DigitRadio 11 IR - Radio TECHNISAT - Free user manual and instructions

Features	Details
Product type	Digital radio
Connectivity	Wi-Fi, Bluetooth
Reception formats	DAB+, FM, Internet
Output power	2 x 5 W RMS
Display	Color LCD display
Additional features	Alarm, timer, clock radio
Power supply	Power adapter, battery operation
Dimensions	210 x 130 x 100 mm
Weight	1.2 kg
Maintenance	Regular cleaning, firmware update
Safety	Use only with the supplied adapter
Warranty	2 years
Included accessories	Power adapter, user manual

Frequently Asked Questions - DigitRadio 11 IR TECHNISAT

How do I reset my TECHNISAT DigitRadio 11 IR?

To reset your TECHNISAT DigitRadio 11 IR, press and hold the 'Menu' button for about 5 seconds until the screen displays 'Reset'. Follow the on-screen instructions to confirm.

Why can\u0027t I connect to my Wi-Fi network?

Check that you are within range of your Wi-Fi router and that you have entered the correct password. Also make sure your router is working properly and restart your radio if necessary.

How do I add radio stations to my favorites list?

To add a station to your favorites, listen to the station you want to save, then press the 'Favorites' button and select 'Add to favorites'.

What should I do if my radio\u0027s screen stays black?

If the screen stays black, try unplugging the device from the outlet, wait a few seconds, then plug it back in. If the problem persists, you may need to contact technical support.

How do I set the time on the TECHNISAT DigitRadio 11 IR?

To set the time, press the 'Menu' button, select 'Settings', then 'Clock'. Follow the instructions to adjust the time and date.

My radio doesn\u0027t receive FM stations well, what should I do?

Make sure the antenna is properly extended and oriented. Try moving the device to another location to improve reception. If the problem persists, check the auto-scan settings.

How do I update the software on my TECHNISAT DigitRadio 11 IR?

To update the software, go to 'Menu', select 'Settings', then 'Software update'. Make sure your radio is connected to the Internet to download the latest version.

Can I use headphones with my TECHNISAT DigitRadio 11 IR?

Yes, you can use headphones by plugging them into the jack located on the side of the device.

How do I adjust the volume on the TECHNISAT DigitRadio 11 IR?

Use the volume button located on the top of the device to increase or decrease the volume according to your preference.

USER MANUAL DigitRadio 11 IR TECHNISAT

Operating instructions

DIGITRADIO 11 IR

BESSER

MADE IN

GERMANY

TechniSat

Foreword

Dear customers,

Thank you for purchasing the DIGITRADIO 11 IR from TechniSat. These operating instructions are intended to help you familiarise yourself with the extensive functions of your new device and use them to their full potential.

They will help you to use the DIGITRADIO 11 IR safely and as intended.

It is intended for any person who sets up, connects, operates, cleans or disposes of the radio. Keep the operating instructions in a safe place for future reference.

You can find the latest version of the operating instructions in the download area of your product on the TechniSat website www.technisat.de.

We have written the operating instructions as clearly as possible and kept them as concise as necessary.

We hope you enjoy using your TechniSat DIGITRADIO 11 IR!

Yours

TechniSat Team

1 Table of contents

1 Table of contents 3
2 Safety instructions 8
2.1 Characters and symbols used 8
2.2 Intended use 10
2.3 The target group of these operating instructions 10
24 Safe handling of the DIGITRADIO 11 IR 10
3 Legal information 14
3.1 Service notes 17
4 Description of the DIGITRADIO 11 IR. 18
4.1 The scope of delivery 18
4.2 The special features of the DIGITRADIO 11 IR 19
4.3 Illustrations 20
5 Preparing the DIGITRADIO 11 IR for operation. 23
5.1 Setting up the appliance 23
5.2 Align antenna 24
5.3 Audio connection to stereo system, active loudspeaker 25
54 Connecting the power supply unit. 25

5.5 Insert BaGeries into remote control 27

6 General device functions 28
6.1 Operating the device with the remote control 28
6.2 Switch on the device. 28
6.3 Switch off the device 29
6.4 Source selection 29
6.5 Setting the volume 29
6.6 Mute. 30
6.7 Display 31

7 Menu operation. 32
8 Initial setup 34
9 Internet radio and podcasts 37
9.1 Channel list 37
9.2 Add Internet radio stations to your favourites 38
9.3 Selecting a favourite station 38
9.4 Deleting a programme position memory 39
10 Spotify Connect 39

11 Amazon Music 40
12 CALM RADIO 41
13 Classic Radio Select. 42
14 DAB+ Radio 43
14.1 What is DAB+ 43
14.2 Switch on DAB+ radio reception 44
14.3 Perform search run 44
14.4 Select channel list 46
14.5 Save DAB+ stations 46
14.6 Selecting the programmed stations 47
14.7 删除aprogramme position memory 47
14.8 Signal strength 48
14.9 Dynamic Label Plus 49
14.10 SetDRC 49
14.11 Delete inactive stations 50
15 FM radio. 50
15.1 Switch on FM radio mode 50
15.2 FM reception with RDS information 51
15.3 Automatic search 51

15.4 Setting the transmission frequency manually 52
15.5 Search setting 52
15.6 Audio settings. 53
15.7 Saving FM stations 53
15.8 Selecting the programmed stations 54
15.9 删除aprogramme position memory 54

16 Bluetooth audio streaming 54

16.1 Activate Bluetooth mode.. 54
16.2 Pairing an external device 55
16.3 Play music 56
16.4 Slide on coupling 57

17 Otherfunctions. 58

17.1 Sleep timer.. 58
17.2 Alarm clock 59
17.3 Equaliser 62

18 System settings 63
18.1 Internet settings 63
18.2 Time and date settings 68
18.3 Display settings 72

18.4 Language 74
18.5 Factory setting 74
18.6 System info. 75
18.7 SW update 75
18.8 Initial setup. 76
18.9 Data protection 76

19 Cleaning. 77
20 Eliminate errors 78
21 Technical data / manufacturer's information. 82
22 Disposal instructions. 85

2 Safety instructions

21 Characters and symbols used

Indicates a safety instruction that can lead to serious injury or death if ignored. Observe the following signal words:

DANGER - Serious injuries with fatal consequences

WARNING - Serious injuries, possibly fatal

ATTENTION - Injuries

Indicates a note that you must observe to avoid device defects, data loss/misuse or unintentional operation. It also describes additional functions for your device.

Warning of electrical voltage. Follow all safety instructions to avoid electric shock. Never open the appliance.

Indoor use - Appliances with this symbol are only suitable for indoor use.

