METABO KPA 12 600 - Glue gun

KPA 12 600 - Glue gun METABO - Free user manual and instructions

Find the device manual for free KPA 12 600 METABO in PDF.

📄 76 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice METABO KPA 12 600 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Cordless glue gun
Brand Metabo
Model KPA 12 600
Rated voltage 12 V (Li-Ion battery)
Operating temperature Approx. 160 °C (low temperature)
Glue stick diameter 11 mm
Heating time Approx. 60 seconds
Glue flow rate Variable depending on trigger pressure
Battery life per charge Variable depending on battery (e.g., 2 Ah: approx. 30 min continuous)
Weight (without battery) Approx. 0.5 kg
Dimensions (L x W x H) 200 x 150 x 70 mm
Housing material Reinforced plastic
Compatible battery type Metabo 12 V CAS (Cordless Alliance System)
Status indicator Heating and battery LED
Safety Automatic shutdown after inactivity, overheating protection
Maintenance and cleaning Clean the nozzle after use with a dry cloth; do not immerse in water
Repairability Spare parts available via Metabo customer service; repair by professional recommended
Warranty 2 years (according to Metabo conditions)
Package contents Glue gun, 3 glue sticks, user manual

Frequently Asked Questions - KPA 12 600 METABO

Which battery to use with the Metabo KPA 12 600?
The glue gun works with Metabo 12V CAS batteries (Cordless Alliance System). Use a 12V Li-Ion battery, for example the 2.0 Ah or 4.0 Ah models.
What type of glue sticks to use?
Use standard 11 mm diameter glue sticks, preferably low temperature (approx. 160 °C) for optimal use with this gun.
How long does it take for the gun to heat up?
Heating time is approximately 60 seconds. An LED indicates when working temperature is reached.
Can the gun be left on unattended?
No, it is not recommended to leave the gun on unattended. If not in use, turn it off and remove the battery. Some models have an automatic shutdown after inactivity.
How to clean the gun nozzle?
Wait for the gun to cool down, then wipe the nozzle with a dry cloth. Never use water or solvents, and do not immerse the device in water.
What to do if glue does not come out?
Check that the battery is charged and the gun has reached temperature. Make sure the glue stick is properly inserted and there is no clog in the nozzle. If necessary, clean the nozzle with a suitable tool.
Can the gun be used for precision work?
Yes, thanks to its progressive trigger and fine nozzle, the KPA 12 600 allows precise dosing of glue for delicate tasks such as DIY, repair, or modeling.
What is the battery life?
Battery life depends on battery capacity. With a 2.0 Ah battery, you can use the gun continuously for about 30 minutes. A 4.0 Ah battery doubles this time.
Where to find spare parts?
Spare parts (nozzle, feeding mechanism, etc.) are available from Metabo customer service or the official website. For repairs, contact an authorized professional.
Is the gun warranted?
Yes, the Metabo KPA 12 600 comes with a 2-year warranty against manufacturing defects. Keep the invoice and follow the usage conditions to claim the warranty.

User questions about KPA 12 600 METABO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Glue gun in PDF format for free! Find your manual KPA 12 600 - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KPA 12 600 by METABO.

USER MANUAL KPA 12 600 METABO

natural_image Two Metabo brand thermocouple units (no visible text or symbols on the devices themselves)

METABO KPA 12 600 - 1

Original instructions

1. Declaration of Conformity

We, being solely responsible: Hereby declare that these chargers, identified by type and serial number *1), meet the requirements of all relevant directives *2) and standards *3). Technical documents for *4) - see page 3.

For UK only:

UK We as manufacturer and authorized person to CA compile the technical file, see *4) on page 3, hereby declare under sole responsibility that these chargers, identified by type and serial number *1) on page 3, fulfill all relevant provisions of following UK Regulations S.I. 2016/1091, S.I. 2016/1101, S.I. 2012/3032 and Designated Standards EN 60335-1, EN 60335-2-29, EN IEC 63000:2018.

2. Specified Conditions of Use

Chargers are only suitable for charging Metabo and CAS (Cordless Alliance System) battery packs.

This device is not designed for use by persons (including children) with physical, sensory or mental disabilities, or with insufficient experience and/or knowledge, unless they are supervised by a person responsible for their safety, or have received instructions on how to use the device by this person.

ASC 30-36 is suitable for charging Li-ion battery packs (14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells).

ASC 55, ASC 55 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 145, ASC 145 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC ultra is suitable for charging Li-ion battery packs (corresponding to the print on the tool, either 14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells, or 12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

SC 60 Plus is suitable for charging Li-ion battery packs (14.4 V - 18 V, 1.3 Ah - 10 Ah, 4-10 cells).

SC 30 is suitable for charging Li-ion battery packs (12 V - 18 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 55, ASC 55 SE is suited for charging NiCd battery packs (12 V, 1.7 Ah, 10 cells).

METABO KPA 12 600 - Specified Conditions of Use - 1

Never attempt to charge batteries that are not rechargeable. Danger of explosion!

