ULX-12100S - Washing machine Ulsonix - Free user manual and instructions

USER MANUAL ULX-12100S Ulsonix

This User Manual has been translated for your convenience using machine translation. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. The official User Manual is the English version. Any discrepancies or differences created in the translation are not binding and have no legal effect for compliance or enforcement purposes. If any questions arise related to the accuracy of the information contained in the User Manual, please refer to the English version of those contents which is the official version.

Technical data

Parameter description		Parameter value
Product name		Cordless sweeper
Model		ULX-12100S
Power supply from mains		Chargerinput: 230V 50Hzoutput: 12V 15A 50Hz
Battery		Lead-acid 12V 100Ah ~5h worktime
Rated power [W]	Brushes	120
	Vacuum	50
Protection class		I
Dimensions [Width x Depth x Height; mm]	Folded	930 x 1000 x 530
	Ready to work	930 x 1200 x 950
Weight [kg]		90
Efficiency [m3/h]		4800
Dirt container capacity [L]		35
Water tank capacity [L]		5

1. General description

The user manual is designed to assist in the safe and trouble-free use of the device. The product is designed and manufactured in accordance with strict technical guidelines, using state-of-the-art technologies and components. Additionally, it is produced in compliance with the most stringent quality standards.

DO NOT USE THE DEVICE UNLESS YOU HAVE THOROUGHLY READ AND UNDERSTOOD THIS USER MANUAL.

To increase the product life of the device and to ensure trouble-free operation, use it in accordance with this user manual and regularly perform maintenance tasks. The technical data and specifications in this user manual are up to date. The manufacturer reserves the right to make changes associated with quality improvement. The device is designed to reduce noise emission risks to a minimum, taking into account technological progress and noise reduction opportunities.

Legend

CE	The product satisfies the relevant safety standards.
	Read instructions before use.
	The product must be recycled.
	WARNING! or CAUTION! or REMEMBER! Applicable to the given situation.(general warning sign)
	Wear foot protection.
	Wear protective clothing.
	ATTENTION! Electric shock warning!
	ATTENTION! Rotating parts, entanglement hazard!
	WARNING! Toxic substances, danger of poisoning! (concerns the battery)

Protect against rain and excessive moisture.

PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may differ from the actual product.

2. Usage safety

ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury or even death.

The terms "device" or "product" are used in the warnings and instructions to refer to the:

Cordless sweeper

2.1. Electrical safety

a) The plug must fit the socket. Do not modify the plug in any way. Using original plugs and matching sockets reduces the risk of electric shock.
b) Use the cable only for its designated use. Never use it to carry the device or to pull the plug out of a socket. Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled cables increase the risk of electric shock.
c) Do not use the device if the power cord is damaged or shows obvious signs of wear. A damaged power cord should be replaced by a qualified electrician or the manufacturer's service centre.
d) To avoid electric shock, do not immerse the cord, plug or device in water or other liquids. Do not use the device on wet surfaces.
e) ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in water or other liquids.
f) Do not use in very humid environments or in the direct vicinity of water tanks.
g) Before the first use, please check whether the main voltage type and current comply with the indicated data on the type plate.

2.2. Safety in the workplace

a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to accidents. Try to think ahead, observe what is going on and use common sense when working with the device.
b) If you discover damage or irregular operation, immediately switch the device off and report it to a supervisor without delay.
c) If there are any doubts as to the correct operation of the device, contact the manufacturer's support service.
d) Only the manufacturer's service point may repair the device. Do not attempt any repairs independently!
e) In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one intended for use on live electrical devices) to put it out.
f) Children or unauthorised persons are forbidden to enter a work station. A distraction may result in loss of control over the device.
g) Use the device in a well-ventilated space.
h) The device produces dust and debris during operation. It is important to protect bystanders from their harmful effects.
i) Regularly inspect the condition of the safety labels. If the labels are illegible, they must be replaced.
j) Please keep this manual available for future reference. If this device is passed on to a third party, the manual must be passed on with it.
k) Keep packaging elements and small assembly parts in a place not available to children.
I) Keep the device away from children and animals.

Remember! When using the device, protect children and other bystanders.