Protection class II - Electrical appliances in protection class II are electrical appliances that have continuous double and/or reinforced insulation and no connection options for a protective conductor. The housing of an insulated electrical appliance of protection class II can partially or completely form the additional or reinforced insulation.

Your appliance bears the CE mark and fulfils all required EU standards.

Electronic devices/equipment should not be disposed of with household waste, but must be

• in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment. At the end of its life, please dispose of this device at the designated public collection points. BaGeries must be removed before disposing of the appliance and disposed of separately from the appliance.

Observe all notes and safety instructions in these operating instructions. Keep the operating instructions in a safe place for future reference. Pass these operating instructions on to the buyer when selling the appliance.

Direct current symbol. This device is operated with direct current and/or converts alternating current into direct current.

22 Intended use

The device is designed to receive and play radio programmes via DAB+, FM and the Internet. Furthermore, music media can be streamed via a WLAN network connection or via a Bluetooth connection. The device may only be operated with the accessories supplied (e.g. power supply unit, remote control, cable, aerial, etc.). Any other use of these accessories is not permitted. The device is intended for private use

and not suitable for commercial purposes. Any other use is considered improper use!

23 The target group of these operating instructions

The operating instructions are intended for any person who sets up, operates, cleans or disposes of the appliance.

24 Safe handling of the DIGITRADIO 11 IR

Please observe the following instructions to minimise safety risks, avoid damage to the appliance and contribute to environmental protection.

Please read all safety instructions carefully and keep them for future reference.

Always follow all warnings and instructions in these operating instructions and on the back of the appliance.

WARNING!

Never open the device or the power supply unit!

Touching live parts is life-threatening!

Observe all the following instructions for the intended use of the appliance and to prevent appliance defects and personal injury.

• Do not repair the appliance yourself. Repairs may only be carried out by trained specialists. Please contact our customer service centres.
• The device may only be operated in the specified ambient conditions.
• Do not expose the appliance to dripping or splashing water. If water gets into the appliance, disconnect it from the power supply and contact the service centre

• Do not expose the appliance to heat sources that heat the appliance in addition to normal use.
  In the event of a conspicuous appliance defect, odour or smoke development, significant malfunctions or damage to the housing, contact Service immediately.

• The appliance may only be operated with the mains voltage printed on the rating plate. Never attempt to operate the appliance with a different voltage. Only use the original mains adapter supplied.

• As this appliance is disconnected from the mains by pulling out the mains adapter/plug, it is essential that it is easily accessible at all times.
  If the appliance or the power supply unit is damaged, it must not be put into operation.
• Do not operate the appliance near bathtubs, showers, swimming pools or running/splashing water. There is a risk of electric shock and/or device defects.
• Foreign objects, e.g. needles, coins, etc., must not fall into the interior of the device. Do not touch the connection contacts with metal objects or your fingers. This may result in short circuits.
• This appliance is not intended for u s e by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Do not allow children

Never use this appliance unsupervised.

• Keep films and small parts away from children. Choking hazard!
• Modifications to the appliance are prohibited.

Dealing with BaUeries

• Make sure that BaGerien does not get into the hands of children. Children could put BaGeria in their mouths and swallow it. This can lead to serious damage to health. In this case, consult a doctor immediately! Therefore, keep BaGerien out of the reach of small children.
• Only operate the appliance with the baGeries approved for this appliance.
• Normal BaGeries must not be loaded. BaGeries must not be reactivated with other MiGels, taken apart, heated or thrown into an open fire (risk of explosion!).
• BaGerie contacts and device contacts must be cleaned before insertion.
  There is a risk of explosion if the BaGerie is inserted incorrectly!

• Replace BaGeries only with BaGeries of the correct type and model number

• Caution! Do not expose BaGerien to extreme conditions. Do not place on radiators, do not expose to direct sunlight!
  Leaked or damaged BaGeria can cause chemical burns if it comes into contact with the skin. In this case, use suitable protective gloves. Clean the BaGeria compartment with a dry cloth.

• If the appliance will not be used for a longer period of time, remove the batteries.

3 Legal information

Hereby, TechniSat declares that the radio equipment type

DIGITRADIO 11 IR is in compliance with Directive 2014/53/EU. The full text of the EU

Declaration of conformity is available at the following Internet address:

Alternatively, you can also find the EU Declaration of Conformity in the download area of your product on the TechniSat website www.technisat.de.

TechniSat is not liable for product damage due to external influences, wear and tear or improper handling, unauthorised repairs, modifications or accidents.

Subject to changes, printing errors and mistakes. Status 02/24.

Reproduction and duplication only with the authorisation of the publisher. The latest version of the operating instructions is available in PDF format in the download area of the TechniSat website at www.technisat.de.

DIGITRADIO 11 IR and TechniSat are registered trademarks of:

The names of the companies, institutions or brands mentioned are trademarks or registered trademarks of their respective owners.

The Spotify Sokware is subject to third party licences found here: hGps://www.spotify.com/connect/third-party-licences.

Amazon, Amazon Prime, Amazon Music Unlimited and all associated logos are trademarks of Amazon.com, Inc. or its affiliates.

In the countries listed below, the device may only be operated indoors in the 5GHz WLAN range.

BE	CY	FI	FR	HU	LV	LI
LU	NL	ES	SE	UK	CH	EN

All images shown in these operating instructions are for illustrative purposes only and may differ from the actual product.

3.1 Service instructions

This product is quality-tested and comes with a statutory warranty period of 24 months from the date of purchase. Please keep the invoice as proof of purchase. In the event of warranty claims, please contact the dealer of the product.

For questions and information or if there is a problem with this device, please contact our technical hotline:

Mon. - Fri. 8:00 - 18:00 under Tel.:

03925/9220 1800.

Repair orders can also be ordered directly online at www.technisat.de/reparatur.

If you need to return the device, please use only the following address:

41 The scope of delivery

Please check that the scope of delivery is complete before commissioning:

1x DIGITRADIO 11 IR
1x remote control + BaGerien
1x operating instructions
1x USB charging
cable 1x mains
adapter
1x throw antenna
1x audio cable

42 The special features of the DIGITRADIO 11 IR

The DIGITRADIO 11 IR consists of a DAB+/UKW/Internet radio receiver with the following functions:

• You can store up to 30 DAB+/ FM/Internet radio stations.
  The radio receives on the frequencies FM 87.5-108 MHz (analogue) and DAB+ 174.9-239.2 MHz (digital antenna).
• Internet radio via WLAN connection.
• Spotify Connect, Amazon Music, CALM RADIO and Klassik Radio Select streaming service.
  Music streaming via a Bluetooth connection.
  Alarm clock and sleep timer function.

