STEAMJET HANDY SSH1300 - Portable steam cleaner HOOVER - Free user manual and instructions

Product Type	Portable Steam Cleaner
Brand	HOOVER
Model	STEAMJET HANDY SSH1300
Power Supply	220-240 V ~ 50/60 Hz
Recommended Fuse	13 A (United Kingdom)
Water Tank Capacity	Approximately 350 ml
Heating Time	A few minutes (green light)
Included Accessories	Hose, 3 extension tubes, mop head, cloth (x1), fabric support, window squeegee, flat nozzle, large round brush, angular nozzle, small round brush, conical tip, concentration nozzle, funnel, measuring cup
Main Functions	Steam cleaning of hard floors, refreshing carpets and rugs, degreasing (kitchen, shower), window cleaning, sofas, hard-to-reach areas
Safety	Safety lock on the trigger, child lock, recommended to stop before maintenance, unplug before filling
Maintenance	Empty the tank after use, wash cloths at max 30°C without bleach or softener, descale if hard water
Repairability	Repairs exclusively by an authorized HOOVER repairer
Warranty	Defined by local representative, present purchase invoice
Standards	Complies with European directives 2006/95/EC, 2004/108/EC, 2011/65/EC
Weight (estimated)	Approximately 3.5 kg

Frequently Asked Questions - STEAMJET HANDY SSH1300 HOOVER

How to fill the water tank?

Unplug the appliance, press the steam trigger to release pressure, then remove the lid by turning it counterclockwise. Use the funnel to pour tap water up to the max level. Screw the lid back on.

Why is my cleaner not producing steam?

Check that the appliance is plugged in and turned on (red light). The green light should be on to indicate that the water is hot. Make sure the tank has enough water and the safety lock on the handle is unlocked.

How to use the accessories?

First attach the conical tip to the handle or tube, then snap on the desired accessory (brush, squeegee, etc.) by aligning the arrows and turning clockwise. You can now press the trigger to release steam.

Can I use detergents in the tank?

No, use only water. Adding detergents or chemical liquids may damage the appliance and void the warranty.

How to clean the cloths?

Remove the cloths from the mop head or squeegee. Wash them by hand or in the machine at a maximum of 30°C with a mild detergent. Do not use bleach or fabric softener.

What to do if the cloth does not pick up dirt well?

The cloth may be too dirty. Wash it as directed. If the problem persists, replace it with a new one.

The appliance heats slowly, what to do?

If you live in a hard water area, the tank may be scaled. Descale the appliance with a suitable descaling agent for steam cleaners, following the manufacturer's instructions.

How to store the appliance after use?

Turn off and unplug the appliance. Press the trigger to release residual steam. Let it cool completely, empty the tank, and coil the cord. Store it in a dry place.

Can I use the cleaner on carpets?

Yes, you can refresh carpets and rugs using the special cloth. Pass steam slowly without saturating the fabric.

What to do in case of malfunction?

First consult the troubleshooting section of the manual. If the problem persists, contact an authorized HOOVER after-sales service. Do not attempt to repair yourself.

USER MANUAL STEAMJET HANDY SSH1300 HOOVER

This cleaner should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance. Use only attachments recommended or supplied by HOOVER.

When using cleaning tools, always steady the product with your other hand. This will ensure the product does not fall while in use.

WARNING: Danger of scalding. This product is very hot when used. Avoid any contact with steam.

WARNING: Electricity can be extremely dangerous. This appliance must be earthed. This plug is fitted with a 13 AMP FUSE (UK ONLY).

IMPORTANT: The wires in the mains power cord are coloured in accordance with the following code: Blue - Neutral, Brown - Live.

AFTER USE: Switch the cleaner off and remove the plug from the electricity supply. Always switch off and remove the plug before cleaning the appliance or attempting any maintenance task.

SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance, we recommend that any servicing or repairs are only carried out by an authorised HOOVER service engineer.

