METABO KPA 18 LTX 600 - Glue gun

KPA 18 LTX 600 - Glue gun METABO - Free user manual and instructions

Find the device manual for free KPA 18 LTX 600 METABO in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product type Cordless glue gun
Brand Metabo
Model KPA 18 LTX 600
Nominal voltage 18 V
Battery type Li-Ion (Cordless Alliance System)
Recommended battery capacity ≥ 2.0 Ah
Gluing temperature 200 °C
Heating time Approx. 3 minutes
Glue stick diameter 11 mm
Weight (without battery) 0.45 kg
Dimensions (L x W x H) 200 x 50 x 150 mm
Power supply 18 V battery (not included)
Main functions Rapid heating, LED temperature indicator, automatic shut-off after inactivity
Maintenance Clean glue residue with a dry cloth, do not immerse
Safety Overheat protection, double insulation (class II)
Spare parts Replacement nozzle, stick holder
General information Intended use for bonding various materials, indoor use

Frequently Asked Questions - KPA 18 LTX 600 METABO

How to charge the battery with the Metabo charger?
Insert the battery fully into the sliding compartment (2) until it stops. The control light (3) flashes during charging. Charging stops automatically and the light remains solid.
What does the permanently lit warning light (4) mean?
The battery is not charged because its temperature is too high or too low. If the temperature is between 0°C and 50°C, the charging process starts automatically.
Can I use a NiCd battery in this charger?
Yes, some chargers like the ASC 55 and ASC 55 SE are suitable for charging NiCd batteries (12 V, 1.7 Ah, 10 cells). Check the specifications of your charger.
How do I know if the battery is fully charged?
The control light (3) stays solid when the battery is fully charged. The charger then automatically switches to maintenance mode.
What should I do if the warning light (4) flashes?
This indicates a defective battery or incorrect insertion. Immediately remove the battery from the charger and check its condition. Never use defective batteries.
Can I leave the battery in the charger after charging?
Yes, the charger switches to maintenance mode. The battery can remain in the charger and will be ready for use at any time.
Which charger should I use for a Metabo 18 V battery?
Compatible chargers include ASC 145, ASC 55, SC 60 Plus, etc. Refer to the technical specifications table for the charging current and duration suitable for your battery.
What is the typical charging time for an 18 V / 4.0 Ah battery?
With an ASC 145 charger, the charging current is about 6.5 A and the charging time is approximately 37 minutes (according to the technical table).
How should I maintain the charger?
Protect the charger from moisture and keep it out of reach of children. Clean the ventilation slots and ensure they are not obstructed. Never insert metal objects into the openings.
Where can I find spare parts for the charger?
For any repairs, contact your Metabo representative. Addresses are available at www.metabo.com. If the power cord is damaged, have it replaced by the manufacturer.

User questions about KPA 18 LTX 600 METABO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Glue gun in PDF format for free! Find your manual KPA 18 LTX 600 - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KPA 18 LTX 600 by METABO.

USER MANUAL KPA 18 LTX 600 METABO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : METABO

Model : KPA 18 LTX 600

Category : Glue gun