CLR245 - Radio ROADSTAR - Free user manual and instructions

USER MANUAL CLR245 ROADSTAR

Roadstar® AUDIO VIDEO AM/FM Radio Alarm Clock CLR-245 Instruction manual Bedienungsanleitung Manuel d'instructions Manuale d'istruzioni Manual de instrucciones Manual de instruções Roadstar is a registered Trademark of Roadstar S.A. - Switzerland. All rights reserved

CLR-245

Instruction manual

Bedienungsanleitung

- Your new manufacture and assembly under the ROADSTAR quality control. Thank you for purchasing our product by your music enjoyment. Before operating the unit, please read this instruction manually carefully. Keep itself ready for further future references.

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of "dangerous voltage" inside the unit.

To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside the unit. Refer all servicing to qualified personnel.

This unit operates on 230V \~ 50Hz. If the unit is not used for a long period of time, remove the plug from the AC mains.

This unit must not be exposed to moisture or rain.

The power switch in this unit is mounted on the secondary circuit and does not disconnect the whole unit from the mains in OFF position.

Ensure all connections are properly made before operating the unit.

This unit should be positioned so that it is properly ventilated. Avoid placing it, for example, close to curtains, on the carpet or in a built-in installation such as a bookcase.

Do not expose this unit to direct sunlight or heat radiating sources.

Make sure the battery is inserted according to the proper polarity.

If the unit is not used for a long period of time (more than 1 month), remove the battery from the compartment to avoid possible leaking.

2

CLR-245

DIGITALALARM CLOCK RADIO

TABLE OF CONTENTS

• LOCATION OF CONTROLS
• POWER SUPPLY
- AC POWER
- SPECIFICATIONS

LOCATION OFCONTROLS

1. AUTO/OFF/ON Switch
2. SLEEP SET Button
3. AUTO Indicator
4. DIAL Pointer
5. CLOCK LED Display (24 hours mode)
6. AC Cord
7. SNOOZE/SLEEP OFF Button
8. ALARM SET Button
9. HOUR SET Button
10. TUNING Control
11. BAND Selector
12. VOLUME Control/Buzzer
13. MINUTE SET Button
14. TIME SET BUTTON
15. FM ANTENNA WIRE
16. BATTERY BACK-UP
17. ALARM OFF Button

English En

POWERSUPPLY

This unit operates from a main supply of 230V \~ 50Hz. Connect the AC power cord to the AC household main outlet. Ensure that the voltage is as indicated on the rating plate on the rear of the unit.

Battery Back-up Power Failure Protection

This radio has a battery back up circuit that will keep the correct time and alarm settings in the event of a temporary power interruption. Install a 9-volt battery (type 6F 22/006P), not included, into the battery compartment located on the bottom of the unit.

Note: We recommend an alkaline battery for longer usable life. Change the battery every 9 to 12 months for best result and avoid possible battery leakage.

If power is temporarily interrupted the display will OFF and the radio will not play. However, the battery back-up circuit will continue to maintain the clock and alarm settings. When power is restored the clock will display the correct time and alarm settings, and no adjustment is necessary.

Note: If power is interrupted and there is no battery in the compartment or the battery is exhausted. The time and alarm settings will be lost. When power is restored the clock will begin to flash indicating that the time and alarm settings must be corrected.

4

SETTINGTHECORRECTTIME

1. Set the FUNCTION Selector (1) to the OFF position.
2. Press and keep pressed the TIME SET Button (14), then press the HOUR button (9) to advance hour, press MINUTE button (13) until the correct time is displayed.

SETTINGTHE WAKEUPTIME

1. Set the FUNCTION Selector (1) to the OFF position.
2. Set the alarm time by following this procedure:
3. Press and hold the ALARM SET Button (8).
4. Press the HOUR Button (9) to advance hour, press MINUTE button (13) until the desired alarm time is displayed.
5. Release the ALARM SET Button (8)
6. To check the correct alarm time is set, press the ALARM SET Button (8).

WAKETOBUZZERALARM

1. Set the alarm time as shown above.
2. Set the Function Selector (1) to the AUTO position.
   “●” will appear on the left lower side of the display.
3. Turn the VOLUME Control (12) down (to OFF) until you hear a click.
4. To switch off the alarm either press the ALARM SET (8) or ALARM OFF Buttons (17), or set the FUNCTION Selector (1) to the OFF position.

English En

WAKETOTHERADIO

1. Set the alarm time as shown above.
2. Set the FUNCTION Selector (1) to the ON position.
3. Set the Band Selector (11) to the desired radio band, and follow the procedure in LISTENING TO THE RADIO to tune the radio to a station.
4. Set the VOLUME Control (12) to a level you feel will wake you.
5. Sel the FUNCTION Selector (1) to the AUTO position. "●" will
   appear on the left lower side of the display
6. To switch off the alarm either press the ALARM SET (8) or ALARM OFF Buttons (17), or set the FUNCTION Selector (1) to the OFF position.

LISTENINGTOTHERADIO

1. Set the FUNCTION Selector (1) to the ON position.
2. Set the BAND Selector (11) to the desired band (FM or MW).
3. Tum the TUNING Knob (10) until the desired station is heard.
4. Adjust the VOLUME Control (12) to a comfortable listening level.
5. To turn off the radio, set the Function Selector (1) to the OFF position.
   Note: For FM reception there is a built-in FM antenna wire at the rear of the unit. Move the wire around to obtain the best reception. The AM band uses a built in directional aerial. You may have to rotate the clock radio for the best reception.

6

SNOOZEFUNCTION

When the alarm sounds, pressing the SNOOZE Button (7) will temporary stop about 9 minutes then the alarm sounds again.

SLEEPFUNCTION

1. This function enables you to go to sleep listening to the Radio.
2. Set the FUNCTION Selector (1) to OFF or AUTO.
3. Press the SLEEP Button (2). The clock display will show 59 minutes. The Radio turns on and will turn off automatically after 59 minutes.
4. To select a shorter time press the MINUTE Button (13) while holding the SLEEP Button (2) until the desired sleep time is displayed.
5. To turn off the Radio at any time during the Sleep period, press the SNOOZE/SLEEP OFF Button (7).

CAREANDMAINTENANCE

To prevent fire or shock hazard, do not allow this clock radio to be exposed to rain or moisture. This clock radio should not be exposed to direct sunlight, very high or low temperature, moisture, vibration, or placed in a dusty environment. Do not use abrasives, benzine, thinners, or other solvents to clean the surfaces of the clock radio. To clean it, wipe with a mild non-abrasive

Color palette bar with grayscale gradient and a crosshair symbol (no text or symbols)

English En

ish

detergent solution on a clean soft cloth.

Never attempt to insert wires, pins, or other objects into the ventilation holes or openings on the clock radio.

Note: When setting the Clock or Alarm times remember that this clock radio has a 24 Hour clock mode.

ACPOWER

For your own safety read following instructions carefully before attempting to connect this clock radio to the mains.

This unit is designed to operate on a 230V\~50Hz supply only.

Connecting it to other power sources may damage it. Ensure that supply corresponds to the information on the rating label on the bottom of the unit.

SPECIFICATIONS

FM Band: 88 to 108 MHz

AM Band: 540 to 1600 kHz

Power Supply: 230VAC, 50 Hz

Back-up Battery : 9V DC 006P (not included)

8

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Deutsch De

SICHERHEITSHINWEISE