Eurorack GO - Synthesizer BEHRINGER - Free user manual and instructions

USER MANUAL Eurorack GO BEHRINGER

Mobile 2 x 140 HP Eurorack Case with 3 Ampere Power Supply and 32 Keyed Power Connectors

2LUONACKCOQuckStarCuide3

EN Important Safety Instructions

Terminal'smared with this symbol carry electrical current of sufficient magnitude to constitute risk of electronic shock. the only high quality professional speaker cables with ^ 念 TS in tooth, lacking plug-per installed. All other installation or modification should be performed only by qualified personnel.

This symbol, whenever it appears, shows you to the presence of unbalanced dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, stotes you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution To reduce the risk of electric shock, do not remove the top cover (or the seat section). No user swivelable parts include. Refer servicing to qualified personnel.

Caution To reduce the risk of fire or electric shock, do not expose this appliance to radii and moisture. The apparatus shall not be exposed to dusting or splashing inks and no objects filled with liquids such as eggs, shall be placed on the apparatus.

Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any seeking other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.

2. Keep these instructions

3. Hedall warnings

4. Follow-al functions

5. Do not use this apparatus near water.

6. Clean only with dry soil

7. Demonstrate any ventilation openings installed in

aocnndwth the manuonr snsuc

1. Demonstrate that the following are not equal:

2. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one water than the other. A grounding-type plug has two blades and a third grounding plug. The wide blade or the thin plug are provided for your safety. If the provided plug does not connect to your outlet, consult an electronic repair or replacement of the oblique outlet.

3. Project the power coil from being waked on an unpainted partially at plug, convert resonance, and the point where they exit from the apparatus.

4. Use any attachment/accessories specified by the manufacturer.

1. On-the-job with the cart stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

Injury from lip-over

1. Unpicking this apparatus during lightning storms or when unsure for long periods of time.

2. Refer all seeking to qualified service personnel. Serving is required when the apparatus has been damaged in any way, such as power supply could be lost, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3. The apparatus shall be cremented to a KAWKS socket outlet with a protective sealing connection.

4. Where the MARS plug or an appliance outlet is used as the disconnect device, the disconnect device shall remain mostly opseite.

1. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the ACEI Directive (2012/19/10), and your national law. This product should be taken

In a coherent manner described for the recycling of waste electrical and electronic equipment (ITE), the marketing of the type of waste could have a positive impact on the market, as it would be more attractive than being in potentially hazardous substances that are generally associated with ITE. At the same time, your cooperation in the correct disposal of this product will contribute to

the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

1. Do not install in a confined space, such as a book case or semiquantum.

2. Do not use salted flume-sources, such as lighted candles on the apparatus.

3. Please keep the environmental aspects of battery disposal in line. Activities must be disposed of at a battery collection point.

4. Use this apparatus in tropical and/or moderate climates.

LEGAL DISCLAIMER

Music: Tribe accepts on liability for any loss which may be suffered by any person who relies otherwise wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Mids, Klink Teknik, Lab Groupen, Laie, Tanov, Turbosound, TC Electronic, TC Helkon, Behringer, Begaure, Astraatne and Coanda are trademarks or registered trademarks of Music. India Global Brand Ltd., © Music: tribe global brands Ltd., 2020 All rights reserved.

LIMITED WARRANTY

For the applicable warranty term and conditions, and additional information regarding Music Title's Limited Warranty, please see complete details online at www.musictable.com/

Zhangshan Urethane Electronics Limited
No.10 Wanniet Road, South China Garden Chinese House
Kleine Park, Banking Town, 128451, Zhangshan City, Guangdong Province, China

Instrucciones de

seguridad

La terminale menarcaion con this esbilico transportare corrente eletrode in umiputul sotuate con oam quin corteil un esque de escargue aie, Ulhe sele celules de alusu cemalizues de y alia called con comectones 15s d.63 m2do basometra prefjado, Cugulqla ceta insturacion o modification de les revoltes unicumpiente por un service qualificado.

11.1. Definition and description of classes and subsets of simplicial complexes
11.2. Definition and description of simplicial sets

BESCHRANKTE GARANTIE

1. Leesrins

2. Guarantees inscructions

3. Preste intang a bados or avioe.

4. Siga codes as instroques

Before adding or removing any external Euroack modules, make sure that the EUROACK GO is turned OFF and the power adapter is unplugged.

