58G017 - Saw Graphite - Free user manual and instructions
Find the device manual for free 58G017 Graphite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular saw |
| Brand | Graphite |
| Model | 58G017 |
| Power Supply | Mains electric (230 V) |
| Rated Power | 1200 W |
| Blade Diameter | 185 mm |
| Max Cutting Depth | 64 mm at 90°, 45 mm at 45° |
| No-load Speed | 5000 rpm |
| Dimensions (L × W × H) | 310 × 240 × 270 mm |
| Weight | 4.2 kg |
| Main Functions | Cross and longitudinal cutting of wood, plastic and soft metals |
| Depth Adjustment | Yes, tool-less |
| Angle Adjustment | From 0° to 45°, with preset stops |
| Protective Guard | Automatic moving guard |
| Parallel Guide | Included |
| Dust Bag | Yes, included |
| Maintenance and Cleaning | Regularly clean ventilation slots; lubricate moving parts |
| Safety | Blade brake, spindle lock, two-hand switch |
| Spare Parts and Repairability | Available from the manufacturer or authorized dealers |
| General Information | 2-year warranty, CE compliant |
Frequently Asked Questions - 58G017 Graphite
How to change the blade on my Graphite 58G017 saw?
Unplug the tool, press the spindle lock, then loosen the center screw with the provided wrench. Replace the blade and tighten securely.
What is the maximum cutting depth?
The maximum cutting depth is 64 mm at 90° and 45 mm at 45°.
Can I cut metal with this saw?
Yes, with a blade suitable for soft metals like aluminum. For steel, use a special blade and reduce speed.
How to adjust the cutting angle?
Loosen the angle adjustment lever, tilt the base to the desired angle (from 0° to 45°), then tighten the lever. Preset stops facilitate common angles.
The protective guard does not retract well, what to do?
Check that the guard is not obstructed by cutting residues. Clean it and lightly lubricate the pivots with silicone spray.
What is the power of this saw?
The Graphite 58G017 saw has a rated power of 1200 W.
Is the dust bag effective?
Yes, the integrated dust bag captures most of the chips. For optimal extraction, also connect an external vacuum to the provided adapter.
How to clean the saw after use?
Unplug the tool, remove the blade, and brush off residues. Clean the ventilation slots with a brush. Never use water or harsh solvents.
The saw vibrates a lot, is this normal?
Excessive vibration may indicate an unbalanced or improperly tightened blade. Check the blade mounting and condition. If the problem persists, consult a repair technician.
Where to find spare parts for model 58G017?
Spare parts are available from Graphite after-sales service or authorized dealers. You can also check the manual for references.
User questions about 58G017 Graphite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 58G017 - Graphite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 58G017 by Graphite.
USER MANUAL 58G017 Graphite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Graphite
Model : 58G017
Category : Saw