ROWENTA XForce Flex Aqua 14.60 RH9990 - Vacuum Cleaner

XForce Flex Aqua 14.60 RH9990 - Vacuum Cleaner ROWENTA - Free user manual and instructions

Find the device manual for free XForce Flex Aqua 14.60 RH9990 ROWENTA in PDF.

📄 68 pages English EN Download 💬 AI Question 14 questions ⚙️ Specs
Notice ROWENTA XForce Flex Aqua 14.60 RH9990 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Cordless stick vacuum
Brand Rowenta
Model XForce Flex Aqua 14.60 RH9990
Power supply Rechargeable lithium-ion battery, mains charger included
Suction modes ECO (economy) and BOOST (maximum power)
Flexibility Flexible hose for vacuuming under furniture
Conversion Converts into a hand vacuum
Suction head Motorized power brush for all floor types
Dustbin capacity 0.5 L (approx)
Motor filter Washable with water, do not put in dishwasher
Dustbin cleaning Regular emptying and cleaning recommended
Thermal safety Automatic shut-off in case of overheating
Battery Lithium-ion, removable only by a professional
Charger Only the model supplied by the manufacturer
Warranty Use of a universal charger voids the warranty
Usage Household use only
Standards Complies with European standards (CE marking)
Disposal Do not throw away with household waste, take to an approved center

Frequently Asked Questions - XForce Flex Aqua 14.60 RH9990 ROWENTA

Why does the charger heat up?
This is normal. The vacuum can be left plugged in permanently without risk.
What to do if the vacuum does not charge while the charger is plugged in?
Check that the charger is properly connected to the appliance. If the problem persists, contact an Approved Service Center to replace the charger.
Why does the vacuum stop during use with a quickly flashing light?
The appliance may be overheating. Turn it off and let it cool for at least 1 hour.
What to do if suction is weak or makes a whistling noise?
Check that the dustbin is not full, the tube and hose are not blocked, and the motor filter is not clogged. Clean or replace if necessary.
How to clean the motor filter?
The motor filter is washable with clean water. Do not use a dishwasher. Let it dry completely before putting it back.
The power brush makes an abnormal noise or works less well, what to do?
Stop the vacuum and check that the rotating brush is not obstructed by hair or debris. Clean it. If the brush is worn, contact an Approved Service Center.
The red LED flashes during use, why?
This may indicate that the brush is blocked or the battery is too hot. Turn off the appliance, remove the obstruction or let it cool for 30 minutes. If the problem persists, replace the battery.
Can I use a non-original replacement battery?
No, use only genuine Rowenta spare parts to avoid any danger and preserve the warranty.
How to maintain the vacuum?
Empty and clean the dustbin after each use. Clean the motor filter regularly. Check and clean the rotating brush. Refer to the manual for more details.
Where to dispose of the vacuum at end of life?
Do not throw it away with household waste. Take it to a collection center or an Approved Service Center. Remove the battery before disposal and recycle it according to local regulations.

User questions about XForce Flex Aqua 14.60 RH9990 ROWENTA

4 questions about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

Why is there water left on the floor after a wet cleaning with the ROWENTA XForce Flex Aqua 14.60 RH9990?
Frequently Asked Questions - 08/05/2026
Response Notice-Facile

The ROWENTA XForce Flex Aqua 14.60 RH9990 is a 2-in-1 cordless vacuum cleaner with wet cleaning function. If water remains on the floor after use, several factors may be responsible:

  • Too fast passage speed - With a suction power of 150 AW, the device needs time to suck up the water. Reduce your passage speed for more effective cleaning.
  • Too high water flow - Adjust the water flow control of the device to decrease the amount of water distributed. A lower flow makes suction easier.
  • Type of floor - Smooth surfaces like tiles or glossy parquet do not naturally retain water. Make a second pass in dry mode only to eliminate residual moisture.
  • Condition of the cleaning pad - Check that the cleaning pad is not too soaked or dirty. If necessary, rinse it with clear water.
  • Water tank level - The clean water tank has a capacity of 0.9L. Do not fill it beyond the maximum fill line, as this may reduce the effectiveness of wet cleaning.

Important: According to the manual, this device is not intended to vacuum up actually wet surfaces or liquids. Use the wet function according to the instructions to preserve the motor and battery.

