

Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after 12.06.2016 and during transition period

Technical information

Frequency Band:

433.05-434.79 MHz

Output Power: 10 mW e.r.p.

Manufacturer and Address

Manufacturer: Meta System S.p.A.

Adress: Via Galimberti 5 42124

Reggio Emilia - Italy

Austria

Hereby, Meta System S.p.A. declares that the radio equipment type TXBMWMR is in compliance with Directive 2014/53/8 The full text of the EU declaration of conformity is available at the following internet address: https://docs.metasystem.it/

Greece

Hereby, Meta System S.p.A. declares that the radio equipment type TXBMWMR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://docs.metasystem.it/

Italy

Please note the following in addition to the information provided in the Owner's Handbook.

WARNING

The battery inside the vehicle key is a button cell. Batteries or button cells can be swallowed, causing serious or even fatal injuries within two hours, e.g. due to internal burns or cauterisations. There is a danger of injury or danger to life. Keep vehicle keys and batteries out of the reach of children. Seek medical assistance immediately if you suspect that a battery or button cell has been swallowed or has got into a part of the body.

NOTE

Using unsuitable batteries in a vehicle key can damage the vehicle key. There is a risk of material damage. Discharged batteries should only ever be replaced with batteries of the same voltage, same size and same specification.

Not to be reproduced, wholly or in part, without written permission from BMW AG, Munich.

Order No.: 01 40 9 831 840

12.2020

Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.