2.3. Personal safety

a) Do not use the device when tired, ill or under the influence of alcohol, narcotics or medication which can significantly impair the ability to operate the device.
b) The machine may be operated by physically fit persons who are able to handle the machine, are properly trained, who have reviewed this operating manual and have received training in occupational health and safety.
c) The machine is not designed to be handled by persons (including children) with limited mental and sensory functions or persons lacking relevant

experience and/ or knowledge unless they are supervised by a person responsible for their safety or they have received instruction on how to operate the machine.

d) When working with the device, use common sense and stay alert. Temporary loss of concentration while using the device may lead to serious injuries.
e) To prevent the device from accidentally switching on, make sure the switch is on the OFF position before connecting to a power source.
f) Do not overestimate your abilities. When using the device, keep your balance and remain stable at all times. This will ensure better control over the device in unexpected situations.
g) Do not wear loose clothing or jewelry. Keep hair, clothes and gloves away from moving parts. Loose clothing, jewelry or long hair may get caught in moving parts.
h) If suction is to be connected to the device, check all connections and make sure they are tight. Using a dedusting system may reduce the risks associated with dust.
i) Remove all adjusting tools or spanners before turning the device on. A tool or spanner left in the revolving part of the device may cause injury.
j) The device is not a toy. Children must be supervised to ensure that they do not play with the device.
k) Do not put your hands or other items inside the device while it is in use!
I) The operator of the equipment is required to wear full footwear that protects the feet and long trousers.

2.4. Safe device use

a) Do not overload the device. Use the appropriate tools for the given task. A correctly-selected device will perform the task for which it was designed better and in a safer manner.
b) Do not use the device if the "ON/OFF" switch does not function properly (does not switch the device on and off). Devices which cannot be switched on and off using the ON/OFF switch are hazardous, should not be operated and must be repaired.
c) Disconnect the device from the power supply before commencement of adjustment, cleaning and maintenance. Such a preventive measure reduces the risk of accidental activation.
d) When not in use, store in a safe place, away from children and people not familiar with the device who have not read the user manual. The device may pose a hazard in the hands of inexperienced users.
e) Keep the device in perfect technical condition. Before each use check for general damage, especially check moving components for cracked parts or elements, and for any other conditions which may impact the safe operation

of the device. If damage is discovered, hand over the device for repair before use.

f) Keep the device out of the reach of children.

g) Device repair or maintenance should be carried out by qualified persons, only using original spare parts. This will ensure safe use.

h) To ensure the operational integrity of the device, do not remove factory-fitted guards and do not loosen any screws.

i) When transporting and handling the device between the warehouse and the destination, observe the occupational health and safety principles for manual transport operations which apply in the country where the device will be used.

j) Avoid situations where the device stops working during use due to excessive loading. This may result in overheating of the drive elements and damage to the device.

k) Do not touch articulated parts or accessories unless the device has been disconnected from the power source.

I) Do not leave this appliance unattended while it is in use.

m) Clean the device regularly to prevent stubborn grime from accumulating.

n) The specified vibrations emission was measured using standard measurement methods. Vibrations emissions may change if the device is used in different surroundings.

o) The air supplied to the device should be dry, clean and free of contamination. Contamination can clog the conduits and lead to damage to the device and its components.

p) Do not touch any moving parts or accessories unless the device has been disconnected from the compressed air supply.

q) Do not cover the air intake and outlet.

r) It is forbidden to interfere with the structure of the device in order to change its parameters or construction.

s) Keep the device away from sources of fire and heat.

t) Do not cover the ventilation openings!

u) Do not use or park the machine on surfaces with an incline of more than 40° . Take special care when working around edges, stairs, inclines and descents.

v) Objects such as ropes, cords, straps, as well as hot, glowing or flammable or toxic objects must not be swept.

ATTENTION! Despite the safe design of the device and its protective features, and despite the use of additional elements protecting the operator, there is still a slight risk of accident or injury when using the device. Stay alert and use common sense when using the device.

3. Use guidelines

The product is designed for cleaning flat surfaces, especially where performance is needed over large areas (workshops, warehouses, pavements, car parks, etc.). The user is liable for any damage resulting from unintended use of the device.