Respond (be the first)
Why is there water left on the floor after wet cleaning with the ROWENTA XForce Flex Aqua 14.60 RH9990?
Frequently Asked Questions - 08/05/2026
Response Notice-Facile

When using the wet cleaning function on your ROWENTA XForce Flex Aqua 14.60 RH9990, several factors can explain the presence of persistent water on the floor:

Moving too quickly: If you move quickly across the floor, the device does not have enough time to reabsorb the water it just sprayed. Slow down your movements and maintain a steady pace to allow the system to properly dry the area. Slow and methodical passes will allow for better absorption.

Incorrect water flow setting: A flow rate that is too high sprays much more water than the device can reabsorb. Check the water flow setting on your machine and reduce it if necessary. Start with a minimum flow and gradually increase it to find the balance between effective cleaning and optimal drying.

Condition of the cleaning pad or microfiber: If the microfiber used for wet cleaning is too saturated with water or dirty, it cannot absorb properly. Rinse the cleaning pad regularly between passes or replace it if it is very worn. A clean and well-wrung accessory is much more effective.

Type of floor and multiple passes: Smooth and non-porous floors like tiles or varnished wood do not naturally absorb water. For these surfaces, make a second pass in dry mode only (without spraying) to vacuum up any remaining water residues. On porous floors, slightly increase the flow for more efficiency.

Overfilled water tank: A tank filled to the brim can disrupt the spraying pressure and reabsorption. Only fill the water tank up to the maximum limit indicated, leaving free space at the top to ensure optimal operation of the device.

Respond (be the first)
What should I do if I vacuumed a liquid with the ROWENTA XForce Flex Aqua 14.60 RH9990 and the vacuum cleaner no longer works?
Frequently Asked Questions - 29/04/2026
Response Notice-Facile

The ROWENTA XForce Flex Aqua 14.60 RH9990 is not designed to vacuum liquids, despite its name. Vacuuming water or any other liquid can severely damage the device, particularly its motor and battery.

Why doesn't the vacuum cleaner work anymore after vacuuming a liquid?

  • Water may have entered the motor, causing a short circuit or electrical failure.
  • The lithium-ion battery risks short-circuiting, overheating, or even catching fire if it has been wet.

What to do immediately?

  1. Do not attempt to turn the device back on to avoid any electrical or fire risk.
  2. Disconnect the battery if it is removable to cut off any power supply.
  3. Allow the vacuum cleaner to dry completely in the open air, away from any heat source, for at least 48 hours.
  4. Contact an authorized ROWENTA service center for inspection and possible repair. Do not attempt to repair the device yourself.

These precautions are essential to ensure your safety and prevent further damage.

Respond (be the first)
What does error code E3 mean on the ROWENTA XForce Flex Aqua 14.60 RH9990 vacuum cleaner and how can it be resolved?
Frequently Asked Questions - 11/03/2026
Response Notice-Facile

The error code E3 on the ROWENTA XForce Flex Aqua 14.60 RH9990 vacuum cleaner indicates a motor fault. According to Rowenta's official diagnosis, this code means that the motor needs to be replaced for the device to function properly.

Before proceeding with the motor replacement, perform these preliminary checks to eliminate common causes that may trigger this error:

  • Clean the filters: Remove the two filters from the device and rinse them under running water. The foam filter must dry completely for at least 24 hours before reinstallation. If the filters are worn or damaged, replace them with new compatible filters.
  • Check the positioning of the filters: Ensure that the filters are correctly positioned and properly inserted into the compartment, as improper placement can trigger the error code.
  • Clear the ducts: Inspect the inlet tube and all air ducts to remove any blockages or debris that could hinder airflow.
  • Test without filters: Start the device without the filters and without the dust container. If the E3 code disappears, this confirms that the problem comes from clogged filters or a dirty inlet tube.

If after these preliminary steps the error code E3 persists, the motor must be replaced. Rowenta offers two options: either perform the motor replacement yourself by following the official tutorial provided by the manufacturer, or use Rowenta's flat-rate repair service by contacting an authorized technical center for professional replacement.

Respond (be the first)

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual XForce Flex Aqua 14.60 RH9990 - ROWENTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XForce Flex Aqua 14.60 RH9990 by ROWENTA.

USER MANUAL XForce Flex Aqua 14.60 RH9990 ROWENTA

Read the safety instructions first before using your product and keep them in a safe place for future reference. For your safety, this appliance complies with all existing standards and regulations.

