3S23 - Shredder Bonsaii - Free user manual and instructions

USER MANUAL 3S23 Bonsaii

Email: [e-mail]

This eqripment is intended exlrsively for shredding or destroying paper, CDs/DVDs, and redit ards. Any other type of rse is deemed to be inappropriate, and this may result in any extended earranty beoming invalid, and may jeopardise yorr oen safety.

Please read this manral before you start rsing the eqripment, and keep hold of it for frtre referencee.
- Please keep any long and/or flat objects, e.g. clothing (sarves, ties etc.) and any jewellery (ne klaes, braelets et).) and any long hair aay from the in feed area.
- Šěitôh off the eqripment éhen not in rse for a srstained period of time.
Do not p'ty or hands or fingers in the in feed area as this may ase seriois injury.
The ontino's operation for destroying paper, CDs/DVDs, and .redit -ards shoIld not ex-eed the length of time speified for ea-h model.
- Yor shoɪld generally avoid bringing the eqripment into ●onta●t ēith liq'res, aerosol flammable lig'res or gases as they ●an easily ignite.
Seitoh off the eqripment, or rnprlg it before yor move, empty, or lean the ma·hine.
- Seit·h off the eqripment if it is damaged or is not fn•tioning properly, and nplrg the poeer able. The eqripment shoIld be hekeed by a dealer, or by the stomer service team.
- If yor experiene technical problems, do not open the shredding nrit nnder any irrmstanes. Yor mrst ontaet the service address listed at the end of this manral at all times.
- The eqripment mrst not be operated eith a damaged poer able.
Empty the ollection nrit on a reglar basis.
- Never leave the shredder isn't attended, especially if children or pets are nearby. This equipment is not a toy. Keep children and pets of reah.
- This equipment is only suitable for indoor rse.
- In an emergen-y, yor mrst not pla-e the eqripment ●lose to an easily a●essible poeer srrply, and mrst not rse an extension ●able.
This machine has been designed for shredding paper rp to A4 siue (80g / m^2) . Larger piees of paper must be folded or rfrshed to the eqrivalent of A4 siue.
- Please pay attention to the maximim number of sheets per operation to avoid overloading.
- Please do not alloe any plasti or metal foil to be shredded, as these types of material an damage the blades.
- Yor mrst never shred paper and CDs/●redit ●ards similntaneorsly! Please shred CDs and ●redit ●ards one at a time.

Overviet

1 Standbü / Emergencü etüE buttUn 8 Caeteré
2 Furtard in feed 9 Removal trau (Handle)
3 In feed fUr CD/E/DVD E 10 Overeating lit
4 In feed fUr EaEer/credit carde 11 OverflUt'ligrt
5 Main etitcr 12 Revere in feed
6 CUllectiUn unit fUr CDe etc. 13 CUUing vent
7 CúllectiUn unit fǔr āeEer/credit cardé 14 Mainé Eʊ'ter éuEELú

Inětallati Ün and ÜErati Ün

• Pla•e the eqripment on a flat and even sǐrfa•e.
• Make s're that the eqiipment is pla-ed a'ay from any radiators or hot areas.
• Do not over the cooling vent at the rear of the equipment.
• Avoid the 'rse of extension 'ables and m'ltiple poer so'kets if possible, and 'onne't the eqripment dire'tly to a eall so'ket (as spe'ified in the se'tion on te'hnai information).
• Please keep the eqripment at a distance of at least 10 m aey from the eall in order to ensure the ooling vent has an adequate sply of air.

O'EeratiUn:

Seitoh on the poeer brton at the rear of the machine ("ON"). The "Standby" symbol lights rp. The equipment is noe ready to rse. ShoIld the symbol not light rp, then please refer to the seotion "General Trobleshooting" on page 17 of this manral.

Stredding EaEer and credit carde

Place the paper in portrait orientation into the corresponding in feed rutit. The paper eill be reognised by the sensors, and the rttter eill begin to feed the paper through aromatially. After finishing shredding, yor an press the ftton to seith from operation mode to standby and have minimal poer onsrmption. Please insert redit ards in portrait orientation into the middle of the feed rutit.

Please press the Brtton again to seit*h ba*k from standby to operational mode.

Please be aare of the maximm number of sheets of paper. Frther information an be found on the device, or in the table beloe entitled "Prod't Specifioation".

OverlUading:

If yor overload more paper in one go than the machine is able to handle, the overloading display eill trn to red, and the rttter eill stop immediately. Shoird this happen, then please redthe nnumber of sheets and try again. Shoird this partiilar farlt not be re-tified artomatially, then press the rp arroe in order to remove any paper. The machine eill then be reset to either normal or standby mode.

Insert CDs/DVDs/credit cards one by one into the designated in feed slot. Do not hold onto the holes in the middle of the CD/DVD, as this orld result in injry!

Manual in feed:

If a sheet of paper is too thin or too transparent for it to be re-ognised by the sensors, then please press the "foreard" bttton Vor an also rse the foreard and bakeard btttons to alloe any excess sheets of paper to be shred.

