K 1600 GTL (2020) - Motorcycle BMW - Free user manual and instructions

Features	Details
Engine	6-cylinder inline engine, 1649 cm8, 160 hp at 7750 rpm
Torque	Maximum torque of 175 Nm at 5250 rpm
Transmission	6-speed transmission, chain
Weight	Dry weight of 348 kg
Fuel tank capacity	Fuel tank of 26.5 liters
Consumption	Average consumption of 5.5 L/100 km
Seat height	Seat height of 750 mm
Braking system	Disc brakes with ABS, combined braking
Safety equipment	Traction control, LED lighting, alarm system
Technology	10.25-inch TFT screen, integrated GPS navigation
Comfort	Adjustable suspension, ergonomic seats, wind protection
Maintenance	Recommended maintenance intervals every 10,000 km
Warranty	2-year warranty with unlimited mileage

Frequently Asked Questions - K 1600 GTL (2020) BMW

How to reset the BMW K 1600 GTL onboard computer?

To reset the onboard computer, turn off the motorcycle, then press the start button while holding down the trip meter reset button until the screen displays \"Resetting\".

What to do if the motorcycle does not start?

First check the battery. If it is discharged, try recharging or replacing it. Also make sure the kill switch is in the \"ON\" position and the side stand is raised.

How to adjust the seat height of the BMW K 1600 GTL?

The seat height can be adjusted using the levers located on each side of the seat. Unlock the levers, adjust to the desired height, then lock the levers in place.

What types of fuel are recommended for the BMW K 1600 GTL?

It is recommended to use unleaded gasoline with a minimum octane rating of 95 RON to ensure optimal performance.

How to check tire pressure?

Use a tire pressure gauge. Check tire pressure when cold, referring to the recommended values in the owner\'s manual for front and rear tires.

What to do if the dashboard displays an error message?

If an error message appears, consult the owner\'s manual to identify the error code. If the problem persists, contact a BMW dealer for a thorough diagnosis.

How to perform regular maintenance on the BMW K 1600 GTL?

Follow the recommended maintenance schedule in the owner\'s manual, which includes regular checks of oil, filters, brakes, and fluids.

How to sync my smartphone with the motorcycle\'s audio system?

Enable Bluetooth on your smartphone and on the motorcycle\'s audio system. Search for available devices and select your motorcycle to establish the connection.

What accessories are compatible with the BMW K 1600 GTL?

You can find a range of compatible accessories such as saddlebags, GPS mounts, and security systems on the official BMW website or at authorized dealers.

How to clean and maintain my motorcycle\'s paint?

Use a mild soap and water to clean the surface, then dry with a microfiber cloth. Apply a motorcycle-specific polish to protect the paint and give it shine.

USER MANUAL K 1600 GTL (2020) BMW

CONTACT AVEC KEYLESS RIDE

12.06.2016 and during transition

Part 15 of the FCC rules.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifi- cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Declaration Of Conformity R&TTE Declaration Of Conformity (DoC)

We: with the address: Meta System S.p.A. Via Majakovskij 10 b/c/ d/e 42124 Reggio Emilia –Italy Declare Under own responsibility that the product:

To which this declaration relates is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC). This product is in conformity with the following standards: Health & Safety (art.3.1) EMC (art.3.2) Spectrum Human exposure EN 60950-1

EN 62311 According to Directive 1999/5/ CE Reggio Emilia , 14/07/2010 Technical Director Lasagni CesareDeclaration of Conformity Radio equipment Keyless Ride Simpl ified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after

12.06.2016 and during transition

yless Ride ID Device FCC ID: YGOHUF5750 IC: 4008C -HUF5750 Canada: Operation is subject to the following two conditions:

evice may not cause harmful

nterference, and (2) this d evice must accept any interference received, including interference that may cause undesired operation. Any chang es or modifications not expressly approv ed by the party responsible for compliance could void the user’s authority to operate the equipment.Argentina: H-17115 USA: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

nterference that may cause undesired operation.Declaration Of Conformity We declare under our responsibility that the product BMW Keyless Ride ID Device (Model: HUF5750) camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards:

safety requirements contained in article 3 (1) a)

• EN 60950-1:2006+A11:2009+A1:2010+A12:2011; Information technology equipment-Safety

2. Protection requirements with respect to electromagnetic

compatibility article 3 (1) b)

• EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements

• EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short range devices (SRD) operating on frequencies between 9 kHz and 40 GHz

3. Means of the efficient use of the radio frequency spectrum

• EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment tobe used in the 25 MHz to 1000 MHz frequency range with power Ieveis ranging up to 500 mW;

Part 1: Technical characteristics and test methods.

Part 2: Harmonized EN covering essential requirements under

article 3.2 ofthe R&TIE directiveThe product is Iabeted with the CE marking: Velbert, October 15

, 2013 Benjamin A. Müller Product Development Systems Car Access and Immobilization - Electronics Huf Hülsbeck & Fürst GmbH & Co. KG Steeger Straße 17, D-42551 VelbertDeclaration of Conformity Radio equipment tyre pressure control (RDC) Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after

12.06.2016 and during transition

modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.

Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.Declaration of Conformity Radio equipment intelligent emergency call Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after

12.06.2016 and during transition

period Technical information Antenna internal: Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 22 dBm Not acessable by user: Frequency Band: 1710 MHz - 1785 MHz Radiated Power [TRP]: < 26 dBm Frequency Band: 1920 MHz - 1980 MHz Radiated Power [TRP]: < 22 dBm Frequency Band: 880 MHz - 915 MHz Radiated Power [TRP]: < 23 dBm

12.06.2016 and during transition