• Control with the TechniSat CONNECT app.

• Depending on the service/subscription, additional fees may apply or a paid subscription/account is required.

Use of DriG service providers depending on availability.

The range of functions can be adapted or expanded/restricted by the DriG service providers at any time.

43 Illustrations

4.3.1 View from the front

4.3.2 View from behind

1 Colour display 4
2 Infrared sensor 5
3 Antenna connection

Optical digital output S/PDIF

Analogue audio output (Cinch R/L)

DC-IN 5V, 500 mA

4.3.3 Remote control

Mute/silent	26	Programme + /▲
Equaliser/EQ	27	Volume + /▲
SCAN	28	Programme - /▼
Repetition	29	INFO
Random playback*	30	Numeric keys / direct dialling keys
Previous title
Stop
MENU	31	Favourites memory
OK / Selection
Volume - /▲
BACK / Back
Digit input**
On/standby
Sleep timer
Alarm clock 1/2	* Spotify only (Premium)
Without function
Without function	** Press 1x + number key for
Next title	11...20.
Play/pause	Press 2x + number key
Fashion/Source	for 21...30.

5 Preparing the DIGITRADIO 11 IR for operation

5.1 Setting up the appliance

Place the appliance on a firm, secure and horizontal surface. Ensure good ventilation.

Notes:

• Do not place the appliance on soft surfaces such as carpets, blankets or near curtains and wall hangings. The ventilation openings could be covered. This may interrupt the necessary air circulation. This could possibly lead to an appliance fire.
• Please note that the appliance feet may leave coloured marks on certain furniture surfaces. Use protection between your furniture and the appliance.
• Keep the DIGITRADIO 11 IR away from devices that generate strong magnetic fields. Otherwise, reception interference may occur.
• Do not place any heavy objects on the appliance.

52 Align antenna

The number and quality of the stations to be received depends on the reception conditions at the installation site. Excellent reception can be achieved with the throw antenna.

Plug the antenna into the RF IN antenna socket (3) on the back of the DIGITRADIO 11 IR.

i Note:

The exact alignment of the antenna is important, especially in the peripheral areas of DAB+ reception. On the Internet, for example, you can find
"www.dabplus.de" to quickly find the location of the nearest transmitter mast.
- Start the first search at a window in the direction of the transmitter mast. In poor weather conditions, DAB+ reception may only be possible to a limited extent.
- Do not touch the aerial while a station is playing. This can lead to impaired reception and audio dropouts.

5.3 Audio connection to stereo system, active loudspeaker

Connect the DIGITRADIO 11 IR via the analogue audio output (5), e.g. to the AUDIO-IN input of a stereo system or AV amplifier. Use the supplied audio connection cable for this (a special cable may be required, depending on the AV amplifier input).
If your AV amplifier has an optical digital input, you can connect the DIGITRADIO 11 IR to the amplifier via the optical digital output S/PDIF (4).

54 Connecting the power supply unit

WARNING!

Do not touch the mains plug with wet hands, risk of electric shock.

Blow!

ATTENTION!

Lay the mains cable so that nobody can trip over it and the power supply unit can be reached quickly at any time to disconnect the appliance from the mains.

Notes:

• Make sure that the operating voltage matches the local mains voltage before plugging the power supply unit into the wall socket.
• Use a suitable, easily accessible mains connection and avoid using multiple sockets!
• In the event of faults or smoke and odours coming from the housing, disconnect the mains adapter from the socket immediately!
• If the appliance is not to be used for a longer period of time, e.g. before travelling, unplug the mains plug.

  Connect the supplied USB charging cable to the mains adapter and connect it to the socket labelled DC-IN on the back of the DIGITRADIO 11 IR. Then connect the mains adapter to the mains supply.

5.5 Inserting batteries into the remote control

Open the battery compartment on the back of the remote control by sliding it in the direction of the arrow.
Insert the BaGeries (2x AAA 1.5V) into the BaGeries compartment according to the polarity shown in the BaGeries compartment.

Carefully close the assembly compartment lid again so that the retaining tabs of the lid engage in the housing.

Notes:

• To operate the remote control, you need 2x BaG batteries, type Micro 1.5 V, LR03/AAA. Make sure the polarity is correct when inserting the batteries.
• Replace weakening BaGeries in good time.

6 General device functions

6.1 Operating the device with the remote control

You can use the infrared remote control to operate the most important functions of the appliance from the comfort of your seat. Please note the following points when operating the appliance with the remote control:

Point the remote control at the IR receiver (3) on the front of the appliance.
There must be a line of sight between the remote control and the IR receiver.
If the range of the remote control decreases, the BaGeries should be replaced with new ones.

The maximum range is approximately 5 metres in front of the device.

62 Switch on the device

By pressing the On/Standby button (26) on the remote control, you can switch the device on or back to standby.

After switching on for the first time, you must first configure the initial installation wizard. You can find more information on this in chapter "8 Initial setup" on page 34.

6.3 Switch off the device

You can switch the appliance to standby by pressing the On/Standby button (26) on the remote control. The date and time appear on the display.

64 Source selection

Press the MODE button several times until the desired source is shown on the display.

6.5 Setting the volume

Adjust the volume using the VOL +/- buttons on the remote control.

VOL+ - louder

VOL- - quieter.

The set volume is shown on the display using a bar chart.

If the volume is turned down completely or muted with the MUTE button (14), the device switches to standby mode after approx. 15 minutes.

6.6 Mute

You can mute the volume by pressing the MUTE button (14).
This mode is signalled by a corresponding icon in the status bar.

Pressing the MUTE button again switches the volume back on.

6.7 Display

Current source

Channel name, title, artist, additional information, menu, lists

DAB+

11:39

Deutschlandfunk

Deutschlandfunk - Everything that counts

Time of day

Status bar with
WLAN and
DAB+/FM reception
strength,
active alarm
clock,
stereo/mono
etc.

The display may vary depending on the selected function/source. Follow the instructions on the display.

The additional information shown on the display, such as title, artist or broadcast frequency, can be adjusted and scrolled through depending on the source/station using the INFO button.

6.7.1 Call up display screens

By pressing the INFO button (37) several times while playing a source, you can display and switch through some additional information.

6.7.2 Slideshow

Some DAB+ or Internet radio stations transmit additional information such as z. e.g. album cover of the current track, adverts or web data. The size of this "Slideshow" window can be set using the OK button on the remote control or in the menu under [Display settings] > [Picture size].

7 Menu operation

Menu navigation is mainly carried out using the MENU, / , BACK and OK of the remote control.

The device menu (main menu) is divided into the respective submenu of the currently selected source and the system settings. Press the MENU button to open the main menu.

