X600 - Projector OPTOMA - Free user manual and instructions

USER MANUAL X600 OPTOMA

Commandes Telnet 78
Commandes AMX Device Discovery. 78

Connector aux sources video

Image / Avance / Signal

AUTO

Options / Remote Settings

Fonction 1

Lamp is approaching the end of its useful life

SEND to emulate Remote

\( \times {X1410} \)	7E 30 30 31 34 30 20 31 30 0D
\( \times {X14110} \)	7E 30 30 31 34 30 20 31 31 30 1D
\( \times {X14112} \)	7E 30 30 31 34 30 20 31 32 0D
\( \times {X14113} \)	7E 30 30 31 34 30 20 31 33 0D
\( \times {X14114} \)	7E 30 30 31 34 30 20 31 34 0D
\( \times {X14115} \)	7E 30 30 31 34 30 20 31 35 0D
\( \times {X14116} \)	7E 30 30 31 34 30 20 31 36 0D
\( \times {X14117} \)	7E 30 30 31 34 30 20 31 37 0D
\( \times {X14118} \)	7E 30 30 31 34 30 20 31 38 0D
\( \times {X14119} \)	7E 30 30 31 34 30 20 31 39 0D
\( \times {X14120} \)	7E 30 30 31 34 30 20 32 30 0D
\( \times {X14121} \)	7E 30 30 31 34 30 20 32 31 0D
\( \times {X14128} \)	7E 30 30 31 34 30 20 32 38 0D
\( \times {X14147} \)	7E 30 30 31 34 30 20 34 37 0D

Up

Left

Enter (for projection MENU)

Right

Down

Keystone +

Keystone -

Volume -

Volume +

Brightness

Menu

Zoom

Contrast

Source

SEND from projector automatically

232 ASCII Code	HEX Code	Function	Projectile Return	Description
when Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out/Cover Open
			INFOn	n: 0/1/2/3/4/6/7/8/ = Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out/Cover Open

READ from projector

232 ASCII Code	HEX Code	Function	Projectile Return	Description
~XX121 1	7E 30 30 31 32 31 20 31 0D	Input Source Commands	OKn	n: 0/2/3/4/5/7/8/15 = None/VGA1/ VGA2/Video/S-Video/HDMI1/HDMI2/DisplayPort
~XX122 1	7E 30 30 31 32 32 20 31 0D	Software Version	OKddddd	ddd: FW version
~XX123 1	7E 30 30 31 32 33 20 31 0D	Display Mode	OKn	n: 0/1/2/3/4/5/6/7/8/
None/Presentation/Bright/Movie/sRGB/User/Blackboard/DICOM SIM./3D
~XX124 1	7E 30 30 31 32 34 20 31 0D	Power State	OKn	n: 0/1 = Off/On
~XX125 1	7E 30 30 31 32 35 20 31 0D	Brightness	OKn
~XX126 1	7E 30 30 31 32 36 20 31 0D	Contrast	OKn
~XX127 1	7E 30 30 31 32 37 20 31 0D	Format		OKn
				n: 0/1/2/3/4 = 4:3/16:9/LBX/Native/AUTO
----XX128 1	7E 30 30 31 32 38 20 31 0D	Color Temperature	OKn	n: 3/0/1/2 = Warm/Standard/Cool/Cold
~XX129 1	7E 30 30 31 32 39 20 31 0D	Projection Mode	OKn	n: 0/1/2/3 = Front-Desktop/ Rear-Desktop/ Front-Ceiling/ Rear-Ceiling
~XX150 1	7E 30 30 31 35 30 20 31 0D	Information	OKabbbbcddde
				a: 0/1 = Off/Onbbb: LampHourcc: source 00/02/03/04/05/07/08/15 =
None/VGA1/VGA2/Video/S-Video/HDMI1/HDMI2/DisplayPort
				ddd: FW versione : Display mode 0/1/2/3/4/5/6/7/8/
None/Presentation/Bright/Movie/sRGB/User/Blackboard/DICOM SIM./3D
~XX151 1	7E 30 30 31 35 31 20 31 0D	Model name	OKn	n:1/2=X600/EH500
~XX108 1	7E 30 30 31 30 38 20 31 0D	Lamp Hours	OKbbb	bbb: LampHour
~XX108 2	7E 30 30 31 30 38 20 31 0D	Cumulative Lamp Hours	OKbbb	bbb: (5 digits) Total Lamp Hours——
~XX87 1	7E 30 30 38 37 20 31 0D	Network Status		Okn n=0/1
Disconnected/Connected
~XX87 3	7E 30 30 38 37 20 33 0D	IP Address		Okaaa_bbb_ccc_ddd

