UR 1250 - Remote control VIVANCO - Free user manual and instructions

Product type	Universal remote control
Brand	VIVANCO
Model	UR 1250
Power supply	2 AAA alkaline batteries (R03, UM4)
Batteries included	Not included
Compatibility	TVs, SAT/DVB, DVD/Blu-ray
Programming	Direct code entry, manual and automatic search
Code	3-digit code
Warranty	2 years (free replacement excluding wear and missing codes)
LED indicator	LED (light indicator)
Mute function	Yes, adjustable via dedicated button
Volume lock	Possible on a specific device (OK+5 to lock)
Factory reset	Yes, by pressing OK+0 until flashing
Manual code search	Press POWER repeatedly
Automatic code search	Sends ON/OFF signals every 2 seconds
Code identification	OK+1, OK+2, OK+3 for hundreds, tens, units
Care and cleaning	Wipe with a soft dry cloth. Do not use abrasive products.
Safety	Do not expose to moisture or extreme temperatures.
Not compatible	Devices operating at 400 kHz

Frequently Asked Questions - UR 1250 VIVANCO

How to install batteries in the VIVANCO UR 1250 remote control?

Open the battery compartment on the back by pushing the tab down. Insert 2 AAA alkaline batteries (R03) respecting polarity (+/-). Close the compartment. Press POWER to check: the LED should flash.

How to program the remote control with a direct code?

Press OK and the device button (e.g., TV) simultaneously until the LED stays on. Enter the 3-digit code (e.g., 436 for Panasonic). The LED turns off. Test the command. If it does not work, try another code.

How to automatically search for a code for my TV?

Turn on the device and set it to a channel. Press OK and the device button (e.g., TV) for more than 3 seconds until the LED turns off. Point the remote at the device: it sends ON/OFF signals every 2 seconds. When the device reacts, press any button except OK to finish.

How to perform a manual code search?

Turn on the device. Press OK and the device button (e.g., TV) until the LED stays on. Point the remote and briefly press POWER: the LED flashes. Press POWER every second until the device reacts. You can reverse direction with OK then POWER. When correct, press the device button to confirm.

How to find the currently programmed code?

Press the device button (e.g., TV). Then press OK+1 for hundreds, OK+2 for tens, OK+3 for units. Count the LED flashes: 4 flashes = 4, no flash = 0. Example: 4,3,6 gives code 436.

How to reset the remote control to factory settings?

Press OK and the 0 (zero) button simultaneously until the LED flashes. All settings are cleared and the remote returns to its initial state.

How to lock the volume on a specific device?

Press the button of the selected device (e.g., TV). To lock, press OK+5. To unlock, use OK+6. This allows controlling the volume of a single device even when changing modes.

What to do if the remote control does not respond after trying a code?

First check the batteries: replace if necessary. Make sure you are within the correct distance range (about 8-10 meters). If the problem persists, try an automatic code search. If nothing works, reset the remote (OK+0).

Is the remote control compatible with all devices?

No, it is not compatible with devices operating at a frequency of 400 kHz. For others, use the provided code list or code search. Check the brand and model.

How to clean and maintain the UR 1250 remote control?

Use a soft dry cloth to wipe the casing. Never use abrasive products, solvents, or liquid cleaners. Avoid exposure to moisture and extreme temperatures.

USER MANUAL UR 1250 VIVANCO

Inserting the batteries

Open the battery compartment on the underside of the remote. Then insert 2 AAA batteries. Make sure that the polarity is correct: the "+" and "-" markings on the batteries and in the compartment must match.

• To check functionality, press the POWER button. If everything is correct, the red lamp flickers when the button is pressed.

