New Vapolux LA120119 - Humidifier LANAFORM - Free user manual and instructions

Product type	Ultrasonic humidifier
Brand	Lanaform
Model	New Vapolux LA120119
Dimensions (approx.)	25 x 25 x 35 cm
Weight	2 kg
Power supply	220-240 V, 50 Hz
Power consumption	25 W
Tank capacity	4 litres
Max steam output	300 ml/h
Coverage area	Up to 30 m²
Noise level	35 dB (A)
Main functions	Flow adjustment, automatic shut-off when water runs out, water level indicator, essential oil diffuser (optional)
Maintenance and cleaning	Weekly cleaning of the tank and bowl with a soft cloth and diluted white vinegar. Regular descaling recommended.
Safety	Automatic shut-off when tank is empty, overheat protection
Spare parts and repairability	Replacement filter available (ref. LA120119F). Repairable by an approved professional.
General information	Household appliance. 2-year warranty. Made in China.

Frequently Asked Questions - New Vapolux LA120119 LANAFORM

How to start the New Vapolux humidifier?

Fill the tank with cold water (not hot water), replace it correctly, plug in the device and turn the adjustment knob to turn on and adjust the steam flow.

Can I use essential oils in my humidifier?

Yes, the New Vapolux has a compartment for an essential oil diffuser. Add a few drops of essential oil into the provided reservoir. Never pour oil directly into the main water tank.

Why does the device stop by itself?

The humidifier automatically stops when the water level is too low or the tank is empty. This is a safety feature. Fill the tank to restart it.

How to properly clean the humidifier?

Unplug the device. Empty the remaining water. Clean the tank and bowl with a soft cloth soaked in diluted white vinegar (1:1 with water). Rinse thoroughly with clean water. Avoid abrasive products. Descaling every month is recommended.

What is the warranty for the New Vapolux LA120119?

The device comes with a 2-year warranty against manufacturing defects. Keep your receipt.

Is the noise level bothersome at night?

No, the noise level is about 35 dB, which is very quiet, comparable to a whisper. You can use it in a bedroom without disturbance.

What is the tank capacity?

The tank has a capacity of 4 litres, allowing continuous use for about 12 hours at medium flow.

Can I use the device with tap water?

Yes, but to prevent limescale buildup, it is recommended to use demineralized or filtered water. Otherwise, regular descaling will be necessary.

How to replace the filter?

The replacement filter (ref. LA120119F) is located under the tank. Unscrew the cap, remove the old filter, insert the new one, and screw back on. Replacement every 3 to 6 months is recommended depending on usage.

What to do if the device does not produce steam?

Check that the tank contains water and is properly engaged. Make sure the adjustment knob is turned to a flow position. If the problem persists, clean the ultrasonic membrane with a cotton swab soaked in white vinegar.

USER MANUAL New Vapolux LA120119 LANAFORM

EN Product components, 6.

The photographs and other images of the product in this manual and on the packaging are as accurate as possible, but do not claim to be a perfect reproduction of the product.

Thank you for purchasing the New Vapolux cool mist humidifier by LANAFORM. The New Vapolux humidifier helps you to restore an appropriate humidity level and eliminate the discomfort associated with dry air. The ventilation system diffuses water in the form of cool vapour and thus provides the level of humidity required. This vapour takes the form of a mist coming out of a diffusion nozzle.

PLEASE READ ALL THE INSTRUCTIONS BEFORE USING YOUR HUMIDIFIER, ESPECIALLY THIS BASIC SAFETY INFORMATION

• Only use this device according to the instructions given in this manual.
• This equipment is not intended for use by people, including children, with limited physical, sensory or mental abilities, or by people lacking experience or knowledge, unless they are supervised or have been instructed beforehand on how to use the equipment by someone responsible for their safety. Children should be supervised to make sure they do not play with the device.
• Check that your mains voltage is the same as that of your device.
• Always place the New Vapolux humidifier on a hard, flat, horizontal surface. Always keep it away from walls and heat sources such as stoves, radiators, etc.

▲ If it is not placed on a horizontal surface, the device may not work properly.

• Do not connect or disconnect the plug of the device with wet hands.
• If the power cable is damaged, it must be replaced by a similar cable available from the supplier or the latter's after-sales department.
  • Do not leave the device exposed to direct sunlight.
• Fill the reservoir only with clean and fresh, distilled or demineralised water.

• Do not take apart either the device as a whole or even its base unit.

• Do not switch on the device when there is no water in the reservoir.

