R 1250 RT (2022) - Motorcycle BMW - Free user manual and instructions

USER MANUAL R 1250 RT (2022) BMW

Side profile of a white BMW 500 motorcycle with black accents and chrome finish, shown from front and side (no visible text or symbols)

Données de la moto

Modèle

Labeled diagram of a motorcycle interior showing six numbered parts for identification

Technical diagram of a car's internal components with numbered labels pointing to different parts.

9 Multi-Controller (119)

Diagram of a car interior showing labeled components including a stop button and five numbered parts

Autodiagnos- tic DTC non ter- miné (→ 60)

est allumé.

Off!

DTC désactivé (→60)

CONTACT AVEC KEYLESS RIDE 71

COUPE-CIRCUIT 77

APPEL D'URGENCE INTELLIGENT 77

ÉCLAIRAGE 80

CONTRÔLE DYNAMIQUE DE LA TRACTION (DTC) 83

RÉGLAGE ÉLECTRONIQUE DU CHÂSSIS (D-ESA) 84

MODE DE CONDUITE 85

RÉGULATEUR DE VITESSE 86

RÉGULATEUR DE DISTANCE (ACC) 89

ASSISTANT DE DÉMARRAGE EN CÔTE 96

ALARME ANTIVOL (DWA) 99

CHAUFFAGE 102

VIDE-POCHES 104

VERROUILLAGE CENTRALISÉ

VALISE

108

113

70 UTILISATION

SERRURE DE CONTACT/AN- TIVOL DE DIRECTION

Clé de contact

Diagram showing a device with labeled parts 1 and 2, likely indicating components or functions.

Diagram of a mechanical component with numbered parts labeled 1, 2, and 3

Close-up of a mechanical device with a blue indicator light and numbered label (1), no readable text or symbols beyond the indicator.

1 Coupe-circuit

A B STOP

Diagram of a mechanical device with numbered components labeled 3 and 4

Close-up of a mechanical device with control buttons and a blue indicator line (no readable text or symbols)

Close-up of a black brake switch mechanism with blue circular indicator (1) pointing to the handle (no text or symbols on the diagram itself)

Close-up of a hand gripping a mechanical control switch with buttons and a blue indicator light (no text or symbols visible)

Close-up of a hand gripping a black brake switch with control buttons and a blue indicator line (no text or symbols on the diagram itself)

Close-up of a mechanical device with a blue indicator light and numbered label (1), no readable text or symbols beyond the indicator.

RÉGULATEUR DE VITESSE

SET RES OFF/ON 1 2

1 SET RES OFF/ON

1 SET RES OFF/ON

Close-up of a hand gripping a mechanical device with buttons and a blue circular indicator labeled '1' (no text or symbols on the device itself)

Close-up of a hand gripping a device with buttons and a labeled component (no readable text or symbols)

Close-up of a hand gripping a device with control buttons and a blue indicator light (no text or symbols visible)

Mechanical lever diagram showing hand positioning and blue circular indicator (no text or symbols)

Mechanical lever diagram showing a hand holding a shaft with a blue circular indicator labeled '1' and a blue curved arrow indicating rotational motion (no text or symbols beyond the label)

ALARME ANTIVOL (DWA)

Diagram showing two car door lockers with labeled parts, one on a diagonal line and the other on a circular port.

Two identical car parts with blue numbered annotations, connected by a diagonal line (no text or symbols on parts)

Close-up of a mechanical component with a blue circular marker labeled '1' pointing to a key pivot (no text or symbols on the object itself)

Close-up of a car's left-hand shift lever mechanism (no text or symbols visible)

Diagram of a device interior with numbered components labeled 1, 2, and 3

Diagram showing two labeled components of a device with blue arrows pointing to specific parts, likely illustrating a mechanical or electronic assembly.

Close-up of a black car door handle with a blue label pointing to the front panel (no text or symbols on the object itself)

1 2 3

3D model of a black ergonomic device with a circular handle and labeled point 1 (no text or symbols on the device itself)

e RELEASED DCA

Close-up of a black mechanical component with a blue circular marker labeled '2' pointing to a specific area (no text or symbols beyond the number)

Déposer la valise

RELEASE® 300Ω

Close-up of a mechanical component with a blue circular marker labeled '3' pointing to a specific part (no text or symbols beyond the number)

Mechanical component diagram showing directional arrows and a numbered label (1), no readable text or symbols present.

Mechanical assembly diagram showing fluid flow direction with blue arrows and a numbered label (1), no readable text or symbols present.

