2832 AA - Screwdriver SKIL - Free user manual and instructions

Technical Specifications	SKIL 2832 AA cordless screwdriver, maximum torque of 30 Nm, no-load speed of 0-350/0-1300 rpm, 12V Li-ion battery, 1-hour charging time.
Usage	Ideal for screwing and unscrewing in wood, metal, and plastics, suitable for home DIY tasks.
Maintenance and Repair	Regularly clean the air filter, check the battery condition, replace worn screwdriver bits.
Safety	Wear safety glasses, do not use the tool in wet environments, keep out of reach of children.
General Information	Lightweight for easy handling, ergonomic design, 2-year warranty, included accessories: charger and bits.

Frequently Asked Questions - 2832 AA SKIL

How do I charge the SKIL 2832 AA screwdriver?

To charge the SKIL 2832 AA screwdriver, plug the supplied charger into a power outlet and connect it to the screwdriver's battery. Make sure the battery is properly inserted and let it charge until the charge indicator turns green.

Why is my screwdriver not working?

Check that the battery is properly charged and inserted. If the screwdriver still does not work, try resetting the device by removing and reinserting the battery.

How do I change the rotation direction of the screwdriver?

To change the rotation direction of the SKIL 2832 AA screwdriver, use the rotation switch located near the trigger. Push it forward for clockwise and backward for counterclockwise.

What type of drill bits can I use with the screwdriver?

The SKIL 2832 AA screwdriver is compatible with standard drill bits from 1.5 mm to 10 mm. Make sure to use bits suitable for the material you are working on.

How do I clean and maintain my screwdriver?

To clean the screwdriver, use a soft, dry cloth. Avoid using harsh chemicals. Regularly check the operation of moving parts and lubricate them if necessary.

What should I do if the screwdriver overheats?

If the screwdriver overheats, stop using it immediately and let it cool down. Also check if the battery is defective and if the device is being used continuously without breaks.

Where can I find spare parts for the SKIL 2832 AA screwdriver?

Spare parts for the SKIL 2832 AA screwdriver can be found on the official SKIL website or from authorized dealers. Make sure to verify the compatibility of the parts.

How do I know if my battery is defective?

If the screwdriver does not work despite a full charge and you have checked all other functions, the battery may be defective. Try another compatible battery to confirm.

What is the maximum torque of the SKIL 2832 AA screwdriver?

The maximum torque of the SKIL 2832 AA screwdriver is 30 Nm, making it suitable for a variety of assembly and drilling tasks.

Is the screwdriver equipped with LED lighting?

Yes, the SKIL 2832 AA screwdriver is equipped with LED lighting for better visibility when working in dark spaces.

USER MANUAL 2832 AA SKIL

Cordless drill/driver 1008/2830/2832 INTRODUCTION

• This tool is intended for drilling in wood, metal, ceramic and plastic; tools with electronic speed control and left/right rotation are also suitable for screwdriving and thread cutting
  This tool is not intended for professional use
• Read and save this instruction manual ③

TECHNICAL DATA①

Max. torque for hard screwdriving application according to ISO 5393:41Nm (1008 & 2830)]/54Nm (2832)

TOOLELEMENTS ②

A Switch for on/off and speed control
B Green charging light
C Red charging light
D Ring for torque control
E Lock-position (clutch)
F Switch for changing direction of rotation
G Gear selector (2832)
H Spot light
J Ventilation slots
K Charger

SAFETY

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (cored) power tool or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

2) ELECTRICAL SAFETY

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

3) PERSONAL SAFETY

4) POWER TOOL USE AND CARE

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130^ may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

6) SERVICE

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SAFETY INSTRUCTIONS FOR CORDLESS DRILL/ DRIVERS

GENERAL

• Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction with additives for wood conditioning; wear a dust mask and work with a dust extraction device when connectable
• Follow the dust-related national requirements for the materials you want to work with
• Do not work materials containing asbestos (asbestos is considered carcinogenic)
• Ensure that switch F ② is in the middle (locking) position before making any adjustments or changing accessories as well as when carrying or storing the tool

ACCESSIONS

• SKIL can assure flawless functioning of the tool only when original accessories are used
• Use only accessories with an allowable speed matching at least the highest no-load speed of the tool

BEFORE USE

• Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them before you start working
• Always check that the supply voltage is the same as the voltage indicated on the nameplate of the charger
• Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than by hand)
• Use suitable detectors to find hidden utility lines or call the local utility company for assistance (contact with electric lines can lead to fire or electrical shock; damaging a gas line can result in an explosion; penetrating a water pipe will cause property damage on an electrical shock)

DURING USE

• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fastener may contact hidden wiring (cutting accessory and fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock)
• In case of electrical or mechanical malfunction, immediately switch off the tool or unplug charger from power source

CHARGING/BATTERIES

This charger can be used by children aged 8 and

above and by persons who have physical, sensory or mental limitations or a lack of experience or knowledge if a person responsible for their safety supervises them or has instructed them in the safe operation of the charger and they understand the associated dangers (otherwise, there is a danger of operating errors and injuries)

Supervise children (this will ensure that children do not play with the charger)
- Cleaning and user maintenance of the battery charger shall not be made by children without supervision
- Only use SKIL charger 2610Z08495 or 2610Z08496 and SKIL battery pack 2610Z08494 with this tool
- Charge battery only with the charger that is supplied with the tool
- Do not touch the contacts in the charger
- Do not expose tool/charger/battery to rain
- Do not charge battery in damp or wet environments
- Do not use charger when damaged; take it to one of the officially registered SKIL Service Stations for a safety check
- Do not use charger when cord or plug is damaged; cord or plug should be replaced immediately at one of the officially registered SKIL Service Stations
- Do not use battery when damaged; it should be replaced immediately
- Do not disassemble charger or battery
- Do not attempt to recharge non-rechargeable batteries with the charger
- Permitted ambient temperature (tool/charger/battery): - when charging 0 +45^ - during operation -20 +50^ - during storage -20 +50^

EXPLANATION OF SYMBOLS ON TOOL/CHARGER/BATTERY

③ Read the instruction manual before use
④ Only use the charger indoors
Double insulation (no earth wire required)
⑥ Batteries may explode when disposed of in fire, so do not burn battery for any reason
⑦ Store tool/charger/battery in locations where temperature will not exceed 50^
Do not dispose of electric tools and batteries together with household waste material

USE

Combined switch for on/off and speed control A ② Control the speed steplessly from zero to maximum by putting less or more pressure on the trigger

• Charging battery ⑨

!remove battery from tool

• connect charger to power source as illustrated 9a
  -green light B will turn on indicating that the charger is ready for operation ⑨ a
  -insert battery into charger as illustrated 9b
  -red light C will turn on indicating that the battery is being charged ⑨ c

• after approximately 3 hours (2610Z08495) / 5 hours (2610Z08496) the battery is fully charged and green light B turns on ⑨ d

!remove battery from charger after charging period has ended thereby lengthening the service life of the battery

IMPORTANT:

-if red light C does not turn on after inserting a battery, this may mean that the battery is too cold or too hot (charger only charges batteries when its temperature is between 0^ and 45^ )
-the lithium-ion battery can be charged at any time (interrupting the charging procedure does not damage the battery)
-the lithium-ion battery does not have to be empty before charging (no "memory-effect" as with nickel-cadmium batteries)
-while charging, the charger and the battery may become warm to touch; this is normal and does not indicate a problem
-ensure that the outside surface of the battery is clean and dry before inserting into charger
-do not remove battery from tool while it is running
-if you anticipate long periods of non-use for the tool, it is best to unplug the charger from its power source
-when the lithium-ion battery is empty, the tool is switched off automatically
-a significantly reduced working period after charging indicates that the battery is worn out and should be replaced

• Changing direction of rotation 10

-when not properly set in left/right position, switch A② cannot be activated

!change direction of rotation only when tool is at a complete standstill

• Changing bits ⑪

!do not use bits with a damaged shank

• Torque control (VariTorque) ⑫

-output torque will increase as clutch ring D is rotated from 1 to 19; position E will lock up the clutch to permit drilling or driving heavy duty work
-when turning in a screw, first try VariTorque position 1 and increase until the desired depth has been reached

• Mechanical gear selection ⑬ (2832)

-set selector G to desired speed

!actuate the gear selector while tool is running slowly

LOW

-low speed
-high torque

-for screwdriving and drilling large diameters

-for tapping thread

HIGH

-high speed

-lower torque

-for drilling small diameters

Battery protection

Switches off the tool or prevents the tool from being switched on, when

-the load is too high

the battery temperature is not within the allowable operating temperature range of -20 to +50^

-the lithium-ion battery is nearly empty (to protect against deep discharge)

!do not continue to press the on/off switch after the tool is switched off automatically; battery may be damaged

