59G806 - Saw Graphite - Free user manual and instructions
Find the device manual for free 59G806 Graphite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Graphite |
| Model | 59G806 |
| Product Type | Circular Saw |
| Power Supply | Electric, 230 V, 50 Hz |
| Power | 1200 W |
| Rotation Speed | 4500 rpm |
| Blade Diameter | 165 mm |
| Maximum Cutting Depth | 55 mm (at 90°) |
| Weight | 4 kg |
| Dimensions (L x W x H) | 30 x 20 x 20 cm |
| Main Functions | Cutting wood, plastic, non-ferrous metals |
| Maintenance and Cleaning | Clean the blade and housing after each use; oil moving parts |
| Safety | Retractable blade guard, lockable switch, blade brake |
| Spare Parts and Repairability | Replacement blades available (165 mm), motor carbon brushes, switch |
| General Information | 2-year warranty, domestic and light professional use |
Frequently Asked Questions - 59G806 Graphite
How to change the blade on my Graphite 59G806 saw?
Unplug the saw, press the spindle lock, loosen the center screw with the supplied Allen key, remove the old blade, install the new one respecting the rotation direction, tighten the screw firmly.
What is the maximum cutting depth of this saw?
The maximum cutting depth is 55 mm at 90 degrees. For bevel cuts, the depth is reduced (e.g., 38 mm at 45°).
What should I do if the saw does not start?
Check the power outlet and cord, reset the saw's circuit breaker (red button on the housing), ensure the lockable switch is unlocked. If nothing changes, the carbon brushes may be worn.
How to adjust the bevel angle?
Loosen the bevel lock knob at the front of the base, tilt the base to the desired angle (guide from 0° to 45°), tighten the knob firmly.
What type of blade should I use to cut metal?
Use a blade with carbide or high-speed steel (HSS) teeth specific for metals, with a high tooth count (40-60 teeth). Make sure to use a lubricant or cutting wax.
How to maintain the saw motor?
Regularly clean the ventilation slots with a brush to prevent dust buildup. Check and replace the carbon brushes every 50 hours of use or when excessive sparking occurs.
The saw sparks, is this normal?
A slight sparking at the carbon brushes is normal, especially at startup. If sparks are abundant or continuous, the brushes are likely worn and need replacement.
How to change the motor carbon brushes?
Unplug the saw. Locate the plastic caps on each side of the motor housing, unscrew them, remove the old brushes, insert the new ones correctly orienting the contact blade, screw the caps back on.
Can I use a blade of a different diameter?
No, only use blades of 165 mm diameter. A blade too large would touch the guard, too small would reduce cutting depth and safety.
Where to find the complete user manual?
The complete manual is available for free download at notice-facile.com for the Graphite 59G806 model. You can also request a translation by email.
User questions about 59G806 Graphite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 59G806 - Graphite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 59G806 by Graphite.
USER MANUAL 59G806 Graphite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Graphite
Model : 59G806
Category : Saw