The / buttons on the remote control can be used to navigate through the settings and options. Press the OK button on the remote control to make a selection or activate a function.

An ** marks the current selection.

Press the BACK button (24) to go back one step.

Close the menu: Press the MENU or BACK button several times (depending on which submenu you are in) until the current playback source is displayed again.

Settings are only saved by pressing the OK button. If the BACK button is pressed in the meantime, the settings are not accepted and saved (the MENU button also takes on the function of a "Back" button and the menu is exited).

Functions and buttons to be pressed are described in these operating instructions in feU is shown. Display indications in [square brackets].

Some texts (e.g. menu entries, station information) may be too long to be shown on the display. After a short time, these will then be displayed as a loud text.

8 Initial setup

After switching on the DIGITRADIO 11 IR for the first time, you must first select the operating language and can then start the initial setup wizard.

All settings can also be changed at a later date at any time via the menu.

Use / to select the operating language and confirm with OK.
To start the initial setup wizard, select the [YES] field with / on the remote control and press the OK button.
In the next step, you can select the time format. Select the desired setting [12] or [24] and press the OK button to move to the next step.
Here you can select which source (DAB+, FM or Internet) the DIGITRADIO 11 IR uses to obtain and update the time and date.

If you have selected Update from Internet, you must select the time zone in the next step so that the time is displayed correctly. Then specify whether summer time or winter time is current at the time of setting.

You can now specify whether the DIGITRADIO 11 IR should remain connected to the Internet even in standby mode. This can be advantageous for app control (TechniSat Connect app), for example. However, this is also increases the power consumption in standby mode. Select [Yes] or [No] and press the OK button to move to the next setting.

The Wi-Fi network search then starts and you can set up an Internet connection. Select the Wi-Fi network you know using the / and OK buttons and enter the corresponding password using the keypad that appears (connect without WPS). Then select the OK field and press the OK button. If the password was correct, a connection to this network is now established. Whether

You can recognise that a connection exists by the WLAN signal bar. The status bar of the display. To cancel the entry, select the CANCEL field and press the OK button. If you have made a typing error, you can delete the last letter entered by selecting the DEL field.

While the virtual keyboard is shown on the display, you can navigate using / on the remote control. The / buttons move the highlighting up and down, the / buttons move the highlighting to the right and left.

If the password was correct, [Connected] appears on the display.

After completing the network configuration, confirm the message that the initial setup is complete by pressing the OK button.
You can then select a playback source using the / and OK buttons. can be selected.

9 Internet radio and podcasts

The DIGITRADIO 11 IR is equipped with an Internet radio receiver.

To be able to receive Internet radio stations/stations/podcasts, you need a WLAN router with Internet access.

Press the MODE button until [Internet Radio] or [Podcast] appears on the display.

If you are starting Internet radio operation for the first time without having configured a WLAN connection during the initial setup, you must first set up a WLAN connection. For more information, see chapter "18.1 Internet settings" on page 63.

9.1 Channel list

Press the MENU button and select [Channel list] or [Poscast list]. Press the OK button.

Under Station list, all Internet radio stations are displayed in different categories.

Select a channel using a category/country/genre and press the OK button.

To obtain additional information about the currently playing station, press the INFO button several times (point 6.7.1).

92 Add Internet radio stations to your favourites

The favourites memory can store up to 30 stations.

The saved transmitters are retained even after a power failure.

Set the desired channel.
Press one of the number buttons 0 ... 9 on the remote control and hold it down until [Favourite x saved] appears in the display. The number button 0 is the favourite memory location 10.
Repeat the procedure to save additional channels. Alternatively

and for memory locations 11 ... 30:

Press and hold the FAV button, use the / buttons to select a favourite memory location 1...30 and press the OK button.

9.3 Selecting a favourite station

Briefly press the desired number key 0 ... 9 briefly. If you have not saved a station in the selected programme position, [Favourite empty] appears.

Alternative:

Briefly press the FAV button, use the / buttons to select a favourite memory location 1...30 and press the OK button.

94 删除aprogramme position memory

Simply save a new channel to the relevant programme position.

10 Spotify Connect

Press the MODE button until [Spotify Connect] appears on the display.

An active Internet connection is required for Spotify Connect. If you are starting Spotify Connect for the first time without having configured a Wi-Fi connection during the initial setup, you must first set up a Wi-Fi connection. For more information, see chapter "18.1 Internet settings" on page 63.

Use your smartphone, tablet or computer as a remote control for Spotify. You can find out more at spotify.com/connect.

The Spotify Tokware is subject to driG provider licences, which you can find here: hGp://www.spotify.com/connect/third-party-licenses

11 Amazon Music

Press the MODE button until [Amazon Music] appears on the display.

Amazon Music requires active Internet access. If you are starting Amazon Music for the first time without having configured a Wi-Fi connection during the initial setup, you must first set up a Wi-Fi connection. For more information, see chapter "18.1 Internet settings" on page 63.

You need an Amazon Music Prime subscription (included in Amazon Prime) or an Amazon Music Unlimited subscription to be able to use Amazon Music. Further information about Amazon Prime, Amazon Music Prime or Amazon Music Unlimited, as well as any additional costs, can be found at: hGps://www.amazon.de/amazonprime and hGps://www.amazon.de/music/.

You must also have the TechniSat CONNECT app installed on your smartphone or tablet (available free of charge in the respective app stores).

Open the TechniSat CONNECT app and select the Control function.
Under the SOURCE tab, select > Amazon Music.
Tap on the SEARCH tab. Here you can now log in with your Amazon Prime account.

Favourites storage is limited to 8 playlists.

12 CALM RADIO

Press the MODE button until [CALM RADIO] appears on the display.

CALM RADIO requires active Internet access. If you are starting CALM RADIO for the first time without having configured a WLAN connection during the initial setup, you must first set up a WLAN connection. For more information, see chapter "18.1 Internet settings" on page 63.

You need a CALM RADIO account to use this function.
You can find out more about how it works at hGps://www.calmradio.com.

Select Login and press the OK button. You must then enter the user name and password for your Calm account.
You can then select a music track from various categories and play it by pressing OK.
You can then select a music track from various categories and play it by pressing OK.

13 Classic Radio Select

Favourites storage is limited to 8 playlists.

Press the MODE button until [Classic Radio Select] appears in the display.
An active Internet connection is required for Klassik Radio Select. If you are starting Klassik Radio Select for the first time without having configured a WLAN connection during the initial setup, you must first configure a WLAN connection.
Set up the connection. For more information, see chapter "18.1 Internet settings" on page 63.
You need a Klassik Radio Select account to use this function. You can find out more about how it works at hGps://www.klassikradio.de/select.