  • This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
  • Read these safety tips carefully. The manufacturer shall not be held liable for improper use or failure to comply with these instructions.
  • Your vacuum cleaner is an electrical appliance: it should be used in normal operating conditions.
  • Do not use the appliance if it has been dropped and there is visible damage to it, or if it fails to function normally. In this case do not open the appliance, but contact Customer Support or an approved Service Centre.
  • Repairs must only be carried out by specialists using original spare parts: it may be dangerous for users to try to repair appliances themselves. Use only guaranteed original spare parts (filters, batteries, etc.).
  • Warning: [Use only with - designation - charger]
    WARNING: To recharge the battery, please use only the power unit (charger) and its wall-mount base included with the appliance (page 134).
    • Please remove the battery before discarding it.
  • Please ensure that the appliance is unplugged before taking out the battery.
  • Please ensure the battery is disposed of safely.
  • The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged or does not work, the transformer shall be scrapped: do not use any detachable power unit (charger) other than the model provided by the manufacturer and contact Customer Support or your nearest approved Service Centre (use of a universal detachable power unit (charger) voids the guarantee).

If the pins of the plug parts are damaged, the plug-in power supply shall be scrapped.

  • Never pull the electric cord to disconnect the detachable power unit (charger).
    • Always switch off the appliance before maintenance or cleaning.
  • Keep hair, loose clothing, fingers, and other body parts away from the appliance's openings and moving parts, especially the rotating brush. Don't direct the tube, the hose or the accessories towards your eyes or ears and keep away from your mouth.
    • Always turn off the appliance before connecting or disconnecting the motorised brush.
  • Do not touch the rotating parts without stopping and disconnecting the appliance.
  • Do not vacuum wet surfaces, water or any type of liquids, hot substances, super smooth substances (plaster, cement, ashes, etc.), large sharp items of debris (glass), hazardous products (solvents, abrasives, etc.), aggressive products (acids, cleaning products, etc.), inflammable and explosive products (oil or alcohol based).
  • Never immerse the appliance in water or any other liquid; do not spill water on the appliance and do not store it outside.
  • For product start-up, charging, cleaning and maintenance, please refer to the user guide.
  • For countries subject to EU regulations (cc marking): This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or who lack experience and knowledge if they have been given supervision or instruction concerning safe use and understand the hazards involved. Children should not be allowed to play with the appliance. Children should not clean or perform maintenance on the appliance unless they are supervised by a responsible adult. Keep the appliance and its charger out of the reach of children under 8 years old.

  • For other countries not subject to EU regulations: This appliance is not designed for use by people (including children) with reduced physical, sensory or mental capabilities or by people with no prior knowledge or experience, unless they have had supervision or previous instructions relating to the use of the appliance, from a person responsible for their safety. Children must be supervised to ensure that they do not play with the appliance.

  • Keep the appliance away from children.
    • In case of short vacuum breaks, for safety reasons do not place the product in an unstable position (in particular by resting on a wall, on a table or on a chair backrest).
  • Store the vacuum cleaner in a secure place (see user's guide). Store the product on its charging base*.

PLEASE READ BEFORE USE

• The handheld vacuum cleaner is the base of the product. It can be transformed into a handstick vacuum cleaner by adding the tube and the head.
- Ensure that the voltage indicated on the rating plate of your vacuum cleaner's charger is the same as your power supply voltage. Any connection error could cause irreversible damage to the product and invalidate the guarantee.
• The vacuum cleaner should always be put back on charge after use to ensure that it is always available with a fully charged battery and with optimal performances.
• However, it is best to unplug it in the event of prolonged absence (holidays, etc), in which case, there may be a decrease in autonomy because of self-discharging.

- Do not vacuum large items that may clog and damage the air inlet.

Depending on model:

- Do not use the power-brush on deep pile carpet, animal hair or fringes.

- Switch to "Min/ECO" to vacuum thick or delicate carpets and rugs and fragile surfaces. Note: check regularly that the nozzle wheels are clean.

- Switch to "BOOST" for optimum performance on all types of very dirty floors. Note: If the appliance sticks to the surface too much, switch back to "Min/ECO".

- Do not use your vacuum without a motor protection filter.

- Do not wash the dust collector components or the motor protection filter in a dishwasher.