The user bears sole responsibility for any damage caused by inappropriate use.

Generally accepted accident-prevention regulations and accompanying safety instructions should be observed.

3. General Safety Information

METABO KPA 12 600 - General Safety Information - 1

WARNING – Read the operating instructions to reduce the risk of injury.

METABO KPA 12 600 - General Safety Information - 2

WARNING Read all safety warnings and instructions.

Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for future reference.

METABO KPA 12 600 - Keep all safety instructions and information for future reference. - 1

Before using the charger, carefully read through and familiarise yourself with all closed safety information e Operating Instructions.

Keep all enclosed documentation for future reference, and pass on your charger only together with this documentation.

4. Special Safety Instructions

METABO KPA 12 600 - Special Safety Instructions - 1

For your own protection and for the protection of your power tool, pay attention to its of the text that are marked is symbol!

METABO KPA 12 600 - Special Safety Instructions - 2

Danger - electrical voltage!

METABO KPA 12 600 - Special Safety Instructions - 3

A slightly acidic, flammable fluid may leak from defective Li-ion battery packs!

If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately!

ENGLISHen

Do not recharge a fully charged battery pack!

METABO KPA 12 600 - ENGLISHen - 1

Only for use in indoor rooms.

METABO KPA 12 600 - ENGLISHen - 2

Protect the charger from moisture.

Never allow children to use the device.

Children should be supervised to ensure that they do not play with the tool.

Keep children away from the battery charger and the working area!

Keep your battery charger out of reach of children!

Pull out the mains plug immediately if the battery charger starts to smoke or flames emerge!

Do not insert objects into the ventilation slots on the battery charger – there is a danger of electric shocks and short circuits!

Do not use faulty battery packs. In areas with high metal dust exposure do not charge any battery packs with AIR COOLED chargers.

5. Overview

See page 2. The illustrations are regarded as exemplary for all devices.

1 Battery pack (not in scope of delivery)
2 Sliding seat
3 Operation display
4 Warning display

6. Initial Operation

METABO KPA 12 600 - Initial Operation - 1

Before commissioning, check that the rated mains voltage and mains frequency stated on the type plate match your power supply.

Devices like these that generate direct current can influence simple earth leakage protection devices. Use a type F or better, with a release current of max. 30 mA.

METABO KPA 12 600 - Initial Operation - 2

Before commissioning the charger, ensure that the air slots are free. Minimum distance to other objects is 5 cm!

6.1 Self-test

Plug in.

The warning display (4) and the operating indicator (3) light up one after the other for approx. 1 second and the installed fan runs for approx. 5 seconds.

7. Use

7.1 Charging battery pack

Push the battery pack completely to the stop on the sliding seat (2).

METABO KPA 12 600 - Charging battery pack - 1

The operating indicator (3) flashes.

Note: To have the charge level displayed on Li-ion battery packs, first take the battery pack out of the charger and then press the button on the battery pack.

7.2 Conservation charge

Once the charging process has finished, the battery charger automatically switches to conservation mode.

The battery pack can remain in the battery charger and is therefore always ready for use.

METABO KPA 12 600 - Conservation charge - 1

The operating display (3) lights up continuously.

8. Faults

8.1 Warning display (4) lights up continuously

METABO KPA 12 600 - Warning display (4) lights up continuously - 1

Battery pack is not charged. Excessive/insufficient temperature. When the temperature of the battery pack is between 0 °C and 50 °C , the charging process begins automatically.

8.2 Warning display (4) flashes

METABO KPA 12 600 - Warning display (4) flashes - 1

  • Battery pack is defective. Remove the battery pack immediately from the charger.
  • The battery pack was not pushed correctly onto the sliding seat (2). See chapter 7.1.

9. Repairs

Repairs to the charger must only be carried out by qualified electricians.

If the mains connection cable of this device is damaged, it must be replaced by the manufacturer

or the Customer Service department of the manufacturer or a similarly qualified person to prevent endangering personnel and property.

If you have Metabo charges that require repairs, please contact your Metabo service centre. See www.metabo.com for addresses.

10. Environmental Protection

Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.

METABO KPA 12 600 - Environmental Protection - 1

Only for EU countries: never dispose of power tools in your household waste! According to European Directive 2012/19/EU

on Waste from Electric and Electronic Equipment and implementation in national law, used power tools must be collected separately and recycled in an environmentally-friendly manner.

11. Technical Specifications

See page 3.

U = voltage ranges of the battery packs
C = battery pack capacity
l_C = charging current
t = charging time

^1) Depending on the residual capacity and the temperature of the battery pack, real charging times may deviate from the specifications.

Recommended ambient temperature when charging: 0 °C to 40 °C

Changes due to technological progress reserved.

