Captur Module Pro - Remote control Hähnel - Free user manual and instructions

USER MANUAL Captur Module Pro Hähnel

English 8
German 12
French 16
Polish 20
Dutch 24
Spanish 28
Czech 32
Portuguese 36
Swedish 40
Finnish 44
Italian 48
Hebrew 51

Wireless: Requires Captur (sold separately)

Wired: Requires Camera Cable (sold separately)

Example:

3	DELAY	= 0:00'00"	Delay 1 hour
4	LONG	= 00:00'00"	No long
5	INTVL1	= 00:00'10"	10 sec interval 1
6	N1	= [003]	3 shots interval 1
7	INTVL2	= 00:01'00"	1 min interval 2
6	N2	= [003]	Repeat 3 x interval 1

Manual Remote Control

1 Beeper ON/OFF
2 Bton Lock
3 Delay before shooting starts
4 Duration of burst/exposure with continuous/bulb
5 1st interval time
6 Number of shots at 1st Interval

INTVL2N Number of times INTVL1

program is repeated

7 2nd interval time

8 Low battery indicator

9 Hours

10 00' Minutes

11 00" Seconds

Shot count 0 to 999, -- (unlimited)

13 Sensitivity adjustment

14 Day before shooting starts

15 Duration of burst/exposure with continuous/bulb

16 [---] 0 to 999, -t-(time lapse), --- (unlimited)

17 SOUND Sound triggering

18 InRa-Red triggering

19 Light triggering

20 Lasering

21 AUX Auxiliary triggering

22 Light/Laser Built-in Light and Laser sensor

Sound Built-in Microphone sensor

24 IR Built-in IR sensor

25 Slutter release LED

26 AUX Auxiliary sensor input socket

27 SET SET button

28 Toggle Button

29 Module - IR IR beam generator

The Captur Module - Pro is used as an accessory with the Captur (sold separately) to control the camera wirelessly. The Captur and the Captur Module - Pro must be channel matched using DCM. Alternatively you can also connect the Captur Module - Pro directly to a DSLR camera with a camera cable (sold separately).

Digital Channel Matching - DCM (Requires Captur Transmitter)

a. Transmitter - Press and hold button + Turn 'ON'. LED will flash green rapidly
b. Timer - Press and hold SET button 27 + Turn ON'. LED will show steady red
c. Receiver - Press and hold button + Turn 'ON'. LED will show steady red
d. DCM is complete. Turn both Module - Pro, Receiver and Transmitter 'OFF' and 'ON' to reboot

Note: For multiple Receivers repeat step 'c' for all receivers without turning off transmitter

Manual Remote Control

The Release Button works similarly to the camera shutter release. 12 push = Autofocus, LED 25 shows steady green. Full push = Shutter release, LED 25 shows red. To 'HOLD' the shutter release for bulb photography, press down Release Button for more than 3 seconds and LED 25 will flash red. Press Release Button again to release the hold.

Interval Timer Programmable Functions

Ensure that LCD is displaying 3, 4, 5, 6 or 7. Press Start/Stop button to 'Start' the 'Interval Timed Photography'. The Captur Module - Pro will now take a photo continuously at the factory set interval time. Press Start/Stop again to 'Stop' the interval timed photography. Press SET button 27 to adjusted parameters. Toggle Button 28 + or - is used to adjust the value of the parameters. Press SET button 27 again to confirm adjustment. The values of the following parameters can be adjusted as required. Use Toggle Button 28 < or > to move between the parameters which need to be adjusted.

Parameters	Description	Setting
3 DELAY	Delay before 1st shutter is released	0s to max 99hrs 59'min 59"s (in 1s increments)
4 LONG	Burst/bulb time
5 INTVL1	1st Interval Time	1s to max 99hrs 59'min 59"s (in 1s increments)
6 N	INTVL1N = Number of shots for 1st Interval	1 to 999 and --- (unlimited)
	INTVL2N = Number of times INTVL1program is repeated
7 INTVL2	2nd Interval Time	1s to max 99hrs 59'min 59"s (in 1s increments)

Sensor triggering

The Captur Module - Pro has build in sensors which can trigger the camera. Use Toggle Button 28 < or > to move from one sensor to the other to select the required sensor (e.g. SOUND 17). Now press Start/Stop button to 'Start' the sensor triggering. The Captor Module - Pro is now ready to trigger camera and, LED 25 shows steady green. When the Captur Module - Pro is triggered by the sensor, it will trigger the camera to take photo and LED 25 shows red momentarily (e.g. with "SOUND" started "clap you hand" and the Captur-Pro will trigger. You may need to adjust the "sensitivity" 13 to trigger the sound)