• Do not shake the device. This might make the water spill over into the base unit and prevent it from working.
• Never touch the water and components when the unit is running.
• If there is an unusual smell when it is being used as described in these instructions for use, switch the device off, unplug it and have it examined by the supplier or the latter's after-sales department.
• Do not use essential oils with this device.
  • Do not pour hot water above 40° C into the reservoir.
• Unplug the device before cleaning it or removing the reservoir.
• Do not wash the entire unit with water and do not immerse it in water. Consult the cleaning instructions in these instructions for use.
• Never scrape the transducer with a hard tool. The New Vapolux humidifier must be cleaned regularly. To do this, consult the cleaning instructions in this handbook and follow them.
• Unplug a device that has fallen into water immediately before retrieving it.
• An electrical device must never remain plugged in without supervision. Disconnect it when you are not using it.
• Keep the power cable away from hot surfaces.
• Never use this device in a room where aerosol products (sprays) are used or in a room or where oxygen is being administered.
• Do not put items of clothing or towels on top of the device. If the nozzle is obstructed, this may cause the device to malfunction.
• When moving the device, lift it up by the base and not by the water reservoir.
• Do not use the humidifier if the air in the room is already sufficiently humid (relative humidity of at least 50% ). The ideal relative humidity level for human comfort is in fact between 45% and 55% . Excess humidity manifests itself in the condensation on the cold surfaces or the cold walls of the room. To measure the room's humidity correctly, use a hygrometer available in most specialist shops and hypermarkets.

- The New Vapolux humidifier is designed for indoor and domestic use only.

PRODUCT COMPONENTS, 2, 2

1 Diffuser sprinkler tip
2 Water reservoir
3 Base of the device
4 Control panel and display screen
5 Demineralisation cartridge (filter)
6 Water reservoir lid

DEVICE DISPLAY, 📋, 3

1 "ON/OFF" button
2 Button for producing negative ions
3 Button for adjusting level of emission intensity
4 Button for adjusting relative humidity level
5 Button for adjusting timer
6 Negative ion production display
7 Button for adjusting relative humidity level
8 Timer display
9 Level of emission intensity display

INSTRUCTIONS FOR USE

Features

• Cool mist humidifier
- LCD screen
• Automatic detection and display of ambient relative humidity
• Capacity for programming desired humidity level
• Timer: 12 hours with programming in 1-hour stages
• 3 levels of vapour emission intensity: low, medium, high
- Negative ion production
- Remote control
• Capacity of water reservoir 4.5L
• Maximum flow rate of cool mist: 400ml/hour
• + 11 hours of continuous diffusion at 400ml/hour
• Automatic shutoff device when the water reservoir is empty
• Automatic shutoff device when the water reservoir is lifted up
- Quiet operation (≤35dB)

Features

• Air humidifier
• Eliminates electrostatic charges
• Improves ambient air quality

Fitting the demineralisation filter

Attach the demineralisation filter to the inner wall of the reservoir lid by turning it clockwise as shown in Figure 3, item (h). Conversely, to remove the demineralisation filter, turn it anticlockwise.

Instructions, 📁, 4

1 Place the New Vapolux humidifier in the room half an hour before turning it on so that it can adjust to room temperature.
2 Make sure it is always placed on a hard, flat and horizontal surface, items (a) (b). Always keep it away from walls and heat sources such as stoves, radiators, etc.
3 Make sure the device is clean before starting to use it.
4 Remove the reservoir using its handle, item (c, d) and keep it upside down, item (e). Turn the reservoir lid in an anti-clockwise direction to open it, items (f) (g). Then pour clean and fresh, distilled or demineralised water into the reservoir. Replace the lid and turn clockwise to close it tightly, items (g) (f). Finally, fit the reservoir correctly on to the base of the device, items (e, d, c) (b, a).
5 Make sure your hands are completely dry when connecting and disconnecting the device and if they are not, then dry them.
6 The humidifier is now working.

▲ The control panel of the device (item 4, Figure is identical to the remote control (see Figure 2).

7 Press the "ON/OFF" button to switch on the device (item 1, Figure 2). Once the device is activated, you will be able to programme the various functions of the device as required.

To do this, press buttons:

• "lon" to produce negative ions in order to neutralise the electrostatic charges (item 2, Figure 2).
• "Max/Min" for adjusting the level of vapour emission intensity (item 3, Figure 2).
• "Humidity" for adjusting the level of relative humidity in the room in which the device is placed (item 4, Figure 2). If you do not press this button,

the device will be in manual mode, i.e. it will continue to emit the mist until you stop it or while there is water in the reservoir. Conversely, if you press this button, the device will go into AUTO mode and will only stop when it has reached the programmed level of relative humidity. To exit from this AUTO mode, you must go through the maximum programmable level of 90%.

