Hello Kitty - Humidifier LANAFORM - Free user manual and instructions

USER MANUAL Hello Kitty LANAFORM

Timer Power Water L M H Mist 2H 8H

Timer Power Water L M H Mist 2H 8H

Hello Kitty 3EN INSTRUCTION MANUAL We would like to thank you for your interest in the HELLO KITTY humidifier from LANAFORM®. For human beings, the most comfortable relative humidity is between 45% and 55%. Air which is too dry and which is poor quality may be the source of many problems for our children: respiratory problems, dehydration, etc. The HELLO KITTY humidifier is the perfect solution to this problem. Very easy to use, the HELLO KITTY humidifier is equipped with a 1.8 litre tank, which is easy to fill and secure in place. It has an autonomy of more than 8 hours, guaranteeing a peaceful night for your child. The HELLO KITTY humidifer is equipped with an integrated safety system which guarantees safe usage. It works immediately and silently, and has an adjustable vapour output and diffusion period. PLEASE READ ALL INSTRUCTIONS PRIOR TO USING YOUR HUMIDIFIER; IN PARTICULAR THOSE RELATING TO BASIC SAFETY:

• Only use this appliance according to the directions for use set out in this manual.

• Make sure that the voltage indicated on the appliance corresponds to that of your power supply.

• This appliance is not designed for use by people with reduced physical, sensory or mental capabilities (including children), or people without experience or knowledge of the product, unless it may be beneficial to them and the person responsible for their safety can supervise them and has received advice and instruction in using the appliance. Children should be supervised to ensure they do not play with the appliance.

• Only use accessories which are recommended by LANAFORM® or which are supplied with this appliance.

• If the flex is damaged, it must be replaced with a suitable flex which is available from the supplier or after-sales department.

• Do not use the appliance if the power socket is damaged, if the appliance is not working correctly, or if it has been dropped, damaged or has fallen into water. Have it checked and repaired by the supplier or after-sales department.

• Always unplug the appliance after use and prior to cleaning.

• Immediately unplug an appliance which has fallen into water prior to recovering it.

• Electrical appliances should not be left plugged in while unsupervised. Unplug when not in use.

• Keep the flex away from hot surfaces.

• Never use this appliance in a room where aerosol products (sprays) are used or in a room where oxygen is administered.

• This appliance is designed exclusively for home use.

• Never obstruct the ventilation openings or position the appliance on an unstable surface such as a carpet or a mat. This may obstruct ventilation. Make sure that the ventilation holes are not blocked up with hair, fluff, dust, etc. Do not insert any object into them.

• Always position the humidifier on a hard, flat, horizontal surface, at least FIFTEEN centimetres from walls and keep away from heat sources such as cookers, radiators, etc. The humidifier will not work correctly on a non-horizontal surface.

• Do not use this appliance near water, electric appliances or wooden furniture.

• Never attempt to plug in or unplug this appliance if you are in contact with water or a damp environment. This could cause a risk of electric shock.

• Never immerse or plunge the appliance into water or any other liquid to clean it.

• The ultrasound humidifier must be cleaned regularly. To do this, please refer to and respect the cleaning instructions in this manual. 4EN

• Never dismantle the base unit.

• If there is water leaking from the appliance or if there is an unusual smell during use, switch the appliance off immediately and return it to the supplier or after-sales department.

• NEVER add any substance other than distilled or demineralised water to the tank, at a temperature of below 40°.

• Never switch on the humidifier when there is no water in the tank.

• Do not shake the appliance. This may cause the water to overflow into the base unit and prevent it from working correctly.

• Never touch the water or the immersed components when the unit is switched on.

• To prevent damage to components, do not splash the inside of the base unit.

• Never scratch the transducer.

• In temperatures of below freezing (below 0°C), remove the water from the tank and the base to prevent the risk of freezing.

• Do not use the humidifier if the air in the room is already humid enough (at least 50% relative humidity). Excessive humidity is signalled by condensation on cold surfaces or cold walls in the room. To determine the humidity of the room correctly, use a hygrometer, available from most hardware and department stores.

• It is advisable to use the appliance at a temperature of between 5 and 40°C and in a relative humidity of below 50%. COMPONANTS (Fig. 1)

• Continuous operation for more than 8 hours

• Easy-fill water tank

• Integrated safety mechanism which automatically stops the diffuser from working when the water tank is empty or depending on the chosen diffusion period

• High-quality transducer guarantees correct and long-lasting operation Functions:

• Increases and regulates the relative humidity of the room

• Eliminates electrostatic charges

• Improves air quality Directions for use:

• Position the appliance in the room half an hour prior to switching it on so that it is the same temperature as the room.

• Remove the water tank from the appliance ( Fig. 2) and unscrew the cap by turning it anticlockwise (Fig. 3).

• Fill the tank with distilled or demineralised water at a maximum temperature of 40°C (Fig. 4).

• The humidifier is equipped with a water filter. This especially helps deal with the calcium content of the water. To attach this, attach the water filter to the inside of the tank cap.

• Check that the silicone washer is correctly in place and then close the cover by turning it clockwise.

• Make sure that it is clean and watertight then carefully position the tank in the base unit ( Fig. 5).