• Spot light H ⑭
  Spot light H automatically lights on when activating switch A ②
• Holding and guiding the tool 15
  !while working, always hold the tool at the greycoloured grip area(s)
  -keep ventilation slots J ② uncovered
  -do not apply too much pressure on the tool; let the tool do the work for you

APPLICATION ADVICE

Use the appropriate bits 16!only use sharp bits
- When drilling ferrous metals

-pre-drill a smaller hole, when a large hole is required -lubricate drill bit occasionally with oil

• When turning in a screw at/near the cross cut end or an edge of wood, pre-drill a hole in order to avoid cracking of the wood
• For an optimal use of the tool a steady pressure on the screw is required, especially while removing
• When screwdriving in hard wood one should pre-drill a hole
• Splinterfree drilling in wood ⑦
• Dustfree drilling in walls 18
• Drilling in tiles without skidding 19
  For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use
• Keep tool and charger clean

-clean charging contacts in charger with alcohol or contact cleaner!unplug charger from power source before cleaning

• If the tool/charger should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for SKIL power tools

• send the tool or charger undismantled together with proof of purchase to your dealer or the nearest SKIL service station (addresses as well as the service diagram of the tool are listed on www.skil.com)

• in case of a defective charger send both charger and battery to your dealer or the SKIL service station

ENVIRONMENT

• Do not dispose of electric tools, batteries, accessories and packaging together with household waste material (only for EU countries)

-in observance of European Directive 2012/19/EC on waste of electric and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility
-symbol ⑧ will remind you of this when the need for disposing occurs

!prior to disposal protect battery terminals with heavy tape to prevent short-circuit

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound pressure level of this tool is 76 (1008 & 2830) / <70 (2832) dB(A) and the sound power level 87 (1008 & 2830) dB(A) (standard deviation: 3 dB), and the vibration < 2.5m/s^2 (triax vector sum; uncertainty K = 1.5m/s^2 )
• The vibration emission level has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned

-using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
-the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level

!protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns

F

Perceuse/visseuse 1008/2830/2832 sans fil

INTRODUCTION

1) SIKKERHET PÅ ARBEIDSPLASSEN

2) ELEKTRISK SIKKERHET

VEDLIKEHOLD / SERVICE

MANUTENÇÂO / SERVICO

sahip olmayan kisiler
tarafindan ancak detetim
altinda veya Şarj cihazınin
güvenli kullanı hakkında
aydinlatildikları ve bu
kullanıma®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®,®. kavradikları takdirde kullanı bilir (aksi takdirde hatali kullanım ve yaralanma sehlikesi vardır)

EJEMHTH IHCTPYMEHTA②

A BmHKaH DnBn/BnKl Ta peryHOBAHH WBNkOcTi
B 3eJIeHn iHdNkAtOp 3apAHorO npncTpoIO
C YepBoHn iHdkaTOp 3apAnHO npncTpoH
D Kilbue nIpeRyIOBaHHM MOpENTy 6eptaHH
E ΦiKcObaHe nOJxHnR (MyΦTN)
F BmHKaHn3miHn HanpMy o6epTaHH
G Iepemnkauch WbNIOKcTi (2832)
H NiicbiKa
J BeHTnIauiHi OTBOpN
K 3apAHHn npncTpi

BE3NEKA

3AΓΑЛbHI BKA3IBHи 3 TEXHIKи БE3NEHINOBODKEHHI 3 EJEHTPOIHCTPYMEHTAMN

NONEPEDHEHHIpoHHTaIE BCI Bha3iBHN 3TexhiK6e3neHn, IHcTpYHci, IIOCTpaui Ta cNeuHiaui, HadaH3 cHm eHtPOIHcTpymeHOM. HeBHKoHaHHYycix noDaHnx HnKHe IHcTpYHci MoKe np3BecTn Do ypaKeHHN eJcTKpUHm CTPyMOM, NOHexi /a60 cepNo3HOIT PABMN. DObpe 36epiraTe ha MaibTyHc zu nonepedHeHH I BHa3iBHN. Pid NOHRTTM "eJekTponpnilad" B cHX nonepedKeHHX MaETbcs Ha yBa3i eJcTKponpnilad, 10 npauoe BiD MepeKi (3 eJekTpokaBelem) a6o BiD akymlyaTopHoI bTaapei (6e3 eJekTpokaBeIIO).

1)BE3NEHA HA POBOOYMICLI
a) PpMaTe CBOe po6Oe Micce B YnCTOTi Ta np6paTe Noro. Be3naI a6o noraHe oCBiTJeHHa Ho6OChy MlCi MoHytb Pn3BODHTn Do HeuacHnx BnJaKIB.
b) He npaioTe 3 npnaIadom y cepeOboNsi, de icHyEc He6e3neHa Bn6byu BnacIIOH npncyTHocTi ropUChx piDn, ra3iB a6o nnNy. EJeKtponpnuIaHi MOHyTb npoJkyBaTu iCKpn, BiJ RAHX MoKe 3aImMaTnCn PnI a6o napn.
c)Пдчac npaOBAHH3 npHJaOM He nipnychaTe do po6oHoro Micza diTe Ta iHxN IIOeB. BmOKeTe BtpaTHTN KOHTpOJIb NaI npHJaOM, RaIIO BaIaYBaRa 6yde BiDBepyTa.
2) EJEKTPNHA B63NEHA
a) ⅢTencelb npnilady noBHeH nacyBaTH Do po3eTN. He do3BOJrE7bcra 0o-He6ydb MInrN B wTeNCeli. Ipa o6Otn 3 npniladamn, 0o MaOTb 3axnche 3a3emJIeHH, He BHKOpNCTOByte aanTpEn. BHKOpNCtAHn opirHaJIbHoro wTeNCeIra Ta HaleJHOi po3eTK 3MeHwye pN3NK ydApy eJeKTPnuHMM CTpyMOM.

b) YHnKaIe HOHTaHTy TaCtei Tla i3 3a3eMLeHmN NOBepxHAMn, AKNap., Tpy6amn, 6aTapeA MOnaJIeHHa, NeaMn Ta XoIOAnlbHNkAmn. KoIN BaWe TiIo 3a3eMJIeHe, icHyE 36iNbueHa He6e3neKa ydApy eJIeKTPuHIM CTpyMOM.
c) 3axuatae npnaad BiD douy Ta BOIOn. IonaaHn BOIN B eJeKtpoiHCTpyMeHT 36iNbUye pN3NK yIapy eJeKtpuHm CTpyMOM.
d) He BnKOpNCTOByTe Ka6eIb IJIЯ nepeHeceHn npHaay, iDbiWyBaHHa 6o BNTaRyBaHHa WTeNCeIa 3 po3EtN. 3axuauTe Ka6eIb BiJ Kapn, oIIi, roctpIX KpaIB Ta deTale N pHaay, zo pyxaOTbc. PoIkwOJHeHn a6o 3akpyeHn Ka6eIb 36ilb7yEc pn3NK ydaPy eJeKTPnuHm Ctpymom.
e)ДЯЗOBHixpo6ITO6OB'3HOBOBnHOpNCTOByTe IHe TAHN NOOBHyBa, 0o DOnyueHn dIa 3OBHixpo6IT.BnKOpNCTaHHNoDObKyBaHa, 0o po3paXOBaHn Ha 3OBHHiPo6OTn, 3MeHUe pN3NK ydApyeJIeKTPuHNM CTpyMOM.
f) Ano He MoKHa 3ano6irTu BnHOpncTahHIO eJeHTponpnaJy y BOJoromy cepeoBnu, BnHOpncTOByTe npncptiN 3axnctTy BiD BnTOHy B 3eMJIb. BnKOpncTaHHa 3pncptoi 3axnctTy BiD BnTOky B 3eMJIIO 3MeHUnyepn3NK yApPy eJeHTpUHNm CTpyMOM.
3) B63NEHA JIODEI
a) BybTe yBaHmM, cIkyTe 3a Tm, uO Bn po6Te, Ta po3cyIINBO NOBdTecr nI qac po6ToN 3 eIeHTponpnaIam. He KopncTyItec npIaNOM, Anu Bu CTomJIeHi a6o 3haxODntecr nI d IieH HApHOTnHIB, CNPTnx HanoiB a6o liK. MItb HeyBaXHoCTi pni KopNCyBaHHi npIaNOM MoHe npI3BOHTn Do cepNo3Hx TpaBM.
b) BДЯгаTe OcO6NcTe 3axnCHe CnpoJKeHHa Ta o6OB'3HOBO BДяGaTe 3axnCHi OHyJIApH. BДяганнЯ OcO6NcTOrO 3axnCHOrO CnpoJKeHHa, RaHap., -ВЗалжнocTi BiD BVdu pObi - 3axnCHOI MaCKn, CpeuB3yTT, lo He KOB3aE TbCS, KaCKn a60 HabyuHnKIB,3MeHwye Pn3nCK TpaBM.
c) YHnHaTe HeHaBMnCHOrO BMnHaHH. Nepw HIX BMnHaTN eEeKtpOpnHlad B eEeKtpompeHy a6o BCTpOMJrTH anMyIaTOpHy 6aTaPeIO, 6patN HorO B pyKn a60 nepeHoCHTN, BneBHiTbcN B TOMy, 10 eEeKtpOpnHlad BmKHyTn. TpMaHH naJIbca Ha BMnKaYi NiD yac nepHeceHH eEeKtpOpnHady a6o BCTpOMJHNN B Po3eTKy YBIMKHyTORO npHaMy MoHe npn3BOuNTn Do TpaBM.
d) Ipepe THM, RA BMHNATN npHnla, npn6epiB HalaorOJyBaJIbHI iHCTpyMeHTn Ta raHOBn KIOU. 3HaxoJKeHHaHaIOrOJyBaJIbHOrO iHCTpyMeHTa a60 KIOUca B DeTAli, 1O o6ePTaEeTbcR, MoKe npn3BOIDNTI DO TpaBM.
e) He nepeoiciHouTe ce6e. 36epiraTe ctiHe noloxenHa Ta 3aBHN 36epiraTe pIBHObary. Lcdo3BOJntb Bam kpaue 36epiratn KOHTpoJIb HaI npuiAOM y HecnoiBaHnx CNTyaicix.
f) BdraTe npdaTnH oJr. He BdraTe npocToPn OaT Ta npKpacn. He ndTabnaTe BOLOccn OaTdo DeTale, 0p yxaOTbc. IpocToPn OJra, npKpacn Ta DObre BOLOCC MoKyb nonaTaN B deTani, 0p pyxaOTbc.
g) RaHIO icHyc MOHJIHBiCt b MOHTyBaTHn HNOBicMOHTyBaJIbHi a6o NINOYIOBNIOBaJIbHi npHCTpoI, nepeKHOHaITeCra, 06 BOHN 6yJN Do6pe

