The Odette Plus - Range hood FABER - Free user manual and instructions

Product type	Wall-mounted decorative hood
Model	The Odette Plus
Brand	Faber
Dimensions (W x D x H)	90 cm x 50 cm x 60-100 cm (depending on installation)
Weight	Approximately 18 kg
Power supply	220-240 V ~ 50-60 Hz
Motor power	200 W
Max airflow rate	650 m³/h
Max noise level	65 dB(A)
Number of speeds	3 speeds + intensive
Lighting type	LED, 2 x 3 W
Filter type	Aluminum grease filter (washable) + charcoal filter (optional)
Evacuation mode	External evacuation (duct) or recirculation (with charcoal filter)
Duct diameter	150 mm
Controls	Touchpad with digital display
Special functions	Timer, automatic shut-off, filter saturation detection
Maintenance	Clean the grease filter every month; replace the charcoal filter every 6 months
Safety	Automatic shutdown in case of overheating, child lock
Spare parts	Available from authorized Faber dealers
Repairability	Repairability index: 8.3/10

Frequently Asked Questions - The Odette Plus FABER

How to install the Odette Plus hood?

Installation must be carried out by a qualified professional. Ensure safety distances: at least 65 cm above an electric hob and 75 cm for a gas hob. Use the provided wall plugs and screws. For external evacuation, connect the 150 mm diameter duct.

How to clean the grease filters?

The aluminum grease filters can be washed in the dishwasher (low temperature cycle) or by hand with hot water and detergent. Let them dry completely before reinstalling. Clean them every month to maintain hood efficiency.

When should the charcoal filter be replaced?

The charcoal filter must be replaced every 6 months, or more often if the hood is heavily used. It is not washable. A filter saturation indicator can alert you.

How to set the timer?

Press the Timer button (clock symbol) to activate the delayed shut-off mode. You can set a duration from 1 to 15 minutes. The hood will automatically turn off after this time.

The hood is noisy, is this normal?

The noise level varies by speed: approximately 45 dB at speed 1, up to 65 dB at intensive speed. If the noise is abnormal, check that the filters are clean and properly fixed, and that the exhaust duct is not blocked.

Can I use the hood in recirculation mode without external exhaust?

Yes, install an optional charcoal filter. The hood will purify the air and return it to the kitchen. Make sure the recirculation duct is properly oriented upwards or to the side.

How to reset the filter saturation indicator?

After cleaning or replacing the filters, press and hold the reset button (often the filter icon) for 3 seconds. The indicator light turns off.

What is the lighting power?

The hood is equipped with 2 LEDs of 3 W each, providing warm and even lighting of the cooking area. The LEDs are long-lasting and do not require replacement.

Where to find spare parts?

Spare parts (filters, bulbs, controls, etc.) are available from authorized Faber dealers or on the official website. Use your model reference to order.

The hood does not turn on, what to do?

Check the electrical supply (plug, fuse). If the problem persists, consult a professional. Do not attempt to repair it yourself.

USER MANUAL The Odette Plus FABER

For your own safety and to ensure proper operation of the appliance, please read this manual carefully before installation and operation. Keep these instructions together with the appliance, even if it is sold or transferred to third parties. It is important that users know all the appliance's operating and safety characteristics.

The cables must be connected by a trained technician.

• The manufacturer shall not be considered responsible for any injury or damage caused by improper installation or use.
• The minimum safety distance between the hob and the suction hood is 650 mm (some models may be fitted at a lower height; please see the paragraph relating to working dimensions and installation).
• If the instructions for installation of the gas hob specify a distance greater than the one indicated, this must be taken into account.
• Check that the mains power supply corresponds to the one indicated on the data plate affixed inside the hood.
• The cut-out devices must be installed in the fixed system according to wiring system

regulations.

• For Class I appliances, check that the domestic power supply is adequately earthed.
• Connect the hood to the flue using a pipe with a minimum diameter of 120 mm. The fumes must travel the shortest distance possible.
• All the air venting regulations must be complied with.
• Do not connect the ducting hood to flues that also carry combustion fumes (e.g. boilers, chimneys, etc.).
• If the hood is used in combination with non electric appliances (e.g. gas appliances), a sufficient level of ventilation must be guaranteed in the room to prevent any exhaust backflow. If the kitchen hood is used in combination with appliances that are not electrically powered, the negative pressure in the room must not exceed 0.04 mbar to avoid any risk of the fumes being sucked back into the room by the hood.
• The air must not be extracted through a flue that is also used as an exhaust flue for fumes from gas or other fuel powered combustion devices.
• If it is damaged, the power cable must be replaced by the manufacturer or by a service technician.
• Connect the plug to a socket that complies with current regulations and is in an accessible position.

As regards the technical and safety measures to be taken for exhausting fumes, it is important that the regulations set by local authorities be complied with scrupulously.

CAUTION: remove the protective films before installing the hood.

