TA 2629 - Toaster CLATRONIC - Free user manual and instructions

USER MANUAL TA 2629 CLATRONIC

General Safety Instructions

• Please read the operating instructions carefully before using the appliance.

• Please keep these instructions, the guarantee slip. The receipt and if possible the box with inner packaging in a safe place!

• This appliance is intended exclusively for private and not for commercial use.

• Always remove the plug from the socket when the appliance is not in use or when you are attaching accessories, cleaning it or in the event of a malfunction. Switch off the appliance. Do no pull the cable, pull the plug.

• Keep children away from the appliance to keep them safe from electric shocks. Make sure that the appliance is out of the reach of children. Ensure that the cable does not hang down.

• Check the cable and the appliance regularly for damage. Do not switch on the appliance if it is damaged.

• Do not repair the appliance yourself, but consult an authorised professional instead.

• Keep the appliance and the cable away from heat, direct sunlight, moisture, sharp edges and such like.

• Never leave the appliance unsupervised if it is use! Always switch off the appliance if you are not using it, even if only for a brief period.

• Only use original parts.

• Never use the appliance outside.

• Never submerge the appliance in water or any other liquid. Do not allow the appliance to come into contact with water or other liquids. Do not use the appliance with wet or moist hands.

• Remove the plug from the socket immediately if it is moist or wet. Do not touch the water!

• Only use the appliance for its intended purpose. *) Please observe the following “Special Safety Instructions…”. Special Safety Instructions for this Appliance

• Only use the appliance if supervised (very dry bread may catch fire if toasted).

• The metal parts heat up! Danger of burns!

• Do not insert any forks, knives or such like in the toasting slot.

Before Initial Use In order to remove the protective layer on the heating coil you should operate the machine approximately three times when it is empty. Please select the maximum level of browning. Any smoke or smells produced during this procedure are normal. Please ensure sufficient ventilation. Explanation of Symbols for the Function Keys This symbol is used to stop toasting This symbol stands for reheating This symbol stands for defrosting Operation

1. Only connect the appliance to a correctly installed safety plug

2. Turn the selector switch clockwise to set the toasting level from the lightest

stage 1 to the darkest stage 5. If in any doubt, start with the lower setting (the black mark on the selector switch shows you the setting).

3. Insert sliced bread into the toasting slot and push down the lever until it locks.

4. The appliance starts toasting. The appliance switches off immediately

once the set degree of toasting has been reached. The toast then pops up automatically.

5. The appliance has a heat-insulated "cool touch” casing. However, as metal

parts still heat up during operation, please allow cooling down before you put it away. If you wish to use the special functions, press the button you wish to select once you have pushed down the lever: REHEAT or DEFROST. The corresponding control lamp displays the function. Defrosting: To defrost and toast deep-frozen bread Reheating: To reheat toasted bread STOP: To stop toasting prematurely Integrated grill: To toast rolls 5....-05-TA2629_Korr. 04.07.2003 10:42 Uhr Seite 2526

• Before cleaning, remove the plug from the socket and allow the appliance to cool down.

• Use a moderately damp cloth to clean the outside of the appliance.

• Do not use any aggressive or scrubbing detergents.

• Grasp the crumb shaft by the loop and pull it out, remove the bread residue and push the shaft back in. This appliance conforms to the relevant CE guidelines and has been constructed on the basis of the latest technical safety regulations. Subject to technical changes! Guarantee We accept a guarantee period of 24 months for the appliance we have sold from the date of purchase (receipt). During this period we will repair any defects in the appliance without charge, provided that these defects are due to material or manufacturing faults. Subject to our own decision, we will repair or replace the appliance. Guarantee services neither extend the guarantee period nor do they mark the start of a new guarantee period! The receipt of purchase is the proof of guarantee. Free exchange or repair is not possible without this receipt. In the event of a guarantee claim, please return the complete appliance in the original packaging together the receipt to your dealer. Defects in accessories will not lead to a replacement of the entire appliance. Free replacement will be sent instead. Do not send back the appliance in these cases, but only reorder the defect accessory! Broken glass damage will always be subject to charges! Defects in wear parts (e.g. motor carbon, mixing hooks, driving belts, spare remote controls, spare toothbrushes, saw blades and such like) and cleaning, maintenance or the replacement of wear parts are not part of the guarantee services and are therefore subject to charge. The guarantee will be cancelled in the event of unauthorised tampering. After the Guarantee Repairs can be carried out by licensed dealers or the repair services after the end of the guarantee period, but are subject to charge. 5....-05-TA2629_Korr. 04.07.2003 10:42 Uhr Seite 2627