niEHaHITa npabNbHO BnHopncTOByBaIHC. BnKOpNCtAHn HINIOIDCMOKTyBaJIbHOrO pInCTPO MOHe 3MeHUnTI He6e3neKn, 3ymOBJIeHi nIOM.
h) Do6pe 3HaHH eJeKtpoiHcTpymeHTiB, OTPMaHe B pe3yIbTaTi qactoro IX BNHOpNCTaHH, He NOBHHO npn3BOJNTu DO CAMOBneBHeHOCTi IrhOpYBaHH npnHcunib TexHk6e3NeKn. Heo6peKHa dI MoKe B OdHy Mntb pIn3BecTn Do BaHKoI TpaBMn.
4) INPABINbHE IOBOJHKeHHa T A KOpNCTyBAHH EJEKTPONPNIAADAMN
a) He nepeBaHTaJyIe npJau, BnHOpNCTOByIte TaHn npJau, 10 cneiaJIbHo npH3HaueHn dJa neBHOi po6oTn. 3 npHaTHm npJauDom Bu 3 MeHIm pN3NKOM OTpIMaTe KpaJI pe3yJIbTaTn po6oTn, RaKIO 6yDeTe npaIOBaTn B 3a3HaueHomy diJana3OHi notyHKHOCTI.
b) He KopncTyIeTcA npnlaDom 3 noWhoJHHeHMMBmKauem. PpnaIa, JnH He MoHa yBIMKHyTu a6o BmKHyTu, E He6e3neuHm i NOro Tpe6a BiDpemOHTyBaTu.
c) Npeed TmM, RaK peryIIOBAtu 0o-He6yDb Ha npHnadi, MiHrTn npHnadJa a6o XOBaTH npHnad, BHTaRHiTb wTeNceJI b3 po3eTN Ta/a6o BHTaRHiTb anMyJITopHy 6aTaPeO, RaHTo BOHa 3Himaetcb. Li nonepeDkyBaJIbHI 3axOJN 3TexHIn 6e3neKn 3MeHsuOTb pIHNK HeHaBMCHOrO 3aNyCKy npHnady.
d) 36epiraIte eIeHTponpnilaHn, IHHMn Bn camHe HOpncTyecb, daJIeHO bID dITEH. He do3BOJnTe HOpncTyBaTcH eIeHTponpnilaDm Oco6am, 0o He 3Haomi 3 Noro pOboTOO a6o He uHTaNI ci Bha3IBHn. Y pa3i 3actocyBaHHN HeDCBIDueHMMN Oco6amn npnilaHn Hecytb B cObi He6e3neKy.
e) CtapaHNO dOrJaAte 3a eJcKtpoHcTpyMeHTamn i npHaadm. NepeBipTe, uO6 pyxomi detani npHa dy 6e3dorAHNO npauIOBaHn Ta He 3aIaHn, He 6yHn noIamaHmN a6o HactInbHN NowHOdHexHMn, uO6 ue MorNo BnHnHyTu Ha yHnCioHyBaHH npHa dy. NooHDHei Detani Tpe6a BiDpemOHtBuATn B ABTOPn3OBaHni MaCtepHi, nepu HIX HmM MoHn 3HOBy KOpNCTyBaTHcR. BeNka KInbKicTB HeueacHX BnAdKn CnpuHReTbcr NoraHm DOrJaDM 3a eJcKTPoPnlaJaAMn.
f) Tpmaite piaalbhi iHCTpymEnT do6pe HaroctpeHNMaB uHcToTi. CtapaHHo dOrJMyTi pi3aJIbHI iHCTpymEnT 3 roCTpM piaJIbHM KpaEM MeHwe 3acTprOHTb Ta ix IeIe Becn.
g) BnHOpNCTOByIte eJeKTPoPnpIaIaI, npIaIaIdo Hnx,po6Oci IHcTpymeHTn T.i. BiIOBiIHO do uix Bka3IBox.Bepitbdo yBaRn npu cboMuy yMOBN po6OTn Ta CneUPhiIy BnHOHyBaHOI po6OTn. BnKOpNCTaHHNeJeleKTPoPnpIAIdbIra pO6iT, IraHX BOHN He nepeIbauChi, MoKe npu3BOIDTu DO He6e3neuHx cnTyaui.
h) TpmaTe pyKoTHn i NOBepxHi 3axBaTy cyXmN i HCTHMn, CIIknyIte, 06 Ha Hnx He 6yIo OINBn a6o rYcTOrO MaTnla. CIn3bKi pyKoTHn i NOBepxHi 3aXBaTy yHEMOJINBIOHtB 6e3neUHe NOBOJKeHHr 3 eJeHTpoiHCTpyMeHTOM Ta IHO RO KOHTPOIIOBAHHra B HeoichiYBaHNxCITyaIax.
5) INPABINbHE NOBOJHENHRA TAKOPNCTYBAHH EJEKTPONPHIAADAMU,IO NPAUOTb HA AkyMylrTOPHNX BATAPERX

a) 3apAHyTe anMyIaTOpHi 6aTapei IInwe B 3apAHyBaIbHnx PnCTpOx, peHOMeHDoBaHx BnROTOBIOBaUcEm. BnKOpNCTaHHra3apAHyBaIbHOrO npICPTPOI nla aKMyJIaTOpHnx 6aTapei, nla kNX BiH He nepeE6aueHm, MoKe Ipn3BODHTn Do nokHeKi.
b) BnKOpHCTOByIe B eIeHTponpHaJadax IInwe peKOMeHDoBahi aKymyJIaTOpHi 6aTaapei. BnKOpHCTaHHI INxN x aKymyJIaTOpHIX 6aTaapeM oKe npIN3BOdHTNo TpaBM Ta NoXeKi.
c) He 36epiraTe aHymyIaTOpHy 6aTaapeo, hHOIO Bn came He KopncTyecb, nopAid i3 KaHcJIepcbHMM cKpinKaHH, KIOUaMn, rBi3dAmn, rBHTaMn Ta IHsHmN HeBeHNHMM MeTaJIeBHMn ppeMeTAMn, Hki MOxHyb CnpuHHNTn NepemHaHHaKOHTaKTiB. KopOTke 3aMnKaHH mIX KOHTaHTamn aKymyIaTOpHOI 6aTaapei MoHe CnpuHHrTo ONIKn a6O nOKeHy.
d) Пи НрразиьнOMу BИнОпсТаHHI 3 aKymЛЯТОРHOI 6aTapei MoHe NOTeHTn pIDHа. YHnHaJIte HOrTaKTy 3 HeI. Пи BUNaIbObOMy KOHTaKTI nPOMnIte BiINOBiDHe MlcSe BODIO. RaHIO pIDHа NOTpanHla B OcI, DoDAtHOBO 3BepHITbcra do LiHApA. AkymЛЯTOpHa pIDHа MoHe cPnUChIaTN noJpa3HeHnA shkpN a6o onIK.
e) He BnHOpNCToBMyTe NOnHoJKeHi a6o MoNphiIObAHi aHyMylrTopu a6o eIeKtpoiHCTpyMeHTn. NOnKoJKeHi a6o MoNphiIObAHi aHyMylrTopu NOBeCTnC HEOUHyBaHO, 10 MoKe npn3BeCTn Do NoJHexKi, Bn6yXy a6o pn3nHy TpaBMn.
f) He niДаВaTe aHymyIaTOp a6o eJIeHTpoIHCTpyMeHT iI BorHIO a6O BnCOHIX TempeaTyp. BorOBb a6O TempeaTpN BuIci 3a 130^ MOKHyTb npu3BecTu Do BV6yXy.
g) BnHOHyIe Bci BHa3iBHN i3 3apJHAnHH i He 3apJHJaIte aHymyIaTOp a6o eIeHTpoIHcTpymeHT 3a Tempeatyp, 0o BHXOaTb 3a BHa3aHI B IHCTpyuHcii MeHi. HenpaBnIbHe 3apJHaHH a6o 3apJHaHH 3a Tempeatyp, 0o BHXOaTb 3a BHa3aHI MeKl, MoHe noIshKOaNTu 6aTaapeo i nIDBnIHTn pN3NK 3aIMaHH.
6) CEPBIC
a) BiДаВаite cBи npHJa Ha peMOHT nIwe KBaIiΦiKOBaHm ΦaxiBcAЯ Ta InIe 3 BHKOpNCTaHHaM opHirHaJIbHNx 3aNuaCTNH. Lc3a6e3neuTb 6e3neuHicTb npHaNy Ha doBriYac.
b) Hikoln He 06cnyroByte noxhoJHeHi anymyIaTOpn. O6cnyroByBaTH aKMyJIaTOpn Do3BOJIAETbcA LiWe BnO6HHy a6o ABTopn3OBaHm CepBicHM oprahi3auiM.