Mechanical component diagram showing fluid flow paths with blue arrows and numbered label (1), no readable text or symbols beyond annotations

Mechanical component diagram showing fluid flow paths with blue arrows and a numbered label (1), no readable text or symbols present.

Mechanical component diagram showing fluid flow paths with blue arrows and a numbered label (1), no readable text or symbols present.

Commander la lecture audio

1 2 ager.

Mechanical assembly diagram showing fluid flow paths with blue arrows and numbered component (no text or symbols)

Close-up of a control panel with four labeled buttons (1-4), no visible text or symbols beyond the numbers.

Activation de stations

-Stations non sous-

Close-up of a car front mirror showing the side and side view (no text or symbols visible)

Close-up of a mechanical hand gripping a control switch mechanism (no text or symbols visible)

Mechanical component with blue directional arrows indicating rotation or movement (no text or symbols)

Mechanical component with blue arrows indicating rotational motion, no text or symbols present

Diagram showing a car seatbelt mechanism with labeled parts 1 and 2, indicating directional movement or motion.

Technical diagram showing three labeled components (1, 2, 3) of a mechanical assembly or assembly process.

Cross-sectional diagram of a mechanical device showing internal components and a numbered label (1), no readable text or symbols present.

Technical diagram of a robotic arm with labeled parts 1 and 2, showing mechanical components and alignment indicators.

Technical diagram of a mechanical assembly with numbered annotations pointing to components

Diagram of a robotic device with numbered parts labeled 1 and 2

Two mechanical clamps with black treads and blue circular indicators labeled L and H (no text or symbols on the clamps themselves)

- Poser la selle pilote. ( 162)

Close-up of a mechanical component with a blue arrow pointing to a specific part (labeled '1'), no visible text or symbols beyond the number.

Close-up of a mechanical component with a blue arrow pointing to a specific part (no visible text or symbols)

Mechanical assembly diagram showing a component with gears and housing, no visible text or symbols

Close-up of a mechanical component with labeled parts, showing internal gears and housing (no readable text or symbols)

s s 1 age

Close-up of a mechanical component with a blue 'MAX' label pointing to it (no other text or symbols visible)

Close-up of a car intake manifold with a blue 'MAX' label (no other text or symbols)

Diagram of a device casing with numbered annotations pointing to components

Diagram of a mechanical component with numbered parts labeled 1 and 2

Black-and-white photo of a cutaway view of a motorcycle with open hood and visible engine compartment (no text or symbols)

Close-up of a mechanical component with visible brackets and joints (no text or symbols)

ATTENTION

ATTENTION

Close-up of a mechanical component being held by a tool, no visible text or symbols

tivation de la came de charge

Mechanical device with two wheels and a curved handle (no text or symbols visible)

Close-up of a mechanical component with a blue indicator arrow pointing to a numbered point (1), no visible text or symbols.

ATTENTION

Mechanical component with blue directional arrows indicating flow or movement (no text or symbols)

Mechanical assembly diagram showing motor and gear components (no text or symbols)

Close-up of a mechanical component with blue directional arrows indicating force or movement (no text or symbols)

1,0 mm (uniquement garni- ture de friction sans plaque support.)

224 MAINTENANCE

Mechanical component diagram showing a housing assembly with labeled part '1' (no text or symbols beyond label)

Close-up of a black mechanical component with a blue 'MIN' label, no readable text or symbols on the main subject.

Close-up mechanical assembly showing gears and components (no visible text or symbols)

MIN MAX MIN

Close-up of a car's front wheel and dashboard showing internal components (no text or symbols visible)

Close-up of a mechanical component with no visible text or symbols

Diagram of a car interior with numbered components and directional arrows indicating flow or movement.

Close-up of a mechanical assembly with gears and components, no visible text or symbols

Diagram of a car interior with numbered components and blue arrows indicating flow or movement paths.

Close-up of a motorcycle wheel and side brackets, no visible text or symbols

Technical diagram of a scooter's front wheel and side mirror assembly with numbered annotations

Mechanical assembly diagram showing a hand operating a vehicle chassis with no visible text or symbols

Mechanical assembly diagram showing a gear and shaft component with a blue numbered label (1) pointing to a specific part.

Mechanical assembly diagram showing a gear and shaft components (no text or symbols)

Mechanical assembly diagram showing a robotic arm with labeled component '1' (no text or symbols beyond label)

Mechanical assembly diagram with numbered components and blue annotation arrows

Mechanical assembly diagram showing a linkage mechanism with a blue numbered marker (1) pointing to a specific component.