BATTERY SAFETY INSTRUCTIONS

- This unit contains batteries (Lithium Ion) which for safety reasons are only accessible by a professional repairer. When the battery is no longer able to hold the charge, the battery pack (Lithium Ion) should be removed. To replace the batteries, contact your

nearest Approved Service Centre. Do not replace a block of rechargeable batteries with non-rechargeable batteries. To change the batteries, please contact an Approved Services Centre.

- The batteries are designed for indoor use only. Never immerse them in water. The batteries must be handled with care. Do not put batteries in your mouth. Do not let batteries touch other metal objects (rings, nails, screws, etc). You must take care not to create short circuits in the batteries by inserting metal objects at their ends. If a short circuit occurs, the battery temperature may rise dangerously and can cause serious burns or even catch fire. If the batteries leak and in case of contact, do not rub your eyes or any mucous membranes. Wash your hands and rinse your eyes with clean water. If the discomfort persists, consult your doctor.

- WARNING - The battery used in this appliance may present risk of fire or chemical burn if used incorrectly. It should not be disassembled, short-circuited or stored at < 0^ and >45^ or incinerated. Keep out of the reach of children. Do not disassemble it or throw it in fire.

- If the appliance is to be stored unused for a long period, the batteries should be removed.

ENVIRONMENT

In accordance with existing regulation, any end-of-life appliances must be taken to an approved Service Centre which will take responsibility for managing their disposal.

Let's help protect the environment.

ROWENTA XForce Flex Aqua 14.60 RH9990 - Let's help protect the environment. - 1

① Your device is designed to work for many years. But when you decide to replace it, don't forget to think about how you can help protect the environment by allowing it to be reused, recycled or recovered in some other way. Waste electrical and electronic equipment may contain harmful substances that can cause harm to the environment and human health.

This label indicates that this product must not be disposed of with household waste. Take it to a collection point, to the distributor when buying a new equivalent product, or an approved service center for processing. Before disposing of the device, remove the battery and dispose of it in accordance with local laws and local arrangements.

If you have any questions, please contact your product dealer who can tell you what to do.

PROBLEMS WITH YOUR APPLIANCE?

Depending on model:

PROBLEMS POSSIBLE CAUSES SOLUTIONS
The charger becomes hotThis is perfectly normal. The vacuum cleaner can remain permanently connected to the charger without any risk.
The charger is connected but your appliance is not chargingThe charger is not properly connected to the appliance or is faulty.Check that the charger is properly connected or contact an Approved Service Centre to change the charger.
Your appliance stops during operation and the charge light(s) flash(es) very quicklyYour appliance may be overheating.Stop the appliance and leave it to cool down for at least 1 hour.
The charge light flashes and the appliance stopsThe appliance has lost its charge.Recharge the vacuum cleaner.
The power-brush is not working properly or makes a noiseThe rotating brush or hose is obstructed.Stop the vacuum cleaner and clean them.
The brush is worn.Contact an Approved Service Centre to change the brush.
The belt is worn.Contact an Approved Service Centre to change the belt.
The power-brush stops during use of the vacuum cleanerThe heat safety device has come on.Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.
Your vacuum cleaner suction is not working properly or is making a whistling noiseThe tube or hose is partially blocked.Unblock them.
The dust collector is full. Empty it and clean it.
The dust collector is not properly fitted.Re-position it correctly.
The suction head is dirty. Remove the power-brush and clean it.
The motor protection filter is full. Clean it.
When the vacuum cleaner is charged, the charge light(s) flash(es) red or very quickly.The correct charger is not being used or the charger is faulty.Contact an Approved Service Centre to change the charger.
The red LED on the product flashes during useThe suction head brush is blocked.Stop vacuuming and check that there is nothing blocking the rotation of the brush.
The battery temperature is too high.Leave the product to rest for 30 minutes. If the problem persists, replace the battery.
The tube and/or suction head connectors are dirty or damaged.Clean the tube and suction head connectors with a cloth.
The suction motor is not working.Contact an Approved Service Centre to have your appliance repaired.

Please keep this user manual.

SICHERHEITSHINWEISE

BEZBEDNOSNA UPUTSTVA

Warning: [Use only with - designation - charger]

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ROWENTA

Model : XForce Flex Aqua 14.60 RH9990

Category : Vacuum Cleaner