Adapting to appliances

In order to control your appliances, you must adapt or set the remote control to them. There are two ways of doing so:

Direct control code entry

Panama¶	003,004,010,023,166,296,308,309,332,37
Panashibat	376¶
Panasonict	023,050,065,066,067,068,102,125,142,143
	316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Example: Setting to control a Panasonic television set:

1. The attached list gives, for example, the Panasonic Code 436.
2. Please make sure you have selected the code from the correct list for television sets (TV).
3. Press the OK button and an appliance button, e.g.

TV, simultaneously until the lamp (LED) lights constantly.

1. Then press the number buttons (e.g. 436) in sequence.
2. Once the numbers have been entered, the lamp goes out and the remote control is ready to control your appliance.
3. Finally, test the control code setting by trying to control, in this example, your television set. If it does not work at all or not correctly, try a different code from the list or the code search (see below).

To set the remote control for other appliances, proceed in the same way. Instead of the TV appliance button, press another button, e.g. SAT/DVB (SAT, DECODER) or DVD/BLU RAY (UR 1300 only).

• You terminate the mode by pressing any device button or by code input interruption of more than 10 seconds.

If the lamp flashes twice, the code was not accepted and code input can be started again.

Code search

If the brand of your appliance is not in the list or none of the codes given fits, we recommend a code search.

Manual code search

1. Switch on the appliance to be controlled. Program is running.
2. To prepare code search, press the OK button and the appliance button, e.g. TV, simultaneously until the lamp (LED) lights constantly.
3. Then point the remote control at the appliance to be controlled.
4. Briefly press the ON/OFF POWER button once. The lamp (LED) blinks.
5. Press the ON/OFF POWER button about every 1 second so often until the appliance, e.g. your TV reacts by power off.
6. You can invert search direction by pressing the OK button and then POWER again.
7. If your appliance has switched itself off, you must switch it back on again, e.g. on the appliance or with the original remote control, to

continue searching.

• When your appliance reacts you can also try out other buttons without interrupting the search. If some buttons do not work properly, simply continue searching by pressing ON/OFF POWER again.
• When your appliance reacts correctly, press the appliance button, e.g. TV for end of searching and saving of found code. The lamp (LED) goes out.
• The last code entered remains stored. The search stops after approx. 30 seconds of inactivity.

Automatic code search

1. Switch on the appliance to be controlled. Program is running.
2. To start the code search, press the OK button and the appliance button, e.g. TV, simultaneously for more than 3 seconds until the lamp (LED) goes off briefly.
3. Then point the remote control at the appliance to be controlled while the remote control emits a different ON/OFF signal every 1-2 seconds.
4. You can reverse search direction at any time by pressing OK button.
5. When your appliance reacts, press any button except OK within 1-2 seconds, to end the search and save code.
6. If you ended the search too late, continue to search using the Manual Code Search (see above).
7. Finally, test the control code setting by trying to control, for example, your DVD appliance (UR 1300 only). If it does not work correctly, please try the code search again. The code search then begins with the found code in the sequence.
8. Remember to switch your appliance, e.g. DVD, back on again if you wish to continue searching.

Code identification

You can read off the 3-digit codes you have set at any time:

1. Press the appliance button of the appliance whose code you want to read off, e.g., TV.
2. Press the OK button and 1, 2, or 3 simultaneously, depending on the part of the code you want to read off. For example, if you press OK+1 and the code 436 (in this example) has been set, the lamp blinks 4 times after OK+1 is pressed to indicate that the hundred figure is 4. All you have to do is count. The ten figure is indicated after pressing OK+2, e.g., it blinks 3 times for the 3 in 436. The one figure is indicated after OK+3 is pressed, e.g., it blinks 6 times for the 6 in 436.
3. There will be no flash in case of 0 indication.

Assigning volume and mute exclusively to one appliance

Press the appliance button of the appliance that you always want to use for volume control, e.g., TV. To lock, press OK + 5. To unlock, press OK + 6.

Reset To Factory Settings

Press OK+0 button until the lamp blinks twice in order to reset the remote to factory settings.