• With dry hands, plug in and switch on the appliance. The yellow warning light which indicates that water is present lights up. The appliance starts working on the low vapour intensity (warning light on) ( Fig. 6).

• You can then adjust to the desired vapour intensity by turning the vapour output adjustment button (Fig. 7).

Once the tank is empty or the diffusion time has come to an end, the safety mechanism located inside the appliance will automatically stop the electricity supply if the circuit is overheating The “water presence” warning light turns red (Fig. 9).

• Strict monitoring is required at all times to prevent any risk. CAUTION: DESPITE THE SAFETY MACHANISM WHICH STOPS THE TRANSDUCER FROM WORKING, WHENEVER POSSIBLE SWITCH OFF THE APPLIANCE WHEN NOT IN USE. MAINTENANCE AND STORAGE: If the water is hard, i.e. it contains a lot of calcium and magnesium, this can deposit a “white powder” inside the appliance and cause a thick build-up on the surface of the basin, transducer (ceramic disc which produces the ultrasounds) and interior walls of the water tank. Build-up on the surface of the transducer prevents the appliance from working correctly. We recommend:

1) always using water which has been boiled and then cooled or distilled water,

2) cleaning the tank every 3 days, cleaning the transducer every week,

3) changing the water in the tank regularly so that it is fresh, not leaving it in the appliance for more than 2 days,

4) cleaning the whole appliance and making sure that all its components are completely dry when not in use.

6EN To clean the transducer:

1) Place 2 to 5 drops of vinegar on the surface and leave for 2 to 5 minutes.

2) Brush the build-up from the surface using a soft brush. Do not use a hard tool to scrape the surface.

3) Rinse the transducer in clean water.

4) Do not use soap or any other alkaline substances to clean the transducer.

To clean the basin unit:

1) Clean the water basin using a soft cloth and vinegar if there is build-up OR calcium deposits inside.

2) If the build-up is covering the safety switch, place a few drops of vinegar on it and clean using the brush.

3) Rinse the basin in clean water.

1) Carefully clean and dry the ultrasound humidifier, following the maintenance instructions.

2) Leave to dry completely before storing it away. Do not store away when there is water in the base.

3) Store the appliance in a cool dry place, out of reach of children.

To clean the filter: a) The demineralising effect and longevity of your filter depends on the mineral content of the water used in the humidifier. We would like to remind you that it is recommendable to use distilled or demineralised water. b) Make sure to rinse the filter in clean water every 2 days. To do this, remove it from the tank cap.

PROBLEMS AND SOLUTIONS

In the event of malfunctioning under normal conditions of use, please refer to the following table:

PROBLEM POSSIBLE CAUSES SOLUTIONS

Fan not working, no mist No electric current Plug in the appliance Main switch closed Turn on main switch The water level in the tank is too low Add water to the tank Leak in the water tank Close the lid properly Wind, but no mist No water in the tank Fill the tank The water level indicator is not in the right position Correctly reposition the water level indicator The temperature of the unit is too low Put the unit in a room at ambient temperature for half an hour before use. Strange mist smell Water has been stagnating too long in the tank Clean the tank and add clean water Too little intensity Too much water in the groove Empty water from the groove and put the tank back Mist adjustment is set at a minimum Adjust intensity adjustment knob Sediment on the transducer Clean the transducer Water too cold Use water at ordinary temperature Water is not clean Clean the tank and add fresh water. Hello Kitty 7EN The mist does not rise The mist intensity is set at minimum Adjust the intensity. The tank and the base are not perfectly matched Correct this. The fan does not function correctly Ask a professional to verify the ventilator in the base. Noise Resonance due to a low level of water in the tank Add water in the tank. Resonance due to an unstable surface Place the unit on a stable surface. TECHNICAL DETAILS

• Maximum evaporation rate: 220ml/h

• Water tank capacity: 1.8l

• All the packaging is composed of materials that pose no hazard for the environment and which can be disposed of at your local sorting centre to be used as secondary raw materials. The cardboard may be disposed of in a paper recycling bin. The packaging film must be taken to your local sorting and recycling centre.

• When you have finished using the device, please dispose of it in an environmentally friendly way and in accordance with the law. LIMITED WARRANTY LANAFORM® guarantees this product against any material or manufacturing defect for a period of two years from the date of purchase, except in the circumstances described below. The LANAFORM® guarantee does not cover damage caused as a result of normal wear to this product. In addition, the guarantee covering this LANAFORM® product does not cover damage caused by abusive or inappropriate or incorrect use, accidents, the use of unauthorized accessories, changes made to the product or any other circumstance, of whatever sort, that is outside LANAFORM®’s control. LANAFORM® may not be held liable for any type of circumstantial, indirect or specific damage. All implicit guarantees relating to the suitability of the product are limited to a period of two years from the initial date of purchase as long as a copy of the proof of purchase can be supplied. On receipt, LANAFORM® will repair or replace your appliance at its discretion and will return it to you. The guarantee is only valid through LANAFORM®’s Service Centre®. Any attempt to maintain this product by a person other than LANAFORM®’s Service Centre will render this guarantee void. 8FR

AVERÍAS Y MEDIDAS CORRECTIVAS

BESCHRÄNKTE GARANTIE