MT1592B - Graphic tablet XP-Pen - Free user manual and instructions

USER MANUAL MT1592B XP-Pen

© serviceaxp-pen.com @ wwwxp-pen.com

Deco Pro Series Drawing Tablet (Gen 2)

b. Flashing quickly: Waiting for Bluetooth pairing (Long press the Power Key for 6 seconds)

b. Always On: Charging

c: Off: Fully charged

The purple status indicates that the red and blue indicators are bath On simultaneously

a. Off: The stylus is beyond the active area

b. Always On: The stylus is in contact with the active area

All descriptions and pictures shown are fer reference en end may fer from the actual products Due to different procuet speciications, the wireless shout remote may not be included! Please refer 10 the

Due to different procuet speciications, the Bluetooth receiver may not be included. Please refer a the actuol

a. Flashing slowiy: No Bluetooth connected

b. Flashing quickly: Waiting for Bluetooth pairing

c: Always on: Successtully paired (Always on for 30 seconds and then off)

a. Flashing: Low battery (20%)

b. Always on: Charging

c: Off: Fully charged

The purple status indicates that the red and blue indicators are both On simultaneousy

5. Shortcut Key Group

The Wireless Shorteut Remote can be customized in four modes, with each mode customizing 10 keys. You can disable them if you don't need them.

One mode is enabled by default, and K1 is the toggle key. Click to switch between different key groups.

Wired Connection Drawing Tablet

Please connect the USB-C to USB-C cable or the USB-C to USB-A cable to the USB port on the computer and the USB-C port on the tablet side respectively.

Wireless Shortcut Remote

Please connect the USB-C to USB-C cable or the USB-C to USB-A cable to the USB port on the computer and the USB-C port on the wireless shorteut remote respectively.

PAGES Dream : Brave - True

Connect to Android Phone or Tablet

1. Please connect the USB-C to USB-C cable to the Android device and the drawing tablet respectively.

2. Please place the XPPen drawing tablet and the Android device upright, and open an Android App with support for pressure sensing

3. Please disenable the auto-rotate function in the Android device, and keep the screen in portrait mode:

‘ Gurent, the drawing tablet can only be used normally when the Android device is in portrait mode. wil not be used nommall when in landscape mode.

Wireless connection À. Direct Bluetooth Connection

1. Press and hold the power switch for 3 seconds to tum on the drawing tablet, and the indicator light 1 flashes in blue: then long press the power switch for 6 seconds to enter the waiting state for pairing, and the indicator light 1 flashes in blue quicky.

2. Tum on the Bluetooth on the computer, add Bluetooth device, search for the device name "Deco Pro XX”, and click to complete the Bluetooth pairing, with the blue indicator light 1 always on.

3. Press and hold the power switch for 3 seconds to shut down.

1. Slide the power switch and the blue indicator light flashes slowy. Then long press

the KI shorteut key for 3 seconds to enter Bluetooth paiing and the blue indicator

light flashes quick. 1. Toggle the Bluetooth switch button to button 1, long press the power button for 6 seconds, and the drawing tablet is paired with device 1

The drawing tablet supports connection ta two Bluetooth devices

2. Tum on the Bluetooth on the computer, add Bluetooth device, search for device name “Shorteut Remote” and complete Bluetooth pairing by clicking the device name “Shorteut Remote”, with the blue indicator always on. The indicator will be off after 30 seconds, 3. Toggle the Bluetooth switch button to switch the Bluetooth connection between the two devices.

2. Toggle the Bluetooth switch button to button 2, press and hold the power key for 6 seconds, and the drawing tablet is paired with device 2

3. Slide the power switch again to turn off.

Le Ci button2 1 CD 2 B. Bluetooth Receiver Connection Only Wireless Shorteut Remote V. Support System Plug the Bluetooth receiver into the computer and slide the power switch, with the Drawing Tablet indicator light always on in blue. The blue indicator will be off after 30 seconds. Wired Connection: —— ———) Windows 7 (or later), macOS X 10.10 (or later), Android 10.0 (or later),

Chrome OS 88 (or later}, Harmony OS, Linux.

Bluetooth Connection: Windows 10 (or later), macOS X 10.10 (or later].

Wireless Shortcut Remote

Wired or Dongle Connection Windows 7 (or later), macOS X 10.10 (or later), Linux.

Bluetooth Connection: Windows 10 (or later), macOS X 10.10 (or later].

VI. Download and Install the Driver 1. Make sure your equipment is connected correctly to the computer.

2. Visit the XPPen website [www.xp-pen.com}, click on the Support section and then Download. Choose a product model and download the latest driver according to your computer system.

3. Follow the prompts to finish the driver installation. Notes: 1. Before installation, please close all anti-virus software and graphics software.

2. fthe computer has already installed the divers of other brandk, please uninstall them first.

3. Please restart your computer after the installation is complete.

4. Forthe best performance of your device, it is recommended that you use the latest version of the driver.

If you need any further assistance, please contact us at:

© senviceaxp-pen.com © wwwxp-pen.com

LE ——+ (asset) J (Mtessussenenes| oops)

3. EMER, APS MINE MINE.

3 AVAR-LÉTÉ, IVTUÆREMU THE,

AH SION SUR] BE 4H A moe #8

© seniceaxp-pencom © wwwxp-pen.com

ae Li Ja ca y chibuo) nets QI Las ai Ve

© seniceaxp-pencom © wwwxp-pen.com

PAGESS Declaration of Conformity

Hereby,[Hanvon Ugee Technology Co..Ltd.] declares that the radio equipment type [MT1592B] is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: www.ugee.com/

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help

REF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions:

(1) this device may not cause interference ;

(2) this device must accept any interference, including interference that may cause undesired operation ofthe device.

Le pr 6 sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autoris € e aux deux conditions suivantes :

MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.

Toute modification non approuv é explicitement par le fournisseur de licence de 1’ appareil peut entraîer l”_ annulation du droit del” utilisateur à utiliser” appareil.

Operation Frequency: 2402-2480MHz Max power: 3.3dbm

Operating temperature: 0-45 C Manufacturer: Hanvon Ugee Technology Co..Ltd.

Address: 2/F, West of3/F, 4/F, No.4 Building, Fulongte Industrial Park, Huaxing Road, Langkou Community, Dalang Street, Longhua District, Shenzhen, Guangdong China