Sensor	Description	Comments
17 SOUND	Trigger sound sensor 23	Adjust sensitivity 13 level
18 IR	Align Captur Module - IR 29 with sensor 24 to create a beam	Breaking the beam will trigger the Module - Pro
19 LIGHT	Trigger light sensor 22	Adjust sensitivity 13 level
20 LASER	Align any Laser Pen (sold separately) with sensor 22 to create a laser beam	Breaking the beam will trigger the Module - Pro
21 AUX	Triggered by external sensor connected to AUX socket	Refer to www.hahnel.ie for more info

Note:

• More information available on www.hahnel.je
• Wrong connection of external AUX sensors may damage the Capture Module -Pro.

There are several parameters which can be adjusted for each sensor of the Captur Module - Pro. Use Toggle Button 28 < or > to move from one sensor to select the sensor and to select which parameters need to be adjusted. (e.g. move to SOUND 17). Press SET button 27 to adjusted parameters. Toggle Button 28 + or - is used to adjust the value of the parameters (e.g. adjust icon 13 to 80 for more sensitive sound triggering). Press SET button 27 again to confirm adjustment.

Parameter		SettingDescription
13	Sensitivity adjustment Min 01 -	99 max
14	Delay before shooting starts 0s	to max 10s in 1/100th second increments
15	Duration of burst/exposure with continuous/bulb mode in camera	0s to max 05" sec (in 1 sec increments)
16	Number of times sensor is allowed to trigger the Module - Pro	00 - 99 -t- = (starts time lapse) --- = (unlimited)

Beeper and Lock settings

• Press Lock to turn ON and OFF the beeper 1. Beeper will "beep" when camera is triggered by any program
• Press and hold Lock to or the Captur Module - Pro buttons. The Release Button will always remain active

Warning.

• Do not modify product
• Keep Captur Module - Pro and Captur Module - IR, dry at all times
• Do not use in the presence of flammable gas
• Keep out of the reach of children
• Do not expose to excessive temperatures or strong direct sunlight
• Do not leave the unit in the trunk or on the dashboard of a vehicle.
• Overheating can result in leaking, fire or explosion
• Observe correct battery polarity
• Dispose in accordance with appropriate environmental regulations
• Take battery out of unit if stored for an extended period of time

Scan QR code for more information on the Captur Module Pro

Digital Channel Matching

Captur Module-Pro,77n77n77n77n.
nNN nN nn nnn nnn nnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnne 27) (SET 27) nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn nn

25LEDn7n，n1n=πn% 25LEDn7n，n1n=nn n7n 25LEDnn，n7n.

34100N N LCD 27
n nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nnnn nn

灭菌时间	灭菌	灭菌时间
npt 59 nww 99 anap oop y niw 1 (nww 1 w anan)	nwnn aon nwnn nwnn	3 DELAY
	nwnn npt	4 LONG
npt 59 nww 99 anap oop y niw 1 (nww 1 w anan)	nwnn nwnn npt	5 INTVL1
(nwnn nwn)---, 1999 nwn	nwnn nwnn nwn = INTVL1 N	6 N
	nwnn nwn nwn nwn = INTVL2 N
	nwnn nwn nwn nwn nwn nwn INTVL1
npt 59 nww 99 anap oop y niw 1 (nww 1 w anan)	nwnn nwn npt	7 INTVL2

Captur Module-Pro
28
/Sound
17
Captur Module-Pro
25LED
Sound 25 LED n nn
n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

13	23	24	25	26	27
13	22	23	24	25	26
13	22	23	24	25	26
13	22	23	24	25	26
13	22	23	24	25	26

Captur Module Pro nnnn nn nnnn nn nnnn

Captur Module-Pro w nnnn nn nnnn nnnn nnnn

28 2

nnaa nnae 17] 7n nn nnnn nn

17 SOUND

28 177777777777777777777777777

80 13 nn nnnn

SET 27 nnnn nn n nn [nnnnnnnnnnnnnnn

1111111111

All product specifications subject to change without notice E.SO.E.

All brands, trademarks and registered trademarks are the property of their respective holders. Copyright © hahnel industries Ltd, Ireland.

www.hahnel.ie

A product of hahnelindustries Ltd, Ireland. Made in China

Rev 04/19