METABO KPA 12 400 - Glue gun

KPA 12 400 - Glue gun METABO - Free user manual and instructions

Find the device manual for free KPA 12 400 METABO in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Brand Metabo
Model KPA 12 400
Product Type Cordless Glue Gun
Power Source 12 V lithium-ion battery (Metabo / CAS compatible)
Glue Temperature 160 - 200 °C (adjustable)
Heat-up Time Approx. 2 minutes
Glue Flow Rate 20 g/min
Glue Stick Diameter 11 mm
Tank Capacity 1 standard stick (approx. 20 cm)
Weight (without battery) 0.45 kg
Dimensions (L x W x H) 200 x 50 x 120 mm
LED Indicator Yes (heating / ready / low battery)
Safety Automatic shut-off after 5 minutes of inactivity; overheat protection
Wall Mount Yes (integrated for storage)
Maintenance Clean the nozzle after cooling with a dry cloth; do not use solvents
Available Spare Parts Replacement nozzles (fine, wide, etc.); battery and charger sold separately
Repairability Repairs by Metabo customer service or a qualified professional
Warranty 2 years (subject to terms and conditions)

Frequently Asked Questions - KPA 12 400 METABO

How to turn the Metabo KPA 12 400 glue gun on and off?
Press the on/off switch on the handle. The LED indicator lights up to signal heating. To turn off, press again.
What type of battery should be used with the KPA 12 400?
Use a Metabo or CAS 12 V lithium-ion battery with a capacity between 1.3 and 10 Ah. Never use non-rechargeable batteries.
How long does it take for the glue to be ready?
The heat-up time is about 2 minutes. The LED indicator changes from red to green when the working temperature is reached.
What glue sticks should be used?
Use hot melt glue sticks with a diameter of 11 mm, standard or high performance. Avoid sticks of different diameters.
What to do if glue runs continuously?
Check that the nozzle is tightly attached and the stick is not blocked. If the problem persists, reduce the temperature if adjustable, or clean the nozzle after cooling.
How to clean the glue gun?
Let the device cool down, then wipe the nozzle and housing with a dry cloth. Never use water or solvents. For stubborn residues, heat slightly and remove gently.
The LED light is blinking, what does it mean?
Rapid blinking indicates low battery or temperature error. Consult the manual for exact codes. If it persists, remove and reinsert the battery.
Can I use the gun continuously?
Yes, but take breaks to avoid overheating. The automatic shut-off after 5 minutes of inactivity protects the device and saves battery.
Where to find spare parts or accessories?
Replacement nozzles, batteries, and chargers are available from authorized Metabo dealers or at www.metabo.com. Use only original parts.
What to do if the battery does not charge?
Use a suitable Metabo charger (e.g., ASC 55). Ensure the battery is inserted properly and contacts are clean. If the problem persists, the battery may be defective.

User questions about KPA 12 400 METABO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Glue gun in PDF format for free! Find your manual KPA 12 400 - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KPA 12 400 by METABO.

USER MANUAL KPA 12 400 METABO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : METABO

Model : KPA 12 400

Category : Glue gun