Enter the user name (e-mail) and password of your Klassik Radio Select account.
You can then select a music track from various categories and play it by pressing OK. Optionally, you can also create/manage music and playlists at hGps://play.klassikradio.de/.

Favourites storage is limited to 8 playlists.

14 DAB+ radio

14.1 What is DAB+

DAB+ is a new digital format that allows you to listen to crystal-clear sound without noise. Unlike conventional analogue radio stations, DAB+ broadcasts several stations on the same frequency. This is called an ensemble or multiplex. An ensemble is made up of the radio station and several service components or data services, which are broadcast individually by the radio stations. Information e.g. at www.dabplus.de or www.dabplus.ch.

14.2 Switch on DAB+ radio reception

Press the MODE button until [DAB+ Radio] appears on the display.

When DAB+ is started for the first time, a complete station search is carried out. The station list is then displayed (see point 14.4).

14.3 Perform search run

The automatic search scans all DAB Band III channels and thus finds all stations broadcast in the reception area.

Once the search is complete, the first station is played in alphanumeric order.

To perform a complete search, open the menu by pressing the MENU button and select the menu item [Search settings] > [Complete search] using the / and OK buttons.

Alternatively: Press the SCAN button on the remote control or on the device (press and hold the button on the device until the search starts).
The display shows [Search...].

During the search, a progress bar and the number of channels found are displayed.
If no station is found, check the antenna and change the installation location if necessary (point 5.2).

14.3.1 Manual search

This menu item is used to check the reception channels and can be used to align the aerial. If new stations are found on a frequency, these are now also added to the station list.

Press the MENU button and use the / buttons to select the entry [Search setting] > [Manual search] and press the OK button.
Use the / and OK buttons to select a channel (5A to 13F). The signal strength is now shown on the display. If a DAB+ signal is received on a channel -transmitter is received, the ensemble name of the transmitter is displayed. The antenna can now be aligned for maximum signal strength.
Transmitters whose signal strength is below the required minimum signal strength (see point 14.8) do not transmit a sufficient signal. If necessary, align the telescopic aerial as described under point 5.2.

144 Select channel list

Press the P + / or P - / buttons to switch between the available channels.
Alternative:
Open the menu and use the / buttons to select the menu item

[Channel list] and press the OK button.

Depending on the setting under MENU > [Scan settings] > [Change channel], the OK button must then be pressed in the channel list to play the selected channel (option: Change channel > List) or the channel is played automatically (option: Change channel > Channel).

14.5 Saving DAB+ stations

The favourite memory can store up to 30 DAB+ stations.

The saved transmitters are retained even after a power failure.

Play the desired station.
Press one of the number buttons 0 ... 9 on the remote control and hold it down until [Favourite x saved] appears on the display. The number button 0 is the favourite memory location 10.

Saving additional transmitters: Repeat the process.
Alternatively and for memory locations 11 ... 30:
Press and hold the FAV button, use the / buttons to select a favourite memory location 1...30 and press the OK button.

14.6 Selecting the programmed stations

Briefly press the desired number key 0 ... 9 briefly. If you have not saved a station in the selected programme position, [Favourite empty] appears.
Alternative:
Briefly press the FAV button, use the / buttons to select a favourite memory location 1...30 and press the OK button.

14.7 Deleting a programme position memory

Save the new channel to the relevant programme position.

14.8

Signal strength

Press the INFO button several times. The signal strength is displayed.
The level of the signal strength bar shows the current level:

Transmitters whose level is below the required minimum signal strength do not transmit a sufficient signal. If necessary, align the antenna as described under point

5.2 described from.

Pressing the INFO button several times switches through various information, e.g. programme type, multiplex name, frequency, signal error rate, data bit rate,

programme format, date.

14.9 Dynamic Label Plus

If supported by the programme provider, the Dynamic Label Plus service allows, for example, the name of the current programme or the title and artist to be displayed additionally.

14.10 Set DRC

The compression rate compensates for dynamic fluctuations and the associated volume variations.

Press the MENU button and use the / buttons to select the entry [Sound settings] > [DRC].
Press the OK button.
Use / to select the compression rate:

DRC high -High compression

DRC low -Low compression

DRC off -compression switched off.

Confirm by pressing the OK button.

14.11 Delete inactive stations

Press the MENU button and use the / buttons to select the entry [Search setting] > [Remove inactive channels].
Press the OK button.

You will be asked [Delete] whether the inactive transmitters should be deleted.

Use / to select the [Yes] entry and confirm by pressing the OK button.

15 FM radio

15.1 Switch on FM radio mode

Press the MODE button until [FM radio] appears on the display. When switching on for the first time, the frequency 87.5 MHz is set.

If you have already set or saved a station, the radio will play the last station set.

The station name appears for RDS stations.

Align the aerial to improve reception.

15.2 FM reception with RDS information

RDS is a procedure for transmitting additional information about FM stations. Broadcasters with RDS transmit their station name or programme type, for example. This is shown on the display.

The device can receive RDS information:

RT (radio text),

PS (station name),

PTY (programme type)

represent.

15.3 Automatic search

Press and hold the P + / or P - / buttons for longer (2 to 3 seconds) to automatically search for the next station with sufficient signal.
Alternatively, you can also press the OK or SCAN button (press and hold the button on the device until the search starts).

If an FM station with a sufficiently strong signal is found the search stops and the station is played. If an RDS station is received, the station name and, if applicable, the radio text will appear.

To tune to weaker stations, please use the manual station search.

15.4 Set the transmission frequency manually

Briefly press the P + / or P - / buttons several times to set the desired station or frequency.

The display shows the frequency in steps of 0.05MHz

15.5 Searchsetting

The sensitivity of the search run can be set in this menu item.

Press the MENU button and use the / buttons to select the entry [Search setting] and press the OK button.

Select whether the search should only stop for strong channels [Only strong channels?] ([Yes]) or for all channels (also for weak channels > [No]).

If [No] is set, the automatic search stops at every available station. This can result in weak stations being played back with noise.

15.6 Audio settings

Press the MENU button and use the / buttons to select the entry [Sound settings] > [Audio output] and press the OK button.
Use / to select [Stereo possible] or [Mono only] to play back in stereo or only in mono sound when FM reception is weak.
Confirm by pressing the OK button.

15.7 Saving FM stations

The favourites memory can store up to 30 FM stations.

The saved transmitters are retained even after a power failure.

Set the desired channel.
Press one of the number buttons 0 ... 9 on the remote control and hold it down until [Favourite x saved] appears in the display.
Saving additional transmitters: Repeat the process.

Alternatively:

Press and hold the FAV button, use the / buttons to select a favourite memory location 1...30 and press the OK button.