Device of protection class II

\~ AC Power

FRANÇAISfr

Notice originale

C = accupack-capaciteit

I_C = laadstroom

t = laadtijd

Uju wtuwlyh wupftpp, npn6f qt6tpwg6m1d t6 hwnwnwnm6 hwnw6f, lwpnn t6 mqnltL yhi6ptpt6ghwL mwqwhnl1s ufswnnty5kph dpu: YhpwnlF wkwnlp, lquw wnwljlwqncl6p 30 dJU, wfswnndwl hwnwlfnl wejwnwnn daqtkp:

METABO KPA 12 600 - Notice originale - 1

^1 npdwnphnufgh wwng hwnqultf, np onwnphnufng mfgftp# pgmfumd st6: Nmhqnukl wnfu[mq6 5 nd hlwni]npnupjni6 wjl wnwnphwukph ghwundwdp:

6.1 Ummiqnli

hynngwlq shmgfkl hnuw6f h ympnwlqhi:

UqqnW6cmW6Jh6 (4) h wcjwnwnGfH h6nhlhwwnnpGtph lmjutpp (3) ymnjnu6 t6 hwgnpnpwpw dwnwnlpwnwtu 1 yph. empuftmuh, gtpumppfjmd hnlmgfdh hndwlmpqq mcjwnmmuf k dum. 5 yph. empuftmuh:

7. Чршннід

C = Uwpunlqngh hqnpncpjnufp

IC = lhglw|npduwhnuwlf

t = 1,hgfu|npduw|duufulw|

1) qubqud hghduwupuuhg le yapuwumfuuhq wujuwukphg hghwunpufu hpulwui duwuwuhp lwpqn k wnppptpkl fclud duwuwuhwhwniuwditphg:

Ighfuwapufu duwufuw ouunfuw ykpudwnuhfu^ hg uhyu 40 ^:

Bcpwqk T ynhnfowg wkjgghwqg pwptlmufw6 Guwwwnql:

□ II ηωυρ υωσωωω6m pγm6

\~ Φnμnμmμg hnuugf

№ ЕАЭС RU C-DE.ГБ09.B.00131/20, qnpδnul t, uhωδ 10.02.2020 άh624 09.02.2025 pp., mpjbl t, «'Ukqwllhuftwjuw έfwnlρωnhqu» UΩC' wpnnwnpwufh hw|wwnnwwqpwuf δwpd6h hqn6hg, hwugl (hpwnlwpwfuwr l qnpδnflklnpjw6) ' 115280, θnclwwnnw, fwunuf U'nuljlu, φnngg Ιθhghuhwjuw U1pnnnu, ct6f 19, 2-pn hwph, ut6jmw6tp ' 21w8, 21w9, 21w10, 21w11: Ztnwnpu ' +7 (495) 722-61-68; ηL. φnwnuh hwugt' info@n-exp.ru: Zwi|wwnnwwqpwuf ίhwjwqhp No POCC RU.0001.11ГБ09 wn 09.09.2014 p.:

Zwduuununluwufprjwh hwnunupwquhp ' No EA3C N RU Д-DE.ГБ09.B.00348/20, qnpdnif k uluwd 04.03.2020 üh6h 26.02.2025 pp., qpugqltl k «Ükqullhuhwjw fwntpwnhqw» UNC' wpmwnpw6f hwnwnwnqpw6 dmp6h hnp6h, hmugt (hpwnlpw6mhw6 h qnpdnftm pwr6h)' 115280, fncuunnuw6, fuqw f Unaljlu, qhnng lLghfuhwjw Ulnpnnw, ct6f 19, 2-pn hwpl, utgjwl6tp ' 21w8, 21w9, 21w10, 21w11: Zbwnlonn' +7 (495) 722-61-68; lL. qwnuh hmugt' info@n-exp.ru: Zwlnwnwnqpw6 g lqmjwqhp No POCC RU.0001.11ГБ09 mm 09.09.2014 p.:

Upumnprufng kphhp' Qfghwnwnfg, qjkwngm Upumnprunq "Metabowerke GmbH", Utkwnpnwnlbjk 1, D-72622 Ujnpuhfiqfg, qkpufmfgm Ukpufmdnq fncnuunnwnfgmud "Utkwnpn bilpuulm" UfC Pncnuunnwug, 127273, Unuqlqu Φ. fKpnqnqnlwju wltw, umt6 5 a, chg.-6 7, qpwnutgjwlq 106 htn.' +7 495 980 78 41

Upwnnpudw wduwpplp gcalmd k Lhgfwlpudw uwpfh qpm Tnpdft h dwnwnmpjw6 dmuhtpw 7 uwpfh k: hnphmprn sh wpfnd wnuhfg hwiofwqm hiuniqdwh oqwnqnptk l qnpdftp wpwnnpudw wduwpllg uhumd '5 mmph cmpnfdmh wjh wpnhntwnmqlaplng hlaan (wpwnnpudw wduwphlp ndu whunwl h ipw):

METABO KPA 12 600 - Чршннід - 1

Shukhupjuli qianpnh huiup.

ZwduwwuunwulwGnlpjw6 hwylwwwnwqhp.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : METABO

Model : KPA 12 600

Category : Glue gun