Operation

You operate your universal remote control basically in exactly the same way as if you were using the original remote control. As the symbols on a universal remote control could differ from those on the original remote controls, you may have to try out all the buttons in order to find the right functions.

Specifications

Batteries: 2x AAA batteries, R03, UM4

Range: max. 7 m

Not for 400 kHz equipment

2-year works guarantee

Should your remote control cease to work within 2 years of purchasing, you will receive a free replacement from Vivanco. Exceptions: missing codes, deliberate destruction and normal wear and tear of the housing and buttons.

Panama¶	003,004,010,023,166,296,308,309,332,377
Panashiba¶	376¶
Panasonic¶	023,050,065,066,067,068,102,125,142,143316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama¶	003,004,010,023,166,296,308,309,332,37
Panashiba¶	376¶
Panasonic¶	023,050,065,066,067,068,102,125,142,143
	316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Technical specifications

Batteries: 2 round batteries, R03, UM4, AAA

Range: max. 7 m

Panama¶	003,004,010,023,166,296,308,309,332,377
Panashibai¶	376¶
Panasonic¶	023,050,065,066,067,068,102,125,142,143,316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama¶	003,004,010,023,166,296,308,309,332,37
Panashibat	376¶
Panasonict	023,050,065,066,067,068,102,125,142,143
	316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama¶	003,004,010,023,166,296,308,309,332,37
Panashiba¶	376¶
Panasonic¶	023,050,065,066,067,068,102,125,142,143
	316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama¶	003,004,010,023,166,296,308,309,332,37
Panashibat	376¶
Panasonict	023,050,065,066,067,068,102,125,142,143
	316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama	003,004,010,023,166,296,308,309,332,37
Panashiba	376
Panasonic	023,050,065,066,067,068,102,125,142,143, 316,332,356,385,386,397,436
Panavision	023,332

Panama	003,004,010,023,166,296,308,309,332,37'
Panashiba	376
Panasonic	023,050,065,066,067,068,102,125,142,141 316,332,356,385,386,397,436
Panavision	023,332

Example: setting the remote control for a Panasonic TV:

Panama¶	003,004,010,023,166,296,308,309,332,37'
Panashiba¶	376¶
Panasonic¶	023,050,065,066,067,068,102,125,142,143'
	316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama	003,004,010,023,166,296,308,309,332,37
Panashiba	376
Panasonic	023,050,065,066,067,068,102,125,142,143
	316,332,356,385,386,397,436
Panavision	023,332

Example: setting the remote control for a Panasonic TV.

1. From the enclosed list, select, e.g., code 436 for Panasonic. Please make sure that the code you have selected is for the TV set. 2. Press the OK button and the button corresponding to the type of device, e.g., the TV button, simultaneously until the LED lights up with a steady glow. 3. Then enter the code digits sequentially (e.g., 436). 4. After the code is entered, the LED will go out and the remote control is ready to operate your device.

1. Finally, check the programmed code, e.g., by trying to operate your TV. If it does not work or works incorrectly, try using the next code from the list or the code search, see below.

To set your remote control for other devices, repeat the above procedure. Only instead of the TV button, press the SAT/DVB button (SAT, DECODER) or DVD/BLU-RAY (only UR 1300).

The code can be programmed by pressing any button corresponding to the type of device, or by making a pause of more than 10 seconds.

Press 2 times if you have entered the wrong code. After that, the code can be corrected.

Code search

If the device code is not listed in the list of codes, or if none of the listed codes work, then in this case it is recommended to search for the code.

Manual code search

1. Please turn on the controlled device. The program is running.
2. Press and hold the OK button and the button corresponding to the device type, e.g., the TV button, until the LED lights up with a steady glow.
3. Then point the remote control at the controlled device. 4. Press POWER once briefly (device on/off). The LED blinks.
4. Repeatedly, about every second, press the POWER button (device on/off) until the device responds.
5. You can change the search direction by pressing

OK, and then press POWER again.