BHA3IBHNIOBE3NEUДIЯДРИБ/BNKPHTH3 AKMYJRTOPHMXINBJEHHAM

3AΓΑJIbHE

-ПИЛ BiДТанх MaTepiajIIB,ЯС CBINHQUOByTpmyIOy aфap6a,Дeяki npoDi ndepeBa,МиepaII N MeTAl, MOHe 6TyN WkIDJIINBIM (HOHTAHT i3 TAKIM NIOLO m a60 Myo BdIXaHHMO He CTATn pInuHNO BHNKHeH H B OEPaTOPa a6o oci6, lo nepe6yBaIOb T npOy, aIepriHnx peakui i/a6o pecnipaTopHx 3axBOpUBoAhb); NaIraTe pecnPipatop i npauToite 3 NNIOBuaJauOUM npucTroEm nId yBimHHeH HInCTpyMeHTa
-ДякИВидпилуКласиФИкюТСЯн KaHцeрoreHHi (HanpNKlaI,dy6OBn a60 6yKOBn nI),OC6LNoB

B cNoIyueHHI 3 do6aBkamn dI KOnduioBaHHaDepeBHN; HndraTe pecnipatop i npauoTe 3HIOBuaJIOHM npcTpoem nId Yac yBIMHeHHaIHCTpyMeHTA

CiiyTe iHCTpyiAm no po6oTI 3 MaTePiaIaMn, npOduyUOuHMN nII
He 06po6IaIe MaTepiA, IIO MiCTb ac6ecT (ac6ecTBbaHaaetbca KaHcepeoReHHM)
- PpeKoHaITeCb 6iHyHeuB BmNkau F ② B cepeHbOmy nIOJKeHHi (6IOKyBaHHa) nepeD 6yDb- RKMn HalaKaMn YU 3aMiHaMn npHaJa, ToDi KOJI N TpImaTe a60 NOKlaII INCTpyMeHT

AHCECYAPN

SKIL rapaHTye HadiHy po6Oy IHCTpymeHTa TIlbKn npn BHKOPNCtAHHi BiINOBiHOro npna
BnKOpncToBynte Inne npnaIaI, npnycTIma WbNdkicTb o6epTaHHraKOro kMIMyM BiINOBiJaE HauBnui WbNdkoCTi IHcTpymeHTa 6e3 HaBaHTaKeHHA

NEPEBVKOPNCTAHHJM

He donyckaIte noxKDgeHb, kI MoKytb HaheCTn wypynu, uBaxn iHni eJeMeHTn BaWOMy Bnp6y; BuJaJIb ix nepeD NOaTkom pOboTH
- O6ob'3KOBO nepekoHaTecb, 10 Hanpyra cTpMy BiDnOBiJa e Hanpy3i, Bka3aHi Ha fipMOBOMy wTemneI iHCTpymeHTa
3aφiKcγIe o6pO6JIoBaNHy deTalb (o6pO6JIIOBaHa DeTaJIb, 3aΦiKcOBaHa 3a DOnOMOrO 3aTnCKHnx npncTroob a6o JeuaT, 3aKpInIHOETbcra Kpaue, HIX BpyHy)
BnKOpNCTOByIte npndaTHi noWkyOBI npnaIaI nIra 3haxoJHHeHH 3axOBAHnx B6ydIbI ty6 Ta Ka6eJIb a60 3BepHITbc4 3a donomoroB MicueBe niInpnemcTBo eJeHTpo-, ra30-Ta BOJOnocTayHn (3aenJIeHH eJeKTpOnpBOdKn MOHe pIn3BOdNTdo NOKeHi Ta ydpA eJeKTpUHm CTpyMOM; 3aenJIeHHra3OBOiT Tpy6 MoKe Ipn3BODHTn Do BV6Byx; saenJIeHH BAOpPOBDoHOI Tpy6 MoKe 3aBdaTI uKOdy MaTePiaJIbHm UIHHOCTM A60 np3BOdNTn Do ydpA eJeKTpUHm CTpyMOM)

ПИД YAC BHKOPNCTAHN

• Pn po6oTax, KOH pO6OuH iNcTpymEt a60 rBHT MoHe 3aueHNTu 3axOBaHy eJeKtpoNPoBOyDky, TpMaIte eJeKtpoiHcTpymEt 3a i3OJIbOBAHi pyHOaTHN (3aueHJeHHa NPOBoDKn, UO 3HaXoDHTbcra NiHappyroIO, MOHe 3apJxMyBaTN TaKOJK I MeTaJIeBi YactHIn H eJeKtpoiHcTpymEt Ta Ipn3BOdHT Do ydApy eJeKtpuHm CTpyMOM)
• Y BnnaKHy eJeKtpnHoi QI MEXaHiHOI HecnpaBHOCTI HeaHIO BmHKHiTb IHcTpMeHT a60 BiDJIIOUcITb 3apAHDNI npCtpiB iD eJeKtpociti

3APRAHHAHAHAHYTATOP

-ДiTЯМВIHOMBID8pOKIB TaOCO6am3OBMeJKeHIMN φi3nUHMN,CEHCOPHIMNaT aP03yMOBIMMOJIINBOCTaMn a6o HeIOCTaTHIMDOCBiDOM Ta 3HaHHaMMN DO3BOJAEbCn KOpNCYBaTnCSaN M3apAHNm pIncTpOeem IInsePiHaIaDM a6o RaHsq BOHn OTPMaJIH

BIDNOBIDHIBKa3iBKnIooD 6e3neuHOro BnKOpNCTaHHa 2b0rO 3apArdHOro npncTpoHO i po3ymiOtB,ky He6e3neHy BIn Hece (B IHOMy BnPaAdKy MOxJIVe HEnpaBnIbHe BnKOpNCTaHHa Ta He6e3peKa OdePkaHHa TpaBM)

-ДиВITbCЯ3aДITbMn（iTn He NOBHHI rpaTnCЯ 3ЗapArdHm npncTpOeM)
-ДITЯМДОЗВОЛЯЕТБСАОчицатиЗapяднйприст piТа ВИКонуВату НOrо ТхниЧeобсclуroyываньлше пдНагладOM
BnKOpNCToByIteIaIyOIOInCTpyMeNTaTilbKn 3apAHNipncTpIe SKIL2610Z08495 a6o2610Z08496 Ta aKymyIaTOp SKIL 2610Z08494
3apdKaTe akyMyJTop TiIbKn 3apdHnM npucTpoEm, KHM KOMNJIeKTyEcBcA IHCTpyMeHT
He TopKaHTeCb KIeM 3apAHO npNCtPO
He niBepraTe iHcTpymeHT/3apAHN npncTpii/ aKymyIaTOP dIoU
He 3apJkaIte aKymyIaTOp y BOIorHX abO BORHX npMiuEHHx
He BnKOpncTOByyTe noxkoJKeHi 3apAHH npncTpii -BidHecitb IX do ceptnphiKOBaHOr SKIL cepBicHOr OeHTpy dIra 6e3neuHoi NOHHK
He BnKOpncToBnyTe 3apAaHm npucTpii KOIN NOsKOJKeHi dpIT a6o BnIHa; BOHN MaOTb 6yTN HeaHOn 3amHehi B SKIL cepBic ueHTpi
He BnKOpNCToBMyTe NOxKOJaKeHn aKymyJATOP; HeraHbIeJEdHaHTe NOro BiD iHCTpyMeHTa
He po3bpaTe akyMylrTop uN 3apAHN npncTpiI camOCTiHO
He HamaraTecb 3apJkaTH aKymJIaTOPn, 1o He nIiJaTIOb NOBTOPiH 3apJdci, 3apJHIM pNCTpOEM do cboI IHCTpyMeHTa
-ДоЗвoleHa Temпература Довкіля (iHCTpyMeHT/3apdHnnpncTpri/AkymyJIrTOp):
-ПдчacЗарджсенг0...+45°C
-Пдчacpo6OTN -20...+50°C
-Пдчac36epirahн8 -20...+50°C