15.8 Selecting the programmed stations

Briefly press the desired number key 0 ... 9 briefly. If you have not saved a station in the selected programme position, [Favourite empty] appears.

Alternative:

Briefly press the FAV button, use the / buttons to select a favourite memory location 1...30 and press the OK button.

15.9 Deleting a programme position memory

Save the new channel to the relevant programme position.

16 Bluetooth audio streaming

In Bluetooth mode, you can play music from a connected smartphone or tablet via the DIGITRADIO 11 IR. To do this, both devices must first be "paired" with each other.

16.1 Activate Bluetooth mode

Switch to Bluetooth mode by pressing the MODE button.
The display shows [Bluetooth Audio].

When switching on for the first time, an external device (smartphone/tablet) must first be paired.

If an external device that is within range has already been paired, the connection is established automatically. Depending on the connected device, music playback may start automatically.

16.2

External device Pairing

Start Bluetooth mode as described under point 16.1.
Bluetooth] and [Pair BiUe] appear on the display.
Now start the search for n e a r b y Bluetooth devices on your external device. You may need to activate the Bluetooth function on your external device first.

To activate the Bluetooth function on your external device and perform a search, please refer to the operating instructions for your external device.

During the pairing process, both devices should be within 10cm of each other.

Select the list of Bluetooth devices found on your music player.
Search for the DIGITRADIO 11 IR entry in the list and select it. If you are prompted to enter a PIN, enter "0000" (4x zero).
If the pairing is successful, [Connected] appears on the display.

16.3 Play music

Select a music track on your music player and play it.

Depending on the Bluetooth protocol of your external device, you can control the music playback using the playback buttons on the remote control.

Play/Pause - button

Next title button

Previous title- 2x button

Title from beginning - key

Volume

-Volume + / - buttons

i Alternatively, you can use the playback controls of the music app on your external device.
If there is no playback or no device is paired, the DIGITRADIO 11 IR switches to standby mode after approx. 15 minutes.

16.4 Revive coupling

To cancel an active pairing, select MENU > [Disconnect] and press the OK button. Note that the device to be unpaired must be connected to the DIGITRADIO 11 IR if you want to unpair it. You can then pair a new device as described in section 16.2.

Alternatively, you can also set up the pairing on your external device. Follow the instructions in the operating instructions for your external device.

17 Further functions

17.1 Sleep timer

The sleep timer automatically switches the DIGITRADIO 11 IR to standby after the set time.

Press the MENU button and use the / buttons to select the entry [Sleep timer].
Press the OK button.
Use / to select a time period after which the DIGITRADIO 11 IR should switch off. You can choose between Off, 5, 10, 15, 30, 60 and 90 minutes.
Press the OK button to accept the setting.
Alternatively, you can also use the SLEEP button Press it several times to set the switch-off time and press OK to confirm.

A moon symbol appears on the display with the remaining time until the DIGITRADIO 11 IR is switched off.

172 Alarm clock

The alarm clock switches the DIGITRADIO 11 IR on at the set alarm time. Two alarm times can be programmed. The programming of alarm clock 1 is described below as an example.

17.2.1 Set up alarm clock

You can only operate the alarm function once the correct time has been set. Depending on the configuration, this is done automatically or must be set manually. The time can be updated either manually, via DAB+/ FM or via the Internet. Further information on this can be found in chapter 18.2.

Press the Alarm clock button (32) on the remote control.
The overview of the set alarm times appears on the display.
Use the / buttons to select one of the alarm clock memories that you would like to set and press the OK button.
The individual alarm clock parameters can then be set one after the other. Press the OK button to open an alarm clock parameter and use the / buttons to change it.

Alarm clock

Switch the alarm clock [On] or [Off].

Repeat (Repeat)

Here you can choose between Daily (every day of the week), Once, Weekdays (Mon. - Fri.) or Weekends (Sat. and Sun.). Press the OK button to accept the setting.

Time of day

Here you can enter the alarm time and, if necessary, the date.

First select the hours using the / buttons and press the OK button to accept.

Then enter the minutes. Press the OK button to accept these as well.

If you have selected [Once] under Repeat, you must enter the date as well as the time.

Source

The source is then entered. SUMMER, Internet radio, DAB+ or FM are available. Press the OK button to accept the setting.

Favourite

If you have selected Internet radio, DAB+ or FM, you can then specify whether you want to be woken up with the last station you listened to or with one from your favourites list.

Duration

Then enter the duration. Accept the entry by pressing the OK button.

Volume

Finally, you can set the alarm tone volume using the / buttons.

Press the OK button to accept.

Save

Press the OK button to save the alarm clock setting.

When the alarm clock is active, a bell symbol appears on the display.

17.2.2 Switch off alarm clock after alarm

Press the On/Standby button on the remote control to switch off the alarm clock.
If you want to activate the snooze function, press the OK button several times while the alarm clock is active.
You can quickly activate or deactivate saved alarm clocks by selecting the relevant alarm clock in the alarm clock overview and then pressing and holding the alarm clock button on the remote control.

17.3 Equaliser

You can use the equaliser to adjust the sound to suit your preferences.

Press the MENU button and use the / buttons to select the entry [Sound settings] > [Equaliser].
Press the OK button.

Alternatively:

Press the EQ button (15) on the remote control.

Use the / buttons to select either [Treble] to adjust the treble or [Bass] to adjust the bass. Then press the OK button.
You can now use the / buttons to set a value between -14 and +14 dB. Press the OK button to accept the setting.

18 System settings

All settings described in this section apply equally to all sources.

18.1 Internet settings

You can call up and configure the network settings via MENU > [System settings] > [Internet settings].

18.1.1 Connection via WLAN

To configure the network connection via WLAN, you have the option of using the network wizard or doing it manually.

18.1.1.1 Configuration via network wizard

Select [Wizard] to start it.

The network wizard will now search for all Wi-Fi networks within range and display them to you.

Then select your Wi-Fi network using the / and OK buttons.

You can now choose whether you want to use the WPS function or enter your WLAN password manually.

If you want to use the WPS function, first start it on your router according to its operating instructions and then select [Connect WPS with button] in the network wizard.

Please note the display messages. The connection process is usually completed after a few seconds and the Wi-Fi connection can now be used. Alternatively, the [Connect WPS with PIN] function can also be used if this function is supported by the router.

If you want to enter your WLAN password manually or your router does not support the WPS function, select [Connect without WPS].

Then enter your WLAN password using the virtual keyboard that appears and confirm by selecting OK.

To cancel the entry, select the ABBR. field and press

the OK button. If you have made a typing error, you can delete the last letter entered by selecting the DEL field.