IT IS IMPORTANT THAT YOU DO NOT:

• Leave the cleaner unattended while switched on.
• Unplug by pulling on the cord.
• Handle the plug or product with wet hands.
• Use detergents or liquids other than water inside the product.
• Direct steam towards equipment containing electrical components, such as the interior of ovens.
• Do not put the cleaner in water or other liquids.
• Do not position the cleaner above you when cleaning the stairs. Do not use your cleaner out of doors.
• Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as

this may cause risk of fire / explosion.

• Do not stand on or wrap the power cord around arms or legs when using the cleaner.
• Do not use the appliance to clean or direct steam towards people, animals or plants.
• Do not continue to use your cleaner if it appears to be faulty. If the power cord is damaged stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised HOOVER service engineer must replace the power cord.

GETTING TO KNOW YOUR CLEANER

A. On Indicator Light (Metallic Red) B. Steam Ready Indicator Light (Green) C. On/Off Button D. Water Tank Lid E. Carry Handle F. Cleaner Main Body G. Connector Cover H. Crest I. Extension Tubes (3 pcs) J. Floor Head K. Floor Head Cloth (x1) L. Floor Head Connector M. Cloth Mounting (X1) N. Window Squeegee / Upholstery Tool O1. Large Round Brush O2. Angled Nozzle O3. Small Round Brush P. Conic Tool Q. Concentration Nozzle R1. Funnel R2. Measuring Jug S. Steam Handle T. Hose U. Steam Trigger V. Safety Latch W. Extension tube release latch

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

1. Attach the hose to the main body of the cleaner. [2]
2. Attach the extension tube to the hose handle. Connect the other extension tubes together. [3]
3. Attach the floor head connector to the floor head. Rotate the connector in place. [4]
4. Attach the extension tubes to the connector until it clicks in place. [5]
5. Ensure the handle safety latch is locked. [6]

NOTE: To remove the extension tube from the handle or the floor head from the tubes, press the release latch and pull apart.

USING YOUR CLEANER

1. Remove the clean water lid by pushing down and turning anti-clockwise. [7]
2. Fill the measuring jug no more than the Max fill line.
3. Insert the funnel into the water tank and fill the unit with water. [8]
4. Replace the lid by pushing down and turning clockwise.
5. Ensure the handle safety latch is locked. [6]

IMPORTANT: Always unplug the cleaner and press the steam release trigger to release any remaining steam pressure before adding water.

Steam cleaning hard floors

1. Ensure the floor head is connected to the extension tube.
2. Plug the steam cleaner into the main power and switch on. The red ON light will illuminate. [9]
3. After a few minutes the green Steam Ready light will illuminate indicating the cleaner is ready for use.
4. Release the steam handle safety latch. [10]
5. To produce steam press the Steam Trigger Button. [11]
6. Move the cleaner slowly backwards and forwards, paying particular attention to high traffic areas.

Refreshing carpets

IMPORTANT: Always unplug the cleaner and press the steam release trigger to release any remaining steam pressure before adding water or changing a textile pad or accessory tool.

1. Place the floor head onto the floor cloth. [12]
2. Lift the levers on either side of the floor head to secure each end of the floor cloth in place. [13]
3. Repeat steps 2-6 as detailed above.

ACCESSORIES

1. Ensure the handle safety latch is locked. [6]
2. To attach the concentration nozzle, push it onto the handle/extension tube until it clicks in place. [14]
3. Push the desired small tool onto the conic tool and concentration tool, aligning the arrows. [15]
4. Twist clockwise to secure in place. [15]
5. Plug the steam cleaner into the main power and switch on. The red ON light will illuminate. [9]
6. After a few seconds, the green Steam Ready light will illuminate, indicating the cleaner is ready for use.
7. Release the steam handle safety latch. [10]
8. To produce steam, press the Steam Trigger Button. [11]

NOTE: The conic tool must be attached before fitting any other small tools.