Before powering up the EUROPRACK SO, make sure all modules are secured with the screws provided, to prevent them from falling into the chassis.

When installing modules, make sure they do not touch any of the circuit boards or electrical components or the near chassis. Make sure the module ribbon power cables do not become trapped or crushed.

Use only the supplied power adapter.

In operation, the unit is open, and free voltages are present. Do not touch any of the internal exposed electronic parts, circuit boards or connectors. Do not use in the presence of water or liquids.

Failure to follow instructions may lead to permanent injury or serious damage to the internal components and any connected toracack modules.

PRECAUCON

EURORACK GO Hook-up

WARNING: Use only the Supplied Power Adapter

EURORACK GO Typical Module Installation (Behringer MODEL D synthesizer shown)

EURORACK GO Features

EN

EURORACK GO Pin Outs

Zones

+12 VDC Supply

CAUTION: Do not exceed 1A for each Zone A, B, or C

+5 VDC Supply

CAHIECDo not exceed 10totalZonesA+B+C)

-12 VDC Supply

CAUTION: Do not exceed 1A total (Zones A+B+C)

Quick Start Guide

15

EURORACK GO Module Example

EN

Behringer MODEL D

Connect End P1 to connector X23 on the MCOEL D PCB

Connect End P2 to any connector on the EUROPACK GO

CAUTION Due to the power requirements of the BLOOD, D_f do not connect any other modules to the same Zone (A, B, or C) on the EUROBACK GO

16 LURONACKCO

EURORACK GO Dimensions

Maximum Depth of Modules that can be inserted

CAUTION:

CAUTION:

Maximum depth of module that can be inserted anywhere in the root section is 40mm [1.57]

Maximum depth of module that can be inserted in the front section varies according to the location as shown

Quick Start Guide

Specifications

Connectivity
Rear panel	DC Power Input
	Power switch (roger)
Pulse Requirements
External power adaptor (see only the supplied adapter(s))	13 VDC, 56
Power consumption 63 W maximum
PCB Connectors
Power bus outputs and pin outs	Quantity 20, back header, straight, 16 pins, 2 rows, pitch 2.54 mm Quantity 12, back header, angled 90 degrees, 18 pins, 2 rows, pitch 2.54 mm
	+570C @1A (All zone total, pins 11, 12)
	-12VDC @ 1A (6120mm, pins 1, 2)
	+12VDC @ 1A (Section A total), pins 9, 10
	+12VDC @ 1A (Section B total), pins 9, 10
	+12VDC @ 1A (Section C total, pins 9, 10
Other bus connections and pin outs	Cr, pins 13, 14
	Gate, pins 15, 16
	Ground, pins 3, 4, 5, 6, 7, 8
Environmental
Operating temperature range: SYC - 45°C; (11°F - 104°F)
Environment Dry, Indoor use only
Physical
Dimensions: [4×W×D] (Flat with tilt-and-shape)	1/2×7/33×311 mm (4.4×28.5×12.2")
Module width: 7 layers of 140/140 mesh (fully adjustable width)
Maximum depth of module that can be inserted	40 mm (1.57") - 62 mm (7.44")
Weight: 3.9 kg (8.6 lbs)
Accessories
Included power adaptor

Other important information

EN Important information

1. Register online. Please register your new Mark 300 equipment right after you purchase a jetting between.com. Registering your purchase using our simple online form helps us to process your repair订单 more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Title Authorised Reseller not be installed in your system, you may contact the Music Title Authorised Publisher for your country listed under "Support" at thebteger.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at thebteger.com. Alternatively, please submit an online warranty claim at thebteger.com BEFORE returning the product.
3. Power Connections. Before plotting the unit into a power outlet, please make sure you are using the correct male voltage for your particular model.
   Family lines must be replaced with lines of the same type and rating without exception.

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 901 Grier Drive

Las Vegas, NV 89118

USA

Phone Number: [phone]

EURORACK GO

complies with the FCC rules as mentioned in the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 5b of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can calculate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Recipient or recipient the receiving antenna

• Increase the separation between the equipment and receivables

• Connect the equipment into an outlet on a circuit different from that to which the

receivrs

• Consult the dealer or an experienced radio TV technician for help

This device complies with Part 15 of the FCF rules. Operation is subject to the

（20

[1] this device may not cause harmful interference, and

[2] this device must accept any interference received, including interference that may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly apprmted by Music The

can void the user's authority to use the equipment.

Quick Start Guide

21

We Hear You