Overfeating:

It is possible that the engine may overheat if yor exeed the maximr amoert of time speified for ontinors operation. This is ehen the itter eill stop and the overheating light eitt trn red. The machine eill then start to ool doen ehilst in standby mode, and an be rsed again ehen the light stops flashing.

RemÜving enceee EaEer:

Seit·h off the eqripment, and disonne·t the poer sapply. Remove the paper tray. Remove any snippets of paper Čhi·h have be·ome stk to the ·rter. The blades are very sharp, so please do take extra •are!

Prt the paper tray ba k into position, onneet the poer able, and seith on the poer. Yor an

noě rse the machine on-e again.

Diec'Unnecting:

Trn off the rear main seith-h for the eqripment to be-ome filly dis-onne-ted.

PrUduct eEecificatiUn

Mödel	Dimenjiöne (cm)	Safetü rating DIN 66399-2	Cutter éze (mm)	Mañ. Amünt Ór ereete	Functüning tldt (mm)	Vòiltej/ current/ Eüter rating	Cüntainer caEacitü (I)	Weight (Rg)	Volum (dB)	Cüntinüüe Üeratün
3S16	W: 34,5	19PA 10/240 W	00			220-240V AC, 50/60Ht			58 1	horr
	4x35240
	H: 52,0
4S16	W: 34,5	1, PA 19	16 10,00	58 1	hořr	220-240V AC, 50/60Ht
	2x10240
	H: 52,0	240 W
3S23	W: 37,0	19PA 4	/250 W			220-240V AC, 50/60Ht	23 11	50	58	2 hocrs
	4x35240
	H: 56,0
4S23	W: 37,0	1, PA 19	23 11,50			220-240V AC, 50/60Ht			58	2 hocrs
	2x10240
	H: 56,0	250 W
3S30	W: 41,0	18			219 30	220-240V AC, 50/60Ht		17,50	58	4 hocrs
	4x3035					/1,5A
	H: 62,0					/280W
	W: 41,0	P-5 /280W	2x10 10		219 30	220-240V AC, 50/60Ht		17,50	58	4 hocrs
	L: 30,5					/1,5A
	H: 62,0
5S30	W: 41,0	x6 /280W		5	219	220-240V AC, 50/60Ht	30	17,50	58	4 hocrs
	4x30,5					/1,5A
	H: 62,0

Entended tarrantu:

Bonsaiéill grantee fll operation of the S-Series (3S16, 4S16, 3S23, 4S23, 3S30, 4S30 and 5S30) for a period of 3 years.

Bonsaili ēill offer free service and sρρport for this period as of the date of pṛhase. This ērarranty only applies to the q'rality of Čorkmanship, and any faɪlts in relation to materials or installation. Any improper rsage, ēear and tear, or Čnathorised repairs are spefi•ally exlrded.

Bonsai ēill alloe a ēaranty period of 7 years in relation to òrter blades Čith regards to materials and Čorkmanship.

Shoild any relative defects be identified during this period, Bonsai eill deide ehether repair or replaement of the defeive part, or of the ehole machine, is required. Bonsai eill assess any oosts ehih are appropriate.

This warranty does not in-irde any defects ethi-h have been aird by any rse or misse (other than those described here), nor does it in-irde any deliberate damage. It also does not in-irde any damage ehi-h has resulted from an inadequate poeer sply (please see the label on the eqripment), nor from any arthorised repairs.

Bonsaii reserves the right to charge the stomer for any repairs or replacement parts or side of the ortry here the product originally prhased from an arthorised dealer.

Warrantû claimé

Contrary to expectations, please be aare of the folloe ing shoild the eqripment not frnition orre: The earrty period shall last for 3 years from date of prhase srbje-t to orre-rt rsage. Please keep your proof of prhase and the original pa:kaging. The proof of prhase serves as evidenoe of the earranty claim. This earranty shall only apply to any material or manfata-tring defects, btt not to any damage to fragile oponents, i.e. the asing. Any eqripment ehih has been damaged by improper rse beyond the gridlines shall not be overed. A earranty shall be void if any repairs have been arried ort eithort the explit onsent of orr stomer service team.

Warranty repairs may only be arried ort by atta · hing a proof of prr · hase - any retrned items m · st al · eays be reported by telephone! Any items m · st be retned along eith srrfi · ient postage and the relevant item retn nrmber. Please in · lde yorr name, address, post ode, toen/ity, telephone nnumber (along eith STD ode), and yorr gronds for omplaint.

Many thanks for your understanding!