Close-up of a motorcycle's side panel showing steering wheel and keyway (no text or symbols visible)

Close-up of a car wheel with visible tire and brake components, no text or symbols present

Close-up of mechanical gear components with blue circular annotations (1 and 2) indicating specific parts, no readable text or symbols present.

Close-up of a car wheel with visible tire and brake components, no text or symbols present

Diagram of a motorcycle body with numbered components, likely for safety or repair instructions

Diagram of a mechanical assembly with numbered components and a blue directional arrow indicating motion or flow.

Close-up of a mechanical component with a blue indicator arrow pointing to a small blue dot (no text or symbols visible)

Diagram of a car charging station with numbered components and directional arrow indicating charging direction

Diagram of a mechanical assembly with numbered components and directional arrows indicating motion or flow.

Diagram of an electric vehicle battery with labeled components and directional arrows indicating flow or connection.

Close-up of a mechanical component with a blue indicator light and numbered label (1), no readable text or symbols present.

Technical diagram of a mechanical assembly with numbered components labeled 1, 2, and 3

Technical diagram of a car interior with numbered annotations pointing to specific components

Close-up of a mechanical assembly with visible components and a numbered label (1) pointing to a specific part.

Technical diagram of a mechanical assembly with numbered annotations pointing to components

Interior view of a battery pack with visible battery and casing (no text or symbols)

Technical diagram of a mechanical assembly with numbered components labeled 1 and 2

Close-up of a black battery pack with visible internal components and a blue circular marker labeled '1' (no text or symbols on the main subject)

1 atte- 2

Technical diagram of a car interior with numbered annotations pointing to specific components

Close-up mechanical assembly showing internal components with a blue arrow and numbered marker (1), no readable text or symbols present.

Close-up mechanical assembly showing internal components and a numbered label (1) pointing to a specific part.

1 50 A

Close-up of a mechanical assembly with a blue circular marker labeled '1' pointing to a component (no readable text or symbols beyond the number)

1 15 A

Technical diagram of a mechanical assembly with labeled components 1 and 2, showing internal components and directional arrows.

Diagram of automotive electrical connectors with numbered labels pointing to components

Close-up of a mechanical assembly with a numbered label pointing to a component (no readable text or symbols)

ct. pa- e

Close-up of a car rear bumper with a blue indicator arrow labeled '2' pointing to a component (no text or symbols on the object itself)

Close-up of a mechanical device with a blue upward arrow indicating motion or change (no text or symbols visible)

Diagram of a device's internal components with numbered parts and directional arrows indicating rotation or movement.

Close-up of a mechanical device with a blue arrow indicating rotational motion (no text or symbols)

op- fond. 5

Side view of a silver and silver motorcycle with front wheel and rear cargo bay (no visible text or symbols)

Votre partenaire

BMW Motorrad vous

Close-up of a car's internal mechanical assembly, showing no visible text or symbols

pmw-motorrad.com/service

DECLARATION OF CONFORMITY 311

CERTIFICAT L'ANTIDÉMARRAGE ÉLECTRONIQUE 314

CERTIFICAT POUR LA TÉLÉCOMMANDE 317

CERTIFICAT POUR LE KEYLESS RIDE 321

CERTIFICAT POUR LE CONTRÔLE DE LA PRESSION

DES PNEUS 325

CERTIFICAT POUR LE COMBINÉ D'INSTRUMENTS TFT 326

CERTIFICAT POUR LE RÉGULATEUR DE DISTANCE 330

DECLARATION OF CONFORMITY

Manufacturer

Hereby, BMW AG declares that the radio equipment compl listed below are in compliance with Directive 2014/53/EU and with Radio Equipment Regulations 2017 of the United Kingdom. The full text of the EU/UK declarations of conformity are available at the following internet address:

bmw-motorrad.com/certification

Simplified EU Declaration of Conformity according to EU (2014/53/EU).

