KH 1596 TWILIGHT SWITCH - Twilight switch TRONIC - Free user manual and instructions

Product type	Twilight switch
Brand	TRONIC
Model	KH 1596
Rated voltage	230 V ~ 50 Hz
Maximum power	2300 W (10 A)
Operating temperature	0 °C to 35 °C
Photocell	Yes
Light sensitivity regulator	Yes, adjustable with a screwdriver
Indicator light	Red LED function control
Available functions	Timer (2, 4, 6, 8, 10, 12 h), Random, Manual On/Off, Dusk to Dawn switching
Built-in timer	Yes, with Random synchronization circuit
Random switching	Yes, to simulate presence
Burglary protection	Yes, via Random function
Cleaning	Soft, clean cloth dampened with water
Safety	Do not disassemble, disconnect power before cleaning, repair by a qualified professional
Compliance	CE
Manufacturer	Kompernaß Handelsgesellschaft mbH, Germany
Device type	KH 1596
Warranty	Damage caused by improper handling excluded

Frequently Asked Questions - KH 1596 TWILIGHT SWITCH TRONIC

How to set the timer on the TRONIC KH 1596 twilight switch?

Set the Random switch to OFF, select the desired duration (2, 4, 6, 8, 10 or 12 hours) with the rotary switch, then plug in the device. The device will turn on at dusk and turn off after the set time or at dawn.

How to use the Random function to simulate presence?

Set the Random switch to ON, select a duration with the rotary switch, then plug in the device. The device will turn on and off randomly during this duration, giving the impression that the house is occupied.

What to do if the switch does not turn on or does not react to light?

Check that the rotary switch is in a position other than OFF. Make sure the photocell receives direct daylight and is not obscured. If the problem persists, adjust the light sensitivity with a screwdriver by turning the regulator clockwise until the indicator light comes on.

What is the maximum power of devices I can connect?

The total power of connected devices must not exceed 2300 W (10 A). For continuous use, it is recommended not to exceed 660 W.

How to clean the twilight switch?

First disconnect the power. Clean the device with a soft, clean cloth slightly dampened with water. Do not use abrasive products or solvents.

Can I repair the switch myself if it breaks?

No, do not attempt to repair the device yourself. Contact a qualified professional or the after-sales service to avoid any risk of electric shock.

How to adjust the light sensitivity?

Set the rotary switch to Dusk to Dawn. With a slotted screwdriver, turn the sensitivity regulator fully counterclockwise, then turn it a few millimeters clockwise until the device turns on. Wait 5 seconds between each adjustment.

Are the settings retained in case of a power outage?

Yes, the timer or Random mode settings remain saved when the device turns off at dawn. To clear all settings, cut off power for at least 15 seconds.

Can I plug an iron into this switch?

No, it is not recommended to connect devices that require constant supervision (such as an iron) because the switch could turn them off automatically, posing a fire risk.

Where to place the twilight switch for optimal operation?

Install the switch in an outlet exposed to direct daylight. Avoid artificial light sources (lamps, etc.) near the photocell, as they could affect its operation.

USER MANUAL KH 1596 TWILIGHT SWITCH TRONIC

Carga admissivel: 10 A, max. 2300 W

Temperatura de service: 0^ - 35^

Capacity: 10 A, max. 2300 W

Operating temperature: 0^ - 35^

Safety instructions

• Do not dismantle a twilight switch since there is a danger of an electric shock.
• If liquid should penetrate the device, disconnect it from the power supply immediately to avoid the danger of a fire or an electric shock.
• Do not try to repair the twilight switch yourself if it should be faulty. If it does not function correctly or is in need of repair, please contact our service partner near you.
• Before cleaning the twilight switch, disconnect it from the power supply. Use a soft, clean, damp cloth for cleaning purposes.
• Make sure that any appliances to be connected to the twilight switch have the CE mark.
• Do not connect any electrical appliances that should only be used under supervision (e.g. iron etc.) to the twilight switch!
• Note: The current consumption of the appliances you wish to connect to the twilight switch should not be greater than 660 Watts. Never connect an appliance with a current consumption of more than 2300 Watts to the twilight switch!
• Warranty or liability will not be accepted for damage to the device resulting from improper handling.