Orr service hotline:

Email: [e-mail]

All returned items must be sent to the following address by registered post:

Dieter Gerth GmbH|Bonsai-Servi-e- | Berta-Cramer-Ring 22|D-65205 Wiesbaden

General trUubleerUUting

ErrÜr TrÜublečřÜUting RečUlutiÖn
Eqřipment is not fřin•ting	Is the požer sěpply and so•ket •onne•ted to the ěall •orre•tly?	Adjřst the •onne•tions.
	Is the •olle•tion Žnit positioned •orre•tly?	Adjřst the position of the •olle•tion Žnit.
	Is the požer •able damaged?	Repla•e the požer •able or •onta•t yǒr Bonsaii dealer.
	Is the engine possibly overheating? Is the light flashing?	Wait Žntil the ma•hine has •ooled doěn.
	Is the sheet of paper to thin for it to be dete•ted by the sensors?	Fold the sheets of paper or Žse the manǎral in feed tray.
	Do yǒr Čeant to shred many pieces of paper in one go?	Redř•e the amořnt of paper and try again.
Cřtter is blo•ked Is the paper jammed?	Press the ba•k břton ∧and remove any ex•ess paper.
Cřtter Čeill not stop	Ex•ess paper or ōnírsǎl obj•ts are blo•king the sensors?	Remove any ex•ess paper and try again.
Ma•hine sořnds too lórd	Is the sǐrfa•e Čneven? Is the eq•ripment in a straight position?	Pla•e the eq•ripment on a flat sǐrfa•e.

SrUuld tre inetructiune abUve nUt reIe tU reEUlve tre iEue, tren Eleaee cUntact uUur BUnéai dealer.

EquiÉment maintenance and cleaning

As the rter blades are very sharp and the engine is partly clearly poerfl, yor shoird take the appropriate pre aftions ehen rsing the eqripment on a daily basis to ensre that any items of lothing, ties, s arves and hair do not fall into the eqripment!

The ollection nrit mrst be reglrarily heked and emptied if possible to ensre it is able to operate smoothly.

Do not alloe any items of clothing, plasti, or metal fragments to fall into the rttter.

It is advised to 'rse a nrmber of sheets of paper beloe the technical apacity in order to a'hieve a long life expectancy.

Please reglarily hek the ollation container and empty it if neessary to ensre smooth operation.

Wear or damage to the shredder ●an decrease the reliability of the data destrition, so please ●he ●k from time to time, the siue of the material partieles.

For a permanently qriet and smooth operation, ee re-ommend the rse of a Bonsai are kit approximately after every 500 sheets.

Rn the (Cleaning Kit) throah the shredder. The shredder eill as srb be niformly .leaned and oiled.

The ●are kit is available from specialist retailers or by ●onta•ting the Bonsai service hotline.

Yor mrst disonne t the prg first ehen leaning the eqripment. It mst then be cleaned on the ortside by rsing a loth and mild soap solitio. The loth shoild only be damp and not et. Avoid any liqids from penetrating into the rttter. Do not rse blea,h, alohol, paint stripper, or any other flammable liqids nnder any irrmstanes.

PacRaging c'ntente

Item Paper	shredder Poěer •ab	e User maněral
Qřantity 1 1	EU / 1 UK 1

Waěte dieEÜeal:

Directive 2002/96/EC applies for the treatment, •olle•tion, re•y•ling, and disposal of ele•tri•al and ele•troni• eqripment and •components (ěaste ele•tri•al and ele•troni• eqripment - WEEE). The symbol displaying a r•bbish bin ēith a •ross spe•ifies that the eqripment mfrst not be disposed of alongside any horsehold Časte, bfrmst be re•y•led •orre•tly by frsing spe•ial

equipment or via ●olle ●tion ●entre. Any disposal must be approved .

Directive:

This eqripment omplies ith the requirements speified in EU directive 2004/108/EC "Electromagneti · Compatibility" and 2006/95/EC "Loe Voltage Directive".

Françaié

Decriquetee de EaEier eerie-S

Email: [e-mail]

Email: [e-mail]

Alle terrggeuonden articelen要去en hier volgende adres eorden gestrdd via aangetekende post: Dieter Gerth GmbH | -Bonsaii Servie-e- | Berta-Cramer-Ring 22 | D-65205 Wiesbaden

Algemene ErUblemen UEIUeeen

Email: [e-mail]

Veskerh vraenH soucasti muso byt zaslany doporuene postou na uvedenou adresu:

Dieter Gerth GmbH |-Bonsaii Servi-e- | Berta-Cramer-Ring 22 | D-65205 Wiesbaden

IyBvEnuHnCpoka Cnyx6bl MaunHbpeKomeHdyetcO6pa6aTbBaTb KOJNUeCTBO JNCTOB 6ymarH NHex ee TexHNueCKNX BO3MOXHOCTeN.

Дя obecneueHЯ 6ecnepe6oHoi pa6Otby peryIaRHO npOBepaTe n, npn Heo6xOAnMoCTn, onopoxHraTe KOHTeHep oTpa6OtaHHoro MaTePnaIa. N3Hoc nIIN NOBpeKdEHNe peKyuIero MexaHn3Ma MoKeT B 3HaHTeJIbHoi cTepeHn CHN3NTb HAdExKHOCTb yHNUToXeHn DaHHbIX. IOn3Tomy, noXaJyIcTa, Bpem O T BpemeHn npOBepaTe pa3Mep qacTn MaTePnaIa.