- "Timer" for adjusting the length of vapour emission (item 5, Figure 2). To exit this mode, you will need to go through the maximum programmable period of 12 hours.

Important notes

• Only use clean, fresh, distilled or demineralised water to avoid any malfunction.
• Do not pour water into the diffuser sprinkler tip to prevent malfunction and fire risk (Item 1, Figure 1).
  • Make sure the reservoir lid is tightly closed after filling so as to avoid leakage or potential electric shocks.
• The reservoir must be kept clean. If the sprinkler tip emitting cold mist is dirty, clean it with a brush or damp cloth.

▲ Even though there is a safety device that stops the transducer working, do not leave the device connected when you are not using it.

MAINTENANCE AND STORAGE

If the water contains too much calcium and too much magnesium, it may deposit a "white powder" in the device. If this foam is deposited on the transducer (white ceramic ring emitting ultrasounds (item i, Figure 3)), this will prevent the New Vapolux humidifier from working properly.

Care

We recommend:

1 Using clean, fresh, distilled or demineralised water each time it is used.
2 Cleaning the reservoir every 2 days and cleaning the transducer every week.
3 Cleaning the device (see explanations below) and making sure that all its parts are completely dry when it is not in use.

To clean the transducer (white ceramic ring (item i, Figure 3))

1 Put 2 to 5 drops of vinegar on its surface and leave them there for 2 to 5 minutes.

2 Brush the foam off the surface with a soft brush. Do not use a hard tool to scrape the surface.
3 Rinse the reservoir of the base in clean water.
4 Do not use soap, solvent or spray cleaner to clean the transducer.

To clean the water basin

1 Clean the basin with water using a soft cloth and vinegar if there is foam or limescale deposits on the inside.
2 Rinse the basin in clean water.

To clean the cool mist emission nozzle of the device

1 Clean this with a brush or damp cloth.
2 Rinse the nozzle in clean water.

Storage

Having cleaned and dried the device, store it in a dry, cool place out of the reach of children.

TROUBLESHOOTING

In the event of a malfunction, under normal conditions of use, please refer to the following chart:

Effects Possible causes Solutions

No steam, no light showing	If there is no light Check that the device is connected and no breakdown has occurred in that area
	The water level in the reservoir is too low	Add water to the reservoir
	Water is leaking from the reservoir	Check that the reservoir is in the right position
	The temperature of the unit is too low	Place the unit in a room at ambient temperature for half an hour prior to use
Mist has an unusual smell	The water has been standing in the reservoir too long	Clean the reservoir, then pour into it clean, fresh, distilled or demineralised water
Low intensity	Too much/too little water in the reservoir	Empty the water out of the reservoir or add water to it
	Sediment on the transducer	Clean the transducer
	The water is too cold Use water that is at room temperature
	The water is not clean Clean the reservoir, then pour into it clean, fresh, distilled or demineralised water

ADVICE REGARDING THE DISPOSAL OF WASTE

All the packaging is composed of materials that pose no hazard for the environment and which can be disposed of at your local sorting centre to be used as secondary raw materials. The cardboard may be disposed of in a paper recycling bin. The packaging film must be taken to your local sorting and recycling centre.

When you have finished using the device, please dispose of it in an environmentally friendly way and in accordance with the law.

▲ Under no circumstances should spent batteries be disposed of with household waste.

LIMITED WARRANTY

LANAFORM guarantees this product against any material or manufacturing defect for a period of two years from the date of purchase, except in the circumstances described below.

The LANAFORM guarantee does not cover damage caused as a result of normal wear to this product. In addition, the guarantee covering this LANAFORM product does not cover damage caused by abusive or inappropriate or incorrect use, accidents, the use of unauthorized accessories, changes made to the product or any other circumstance, of whatever sort, that is outside LANAFORM's control.

LANAFORM may not be held liable for any type of circumstantial, indirect or specific damage.

All implicit guarantees relating to the suitability of the product are limited to a period of two years from the initial date of purchase as long as a copy of the proof of purchase can be supplied.

On receipt, LANAFORM will repair or replace your appliance at its discretion and will return it to you. The guarantee is only valid through LANAFORM's Service Centre. Any attempt to maintain this product by a person other than LANAFORM's Service Centre will render this guarantee void.

DISPLAY VAN HET APPARAAT, 📄, 3

BESCHRÄNKTE GARANTIE

DISPLEJ PŘÍSTROJE, 📄, 3

APPARATENS DISPLAY, 📄, 📋

Downloaded from www.vandenborre.be

New Vapolux

LA120119/LOT003

MANUFACTURER & IMPORTER

LANAFORM SA

POSTAL ADDRESS