DH1017 - Projector OPTOMA - Free user manual and instructions

USER MANUAL DH1017 OPTOMA

Connector aux sources video

Image / Avance / Signal

AUTO

Options / Remote Settings

Fonction 1

Lamp is approaching the end of its useful life

SEND to emulate Remote

XX14010 7E30303134302031300D XX14011 7E30303134302031310D XX14012 7E30303134302031320D XX14013 7E30303134302031330D XX14014 7E30303134302031340D XX14015 7E30303134302031350D XX14016 7E30303134302031360D XX14017 7E30303134302031370D XX14018 7E30303134302031380D XX14019 7E30303134302031390D XX14020 7E30303134302032030D XX14021 7E3030313430203213D XX14028 7E303031343020328D D XX14047 7E30303134302034

Up
Left
Enter (for projection MENU)
Right
Down
Keystone +
Keystone -
Volume -
Volume +
Brightness
Menu
Zoom
Contrast
Source

SEND from projector automatically

232 ASCII Code HEX Code Function Projector Return Description

when Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Lock/Over Temperature/ Lamp Hours Running Out/Cover Open

INFOn n:0/1/2/3/4/6/7/8= Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out/Cover Open

READ from projector

232 ASCII Code HEX Code Function Projector Return Description
-XX121 1	7E 30 30 31 32 31 20 31 0D	Input Source Commands	OKn	n: 0/2/3/4/5/7/8/15 = None/VGA1/VGA2/Video/S-Video/HDMI1/HDMI2/DisplayPort
-XX122 1	7E 30 30 31 32 32 20 31 0D	Software Version	OKddd	dddd: FW version
-XX123 1	7E 30 30 31 32 33 20 31 0D	Display Mode	OKn	n: 0/1/2/3/4/5/6/7/8/
None/Presentation/Bright/Movie/sRGB/User/Blackboard/DICOM SIM./3D
-XX124 1	7E 30 30 31 32 34 20 31 0D	Power State	OKn	n: 0/1 = Off/On
-XX125 1	7E 30 30 31 32 35 20 31 0D	Brightness	OKn
-XX126 1	7E 30 30 31 32 36 20 31 0D	Contrast	OKn
-XX127 1	7E 30 30 31 32 37 20 31 0D	Format		OKn
				n: 0/1/2/3/4 =
				4:3'16:9/LBX/Native/AUTO
-XX128 1	7E 30 30 31 32 38 20 31 0D	Color Temperature	OKn	n: 3/0/1/2 = Warm/Standard/Cool/Cold
-XX129 1	7E 30 30 31 32 39 20 31 0D	Projection Mode	OKn	n: 0/1/2/3 = Front-Desktop/ Rear-Desktop/ Front-Ceiling/ Rear-Ceiling
-XX150 1	7E 30 30 31 35 30 20 31 0D	Information	OKabbbbcccdde	a: 0/1 = Off/On
				bbb: LampHour
				cc: source 00/02/03/04/05/07/08/15 =
None/VGA1/VGA2/Video/S-Video/HDMI1/HDMI2/DisplayPort				ddd: FW version
				e: Display mode 0/1/2/3/4/5/6/7/8/
None/Presentation/Bright/Movie/sRGB/User/Blackboard/DICOM SIM./3D
-XX151 1	7E 30 30 31 35 31 20 31 0D	Model name	OKn	n:1/2=X600/EH500
-XX108 1	7E 30 30 31 30 38 20 31 0D	Lamp Hours	OKbbb	bbb: LampHour
-XX108 2	7E 30 30 31 30 38 20 31 0D	Cumulative Lamp Hours	OKbbb:bbb: (5 digits) Total Lamp Hours—
-XX87 1	7E 30 30 38 37 20 31 0D	Network Status	Okn	n=0/1
Disconnected/Connected
-XX87 3	7E 30 30 38 37 20 33 0D	IP Address		Okaaa_bbb_ccc_ddd