IORCHEHHA DO yMOBHNX NO3HAUHb HA IHCTPYMEHTI/3APADHOMY PNPCTPOI/AKUMJARTOPI

③Перд ВИКОРИСТАHHМ npOHnTaITe iHCTpyKciIO i3 3aTocyBaHH
④ BnKOpNCToBvTe 3apRdHn npncTpii TiIbKn y npmiueHHi
⑤ПодбиHa i3oJaIg（3a3eMIOUOHy npOBiHne nToPi6eH)
⑥ Пи влuyehhi y BOROH b6aTapei Bn6yxaIOTB, TOMY B JHOdHOMy pa3i He cnaIIOte 6aTapei
⑦ 36epiraTe iHCTpyMeHT/3apRdHn npncTpi/ aKymyIaTOP npi TeMnepaTypi He 6ilbui 50^
8 He BnHJaTe eIeHTpOIHcTpymEnT Ta 6aTapei pa3om 3i 3BnHaHm CmTTAM

BANKOPHCTAHHR

HOM6IHOBAHN NepemHKaY DnB MKNKaHHBMMKHaHH Ta KepyBaHHo 0eptamA ② IJIaBHO Kepye OeepTaMn BiH NyIa MoHCmMaJIbHNX B 3aJIeHHOCTi BiD CnJIN HATNCKaHH Ha nepemHKaY

• 3apdkaHHaKymyIaTopa ⑨

INBIMaMeTe aHymyIaTOp 3 iNCTpyMeNTa
-πiδεηHaTe 3apdHn npicTpio Do dHepeNa HINBLeHHRAK NOKa3aHO Ha MaIIOHky a
-3aropntbc3eIeHa lamnoKa B, ykaoyuHa Te, 03apnHnn pncptpi E rTOBn do po6oTu a
-BCTaBTe 6aTapeo Do 3apAnHO npncToIO, RA NOKa3aHO Ha iIOCTpaui (9)b
-3aropntbca YepBOHa IamnoHc C, yha3youHn Ha Te, 0aKymyIaTOp 3apndKaetbcra
- npn6n3no uepe3 3 roDHH (2610Z08495) / 5 roDHH (2610Z08496) anymyIaTOp 6ye neOBHicTIO 3apJxHeo i 3eJeHn iNDKATop B 3aropaeTbcra d !BID'edHaIte anymyIaTOp Bd 3apJHOrO npncTpO nicna 3aHueHHNepiody 3apJxHaHH, ce noobHNb TepMin po6ooi eHcNlyatauii anymyIaTopa

BAHJIINBO:

-RAKIO YepBOHa IaMnOuKa C He 3aRopntbcra nicra BCTaBHeHn6aTapei, ce MoKe O3HaHTn 10 aHyMyIaTOp 3aHaTTo XoNoDnH a6o 3aHaTTo rapHn (3apAHH npCtpiMoKe npaObAtn TlbKn 3a Tempeatpyn aKyMyIaTopa BiD 0^ do 45^)
-litii-ioHHy 6bTaapeIO MOKHa 3apJHaTn 6yDb-KoJI (pepepHbaHH npocecy 3apJKaHH He noiKoJHyE 6bTaapeIO)
-ЛITIEBO-IOHHN aKymJrTOp He O6OB'3HOBO NOBHCIOPO3PraHnpeep 3apRdHaHHaM(B HbOMy BiCyTHIN"eFekT nAm'rTI", kHn npoRbJIeTbcry HiKeJIeBOKaDMIEBHX aKymJrTOpax)
-πiDac 3apJxHn，3apHn npntpi Ta aKymyIaTOp MOKyb CTaN TeNIMn Ha DoTNK; ue HopMaIbHo I He CBIDHTb IpO BUNHKHeHHr HecnpaBHOCTe npHaLy
-NepeKoHaITeScb, 0a aKymyIaTOp YHTcN Ta cyxHnpeed TmM NK nDHaTN NOrO Do 3apAHO npictpo
-He BID'eHnyTe aKymyIaTOp NiI Yac po6oTI nICTpyMeNTa
-RAHIO Bn He 6yTeKOpNCTyBaTncb IHCTpyMeHTOM DOBmYac,TO BiD'EdHaNe 3apAHyn npNCptiB iD JHepeNa eIeKtpoEneprii
-ICTpymEnT aBOMaTHUHO BIMNKaETbCRA, KOJIIJIIOHHa 6aTapei NOBHiCTH Oo3pRdKeHa
-3HaUHO 3MeHSeHH Yac pO6To nicIaPdKaHH Bka3ye Ha Te, 0o 6aTapee 3HoWeHa i Notpe6yE 3amHn

• 3MiHa HanpMy o6epTaHHH 10
• npn HnoBni yCTaHOUsI NOIOKeHHA IIB/npaB nycOBn BnHIOuHaTeIb A ② He npaioe !mHnte Hanpam o6epTaHH TILbKn npn NobHi 3ynnuci iNcTpymenta
• 3amHa HacaIOK ⑪
  ！He BnHOpNCTOByTe HacaDN 3 NOxHOJHeHN CTOB6ypom
• PeryIIOBaHHa MOMeHTy o6epTaHHa (VaniTorque) ⑫ -BnXiIHNI MOMeHT o6epTaHHa 6yde 3pocTaH, RaIO KpyTHTN Kynauok D BiD 1do 19; noLoKeHHa E

3a6IOKye KyaOH, 0o Do3BOJNTb CBePdNTH a60 Tyro 3aRbHNyBaTN

-KOJIIN BRBHNyTe cAmOpIcNoaTky cnpo6yIte nepuJy N03nIIO VARITorque 1,NotIM NoHHaIe HapooYBaTHN, NOKI Notpi6Ha rInbHbA BkpyUBAHH He 6yde DOcRHyTa

MexahiHne nepemHKaHHaBnKoCTi (2832)

-MexaHnueh peyKTop ⑬(2832)

-IOCTaBeTe IpeBKnUoyBaTeJG Ha JeHaHaTa ckOpOCT！3aJeNcTBaIte IpeBKnUoyBaTeJra npedabKnTe, KOrato HnctpyMeHTbT pa60TH 6aBHOOW

-HNCKA CHOPOCT

-TOJAM B'bpTAA, MOMENT

-KaTo OTBepTka 3a npo6nBaHe Ha rOleMn DnaMeTpN

-3a Hapra3BaHe Ha pe36aHIGH

-BVCOKA CHOPOCT

-NO-MaJIbK BbPTRAI, MOMENT

-3a npobuBaHe Ha MaIkn DnAmEtprn

• 3auneta Ha 6aTeepnra

N3KJIIOUBA INHCTpymeHTa NIN He N03BOJRA BKJIIOUBAHe HA INHCTpymeHTa, KORATO

-HaTobapBaHeTo e npeKaJIeHO TOnJaMO

-Temnepaotypata Ha 6aTepeyrae n3BbH dOnyucTmna pa6oTeH TemnepaTypeen Dnana30n OT-20 do +50^

-JIHTNEBO-IOHHaTa 6aTePn e NOOTn H3TOUeHa (3a 3aunTa cpeu ybJ60k pa3pnd)

Icneq aBtOMaTHHOTo N3KJIIOUyBaHe Ha HHCTpyMeHTa He IpoObJIHaBaYte Da HATNCHaTe CnycbHa, NOHeXe MOHe Da ce NOBpeHn ahMyJlAToPbT

• PpOKeKTop H 14

PpOHeKToptH CBeTba aBtOMaTHUHO, KOraTO ce 3aJeIcTBa KJIIOuA ②

-ДьржанHaCoOуBaHЯИHCTpyMeHTa 15

!no Bpeme Ha pa6oTa, BnHaRn DpbHKe YpeDa 3a ouBeTeHaTAte) B CnBO 3OHa(II) 3a XBaUaHe