Only use screws and hardware of a sort suitable for the hood.

CAUTION: failure to install the screws or fixing devices as described in these instructions may mean there is a risk of electric shocks.

Do not look directly at the light through optical devices (binoculars, magnifying glasses...).

Do not flambé food under the hood: you might cause a fire.

This appliance may be used by children over the age of 8 years and by persons with limited psycho-physical and sensory abilities or with insufficient experience and knowledge, provided they are carefully supervised and instructed on how to use the appliance safely and on the dangers that it involves. Make sure that children are not allowed to play with the appliance. Cleaning and maintenance to be performed by the user must not be carried out by children, unless they are under supervision.

Supervise children, to make

sure they do not play with the appliance.

The appliance must not be used by persons (including children) with limited psycho-physical or sensory capacities or with insufficient experience and knowledge, unless they are carefully supervised and instructed.

Accessible parts may become extremely hot during the use of cooking appliances.

Clean and/or replace the filters after the period of time indicated (danger of fire). See the paragraph on Maintenance and cleaning.

The room must be adequately ventilated when the hood is used simultaneously with appliances that use gas or other fuels (not applicable to appliances that only discharge air into the room).

The symbol ☒ on the product or on its packaging indicates that the product must not be disposed of with the normal domestic waste. The product must be disposed of at a specialist re-cycling centre for electrical and electronic components. By making sure that this product is disposed of properly, you will help prevent possible negative consequences for the environment and for health that might result from its improper disposal. For more detailed information on how to re-cycle

this product, please contact your local municipal offices, local waste disposal service or the shop in which the product was purchased.

Declaration of Conformity

The manufacturer declares that this appliance with K-Link + Wi-Fi radio functionality complies with Directive 2014/53/EU.

The complete text of the EU declaration of conformity is available at the following link by searching for the product code:

"https://www.faberspa.com/en/product-documentation/"

This code can be found on the label located inside the product.

Fre-quency bands	Maximum transmit-ted power
2.4 GHz 100 mW max.
5 GHz 100 mW max.

2. USE

• The suction hood has been designed exclusively for domestic use, to eliminate kitchen odours.
• Never use the hood for purposes other than those for which it was designed.
• Never leave high flames under the hood when it is in operation.
• Adjust the intensity of the flame so that it is directed onto the bottom of the cooking pan, making sure it does not wrap around the sides.
• Deep-fryers must be kept under constant supervision when in use: the oil may catch fire if it gets too hot.

3. CLEANING AND MAINTENANCE

- The activated charcoal filter cannot be washed or regenerated, and must be changed approximately every 4 months of operation, or more frequently in the case of particularly intensive use (W).

- The grease filters must be cleaned every 2 months of operation, or more frequently in the case of particularly intensive use. They can be washed in a dishwasher (Z).

• Clean the hood using a damp cloth and neutral liquid detergent.
• Avoid using alcohol or silicone-based products to clean the inside and outside of the cooker hood.

4. CONTROLS

Key	Function LED
T1	Turns the motor on/off at the first speed. Fixed
	Hood open:By pressing and holding the key for about 3 seconds, the motor is switched off and the hood upward movement is activated.	-
	Hood closed:When pressed once, the hood moves down; when pressed again, the hood stops. This condition should be considered as hood open even if it is not completely open; all functions are enabled. When the movement has ended, the motor starts at speed 2.	-
	K-Link uncouplingLong press when all loads are off (Motor+Light):starts the procedure for the cancellation of all compatible K-Link devices previously paired with the K-Link Coupling function.	Upon successful completion of the procedure LEDs T1 and T2 flash 5 times.
T2	Turns the motor on at the second speed. Fixed
	Long press:Activates/Deactivates the Activated Carbon Filters alarm.Note: perform the operation with the lights on only (motor off).	All LEDs flash twice:alarm activated.All LEDs flash once:alarm deactivated.
T3	Turns the motor on at the third speed. Fixed
	Long press:turns the motor on at the Intensive speed.This speed is timed for 6 minutes. At the end of this time, the system automatically returns to the previously selected speed. If activated with the motor off, once the time has passed it switches to OFF mode.	Flashing
	Long press when all loads are off (Motor+Light):performs a saturated Filters alarm reset.	All LEDs flash 3 times.
	Signals the saturated Metal Grease Filters alarm and the need to wash them.The alarm is activated after 100 hours of effective hood operation.	LEDs T2 and T3 lit with the hood off.
	Signals the saturated Activated Carbon Odour Filter alarm. The alarm is activated after 200 hours of effective hood operation.	LEDs T2 and T3 flashing with the hood off.
T4	AUTO ModeActivates/Deactivates the Automatic operating mode.AUTO mode is deactivated whenever any other keys are pressed.AUTO mode is activated when the key is pressed or the Coupled Induction Cooktop is turned on.The hood speed is automatically set using the highest power level present on the hob. When the Intensive speed is requested and the request lasts for more than 6 minutes, the hood returns to speed 3 for 30 seconds before restoring the Intensive speed.When the induction cooktop is turned off the last activated speed is held for 5 seconds, then speed 1 for 15 minutes. Once the 15 minutes have passed the motor turns off. The light status does not change.	Fixed light:AUTO mode activated.Off:AUTO mode temporarily deactivated.
	K-Link couplingBefore starting the procedure follow the specific instructions of the manuals of the devices to be coupled.Long press when all loads are off (Motor+Light):starts the pairing procedure between the hood and compatible K-Link devices (induction cooktop or remote control). Up to 3 induction cooktops can be paired and only one remote control. See the manual of the devices for details of the operations that need to be performed on these.The coupling procedure takes 2 minutes. If no devices are recognised within this time check that you have previously activated the procedure for the devices to be coupled. The maximum number of linkable devices may have been reached.	LEDs T1 and T2 flashing:coupling in progress.Upon successful completion of the procedure LEDs T1 and T2 will light up for 2 seconds.
T5	Short press: the lights alternate between high intensity, medium intensity (if present) and off.If there is an induction cooktop coupled with the hood and the hood is off, as soon as the induction cooktop is turned on, the hood lights automatically turn on at the maximum intensity.	-
	Long press (at least 3 seconds): the lights alternate between 5 shades of colour (if the dynamic white function is present).	-
Recommended device coupling sequence:1 - K-Link Mode (See remote control manual)2 - K-Link Coupling (See hood manual)3 - Remote Control-Hood Coupling (See remote control manual)4 - K-Link Coupling (See hood manual)5 - Cooktop-Hood Coupling (See induction cooktop manual)

