SBE 650/13 - Screwdriver METABO - Free user manual and instructions
Find the device manual for free SBE 650/13 METABO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded impact drill/driver |
| Brand | Metabo |
| Model | SBE 650/13 |
| Power Supply | 230 V AC, 50 Hz |
| Rated Power | 650 W |
| Chuck Type | 13 mm keyed chuck |
| No-Load Speed | 0-3,000 rpm variable |
| Impact Rate | 0-48,000 bpm |
| Max. Drilling Capacity | Concrete 13 mm, Steel 10 mm, Wood 25 mm |
| Torque | 15 Nm soft / 50 Nm hard |
| Weight | 1.6 kg |
| Dimensions (L x W x H) | 33 x 22 x 8 cm |
| Cable Length | 2.5 m |
| Protection Class | Double insulated (class II) |
| Special Features | Right/left rotation, hammer drilling, variable speed |
| Maintenance | Clean ventilation slots regularly; inspect carbon brushes |
| Cleaning | Wipe with dry cloth; never use solvents |
| Safety | Always wear eye protection; unlock switch before connecting power |
| Spare Parts | Carbon brushes, chuck, power cord available from Metabo service |
| General Information | Designed for heavy-duty drilling and screwdriving applications |
Frequently Asked Questions - SBE 650/13 METABO
How do I change the drill bit on the Metabo SBE 650/13?
Unplug the tool first. Use the chuck key to loosen the jaws, insert the bit, and tighten firmly. Always ensure the bit is securely locked before starting.
Can I use the SBE 650/13 for driving screws?
Yes, it acts as a power screwdriver. Reduce the speed with the variable-speed trigger and use the reversing switch to change between tightening and removing screws.
What is the hammer action for and how do I activate it?
The hammer action is designed for drilling into masonry. Slide the selector ring to the hammer symbol, then drill with firm pressure. Do not use hammer mode on wood or metal.
Why does my drill overheat after extended use?
Overheating often occurs due to blocked ventilation slots or overloading the motor. Stop the tool, clean the air vents, and allow it to cool. Reduce pressure to avoid excessive strain.
How do I change the direction of rotation?
Use the reversing switch located above the trigger. Slide it to the right for clockwise rotation and left for anticlockwise. Make sure the tool is completely stopped before changing direction.
What maintenance does the SBE 650/13 require?
Regularly check the carbon brushes, replace them when worn. Keep the chuck and gears clean, and lubricate the gearbox according to the manual. Inspect the power cord for damage.
What safety equipment should I use with this drill?
Always wear safety goggles and hearing protection. Use a dust mask when drilling in concrete. Do not wear loose clothing that could get caught in the drill.
What is the maximum drilling capacity of this drill?
The maximum capacities are 13 mm in concrete, 10 mm in steel, and 25 mm in wood when using quality drill bits.
How can I replace the carbon brushes?
Remove the vent grills on the motor housing to access the carbon brush holders. Take out the worn brushes, insert new ones, and replace the grills. Use only original Metabo spare parts.
Is the tool double insulated?
Yes, the SBE 650/13 is double insulated and has a two-prong plug without earth. This provides extra safety against electric shock.
User questions about SBE 650/13 METABO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual SBE 650/13 - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBE 650/13 by METABO.
USER MANUAL SBE 650/13 METABO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : METABO
Model : SBE 650/13
Category : Screwdriver