C4431 - Watch Candino - Free user manual and instructions

Technical Features	Details
Movement Type	Quartz movement
Case Material	Stainless steel
Case Diameter	40 mm
Glass	Mineral glass
Water Resistance	30 meters
Functions	Hour, minute, second
Strap	Leather
Dial Color	Black
Usage	Everyday watch, elegant
Maintenance	Battery replacement every 2-3 years
Safety	Do not expose to strong shocks
General Information	2-year warranty

Frequently Asked Questions - C4431 Candino

How do I set the time on the Candino C4431 watch?

To set the time, pull the watch crown out to the second position. Turn the crown clockwise or counterclockwise to adjust the time. Once the time is set, push the crown back in place.

Is the Candino C4431 watch waterproof?

Yes, the Candino C4431 watch is water resistant up to 50 meters. This means it can withstand splashes and light swimming, but it is advised not to use it for diving.

How do I change the battery of the Candino C4431 watch?

To change the battery, it is recommended to entrust the watch to a professional. Opening the case yourself can damage the watch and void the warranty.

What should I do if the watch is not working?

If the watch is not working, first check if the battery is dead. If the battery is new and the watch still does not work, contact a watchmaker for a diagnosis.

How do I clean the Candino C4431 watch?

To clean the watch, use a soft, dry cloth. Avoid harsh chemicals. If the watch is very dirty, you can use some warm soapy water, but make sure to dry it thoroughly afterwards.

Where can I find spare parts for the Candino C4431?

Spare parts can be obtained from authorized Candino dealers or directly on the brand's website. It is recommended to contact their customer service for more information.

What is the warranty on the Candino C4431 watch?

The Candino C4431 watch is generally covered by a 2-year warranty from the date of purchase. Keep your receipt as proof of purchase for any warranty claims.

How do I adjust the strap of the Candino C4431 watch?

To adjust the strap, you can remove links using an appropriate tool. If you are not comfortable doing it yourself, visit a jeweler or watchmaker.

USER MANUAL C4431 Candino

2501 Bienne Switzerland

a company of the Festina Group

www.candino.com

CANDINO

SWISS WATCH

MANUAL DEL USUARIO

USER'S MANUAL

MODE D'EMPLOI

Description of the display and control buttons 14
-Chronograph 15
- Setting the time. 20
-Quickly changing the date 21
- Setting the date and time 22

DESCRIPTION OF THE DISLAY AND CONTROL BUTTONS

14

CHRONOGRAFH: BASIC FUNCTION

START/STOP/RESET

Example:

1 Start: Press push-button A.
Stop: to stop the timing, press push button A again hand read the three chronograph counters: 4 min/38 s/7/10s
Zero positioning:

Press push-button B.

(The three hands of the chronograph go back to zero].

CHRONOGRAPH:

ACCUMULATED TIMING
1/10 second counter

Push button B

Example

1 Start: (start timing)

Stop: [e.g. 15 min 5 sec following]

3 Restart: (timing is resumed)

-4*Stop[e.g.13min5sec following@]

28 min 1D sec

[the accumulated measured time is shown]

Reset:

The three chronograph hands are

returned to their zero positions.

Please note:

• Following 4 , the accumulation of the timing can be continued by pressing push-button A

[Restart/Stop, Restart/Stop,...]

CHRONOGRAPH:

INTERMEDIATE OR INTERVAL TIMING

Example

1 Start: [start timing]
Display interval:

e.g. 10 minutes, 10 seconds

[timing continues in the background].

Making up the measured time

(Th3 hods of the shampers)

The 3 hands of the chronograph

quickly recover the timed time that has gone by).

Stop: [The ending time is shown]

Reset:

The 3 bands of the chronograph go

back to zem

Please note

• After 8, other timing intervals can be timed by pressing push-button B (display interval time)/recovered timed time...)

17

ADJUSTING THE HANDS OF THE

CRONOGRAPH TO THE ZERO POSITION

Minute Second counter counter in the centre

1/10 second counter

19 19

Example:

One or more of the hand of the chronograph are not in their correct zero position and must be adjusted (ex. after changing the battery)

1 Pull out the crown to position III [all 3 hand of the chronograph go back to their correct or incorrect zero position].
Push press button A and B at the same time for at least 2 sec (the second counter hand in the centre turns 360^ a the corrective mode is activated)

Adjusting the centre stop second Singel step A 1 x short Continuous A long
Adjusting the next hand B
Adjusting the 1/10 second hand counter (position 6h)
Single step A1 x short. Continuous Among
Adjusting the next hand B
Adjusting the minute counter hand (position Sh)
Single step A x short Continuous A wing

Return the crown to position! Finished adjusting the hands of the chronograph (can be done at any time).

SETTING THE TIME

Pull out the crown to position III [the second hand stops].
Turn the crown until you reach the correct time 8:45.
* Return the crown to position 1.

Please Note:

• In order to set the time to the "approximate second", 1 must be pulled out when the second hand is in the "SD" position (I). After setting hour and minute hands, 3 should be put back in position at the "approximate second".

QUICKLY CHANGING THE TIME

Pull out the crown to position II [the watch continues to work].
Turn the crown until the correct data 1.
Push the crown back into position I.

Please Note:

The date can be changed during the date rollover phase between 9:00 pm and midnight by setting the date of the following day so that the automatic date change does not move ahead automatically from 1 day to midnight.

SETTING THE DATE AND TIME

2223

Example:
-Date/time on the watch:17/1:25AM
Current date/time: 4/8:30 PM
Pull the crown out to position II (the watch continues to work).
Turn the crown until you reach yesterday's date 3

*Pull out the crown to position III (the second hand stops).
Turn the crown until you reach the current date 4
Keep turning the crown until you reach the current time 8:30pm.
6 Return the crown to position I.

Please note:

• In order to set the time to the "approximate second", see the note in the "Setting the time" section.
  *Please observe the AM/PM clock rhythm.

Type of battery: 395 [29.5 mm x 2.5 mm / SR 927 SW] Accuracy of functioning: +20/-10 seconds per month

MODE D'EMPLOI

CHRONOGRAFEN AUF NULL

Drucknopf B

Beispiel