3.1. Device description

A. Steering handle
B. Control panel
C. Dirt container/air filter
D. Air filter cleaning lever
E. Brush set height adjustment knob 1

F. Water container filler
G. Brush set height adjustment knob 2
H. Spray nozzle (against dust)
I. Swivel guide wheel
J. Wheel (x2)

CONTROL PANEL:

K. Ignition (OFF-ON-ON with water spray)
L. Battery voltage display
M. Brush set drive thermal switch 1
N. Brush set drive 2/suction thermal switch
O. Brush set 1 power and suction switch
P. Brush set 2 power switch
Q. Battery charger connection socket
R. Dirt box/air filter clamp

3.2. Preparing for use

APPLIANCE LOCATION

The ambient temperature must not exceed 40° C and the relative humidity must not exceed 85%, protect the unit from rain. Do not cover the appliance during operation or charging! Keep the device away from all hot surfaces and fire.

Always use the device on a stable, dry surface and out of the reach of children and persons with reduced mental, sensory and intellectual functions. When charging the battery, the device should be positioned in such a way that the mains plug can be reached at any time. Make sure that the energy supply of the device corresponds to the data given on the rating plate!

ASSEMBLING THE APPLIANCE

The appliance is supplied ready for use, however, before the first start-up it is recommended that the appliance is connected to a charger for possible recharging. To do this, first connect the cable with the plug to the corresponding cable with socket from the charger, and then connect the cable with the plug from the charger to the socket on the control panel of the unit. The display on the control panel shows the current battery voltage (fully charged >14V).

IMPORTANT: the unit can only be charged when switched off (ignition key in the "OFF" position) and with the cover closed.

3.3. Device use

a) Unfold the control handle and adjust its height according to the operator's preference.
b) Ensure that the dirt container is empty and the air filter is fitted.
c) (c) [Optional] Pour water into the container if using dust spray).
d) Adjust the height of the brushes.
e) Start the machine by setting the ignition key to the "ON" or (optional) "ON+water mist spray" position.

IMPORTANT: do not use the water spray function when the water tank is empty!

f) Switch on the appropriate brush sets.

g) You can start working with the device...

TIPS FOR OPERATING THE MACHINE:

• Make sure that the machine's battery is charged before each use. Even if you use the machine infrequently or do not use it for a long period, connect the machine to the charger once in a while (e.g., once a month).
• Maintain an even moving speed during operation - ideally not exceeding 5 km/h.
• Clean the air filter every 30-40 min. work, using the lever.
• Empty the dirt container regularly, as well as every time you finish working with the machine.
• If the thickness of the dirt exceeds 2 mm, it may be necessary to drive over the surface several times to clean it more thoroughly.

• In case of heavy dusting, the use of a water spraying is recommended.
- If the machine is not used for a long time, empty the water from the tank.

3.4. Cleaning and maintenance

a) Unplug the mains plug and allow the device to cool completely before each cleaning, adjustment or replacement of accessories, or if the device is not being used. Wait for the rotating elements to stop.
b) Use only non-corrosive cleaners to clean the surface.
c) Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
d) Do not spray the device with a water jet or submerge it in water.
e) Do not allow water to get inside the device through vents in the housing of the device.
f) Clean the vents with a brush and compressed air.
g) The device must be regularly inspected to check its technical efficiency and spot any damage - check the drive belt (every 40 operating hours); the motor carbon brushes (every 500 operating hours); the condition of the cleaning brushes (every 1,500 operating hours).
h) Clean the air filter regularly (every 8 operating hours) - by unscrewing it from the dirt container and blowing it with compressed air at a not too high pressure. If the filter is excessively dirty, replace it with a new one (\~40 operating hours).
i) Use a soft, damp cloth for cleaning.
j) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they may damage the surface material of the appliance.
k) Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or other chemical substances because it may damage the device.

SAFE REMOVAL OF BATTERIES AND RECHARGEABLE BATTERIES

A 12V 100Ah battery is installed in the units (under the top cover).

Used batteries should be removed from the unit following the same procedure as for installation:

• The unit should be switched off and the charger disconnected.
• Remove the cover.
• Disconnect the clamps from the battery.
  • Unscrew the battery mounting bracket.
• Remove the battery.

Recycle batteries with the appropriate organization or company.

DISPOSING OF USED DEVICES

Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device recycling and collection point. Check the symbol on the product, instruction manual and packaging. The plastics used to construct the device can be recycled in accordance with their markings. By choosing to recycle you are making a significant contribution to the protection of our environment.

Contact local authorities for information on your local recycling facility.

APPARATETS PLACERING

PLAATS VAN HET APPARAAT

MONTEREN VAN HET APPARAAT

APPARATENS PLACERING

For the disposal of the device please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.