While the virtual keyboard is shown on the display, you can navigate using / on the remote control. The / buttons move the highlighting up and down, the / buttons move the highlighting to the right and left.

The password entered will now be checked. This process is usually completed after a few seconds and the WLAN connection can then be used.
If the password was correct, [Connected] appears and the WLAN signal bar appears in the status bar of the display.

18.1.1.2 Configuration via WPS push function

This establishes a direct connection to the router. It is not necessary to select and/or enter the Wi-Fi network (SSID) and password.

Select [WLAN WPS push button] and press the OK button to start the connection process.
Then start the WPS function on your router according to its operating instructions.

18.1.1.3 Manual configuration

Select [Set manually] and then [Wireless] to start the manual configuration.
Now select whether you want your router to retrieve the IP address, gateway etc. automatically (DHCP active) or enter them manually (DHCP inactive).

Please note that the automatic retrieval of the IP address, gateway and subnet mask only works if the DHCP function is activated in your router.

Enter the IP address, subnet mask, gateway address, primary DNS and, if necessary, secondary DNS one after the other using the arrow buttons on the remote control. Confirm each set value with the OK button.
Now enter the name (SSID) of your WLAN network using the virtual keyboard and confirm by selecting OK.
Select whether your WLAN network should use no encryption, WEP or WPA/WPA2 is encrypted and confirm the following point.
Finally, use the virtual keyboard to enter your WLAN password and confirm by selecting OK to start the WLAN connection.

Start the connection process. As a rule, the WLAN connection can be used after a few seconds.

18.1.1.4 Show settings

Select [Network info] to display the current network settings.

18.1.1.5 TechniSat Connect PIN

You can control the DIGITRADIO 11 IR with the TechniSat CONNECT App. To do this, the PIN of the DIGITRADIO 11 IR must be entered in the app. You can change the PIN here as follows.

Enter a 4-digit PIN under [TechniSat CONNECT PIN] and press the OK button to save.

18.1.1.6 Delete network profile

Use the menu items [Remove inactive networks] or [Remove all networks] to delete an existing connection to a WLAN network or all configured networks and to delete the settings made. If you want to reconnect the device to this network, you must make all the settings again.

18.1.1.7 WLAN connection in standby

Under [WLAN active in standby], select whether the WLAN connection should be maintained (even in standby mode) [YES] or not [NO].

Please note that this function must remain switched on for unrestricted and smooth operation and control via the TechniSat CONNECT app. The TechniSat CONNECT app can be downloaded from the app stores of your smartphone.

If [NO] is selected, the WLAN connection is only established if it is needed for a playback source (e.g. Internet radio).

18.2 Time and date settings

18.2.1 Set time & date manually

Depending on the time update setting (point 18.2.2), you must set the time and date manually.

Press the MENU button and use the / buttons to select the entry [System settings] > [Time & date].
Press the OK button.

Use the / buttons to select [Set] and press OK.
The first digits (day) of the date flash and can be changed using the / buttons.

The button increases the value, the button decreases the value.

Press the OK button to accept the setting.
The next digits (month) of the date then flash and can also be changed as described above.
After each additional setting, press the OK button to skip to the next setting.
Proceed as described above for the time.
After all settings have been made and OK has been pressed for the last time, [Time saved] appears on the display.

18.2.2 Time update

In the Synchronise submenu, you can specify whether the time should be updated automatically via the Internet, DAB+ or FM (FM) or whether you want to enter it manually (section 18.2.1).

Press the MENU button and use the / buttons to select [System settings] > [Time & date] > [Synchronise] and press OK.
Use the / buttons to select the following options:

[Update from Internet] (update via the Internet connection)

[Update DAB+] (update only via DAB+)

[Update FM] (update only via FM)

[No update] (time/date must be entered manually, see point 18.2.1).

Press the OK button to save the setting.

18.2.3 Setting the time format

Under Set format you can activate the 12 or 24 hour format.

Press the MENU button and use the / buttons to select the entry [System settings] > [Time & date] > [Set format] and

press OK.

Use / to select one of the following options:
[24 hours]
[12 hours]
Press the OK button to save.

18.2.4 Time zone and daylight saving time

For the correct display of the time, which is synchronised via an Internet connection, it is important to also set the current time zone as well as summer or winter time. This menu item is only active if time synchronisation via the Internet has been selected.

Press the MENU button and use the / buttons to select the entry [System settings] > [Time & date] > [Time zone] and press OK.
Use / to select a time zone and press the OK button to accept the setting.
Then select > [Summer time] > [Yes] or [No] (winter time) and press the OK button.

18.3 Display settings

In this menu, you can configure the display brightness, the slideshow image size and the additional information.

Press the MENU button and select the [Display settings] entry and press OK.

Display

Here you can select the additional display information (depending on the currently selected source).

Use / to select the [Display] entry. Select an additional info item and press the OK button to save. The additional information can also be switched through in normal operation (no menu displays) using the INFO button.

Image size

Here you can set the default size of the slideshow image.

Use / to select the [Image size] entry. You can choose between Full screen and Small. Press the OK button to save.

Lighting

The display brightness can be regulated separately for operation and standby.

Use / to select the [Lighting] entry.

[Operation] controls the brightness when switched on. You can choose between the brightness levels [High], [Medium] and [Low]. Use / to select a brightness level and press OK to save.

[Standby] controls the brightness in standby mode. You can choose between the brightness levels [High], [Medium] and [Low]. Use the / buttons to select a brightness level and press OK to save.

[Auto-Dim] automatically dims the display to a lower brightness value than selected under [Operation] after the set time (without operating the radio). If the [Off] option is selected, the display lights up permanently with the brightness selected under the [Operation] function. Press OK to save a setting.

18.4 Language

Press the MENU button and use the / buttons to select the entry [System settings] > [Language] and press OK.
Use / to select one of the available languages and confirm your selection by pressing the OK button.

18.5 Factory setting

If you change the location of the device, e.g. if you move house, you may no longer be able to receive the saved channels. In this case, you can delete all saved channels by resetting to factory settings and then start a new channel search.

Press the MENU button and use the / buttons to select the entry [System settings] > [Factory settings] and press OK.
Use / to select the [Yes] entry to perform the factory settings and press OK.

All previously saved channels and settings are deleted. The device is now in the factory settings.

The display shows [Restart...].

You can then start the initial setup wizard. See chapter "8 Initial setup" on page 34.

18.6 System info

You can query the currently installed Sokware versions under System info.

Press the MENU button and use the / buttons to select the entry [System settings] > [System info] and press OK.

18.7 SWupdate

Software updates may be provided from time to time, which may contain improvements or bug fixes. The DIGITRADIO 11 IR is therefore always up to date.