• If the device turns off, then you need, for example, on the device or with the help of the remote control, to turn it on again for further search.
• If your device responds, then you can also try other keys without leaving the search mode. If some keys do not function correctly, then the search should simply be continued with the help of POWER.
• If your device responds correctly, then press the device key TV and stop the search in this way. The LED goes out.
• After approx. 30 sec. of inactivity, the search is interrupted.

Automatic code search

1. Please wait, the device is being controlled so that one of the TV programs works.
2. Press the OK button, then press the button corresponding to the device type, e.g., TV, for more than 3 seconds, so that the indicator light (CIV) briefly turns off.
3. Then point the remote control at the device to be controlled, while the remote control sends a different on/off signal every 2 seconds. - You can change the search direction at any time by pressing the OK button.
4. If your device responds, press any button except OK to end the code search. 5. Finally, check the programmed control code. If it does not function correctly, try the code search again, please, once more. The code search starts in this case with the next code. - Do not forget your device if you want to continue the search, press the button on the device again.

Code identification

You can read the programmed three-digit code at any time:

1. Press the button on the device on which you want to read the code, e.g., TV.
2. Press OK additionally 1, 2, or 3, depending on which digit of the code you want to select. For example, if you press OK+1, and the entered code is, for example, 4 3 6, then the indicator light blinks 4 times, showing the value 4 for the hundreds digit. You just need to count. Pressing OK+2 gives the value of the tens digit, e.g., it blinks 3 times, showing 3 from 436. And pressing OK+3 shows the value of the units digit, e.g., it blinks 6 times, showing 6 from 436. - If the value is zero, the indicator does not blink.

Identify the volume and mute functions for one device

Press the device button of the device you always use for volume control, e.g., TV. Then for the mute function press the button OK+5. For the volume function press the button OK+6.

Factory settings

By pressing and holding OK+0 (the indicator should blink 2 times) all settings are reset to the standard factory settings.

Control

You control your devices practically in the same way as you are familiar with from your original remote controls. The buttons on the remote control are similar to those of your original remote controls. They differ from the buttons of your original remote controls, possibly, in that for some functions you may need

Technical data

Battery: 2 x Mignon batteries, R03, UM4, AAA

Operating range: max. 7 m

Do not use with devices of 400 kHz.

Manufacturer's warranty: 2 years

If within 2 years after purchase the universal remote control fails to operate from the set, in such case you will receive a free replacement. Exclusions: missing keys, deliberate destruction and normal wear of the housing and keys.

(GR) Operating instructions

Remote control

To insert the batteries into the remote control, open the battery compartment on the back of the device, insert the batteries according to the polarity markings, and close the compartment. The remote control is ready for use. To check the operation, press the POWER button. The LED lights up if the operation is correct.

Devices that can be controlled

In order to be able to control your devices, you must set the remote control appropriately for each device. There are two possibilities:

Direct code entry

Panama¶	003,004,010,023,166,296,308,309,332,37'
Panashibai¶	376¶
Panasonic¶	023,050,065,066,067,068,102,125,142,144;316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama	003,004,010,023,166,296,308,309,332,37
Panashiba	376
Panasonic	023,050,065,066,067,068,102,125,142,144;316,332,356,385,386,397,436
Panavision	023,332

Panama	003,004,010,023,166,296,308,309,332,37
Panashiba	376
Panasonic	023,050,065,066,067,068,102,125,142,144;316,332,356,385,386,397,436
Panavision	023,332

Panama¶	003,004,010,023,166,296,308,309,332,37
Panashiba¶	376¶
Panasonic¶	023,050,065,066,067,068,102,125,142,144; 316,332,356,385,386,397,436¶
Panavision¶	023,332¶

Panama	003,004,010,023,166,296,308,309,332,37
Panashiba	376
Panasonic	023,050,065,066,067,068,102,125,142,144;316,332,356,385,386,397,436
Panavision	023,332