312 ANNEXE

Technical information

Radio equipment	Com- ponent	Frequency band Output/	Transmis-sion Power
EWS4 EWS 134	kHz		50 dBμV/m
HUF5750	Keyless Ride	434,42 MHz 10 mW
HUF8465	Keyless Ride	134,45 kHz	42 dBμV/m
HUF5794	Keyless Ride	433,92 MHz 10 mW
HUF8485	Keyless Ride	134,45 kHz	42 dBμV/m
ZB001	Keyless Ride	134.5 kHz	allowed66 dBμA/m@ 10m
ZB002	Keyless Ride	433.92 MHz	max.10 dBme.r.p
TXBMWMR	DWA	433.05 MHz - 434.79	MHz 18,8 dBm
RDC3 RDC 433.92 MHz <13 mW
Wus Moto gen 3	RDC 433,05 MHz - 434,79 MHz		<10 mWe.r.p.
MC24-MA4	RDC
WCA Motorrad-Lades-taufach	Charging compartment	110 kHz - 115 kHz <	6 W
ICC6.5in	Instrument Cluster	Bluetooth: 2402 MHz -2480 MHzWLAN: 2412 MHz -2462 MHz	Bluetooth:< 4 dBmWLAN: <20 dBm
Radio equipment	Com-ponent	Frequency band Output/	Transmission Power
ICC10in	InstrumentCluster	Bluetooth: 2402 MHz - 2480 MHzWLAN: 2402 MHz - 2472 MHz	Bluetooth:< +4 dBmWLAN: < +14 dBm
MRR e14FCR	ACC 76	- 77 GHz	Peak max.32 dBmNom max.27 dBm
TL1P22	Intelligent emergency call	832 MHz - 862 MHz880 MHz - 915 MHz1710 MHz - 1785 MHz1920 MHz - 1980 MHz2500 MHz - 2570 MHz2570 MHz - 2620 MHzGNSS: 1559 MHz-1610 MHz	23 dBm33 dBm30 dBm24 dBm23 dBm23 dBm
MCR001	Audio system

Declaration of Conformity

Radio equipment electronic immobiliser (EWS4)

For all countries without EU

Technical information

Frequency Band: 134 kHz (Transponder: TMS37145 / Type DST80, TMS3705 Transponder Base Station IC) Output Power: 50 dBμV/m

Manufacturer and Address

Australia/New Zealand

R-NZ

Brunei

AITI

TA No: DTA-007061

United Arab Emirates

TRA REGISTERED No: ER89926/20 DEALER No: DA96133I20

Philippiens

NTC

Type Approved No.: ESD-RCE-2023298

South Africa

ICASA

TA-2020/6131

APPROVED

India

ETA-SD-20200905860

Belarus

Indonesia

72790/SDPPI/2021

13349

Warning sign with exclamation mark inside a triangle, commonly used to indicate caution or hazard.

QR code image containing encoded data, no visible human-readable text

Simple geometric diagram with a semicircle and two overlapping rectangles (no text or symbols)

CONATEL

NR: 2020-11-I-0834

Singapore

Complies with IMDA Standards N3504-20

Taiwan

Geometric diagram of a triangle with an inscribed circle and the acronym MCMC below (no text or symbols within the diagram itself)

RFCL/47A/0920/S(20-3358)

Israel

This device complies with part 15 of the FCC Rules and Industry Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC § 15.21 Information to user

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Exposure Requirements

To comply with FCC RF exposure compliance requirements, the device must be installed to provide a separation distance of at least 20 cm from all persons.

Serbia

Three black triangles arranged in a triangular pattern (no text or symbols)

P1620118300

Canada

Contains IC:

10430A-MREWS5012

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

NAME CORE ICT

A1109091120AF04A3

Certifications Remote Control for central locking system

Top-down view of a black and white car door handle with a silver seat (no text or symbols)

Česky

Hereby, Meta System S.p.A., declares that this PF240009 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español

Product name: TX BMW

MR FCC ID: P3O98400

IC:4429A - TXBMWMR

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Declaration Of Conformity

R&TTE Declaration Of Conformity (DoC)

CE0470

We:

Meta System S.p.A.

with the address:

Via Majakovskij 10 b/c/d/e 42124

Reggio Emilia, Italy

Declare

Under own responsibility that the product:

TX BMW MR

To which this declaration relates is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC).

This product is in conformity with the following standards:

Health & Safety (art. 3.1)

EMC (art. 3.2)

Spectrum Human exposure

EN 60950-1

ETSI EN 301 489-1/-3

ETSI EN 300 220 - 2

EN 62311

According to Directive 1999/5/

CE Reggio Emilia, 14/07/2010

leejocup

Technical Director Lasagni Cesare

Certifications

BMW Keyless Ride ID Device

3D rendered image of a black and silver remote control device with a circular dial and control buttons (no text or symbols visible)

USA, Canada:

Product name: BMW Keyless Ride ID

Device FCC ID: YGOHUF5750

IC: 4008C-HUF5750

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Canada:

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

USA:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Argentina:

Declaration Of Conformity

We declare under our responsibility that the product

BMW Keyless Ride ID Device (Model: HUF5750)

camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards:

1. Health and safety requirements contained in article 3 (1) a)

- EN 60950-1:2006+A11:2009+A1:2010+A12:2011; Information technology equipment-Safety

1. Protection requirements with respect to electromagnetic compatibility article 3 (1) b)

- EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements

- EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short range devices (SRD) operating on frequencies between 9 kHz and 40 GHz

1. Means of the efficient use of the radio frequency spectrum article 3 (2)

- EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment tobe used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW;

Part 1: Technical characteristics and test methods.

Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TIE directive

The product is labeled with the CE marking:

CE

Velbert, October 15 ^th , 2013

Benjamin A. Müller Product Development Sys

Product Development Systems Car Access and Immobilization - Electronics Huf Hülsbeck & Fürst GmbH & Co. KG

Steeger Straße 17, D-42551 Velbert

Certification Tire Pressure Control (TPC)

FCC ID: MRXBC54MA4

IC: 2546A-BC54MA4

FCC ID: MRXBC5A4

IC: 2546A-BC5A4

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

Declaration of Conformity

Radio equipment TFT instrument cluster

For all Countries without EU

Model name: ICC10in

Technical information

The ICC10in can operate in one of two operating modes:

1. Normal mode, with
   Bluetooth and WLAN on, and
2. Radio off mode (only available during vehicle manufacturing).

BT operating frq. Range:

2402 - 2480 MHz

BT version: 4.2 (no BTLE)

BT output power:

< +4 dBm (internal antenna)

WLAN operating frq. Range:

2402 - 2472 MHz

WLAN standards:

IEEE 802.11 b/g/n

WLAN output power:

< +14 dBm (internal antenna)

Manufacturer and Address

Manufacturer:

Robert Bosch GmbH

Address:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiofrequency radiation exposure Information: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications made to this equipment not expressly approved by Robert Bosch GmbH may void the FCC authorization to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Japan

This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese

Telecommunications Business Law (電気通信事業法)

This device should not be modified (otherwise the granted designation number will become invalid)

本製品の改造は禁止されています。

(適合証明番号などが無効となります。)

R

201-200559

T

20 0138 201

Korea

Equipment Name: BMW A-Kombi

Basic model number: ICC10in

Manufacturer/Country of Origin:

Robert Bosch GmbH/포르투갈

Zertifikatsnummer:

R-R-BO2-ICC10in

Mexico

Declaration of Conformity

Mid Range Radar

For all Countries without EU

Model name: MRRe14FCR

Technical information

Frequenzy band: 76 - 77 GHz Nominal radiated power: e.i.r.p. (peak detector): 32 dBm Nominal radiated power: e.i.r.p. (RMS detector): 27 dBm

Manufacturer and Address

Manufacturer: Robert Bosch GmbH Address: Robert-Bosch-Platz 1, 70839 Gerlingen, Germany

TRA REGISTERED No: ER55421/17 DEALER No: DA36758/14

ICASA

TA-2017/2013

APPROVED

AGREE PAR L'ANRT MAROC

Warning symbol with a triangle and checkmark inside (no text)

CNC

Type Approved No. ESD-1716172C

IFETEL: RCPBOMR17-0598

TRC No. TRC/LPD/2017/254

Geometric diagram of a triangle with an inscribed circle and the acronym MCMC below (no additional text or symbols)

CIDF15000490

CLASS A NBTC ID. A57003-17-0042

Complies with IMDA Standards DB03227

Complies with IMDA Standards DB 105658

Simple geometric diagram with two overlapping shapes (no text or symbols)

CONATEL

2017-06-0000162

72726/SDPPI/2021 13349

CCAE17LP0940T7

Canada NOTICE

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiofrequency radiation exposure Information:

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

United States (USA) NOTICE:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications made to this equipment not expressly approved by Robert Bosch GmbH may void the FCC authorization to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Radiofrequency radiation exposure Information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Japan

Translation: This equipment contains specified radio equipment that has been certified to the technical regulation conformity certification under the Radio Law.

Translation: This radio device should not be modified (otherwise the granted designation number will become invalid)

Mexico

HKCA 1035: automotive radar: radio equipment exempted from licensing!

South Korea

[Class B Equipment]

Translation: This equipment has been approved under EMC Registration as a Class B device (for domestic use) and can be used in both residential and commercial areas.

[RF Warnings]

Translation: This radio equipment has potential for interference during operation.

Taiwan, Republic of

注意!

Élément de commande, 23, É 24

Couper le contact, 73

Abonner la station, 151

Appel d'une station

mémorisée, 153

Disponibilité, 151

Keyless Ride, 42, 43

Mon véhicule, 133

Moteur, 50