Conic tool: Use on heavily soiled areas such as showers, kitchens. [16] Window squeegee: Use on windows and mirrors for a smear-free clean. [17] Upholstery tool: Use the upholstery cloth over the window tool for use on sofas and chair fabrics. [18]

Large round brush: Use on stubborn grease and grime. [19]

Small round brush: For oven grills and racks. [20]

Angled nozzle: For hard-to-reach areas such as taps etc. [21]

IMPORTANT: Always unplug the cleaner when adding water, changing a textile pad or accessory tool.

CLEANER MAINTENANCE

IMPORTANT: ALWAYS ENSURE THE CLEANER HAS FULLY COOLED DOWN BEFORE PERFORMING ANY MAINTENANCE TASKS.

Empty the water tank

1. Unplug the cleaner from the main power and ensure the unit has cooled.
2. Hold the steam trigger down to release any remaining steam pressure. [11]
3. Put the steam handle safety latch on. [6]
4. Remove the clean water lid by pushing down and turning anti-clockwise. [7]
5. Lift the cleaner and empty any remaining water. [22]

Removing and cleaning the textile pad

1. Unplug the cleaner from the main power and ensure the unit has cooled.
2. Remove the cleaning cloths from floor head or window tool.
3. Wash the cleaning cloths by hand or machine with a mild detergent at max temperature 30°C.

IMPORTANT: Do not use bleach or fabric softener when washing the textile pad.

TROUBLESHOOTING

Should you have a problem with the product, complete this simple user checklist before calling your local HOOVER service.

The steam cleaner will not switch on.

• Check the unit is plugged in.
• Check the power cord.

The product is not producing steam.

• Check the unit is switched on. There may be no water in the water tank.
• The safety latch may be locked. If so unlock the safety latch.
• The water is not at the correct temperature. The green light will illuminate when ready.

The cleaner is taking a long time to heat up. - If you live in a hard water area the water tank may have become blocked. The unit will have to be descaled. The cleaning cloth won't pick up dirt. - The cleaning pad may already be saturated with dirt and needs to be washed. Refer to the Maintenance section.

IMPORTANT INFORMATION

Hoover Service

Should you require service at any time, please contact your local Hoover Service office.

Quality

Hoover's factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001

The Environment:

This appliance is marked according to the European Directive 2011/65/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment. Disposal must be carried out in accordance with the local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

This product complies with the European Directives 2006/95/EC, 2004/108/EC and 2011/65/EC.

HOOVER Limited Pentrebach, Merthyr Tydfil, Mid Glamorgan CF48 4TU

Your Guarantee

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY REMINDERS

SAFETY FOR CHILDREN, ELDERLY AND VULNERABLE PEOPLE

WHEN YOU START CLEANING

Instructions for use

Use the appliance for cleaning floors away from the main body to clean the floor and the upholstery. [18]

Use on hard floors, carpets, rugs, and upholstery. [19]

Small round brush

For small surfaces and crevices. [20]

Twiwdecakpovuo

IMPORTANT: DO NOT FORGET TO TURN OFF THE APPLIANCE AND REMOVE THE PLUG FROM THE ELECTRICAL OUTLET BEFORE CLEANING OR TECHNICAL MAINTENANCE!

SAFETY OF CHILDREN AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES: Children older than eight years, as well as persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, may use the appliance under supervision or after having been instructed in a safe way and understanding the risks involved. The appliance must not be used as a toy. Children must not be allowed to clean or maintain the appliance without supervision.

HOOVER SERVICE: To guarantee the safe and reliable operation of this appliance, we recommend that you contact authorized Hoover service engineers for technical maintenance and repairs.

IMPORTANT: DO NOT DO THE FOLLOWING:

Leave the vacuum cleaner unattended while it is switched on - turn it off and unplug it. - Do not hold the appliance with wet hands. - Do not use cleaning agents or liquids other than water inside the appliance.