Commandes Telnet

Command Description Remark (Parameter)
Device-UUID MA	C address (Hex value without' ':' separator)	12 digits
Device-SKClass	The Duet DeviceSdk class name VideoProjection
Device-Make Maker name MakerPXLW
Device-Model Model name Projector
Config-URL Device	ce's IP addressLAN IP address is shown up if LAN IP address is valid.Wireless LAN IP address is shown up if Wireless LAN IP address is valid.	http://xxx.xxx.xxx.xxx/index.html
Revision The revision must follow a major.minor.micro scheme. The revision is only increased if the command protocol is modified.	1.0.0

Command Description Remark (Parameter)
POWR Power control		0 = Standby
		1 = Power on
POWR? Inquiry about the power state		0 = Standby
		1 = Power on
		2 = Cooling down
		3 = Warming up
INPT INPT Input switching		11 = VGA1

Command Description Remark (Parameter)
INPT? Inquiry	about input switching	12 = VGA2
		13 = Component
		14 = BNC
		21 = VIDEO
		22 = S-VIDEO
		31 = HDMI 1
		32 = HDMI 2
AVMT Mute control		30 = Video and audio mute disable
AVMT? Inquiry	about the mute state	31 = Video and audio mute enable
ERST? Inquiry	about the error state	1st byte: Fan error, 0 or 2
		2nd byte: Lamp error, 0 to 2
		3rd byte: Temperature error, 0 or 2
		4th byte: Cover open error, 0 or 2
		5th byte: Filter error, 0 or 2
		6th byte: Other error, 0 or 2
		0 to 2 mean as follows: 0 = No error detected, 1 = Warning, 2 = Error
LAMP? Inquiry	about the lamp state	1st value (1 to 5 digits): Cumulative LAMP operating time (This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW.)
		2nd value: 0 = Lamp off, 1 = Lamp on
INST? Inquiry	about the available inputs	The following value is returned. "11 12 21 22 31 32"
NAME? Inquiry	about the projector name	The projector name set on the NETWORK menu or the ProjectorView Setup window is returned
INF1? Inquiry	about the manufacturer name	"Optoma" is returned.
INF2? Inquiry	about the model name	“EH7700” is returned.
INF0? Inquiry	about other information	No other information is available. No parameter is returned.
CLSS? Inquiry	about the class information	“1” is returned.

Trademarks

DLP is trademarks of Texas Instruments.
IBM is a trademark or registered trademark of International Business Machines Corporation.
Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries.
Microsoft, Windows, Windows Vista, Internet Explorer and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
AMX Device Discovery

The pro.jector is monitored and controlled by the control system of AMX.

Crestron RoomView ConnectedTM

The projector is monitored and controlled by the control system and software of Crestron Electronics, Inc.

PJLinkTM

PJLink trademark is a trademark applied for registration or is already registered in Japan, the United States of America and other countries and areas.

This projector supports standard protocol PJLinkTM for projector control and you can control and monitor projector's operations using the same application among projectors of different models and different manufacturers.

Annexes

Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders.
About Crestron RoomView ConnectedTM

Electronics, Inc. to facilitate configuration of the control system of Crestron and its target devices.

For details, see the website of Crestron Electronics, Inc.

URL http://www.crestron.com

URL http://www.crestron.com/getroomview/

2420 Meadowpine Blvd., Suite #105, Tel: [phone]

Mississauga, ON, L5N 6S2, Canada Fax: [phone]

www.optoma.ca Service : [e-mail]

Europe

42 Caxton Way, The Watford Business Park

Watford, Hertfordshire,

WD18 8QZ, UK Tél: [phone]

www.optoma.eu Fax: [phone]

Tél service: [phone] Service : [e-mail]

France

Bâtiment E Tél: [phone]

81-83 avenue Edouard Vaillant Fax: [phone]

92100 Boulogne Billancourt, France Service: [e-mail]

Espagne

C/ José Hierro,36 Of. 1C Tél: [phone]

28529 Rivas VaciaMadrid, Fax: [phone]

Espagne

Deutschland

Wiesenstrasse 21 W Tél: [phone]

D40549 Dusseldorf, Fax: [phone]

Allemagne

Service:[e-mail]

Scandinavie

Lerpeveien 25

Tel: [phone]

3040 Drammen

Fax: [phone]

Norway

Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan Kowloon, Hong Kong Tel: [phone] Fax: [phone] www.optoma.com.hk

Chine