Commandes Telnet

Command	Description	Remark (Parameter)
Device-UUID	MAC address (Hex value without' ': separator)	12 digits
Device-SKClass	The Duet DeviceSdk class name	VideoProjector
Device-Make	Maker name	MakerPXLW
Device-Model	Model name	Projector
Config-URL	Device's IP addressLAN IP address is shown up if LAN IP address is valid.Wireless LAN IP address is shown up if Wireless LAN IP address is valid.	http://xxx.xxx.xxx.xxx/index.html
Revision	The revision must follow a major.minor.micro scheme. The revision is only increased if the command protocol is modified.	1.0.0

Command	Description	Remark (Parameter)
POWR	Power control	0 = Standby
		1 = Power on
POWR?	Inquiry about the power state	0 = Standby
		1 = Power on
		2 = Cooling down
		3 = Warming up
INPT	INPT Input switching	11 = VGA1

Command	Description	Remark (Parameter)
INPT?	Inquiry about input switching	12 = VGA2
		13 = Component
		14 = BNC
		21 = VIDEO
		22 = S-VIDEO
		31 = HDMI 1
		32 = HDMI 2
AVMT	Mute control	30 = Video and audio mute disable
AVMT?	Inquiry about the mute state	31 = Video and audio mute enable
ERST?	Inquiry about the error state	1st byte: Fan error, 0 or 2
		2nd byte: Lamp error, 0 to 2
		3rd byte: Temperature error, 0 or 2
		4th byte: Cover open error, 0 or 2
		5th byte: Filter error, 0 or 2
		6th byte: Other error, 0 or 2
		0 to 2 mean as follows: 0 = No error detected, 1 = Warning, 2 = Error
LAMP?	Inquiry about the lamp state	1st value (1 to 5 digits): Cumulative LAMP operating time (This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW.)
		2nd value: 0 = Lamp off, 1 = Lamp on
INST?	Inquiry about the available inputs	The following value is returned. "11 12 21 22 31 32"
NAME?	Inquiry about the projector name	The projector name set on the NETWORK menu or the ProjectionView Setup window is returned
INF1?	Inquiry about the manufacturer name	"Optoma" is returned.
INF2?	Inquiry about the model name	“EH7700” is returned.
INF0?	Inquiry about other information	No other information is available. No parameter is returned.
CLSS?	Inquiry about the class information	“1” is returned.

Trademarks

DLP is trademarks of Texas Instruments.

IBM is a trademark or registered trademark of International Business Machines Corporation.
Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries.
Microsoft, Windows, Windows Vista, Internet Explorer and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
AMX Device Discovery

The projector is monitored and controlled by the control system of AMX.

Crestron RoomView ConnectedTM

The projector is monitored and controlled by the control system and software of Crestron Electronics, Inc.

PJLinkTM

PJLink trademark is a trademark applied for registration or is already registered in Japan, the United States of America and other countries and areas.

This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector's operations using the same application among projectors of different models and different manufacturers.

Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders.
About Crestron RoomView ConnectedTM

Electronics, Inc. to facilitate configuration of the control system of Crestron and its target devices.

For details, see the website of Crestron Electronics, Inc.

URL http://www.crestron.com

URL http://www.crestron.com/getroomview/

2420 Meadowpine Blvd., Suite #105, Tél: [phone]

Mississauga, ON, L5N 6S2, Canada Fax: [phone]

www.optoma.ca Service:[e-mail]

Europe

42 Caxton Way, The Watford Business Park

Watford, Hertfordshire,

WD18 8QZ, UK Tel: [phone]

www.optoma.eu Fax: [phone]

Tél service: [phone] Service: [e-mail]

France

Bâtiment E Tél: [phone]

81-83 avenue Edouard Vaillant Fax: [phone]

92100 Boulogne Billancourt, France Service: [e-mail]

Espagne

C/ José Hierro,36 Of. 1C Tel: [phone]

28529 Rivas VaciaMadrid, Fax: [phone]

Espagne

Deutschland

Wiesenstrasse 21 W Tél: [phone]

D40549 Dusseldorf, Fax: [phone]

Allemagne Service:[e-mail]

Scandinavie

Norway Service:[e-mail]

PO.BOX 9515

3038 Drammen

Norway

Amérique latine

3178 Laurelview Ct.

Tél: [phone]

Fremont, CA 94538, USA

Fax:[phone]

www.optoma.com.br

www.optoma.com.mx

Taiwan

Unit A, 27/F Dragon Centre, 79 Wing Hong Street,

Cheung Sha Wan Kowloon, Hong Kong

Tél: [phone]

Fax: [phone]

www.optoma.com.hk

Chine

上海市长宁区凯旋路1205号5楼

电话：[phone]

邮编：200052

传真：[phone]

www.optoma.com.cn

Japon

東京都足立区絵瀬3-25-18

☆ト一：0120-46-5040

株式会社才一工又工么

E-Mail: [e-mail]

http://www.os-worldwide.com/

Corée

WOOMI TECH.CO.,LTD.

4F, Minu Bldg.33-14, Kangnam-Ku,

Tél: +82+2+34430004

seoul,135-815,KOREA

Fax:+82+2+34430005