-OCTabaTe BEHTnlaUHnHTe OTbOpn J② HEnokpntu -He npIraTte TBbpDe rOJMa HAtnck Bbpxy

eNEKTPoHnCTpyMeHTa; HeKa ToJ Da CBbpun pa6oTaTa BmecTOBAC

YKA3AHN3A PABOTA

• N3noJ3BaIte noxDoxoJn 6nt
  In3noJ3BaIte cAmO ocTpN 6HT
• Ppi npo6nBaHe Ha CBETHm MeTaJIH
  -ako BV Tp6Ba roJAM OTBOP, pIbPBO npo6nTe MaJIbK -OT BpeMe Ha BpeMe Cma3BaIe CBpeJaTa C MaUNHHO MacJIO
  -ПинЗаванHa BnHT B 6IIN3OCTdo p6baHa nIbPBeH DeTaII nbPBO np6bIte OTBOp,3a Da nI36eHete OTKbpTBAHe Ha IbpBOTO
  3a ONTImaHa pa60Ta Ha eNeKTpOnHcTpymeHTa e Heo6XoDnM NOCTOReH HATNcK Bbpxy BnHTa, BHJIOUHTeJIHO pnp pa3BnuBaHe
  -ПиЗавиBaHHe Na BInTOBeВ TBbPDoДbPBO ПbpBO npO6nTe OTBOP
• PpO6nBaHe B DbPBO 6e3 OTKbPTBaHe Ha pB6yTe ⑰
  -Be3npaxoBO np6nBaHe BCTeHn 18
  -ПрбиBaHe Ha KepaMHn ПLOHn 6e3 ПьзraHc CBpeINoTo 19
• 3a noBeepe noJIe3Hn yKa3aHnB. www.skil.com

IODAPbXHa/CEPBn3

To3n HNCTpymEnHe e npedHa3HaueH 3a npocecnoHaHa ynoTpe6a
- PoiIbprkaIte eIeKTpOIHCTpyMeHTa 3apHOTO yctpoiCTBO YIcTNI

-NOUCTeTe KOHTaKTtHe Ha 3apAaHOTo ycTPOIcTBO C aIKOXOI INI INpeNapaT 3a NOUCTBaHe Ha KOHTaKTn!InpeDNIOuHCTBaHe H3HIOUeTe 3apAHOTo ycTPOIcTBO OTO 3axpaHbauata MpeHa

AHO BbPnEHN Pneu3HOTnpoN3BOcTBO HBNMaTeJHO 3nNTBaHe Bb3HnKHe NOBpea, INCHTpymeHTa/ 3aprHTo yCtPOiCTBO Da ce 3aHece 3a peMOHT B OTopn3napan cepBn3 3a eJeKtpOnHcTpymeHTn Ha SKIL

-3aHecTe INHCTpyMeHTa IINI 3apAHOTo yCTPOIcTBO B Hepa3rlo6eB BVd 3aeDHO C DOKa3aTEJIcTBO 3a IOKyNkata My B TbprOBCKnI O6eHT, OTKbDeTO CTe rO 3aKyniIN, INI B NaH-6JIn3KNr cepBn3 Ha SKIL (adpcnte, KaHTo n CXemTa 3a cepBn3HO o6CnyXBaHe Ha eJeKTPoINHCTpyMeHTa, MOHete da Hamepnte Ha aDpec www.skil.com)
-B CnyaHa DeeEHTHO 3apAHO yCTPOIcTBO n3npaTeHaKHO 3apAHO TO yCTPOIcTBO,Taha n6aTePnraHa Baunr nnbprnn OToPn3npaHnrcpBn3 Ha SKIL

ОПАЗВАЕ HA OKOLHATA CРEDA

He n3xbpIte eIeHTpoyeIte,6aTePnnpncnoc6JIeHnraTnOnaKOBKeIte 3aEEDHO C 6ntobnOTnaDbu (cAmO 3a cTpaHn ot EC)

-cb6pa3Ho DnpeKTHBaTa Ha EC 2012/19/EG OTHOCHO3HOCEH N eEeKTPnueckn H eEeKtpoHHu ypeH NOTpa3RAHeTo B HauNoHaJIHOTo 3aKHOdaTeJICTBO H3HOceHHTe eEeKTPoYpeDN CJeDBA da Ce cB6npaT OTdEnHO I Da ce npedaBt 3a peuKnIpaHe Cnpope H3NCKBAHNrTa 3a ONa3BaHe Ha OKJHaTa CpeDa
-3a TOBA yKa3Ba CnMBOJbT ⑧ TORaba KOraTO Tp6Ba Da 6bDat yHnOKeHH

Inpei Da n3XBpInte 6aTePnIra, 3auNTeTe n3BODnte i c de6eIa IeneHka, 3a da Hama ONaCHOCT OT Bb3HNKBaHe Ha KbcO CbeINHeHne

UYM/BNBPACIN

-ИзмеренВсбOTBEТСВЕcEN60745HHBOTOHa 3ByKOBO HaJIraHHe HaTO3N HNCTpyMeHTe76(1008& 2830)/<70（2832）dB(A)aHbOTOHa3ByKOBaMOUHOCT e87(1008&2830)dB(A)(CTaHdAPTHOOTKIOHHe:3 dB),aBn6paunTe ca < 2,5M /c^2 (BeKToPHaTaCyMa nO TpIte HAnpaBHeH; HeOppeJeHocT K=1,5M/c²)
HIBOTO Ha npedeaeneHTe Bn6paun e n3mpeHo B CbOTBeTCTBne cbc TAndapTN3npaHnre TcT, ONpeJeHe H EN 60745; To moKe da ce n3noJ3Ba 3a cpaBHeHne Ha eHN INHCTpyMeHc Dpyr N KaTO ppeBapNTeHa OueHka Ha NODlaRaHETo Ha BN6paun npn n3NoJ3BaHeTo Ha INHCTpyMeHt a NoCOUeHte PpNIOKeHHa

-ⅢNOL3BaHeTo Ha HhCTpyMeHtTa 3a pa3JIuHn OT Te3n PpIIOJKeHn IIN C DpyrN, IIN LOIO NOIDbPjKaHN aKceCoApn MOKe 3HaHTeJIHO da NOBNI HNBOTO Ha KOEt CTe NIOLOKeHn
-ηπeHODIte OT BpeMe, KOraTO HnCTpyMeHTa e N3KHOueH NII CbOTBETHO BHLIOueH, HO C HrO He Ce pa60Tu B MOMeHTa MORat 3HaunTeJIHO Da HamaJIAT HNBOTO Ha KOETo CTe NOJIOKeHN

!InpeNa3BaIte ce ot efeHTnte OT Bn6paunnte, KaTO NOdIbPHaTe HHCTpyMeHtA n AHCceCoapnte My, Na3nte PbueTe cN TOJI N OprAHn3npaTe BaIHTe MoJEN Ha pa6Ota

SK

APKALPOŠANA / APKOPE

• Sis darbariks nav paredzets profesionai lietosanai
  Uzturiet tiru instrumentu un uzlades ierici

• notiriet uzlades icerices kontaktspailes ar spirtu viali

• specialokontaktu tirišanas lidzekli -!pirms uzlades icerices tirišanas atvienojiet to nerektrotikla

Ja, neraugoties uz augsto izgatavošanas kvalati un rupigo pecražošanas parbaudi, instruments vai uzlades ierie tomér sabojajas, tas janogada remontam firmas SKIL pilnvarota elektroinstrumentu remonta darbnica

• nogadajiet instrumentu vai uzlades ierici neizjaukta
  veida kopā ar iegades dokumentiem tuvakajā
  tirdzniecibas vieta vai firmas SKIL pilvarotā
  peciegades apkalposanas un remonta iestāde
  (adreses un instrumenta apkalposanas shema ir
  sniegta interneta vietne www.skil.com)
  defektiva lidetaja gadijumā nosutiet gan lidetaju, gan akumulatoru savam izplatitajam vai SKIL apkopes centram

APKÄRTEJAS VIDES AIZSARDZIBA

• Neizmetiet elektroiekartas, baterijas, piederumus un iesainojuma materialus sadzives atkritumos (tikai ES valstim)

TECHNINIAI DUOMENYS ①

• PoinheHe Ha aKymyIaTopcKa 6aTepeJa 9

I3BaTe je 6aTepejata OJ MaunHaTa

-ПОЛнанOT npиклучete Ro Ha Мржен HANOн KaKo Ha nIyctpaunjata 9a
Ke ce 3anann 3eHeta lamnueka B noKaKybajkn deKa noHaOT e noIrotBeH 3a pa60Ta9a
-6atepnjata CTabeTe ja BO NOJHaOT KaKo Ha NlycTpaunjata 9b
-UPBHeHata lamnUHa C ce naHkoja nokaKyBa deKa 6aTepnjata ce noHN
- no okony 3 yaca (2610Z08495) / 5 yaca (2610Z08496)

6aTepejatae eIenocho HanoJIHeTa n 3eJIeHaTa CBETnka B ce BknyyBa 9d

IOTHANO 6aTepujata Ke ce HanoJn Tpe6a da ce H3BaAn Od nonHaOT, co wTo ce npOdoJyBa BeKoT ha TpaeHe Ha 6aTepujata

