BEGLEC DSP-6 - Digital lighting control system

DSP-6 - Digital lighting control system BEGLEC - Free user manual and instructions

Find the device manual for free DSP-6 BEGLEC in PDF.

English EN Download 💬 AI Question 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product type Digital lighting control system (Dimmer + Switch pack)
Brand BEGLEC
Model DSP-6
Number of channels 6 channels
Maximum load per channel 10 A (with 10 A automatic circuit breakers)
Control inputs DMX-512 (XLR 3-pin) and analog 0/10 V (DIN 8-pin connector)
Outputs 6 outputs, 2 wires per channel (L and N)
Functions Switch/Dimmer per channel or block, linear/square curves, preheat (0-50%), phase correction, individual or block DMX addressing, power failure memory
Behavior in absence of DMX signal Hold, Analog (0/10 V), or automatic playback of 12 internal programs
Power supply Single-phase 230 V~ 50/60 Hz or three-phase 230 V~ 50/60 Hz (L1, L2, L3, N + ground)
Display LCD screen with output status for each channel and level bars
LED indicators DMX (flashing when signal detected) and channel output status
Circuit breakers 6 automatic circuit breakers (10 A) protecting each channel
Construction Modular, easy maintenance
Dimensions (W x H x D) 483 × 88 × 420 mm
Weight 9 kg
Max. ambient operating temperature 45 °C
Maintenance and cleaning Soft, slightly damp cloth; do not use volatile products
Safety Do not open (risk of electric shock), mandatory grounding, use certified cables, disconnect before maintenance
Spare parts and repairability Main fuse replaceable by a qualified technician (same type and specifications); entrust maintenance to a professional

Frequently Asked Questions - DSP-6 BEGLEC

What types of control inputs does the DSP-6 accept?
The DSP-6 accepts DMX-512 signals (via XLR 3-pin connectors) and analog 0/10V signals (via DIN 8-pin connector). DMX signals take priority over analog inputs.
How to configure behavior in case of DMX signal loss?
Use the Dmx fail menu to choose between Hold (maintain last scene), Analog (switch to analog 0/10V input), or an automatic program (Prog 01 to 12) with speed adjustment.
Can I set the DMX address of each channel individually?
Yes, via the Dmx addr menu in Single mode. You can assign a different DMX address to each channel (soft patch), or set a starting address for all channels in Block mode.
How to set lamp preheat?
Access the Preheat menu. You can set a preheat level from 0 to 50% for all channels (All mode) or individually for each channel (Single mode).
What dimming curves are available?
The DSP-6 offers 3 curves: linear, square, and a third unspecified one. You can assign them to all channels (All mode) or individually (Single mode) via the Curve menu.
What to do if the LCD screen shows nothing?
First check the power supply and circuit breakers. If the device is powered on and the screen remains off, consult a qualified technician. Do not open the device yourself.
How to connect the DSP-6 in three-phase?
Connect phases L1, L2, L3 to the corresponding terminals, neutral (N) to the N terminal, and ground (E). Loads are connected to the outputs of each channel (L and N). Ensure the installation is carried out by a qualified electrician.
Can the fuse be replaced by oneself?
Yes, but only with a fuse of the same type and electrical specifications. Disconnect the device before any intervention. For any other repairs, contact a qualified technician.
How to clean the DSP-6?
Use a soft, slightly damp cloth. Avoid water entering the inside of the device. Do not use solvents such as benzene or thinner.
Is the DSP-6 compatible with conventional light dimmers?
No, do not connect the device to a light dimmer. The DSP-6 must be connected directly to the mains with a suitable power supply (single-phase or three-phase 230V).

User questions about DSP-6 BEGLEC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Digital lighting control system in PDF format for free! Find your manual DSP-6 - BEGLEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSP-6 by BEGLEC.

USER MANUAL DSP-6 BEGLEC

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BEGLEC

Model : DSP-6

Category : Digital lighting control system