• Direct the air flow at the appliance containing electrical components, such as the interior of the appliance. - Do not immerse the vacuum cleaner in water or other liquids. - When cleaning stairs, place the vacuum cleaner below you. - Do not use the vacuum cleaner outdoors.
• Do not spray or collect flammable liquids, wet liquids, aerosols or their vapors, as this may cause fire or explosion. While the vacuum cleaner is in operation, do not stand on the power cord or place it on your hands or feet.
• Do not use the appliance for cleaning or direct the air flow at people, animals or plants.
• If signs of malfunction appear, immediately turn off the vacuum cleaner. If the power cord is damaged, immediately unplug the vacuum cleaner. To avoid safety hazards, the power cord must be replaced by an authorized Hoover service engineer.

GET TO KNOW YOUR VACUUM CLEANER

A. "ON" indicator (red) B. "Dust full" indicator (green) C. "Mains" button D. Water reservoir lid E. Carrying handle F. Vacuum cleaner body G. Connector cover H. Comb I. Extension tubes (3 pcs.) J. Floor nozzle K. Crevice nozzle (x1) L. Crevice nozzle connector M. Crevice nozzle clip (x1) N. Window scraper / upholstery nozzle O1. Large round brush O2. Angle nozzle O3. Small round brush P. Conical nozzle Q. Flat nozzle R1. Socket R2. Measuring cup S. Handle for carrying T. (unclear) U. Starter switch V. Safety catch W. Release catch for extension tubes

ASSEMBLING THE VACUUM CLEANER

Remove the components of the vacuum cleaner from the packaging.

1. Attach the hose to the main body of the vacuum cleaner. [2]
2. Attach the extension tube to the handle. Connect the remaining tubes. [3]
3. Attach the floor nozzle connector to the nozzle. Turn the connector into place. [4]
4. Attach the additional tubes to the connector until they click into place. [5]
5. Make sure the safety catch on the handle has engaged. [6]

NOTE: To remove an additional tube from the handle or nozzle, press the release catch and pull it to the side.

OPERATING THE VACUUM CLEANER

BEFORE YOU START CLEANING

1. Remove the lid from the clean water reservoir by pressing on it and turning it counterclockwise. [7]
2. Fill the measuring cup with no more than the maximum mark.
3. Insert the hose into the water reservoir and fill the device. [8]
4. Install the lid in place by pressing on it and turning it clockwise.
5. Make sure the handle safety latch has engaged. [6]

The small round nozzle is for the handle and attachments. [20]

The angled nozzle is for hard-to-reach areas, such as water taps, etc. [21]

WARNING! Before filling with water or changing the cloth or nozzle, always unplug the device from the outlet.

VACUUM CLEANER MAINTENANCE

WARNING! BEFORE PERFORMING TECHNICAL MAINTENANCE ON THE VACUUM CLEANER, MAKE SURE IT HAS COMPLETELY COOLED DOWN.

Empty the water reservoir

1. Unplug the vacuum cleaner and make sure the unit has cooled down.
2. Engage the handle safety latch for the handle. [6]
3. Remove the lid from the reservoir to empty the water, by pressing on it and turning it counterclockwise. [7]
4. Lift the vacuum cleaner to drain the remaining water. [22]

Remove and clean the textile cloth.

The device does not heat up.

• Make sure the device is turned on. Possibly there is no water in the reservoir. Possibly the safety latch is engaged. If so, disconnect the safety latch.
• Incorrect water temperature. In case of readiness, the green indicator lights up.

The device is heating up for a long time.

• If the water in your region is hard, the water reservoir may become clogged with scale. It is necessary to remove the scale from the reservoir.

The iron does not collect dirt. The cleaning pad may already be saturated with dirt and may need to be

It is necessary to rinse. Refer to the "Technical Maintenance" section.

IMPORTANT INFORMATION

Hoover company service maintenance