BAHKHO:

-ako qpBeHaTa JAMnUkA C He ce naHn OTKaHO Ke Ce BMeTHe 6aTePnJaTAtoA 3Haun DeKa 6aTePnJaTae npeMHOry CTydeHa HnnpemHory BpeLa (noHaOT noHNcMo 6aTePnKora HnBHaTa TempePaTypa e Mery 0^ C n 45^ C

-JIITNym-jOHcKaTa 6aTepejata MoKe Da ce NOLHn BO KOe 6nIO BpeMe (PpeKHyBaHeTo Ha npOecOT Ha NOLHeBe He ja OwtetyBa 6aTepejata)
-JIHTNym-JOHCKaTa 6aTePnJa He Mopa Da 6nKe npa3Ha npei Da ce NoHn (Hema ,eΦeHT Bp3 DOJIroTpaJHoCTa, KaKo Kaj HKeJI-KaDMnMycMChNe 6aTePn)
-ПИ ПОЛНЕБЕ ПОЛHAЧOT И 6aTeРиJAТСЕ 3aRpeBaAT; TOA e HOPMaJIHо И He npeTCTaByBa HnKaHOB npo6JIeM
-HaBOpEshHnTe NOBpHnHn Ha 6aTepnjata Tpe6a da 6nDat cyBuN uNCTn, PpeD da ce cTaBn 6aTepnjata BO nOJHaOH
-6aTepejuata He Cmee da Ce BaDN BO TEKOT Ha pa6oTaTHa anapaTOT
-ДOKOLky He ro KopncTe Te ypeDoT NOdoIro BpeMe, N3BleYeTe Ro MpeJHnOT npHKlyuOK Ha NOJHaOT Od npHKLyuHnUcaTa
-anaTOT CE NCKJnyyBa ABTOMATCHKORA Ke CE NCnpa3HN JNTnym-JOHcKaTa 6aTepeNja
-3HaunTeHn HamaJeHnO npno Ha pa6oTa no NOHeBTo NoocUyBa DeKa 6aTepujata e cTapa N Tpe6a da ce 3ameHn

• PpomeHa Ha hacoKaTa Ha potaunja 10

-ako leBaTa/decHaTnO3nJHa He IerHaT KaHO wTO Tpe6a, npeHHyBaOH A ② Hema Da MoHe da CTapTyBa!MeHyBajTe ja HacOHata Ha potaunjata camo hora aIaTOT ce Haora BO ueNoCHo MnpyBaHbe

• PpomeHa ha byprnnte 11

!He ynoTppe6ybaTe 6bprnnc o owTeHa dpka

• KoHTpoJa Ha BpTeKHHOT MOMENT (VariTorque) 12

-и3JIe3HnOT 6bPT Ke ce 3roJeMyBa aKo npCTeHOT Ha aHTNbATOpOT D ce BpTN oD 1 KOH 19; no3nJjata E Ke FO 3aHlyu aHTNbATOpOT 3a da ce OBO3MOHN dUnpeHe nn H3BpUyBaHBe TeuKn pa60Tu
- npn 3aBpyBaHbe Ha Hekoja 3aBpTka HajnpBO 3anOuHeTe co noLoX6bata 1(VariTorque) n noToa nolke 3roJeMyBajTe Do DocTHHyBaHe Ha cKaHaTa dla6oHHa

• N360bHaMaexaHnK3aIyHeNk ⑬ (2832)

-NoodeceTe ro npkeHHyBaOT G Ha Do3BoJeHaTa 6p3nHa!Bhnyte Ro n36OpOT Ha 6p3Hn DoEHa aIaT0 pa60tn 6abHo

LOW

-NOHncka 6p3nHa
-TOJEM MOMENT HA BpTeHe
-3a 3aBpTyBaHbe N dyuHHe Ha OTBOpN CO rOJIem DnJaMeTap
-3a Bn6paunckn HaBoj

HIGH

-ПОВИСКОКА 6рзИнэ
-HN3OK BPTINMB MOMENT
-3a DnyuHBe OTBOPn Co MaJ DnJaMaTeAp

3awtntaHa6atepnjata

NcknyBa MaunHaTa Nn CnpeyBa MaunHaTa da ce Bknyu, Kora

-ONTOBAPyBaHbeTo e npereOJeMo BvCoHa
-TemnepaTpaHa 6aTepujata He e BO O3BOJeHNOONcer 3a TemnepaTpyoD-20do +50^ C
-JIHTyM-JOHCKATA 6aTePnja e cHOpo npa3Ha (3a da ja 3aHTTN oD ueLoCHO npa3Hehe)

He npoDOnHyBaJTe da npHTnCHaTe Ha npeKnHyBaOTo 3a BkNpyBaHBe/ncNpyBaHc OTHaHO aIaNtOT He ce NCHyH aBTOMaTcH; 6aTepnjata He ce OWTeH

CBeTJHO H 14 CBeTNkata H ce BkJIyUyBa aBtOMaTcKn KOra Ke ro aHTNBpuTe npeKNHyBaOT A ②
-ДржeheиHacoCyBaHbeHa aIaTOT 15！doena pa6OTnTe,ceHorawdpKeTe ro aIaTOT 3a MeCTOTO (MeCTATA) Hoe (HON) ce O3HaueHN Co cNbA 6oja -OTBOpHTe 3aJaedeHe J②dpKeTe rN OTBOpeHN -He npITnCKajTe npemHory co aIaTOT;do3BOJeTe ToJ cam da pa6Otn

COBETN3A INPIMEHA

• KopncTeTe COoDBETHn 6yprn 16!ynotpe6ybajte cmo octpn 6yprn
  -Придунчehbe BO MeTal -HajnpBO ИЗdUnyTe NOMaJa DUnHa, KOra caKaTe Da ИЗdUnYnTe NOrOJIeMa DUnHa -БурriJaTa NOДMaChyBajTe ja co MacNo OJ BpeMe Ha ВpeMe
• PnHABpTyBaHBe Ha TpaΦOBITE Ha KpaEBITe Ha dpBOTO, npBO Tpe6a Da ce N3dyuyn MaJa DyNk 3a Da ce N36erHe pa3JIncTyBaHBe Ha dpBOTO
  3a onTImaJIHa yNtpe6a Ha anapaTOT nTope6eH e NocTojaH npHTuCOK Ha 3aBpTKaTa, OcO6eHO BO TEKOT Ha ODByBaHbETo
• Pn 3aBpTyBaHBe Ha 3aBpTkata BO TbpDnBO npTeXoJHo Tpe6a Da ce N3dynuyn Dynka
• DnyuHeHa npBo 6e3 pa3nncTyBaHe 17
• DnyuHe He Ha npBO 6e3 npaunHa
• DnyuheHe Ha NIOUckn 6e3 JIN3raBe 19
  Mhory dpyrncobetn mokeTe da HajdeTe Ha www.skil.com

OДРЖУBAHБE/CEPBNUCHPAHbE

• Oboj aIaT He e HameHet 3a npofoecnoHaHa ynoTppe6a
• Cekoraaw OdpKByajTe ro YnCT anapaTOn nNoHaCy -NCnCTeTe rN KOHTaKTtHe Ha NoHaOT nHn Co aIKOXoI nn Co YnCTaTc 3a KOHTaKTn !InpeD YnCTeBeTo Ha NoHaOT Tpe6a Da ce H3BLeue HerOBnT MpeHn PpNHlyuOH
• DOKOLKY anatOT/NOJHaOT n NOKpaj BHNMaTeHOTO pa6oTeHe n KOHTpOJa HeKOraW OTKaHe, NonpaBkata Mopa da ja n3BpUn HeKoj OblaCTeH SKIL cepBnC 3a eJIeKTPnHn anatN

IcnpaTeTe ro aJatOT nIN NOHaOT HepacHlonen, 3aeDHO CO CmETKONOTBpdaT, DO BAHNOT IpOdaBaHn Haj6nCnOT SKIL cepBnc (aDpeCNTe ce HaBeDeHn Ha www.skil.com)
- aKo noJhaOT ce pacnne, nCnpaTeTe rN NOJHaOT N 6atepnjata Ha 3actanHHKOT INI BO cepBnC Ha SKIL

3AHTNTA HA JHBOTHATA CPEINHA

He ce ocno6odybajte od eIeHTnHn aIaN, 6aTeepn, ypeH nHn am6aIaHa npEky HNBHO pPnaBe BO DOMAuHTo rY6pe (cAmO 3a 3emjnte Ha EY)

-cnopeEbpocnKaTa DnpeKtnBa 2012/19/EC 3a ocNo6OyBaHe oJ eNeKtpnHa n eNeKtpoHcKa onpema HneJHa HmIleMeHTaunJa BO cOrlaChOC T CO HaOnHaJIHnTe 3aKOH, eNeKtpnHnTe aJAtN KO