5. LIGHTING

• Please contact the Service Department to change it ("Please contact the service department to purchase it").
• Lamps in risk group 1 under IEC/EN62471 at a distance of 20cm and in exempt from risk group under IEC/EN62471 at a distance of 30cm.

6. REMOTE CONTROL

• This appliance can be controlled using a remote control.
• ATTENTION: before proceeding, activate K-Link Mode on the remote control (see the device manual for further details).

	Hood open:By pressing and holding the key for about 3 seconds, the motor is switched off and the hood upward movement is activated.
	Hood closed:When pressed once, the hood moves down; when pressed again, the hood stops. This condition should be considered as hood open even if it is not completely open; all functions are enabled. When the movement has ended, the motor starts at speed 2.

1. SAFETY INFORMATION

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

This code is on the label placed inside the product.

Frekven-cijski op-sezi	Maksimalna emiti-rana snaga
2,4 GHz 10	0 mW maks.
5 GHz 100	mW maks.

2. USE

https://www.faberspa.com/en/product-documentation/

The product code can be found on the label inside the product.

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

https://www.faberspa.com/en/product-documentation/

Clean with a mild liquid detergent.

موقدة باضاعة ثابتة:AUTO طريقة الت “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ [( “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ [ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[],[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ [, “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ “[ (“,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “],” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,”[ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [“,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “},” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “],”,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “},”,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [“,”[ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “],”[ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,” [ “,”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”,”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(”),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(”]),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(””),”[“(”]+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”)+”[“(”+”]	T4 100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100.100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,+100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,+100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,+100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,+100,-100,-100,-100,-100,-100,-100,-100,100,100,100,100,100,100,100,100,100,100,+100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,+100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,+100,-100,-100,-100,-100,-100,-100,-100,-100,-100,-100,+100,-100,-100,100,100,100,100,100,100,100,100,100,100,+100,-100,-100,-100,-100,-100,-100,-100,-100,-100,+100,-100,-100,-100,-100,-100,-100,-100,+100,-100,-100,-100,-100,-100,+100,-100,-100,-100,-100,+100,-100,-100,-100,-100,+100,-100,-100,-100,-100,+100,-100,-100,-100,-100,+100,-100,-100,-100,-100,-100,+100,-100,-100,-100,-100,+100,-100,-100,-100,-100,+100,-100,-100,-100,+100,-100,-100,-100,+100,-100,-100,-100,+100,-100,-100,-100,+100,-100,-100,-100,+100,-100,-100,-100,+100,+100,-100,-100,-100,+100,-100,-100,-100,+100,+100,-100,-100,-100,+100,-100,-100,-100,+100,+100,-100,-100,-100,+100,-100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,+100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100]
الصغط لفترة قصيرة: تتنابع الإضاءة بين شدمة الإضاءة المرتفعة والموسطة (إذا Forecast) والمتوسطة) في حالة تواجد نظام للحث الكهرومناطيسي موصول بالشفات، exponentially المطانيي موصول بالشفاط،”—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،”—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،
الصغط لفترة قصيرة: تتنابع الإضاءة بين شدمة الإضاءة موصول بالشفاط،”—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،)—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،—ماني Educational الشفاط مطفأ،因為 المطانيي موصول بالشفاط،