Operating instructions

Congratulations on your purchase of a Tronic twilight switch with integrated timer!

Your Tronic twilight switch with integrated timer and random time switch is easy to use and fits any socket. The device can switch electrical appliances of all kinds (e.g. lamps, stereo systems etc.) on and off, depending on a preset time interval or the given light conditions. If the random function is activated, the twilight switch switches the appliance connected on or off at random intervals.

1 Photo cell
Light sensitivity regulator
3 Random switch
4 Rotary button for function selection
Function control lamp

Function control lamp

The red function control lamp on the front of the twilight switch lights up as soon as it is switched on using the function selection switch (ON).

Your new Tronic twilight switch has the following five functions available:

1. Timer switch
2. Random function
3. ON
4. OFF
5. Twilight switching

Note: If you would like to use the timer switch or the random function, remove the twilight switch from the socket before carrying out the settings.

Operation and setting

1. Timer switch

The timer switch function switches on the appliance connected at dusk for a period pre-set by the user. The appliance switches off automatically when the set time has passed or dawn breaks (whichever happens first).

1. Set the random switch to "OFF".
2. Use the rotary function selection button to set the required period (2,4,6, 8,10 or 12 hours).
3. Connect the required appliance to the twilight switch.

2. Random function

The random function is particularly useful when no-one is at home. Your twilight switch can protect you from burglars by making your house seem occupied, e.g. when you are on holiday. The appliance connected switches on and off automatically during the period set at random intervals (or with increasing daylight level).

1. Set the random switch to "ON".
2. Use the rotary function selection button to set the required period (2,4,6, 8,10 or 12 hours)
3. Connect the required appliance to the twilight switch.

3.ON (manual switching on)

Set the function selection button to "ON". Your twilight switch will now remain on permanently.

4. OFF (manual switching off)

Set the function selection button to "OFF". Your twilight switch will now remain off permanently.

5. Twilight switching

When this function is set, the appliance connected switches on automatically as daylight fades at dusk and off again as the daylight level increases during the dawn hours.

1. Set the function selection button to "Dusk to Dawn".
2. Connect the required appliance to the twilight switch.

Setting the light sensitivity level

You can set the sensitivity of the timer using the light sensitivity regulator on the device. A slot screwdriver is required for this.

1. Set the function selection button to "Dusk to Dawn".
2. First, turn the sensitivity regulator anticlockwise using the slot screwdriver.
3. Now turn the regulator a few millimetres clockwise at full daylight level. The further you turn the regulator clockwise, the earlier the timer will switch on. Wait five seconds for the timer to switch on.
4. If the timer does not switch on, turn the regulator a few millimetres further clockwise and wait for another five seconds. Repeat the procedure until the appliance connected to the twilight switch switches on.
5. If the function control lamp does not switch off, repeat step 3 until it does.

Note: The settings of the timer switch or the random mode remain stored when the device switches off at dawn. To delete all the settings you have made, remove the device from the power supply for at least 15 seconds.

Important:

• The twilight switch should only be inserted in sockets where it is subject to direct sunlight.
• The photo cell orientates itself towards environmental brightness. For this reason, make sure that the twilight switch is not influenced by interior or

exterior lighting. While your twilight switch is in operation, the light sensitivity of the photo cell is automatically reduced to prevent a lamp switched on by the twilight switch influencing the function of the photo cell.
- If you would like to switch an appliance connected to the twilight switch on or off, you must do this only on the appliance itself and not by switching the twilight switch off.

Declaration of conformity

We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with all the applicable international safety standards, regulations and EC directives.

Device type/Type: KH 1596

Bochum. 30.04.2003

Hans Kompernaß

• Managing Director