Press the MENU button and use the / buttons to select the entry [System settings] > [SW update] and press OK.
Select [Auto-Update] if you want the DIGITRADIO 11 IR to search periodically for new software versions.
Select [Check now] if you want to check now whether a newer Sokware version is available.

If a Sokware update is found, follow the instructions on the display.

To find and download software updates, the DIGITRADIO 11 IR must be connected to the Internet. Do not switch off the DIGITRADIO 11 IR during the update process!

18.8 Initial setup

The initial setup wizard can be called up again here. For more information, see section "8 Initial setup" on page 34.

Press the MENU button and use the / buttons to select the entry [System settings] > [Initial setup] and press OK.
Then start by setting the system language.

18.9 Data protection

Under this point you will find data protection information.

Press the MENU button and use the / buttons to select the entry [System settings] > [Privacy] and press OK.

19 Cleaning

WARNING!

To avoid the risk of electric shock, do not clean the appliance with a wet cloth or under running water. Disconnect the mains plug before cleaning!

• Do not use scouring pads, scouring powder or solvents such as alcohol or petrol.
• Do not use any of the following substances: Saltwater, insecticide ammonia, chlorinated or acidic solvents (ammonia), scouring powder.
  Clean the housing with a soft cloth moistened with water.

Do not use solvents, spirits, thinners, etc.; they could damage the surface of the appliance.

Only clean the display with a soft cotton cloth. If necessary, use a cotton cloth with small amounts of non-alkaline, diluted water- or alcohol-based soapy water.
- Rub the cotton cloth gently over the surface until it is completely dry.

20 Eliminate errors

If the device does not work as intended, check it using the following table.

Symptom	Possible cause/remedy
Device cannot be switched on.	The device is not supplied with power. Connect the mains cable/power supply unit correctly to the socket. Check that the local power supply matches the power supply printed on the power supply unit.
No sound can be heard.	Increase the volume.
The display does not switch on.	Disconnect the appliance from the mains and reapply power.
Reception via DAB+/FM is poor.	Change the position of the antenna or the DIGITRADIO 11 IR.
Symptom	Possible cause/remedy
Device cannot be operated.	Disconnect the appliance from the mains and reapply power.
No WLAN connection possible	Restart the WLAN wizard and check that the password has been entered correctly.
	Out of range of WLAN reception. Reduce the range to the WLAN router
	New WLAN devices may not be authorised. Check the configuration of your WLAN router.
Symptom	Possible cause/remedy
Device switches off automatically.	Depending on the playback mode, the device automatically switches to standby mode if there is no playback, the volume has been turned down and no operation has taken place for 15 minutes.
Poor Bluetooth connection and dropouts	Do not exceed the maximum range of 10m via Bluetooth.
The remote control does not work.	BaGeria inserted incorrectly or weak. Check the polarity. Change the BaGeries.
	IR connection interrupted. Remove any objects that are between the remote control and the appliance.
	Distance too large. Max. Distance to the device: approx. 4 metres
No sound on the external AV amplifier.	Is the external device connected correctly?
	Is AUX or Line-IN selected as the input source?
	Has the output volume been set correctly on the external AV amplifier?

If you are still unable to rectify the fault after the checks described, please contact the technical hotline.

21 Technical data / manufacturer information

Technical changes and errors excepted.

Reception paths	DAB+, FM, Internet, USB, service provider
Power supply Power supply unit	DC 5 V, 1 A via external power supply unit supplied
Frequencies	FM: 87.5-108 MHz DAB+: 174-240 MHz Bluetooth: 2.402-2.480 GHz Transmission power: Class 2/max. 4 dBm WLAN: 2400 MHz - 2483 MHz Transmission power: max. 100 mW 5150 MHz - 5350 MHz Transmission power: max. 100 mW 5470 MHz - 5725 MHz Transmission power: max. 100 mW 5725 MHz - 5850 MHz Transmission power: max. 25 mW
Display	3.5" TFT colour 480x320 pixel RGB
Power consumption	in operation max: 1.5 W standby: 0.5 W Standby with network: 0.7 W
Consumption minimisation (automatic switch-off after 15 minutes in standby)	If no signal is played back: DAB+, Bluetooth (if not connected). When the volume is turned down: DAB+, FM, Bluetooth
Weight (g)	157
Ambient conditions Operation	Temperature: 5 °C - 35 °C Relative hatch humidity: 5% to 75% (non-condensing)
Dimensions (WxHxD) mm	112 x 95 x 60

Technical data of the supplied power supply unit

Manufacturer	TechniSat Digital GmbH, Julius-Saxler-Straße 3, D-54550 Daun
Model identifier	YD-BA0500100EU-6C
Input voltage	AC 230 V (± 10 %)
Input alternating current frequency	50 Hz
Output voltage	DC 5.0 V
Output current	1,0 A
Output power	5,0 W
Consistent efficiency in operation	74,6 %
Power consumption at no load	0,07 W

22 Disposal instructions

The packaging of your appliance consists exclusively of recyclable materials. Please sort them accordingly and return them to the "Dual System". This product is labelled in accordance with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) and must not be disposed of with normal household waste at the end of its service life, but must be handed in at a collection point for the recycling of electrical and electronic equipment.

The symbol on the product, the instructions for use or the packaging indicates this.

The materials are recyclable according to their labelling. By reusing, material recycling or other forms of recycling old appliances, you are making an important contribution to protecting our environment.

Please ask your local authority for the responsible disposal centre. Ensure that empty batteries and electronic scrap are not disposed of with household waste, but disposed of properly (take back by specialist retailers, hazardous waste).

Important note on the disposal of batteries/rechargeable batteries:

Batteries/rechargeable batteries may contain toxic substances that are harmful to the environment and must be disposed of separately from the device. For the chemical composition, please refer to the technical data or the imprint on the battery.

It is therefore essential that you dispose of BaGeria/rechargeable batteries in accordance with the applicable legal regulations. Never dispose of batteries in normal household waste. You can dispose of used batteries free of charge at your specialist dealer or at special disposal centres.

For products with a battery compartment, you can remove the battery directly. If batteries are permanently installed, do not under any circumstances attempt to remove them yourself. In this case, contact the appropriate specialist personnel, e.g. a waste disposal company.

We hereby advise you to delete all personal data stored on the device on your own responsibility before disposing of the device.

Everything about your TechniSat product in an app.

16 Streaming audioBluetooth. 54

14.9 Dynamic Label Plus

Lecture/Pause - Bouton

3.1 Service-instructions

De wekker [Aan] of [Uit] zetten.

Herhalen (Repeat)