TO DOCTHHaIe KpaJOT Ha CBOJOT JKNBOTeH BEK Mopa Da 6nDat CObpaHn NocE6Ho N Da 6nDat BpATEH BO COOdBETeH Objekt 3a peuNKInpaHe
-CHM60JOT ⑧ Ke Be NOTcETyBa Ha Oba Kora Ke Dojde Bpeme aIaTOT da ro φpJInte

Inpe da ce pfnn anymylatopchata 6atepnja BO OTnad,3aWTNTTE rH HeJ3HHTe NOOBN

БУАВА / ВИБРАЦИN

• Mepeno BO corlaacnoCT co EN 60745 HNBOTo Ha 3ByeH npntncok e 76 (1008 & 2830) / <70 (2832) dB(A) a HNBOTo Ha 3BvHa MOKHOCT 87 (1008 & 2830) dB(A) (ctaHdapnHO OTcTaNyBaHe: 3 dB), n Bn6paunja < 2,5M/ c^2 (BeNTOPCN 36np Ha Tpnte NOKa3aTei; HecnryphocT K = 1.5 M / c²)
  HnBoto Ha emtnupaHe Ha Bn6paunu Koe e HabeedeHo Ha 3aAnHnot DeJ HA OBA yNaTCTBO e N3MepeHO BO corlaacnoct co cTaHdapmN3npaHNO Tect JaDeH BO EN 60745; MoKe da ce KopncTu 3a Da ce cnopeDu eJeH aIat Co npyr, I KaKo npBnUHa OceHka 3a N3LoKeHocTa Ha Bn6paunu Kora ce KopncTu aIaTOT 3a CnOmeHaTHTe npimEni

-KopnCTeHbTo Ha aIaTOT 3a pa3HN npImMeHN, INIc Opa3JIuHNI INI HEnpaBUNHO CyBaHN DeIOBN, MOKe Da IOBeDe DO 3HaJauHO 3rOJeMyBaHe Ha HNBOTO Ha N3LOXHeHOCT
-KORA aIaTOT e NCKlyueH HIN KORA aIaTOT e BKNyueH HO He BpHn HeKaBa pa6ToA, MoKe Da DoJde Do 3HaHTeJIHO HaMaIyBaHe HA HIBOTO a H3NoKHeOCT

!3aHTTeCe oD efeHTHe Ha Bn6paunTe npEny OdpHcyBaBe Ha aIaNToN HerOBnTe DeIOBn, ODPHyBaBe Ha TOnJIHHaTa BO BaUnTe paue, n OprAHn3HpAbe Ha BaWata pa6ota

AL

Trapano/vidator 1008/2830/2832 me bateri

HYRJE

Kjo vegel ehte projektuar per shpim n dru, metal, ceramike dhe plastike; veglat me kontroll automatik te shpejtesei dhe rrotullim majtas/djathas jan po astu t pershtatshme per vidhosje dhe prerje me filetim
Kjo vegel nuk ehte projektuar per perdorim profesonal
- Lexoni dhe ruani kete manual te perdorimit ③

TÉDHÉNAT TEKNIKE ①

Forca maksimale errotullimit per veprime vidhosjeje teforta sipas ISO 5393:41Nm (1008 & 2830)]/54Nm (2832)

ELEMENTETVEGEL ②

A Celesi per ndeze/fikje dhe kontrli i shpejtesise
B Drita jeshile e karikimit
C Drita e kuqe e karikimit
D Unaza per kontroll e force s rrotullimit
E Pozizioni i bllokimit (freksioni)
F Celesi per ndryshimin e drejtimit ose t rrotullimit

G Zgjedhja e marsheve (2832)
H Drita ndriquese
J Te carateajrosjes
K Karikuesi

SIGURIA

PARALAJMERIME TEPERGJITHSHME TESIGURISE PPER PAJISJET ELEKTRIKE

PARALAJMERIM Lexoni te gjitha paralajmerimet e sigurise, udhezimet, ilustrimet dhe specifikimet e paraqitura me kete vegel pune. Mosrespektimi i te gjitha udhezimeve te renditurme poshte mund te rezultojne goditje elektrike, zjarr dhe/ose demtime te renda. Ruani te gjitha paralajmerimet dhe udhezimet per reference ne tê ardhmen. Termi "pajisje elektrike" ne paralajmerime i referohet pajisjes elektrike qe perdoret nga przy (me kabllo) ose pajisjes elektrike me bateri (pa kabllo).

1) SIGURIA E ZONÉS SE PUNÉS

2) SIGURIA ELEKTRIKE

Lg 1 g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0g0

1 1

L

jL 10 jagol/s/1g jgs jss

H L

gA 1

10

1

1 4g5

gss ggsgdsgdsgdsgdsgdsgdsgdsgds

com.skil.www

j0000000000000000000000000000000000000

JLWJLS

iwwj b

gLdLjLajdsJ,1Lgijgai gajgJ.LgjLg

( L,q) = d( 3,1) guae sd0g0 quang qiao Jia zai) ci si li gao jilu

≤g≤g gjgjgjLgjEC/19/1f

44444444444444444444444444444444444444444444444444444444444444

j50 4g000000000000000000000000000000000000000000

JLJIaJIwJ LjLgJw gWtio JlJ

aai jai jai gai aai iiaai gai

1 1

Laii Li

1

sijgni jyj

15g jgl 2j 1000

( 1,2,3,4,5) ( 8,9)

- < 0

a

g j 5j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j

- 12 < 3 < 0.

100 100

a

-0000000

-

2.5 jogc lj 12 g o000g jil

①

A 1

aegi 1s jzj 45 a s jg c jzj jzj g jieo

JolS

1

iis oaiw jj aui wuoi

VariTorque) jglss

1g 101111111

g SKIL 17. Z-A291 L 17. Z-A290 JLJI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JI JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJjj JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ

aagg aaiyaaaii yaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyai

aJ 1000000000000000000000000000000000000000000000000000000000000000

J 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j 1 j

FA

g 1s21 J 100000000000000000000000000000000000000

ailljoo jolil

LbJ1

abwgljbnl llo pdsn 5
Ia Ig Gg Log A nn no Jla b81
g aiaia iag aai gai aiai
2g gai gai gai gai gai
gucic gai ygi gai gai gai
gaiygi gai ygi gai gai
gaiygi gai ygi gai ygi
gaiygi gai ygi gai ygi
gaiygi gai ygi gai ygi
gaiygi gai ygi gai ygi
gaiygi gai ygi gai ygi
gaiygi gai ygi gai ygi
gaiygi gai ygi gai ygi
gaiygi gai ygi gai ygi

（）LJLLJb21pLgC 1gJJJLjIa81pga21 2g 1gBjLbJlncLgPcui

SKIL Lbdojog f11. Z-A91g f11. Z-A90 SKIL yLw paas

a1a2 + a1a3 = 0

121 202y jLJU 21 aJU

LJI 8gI I J001

JLIOU 11/0011/01582

aIoo g aIoo aIoo aIoo aIoo aIoo

SKIL 2000

JALI JAAJI 1

gJLLJJIaIwJ 1111 JgJLLJJLJLJLJX

Lgaww alwl SKIL aos cdoa oao 0o gagal

yall lclglll:allll caii 8

a a a a a a a a a a a a a a a a a a a

J 1

(2) · = 14 ( 2) ^2 - ( 2) ^2

J 1 J 1 J 1 J 1 J 1 J 1 J 1

j 1

j 10000000000000000000000000000000000000000000

jss jss gglgaggagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagagag

A

(2)

Jg 1

(2) a1 + a2 + a_3 = 10

a jaa w) Jla81 1c aJra81

gai jie 1j 1j

gbsbbsbgsaill aai jll glll jllj

.

(1) = , =

iIa

jLJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJ

Iaa Juaaieill aou1 gssjogiaeaal 5jwJaeer cJbJI

LlIyIyIyIyIyIyIyIyIyIyIy

Iolc Logleo

L

a 100000000000000000000000000000000000000000000000

jglg jol g/og oolw1o1g 0g

Koi Uo Juaa Jaae plaaa Jao gJiau Glaa

j,jaiyoo aiee gaii

a: 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a 1 a

JUU JUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu uu

S OBC = S COD + S_ BOC

·oLo

( d + b) + a = 0

1 1

101111111

1

.

：Jg0g 1

p

g 1

JooJI Joo Jooog 1oJooji jill aeball

aalb1 pa8x1 aagj Ic Lg! JLiulI Lgai j 10X1 aJge j Jo Liis

L

·

(1) l2 : y = - 43x + 5 C2^1 y = - 43x + 5

·山

Jg 1

jai gai jai jai li bai li gai aai gai

（a1y5 a00g lLlal

puiuuiuiuiuiui

aLac scljI Jc. Agljell aai lall gabw 100