CRP81USB - Alarm Clock BLAUPUNKT - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	Blaupunkt
Model	CRP81USB
Dimensions (W x H x D)	Approx. 200 x 100 x 130 mm
Weight	Approx. 0.5 kg
Power Supply	AC 100-240V, 50/60Hz; Battery backup (2 x AAA)
Display	LED digital clock with dimmer
Radio Bands	FM
Alarm Functions	Dual alarm with weekday/weekend setting, snooze, buzzer or radio wake-up
USB Playback	Yes, via USB-A port (plays MP3 files)
Audio Output	Built-in mono speaker, 3.5mm headphone jack
Additional Features	Sleep timer, FM antenna, adjustable alarm volume
Cleaning and Maintenance	Wipe with dry soft cloth; do not use liquids or abrasives
Safety	Use only supplied adapter; keep away from water; do not disassemble
Spare Parts and Repairability	Contact Blaupunkt service center; no user-serviceable parts inside
General Information	Designed for bedside use; includes user manual and guarantee card

Frequently Asked Questions - CRP81USB BLAUPUNKT

How do I set the time on the Blaupunkt CRP81USB?

Press and hold the Time Set button until the hour flashes, then use the + or - buttons to adjust. Press Time Set again to set minutes. Confirm with Time Set again.

Can I use the USB port to charge my phone?

No, the USB port is for playback of MP3 files only and does not provide charging capability.

How do I set the alarm?

Press the Alarm 1 or Alarm 2 button. Use the + and - buttons to set hour and minute, then press the same Alarm button to confirm. Choose wake-up mode (buzzer or radio) by pressing Mode.

Why is the display dim? How can I adjust brightness?

Press the Dim button repeatedly to cycle through brightness levels: high, medium, low, and off.

How do I set the snooze function?

When the alarm sounds, press the Snooze button. The alarm will silence and re-trigger after 9 minutes. You can adjust snooze duration in the menu.

Can I use the radio without setting an alarm?

Yes, press the Radio button to turn on the FM radio. Use Tuning or Preset buttons to select stations. Press Radio again to turn off.

How do I store my favorite radio stations?

Tune to the desired station, then press and hold a Preset button (1-5) until the display confirms. You can store up to 5 FM stations.

What type of battery does the backup use?

The clock uses two AAA alkaline batteries (not included) to keep time and alarm settings during a power outage.

Why is the alarm not sounding?

Check that the alarm is enabled (indicator on), volume is not set to minimum, and wake-up mode is not set to radio if no station is tuned. Also ensure backup batteries are not dead.

How do I reset the clock to factory settings?

Insert a paperclip into the Reset hole on the bottom of the unit. This will clear all settings and return the clock to default.

USER MANUAL CRP81USB BLAUPUNKT

Alarm clock radio with USB charging and outdoor temperature

Important Notes

• Safety and operating instructions should be retained for future reference.
• The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
• Do not install the product in the following areas:
• Places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiate too much heat.
• Blocking ventilation or in a dusty area.
• Areas where there is constant vibration. Humid or moist places.
• Do not place near candles or other naked flames.
• Operate the product only as instructed in this manual.
• Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and user instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power Sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Water and Moisture - To reduce the risk of fire or electric shock, do not expose the product to rain, dripping, splashing, or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool (or similar).
8. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
9. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
11. The highest environmental temperature suitable for this product is 35°C.
12. ESD hints - If the product maybe reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.
13. Battery

a. The batteries must not be exposed to excessive heat such as sunshine, fire or the like. b. The batteries should be drawn to the environmental aspects of battery disposal.

c. Battery usage CAUTION-to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

. Install all batteries correctly, + and - as marked on the apparatus.

. Do not mix batteries (old and new or carbon and alkaline, etc.)

. Remove batteries when the unit is not used for a long time.

ERP2 (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC regard to standby and off mode electric power consumption of electronic household and office equipment.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture, or dust.
6. Do not place this unit close to a strong magnetic field.
7. Do not place the unit on an amplifier or receiver.
8. Do not place this unit in a damp area as the moisture will affect the life of electric components.
9. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
10. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

Conformity

Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be obtained from the product page at www.blaupunkt.com.

Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland, Phone: [phone], E-mail: [e-mail]

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

Thank you for purchasing our model. Please read and reference this manual carefully before operating the unit. Please keep the manual for future operation reference.

Control locations

1-down/time/temperature button;	2-volume set button;
3-radio/sleep button;	4- snooze/dimmer/transmitter wireless signal search button;
5-set button;	6-alarm 1- 2 on/off button;
7-up/ projection button;	8-alarm 1 on icon;
9-sleep on icon;	10-low battery power on wireless transmitter icon;
11-alarm 2 on icon;	12-mood light;
13-projector;	14-outdoor temperature wireless transmitter;
15-projector knob;	16-low dimmer brightness gear;
17-USB charge port;	18-DC IN jack;
19-Backup battery compartment(CR2032, not included)

Install backup battery power: Place your clock radio face down on a flat and soft surface; use a coin to turn the battery cover anti-clockwise at the back of your unit; insert one new lithium cell "CR2032" battery (not included) into the battery compartment by observing the "+" polarity facing upward; replace the battery cover and turn clockwise to lock it. The time and all settings will be kept in case of AC power interruption, but the backup battery is available.

Remark: Do not use old or used batteries; do not use rechargeable batteries; a new battery is recommended for optimal usage of this clock.

Unit power on: insert the power connector into the DC jack of the unit, and plug in the AC/DC adaptor to an AC household outlet in order to get the power; The display will show "--°C" (at Lo-dim brightness) and start to search for the outdoor temperature signal.

Install outdoor wireless temperature transmitter: Slide open the backside battery cover, insert 2 pcs x AAA alkaline batteries (not included) into the battery compartment by observing the correct "+" or "-" polarity, replace the battery cover. The clock radio will receive data signal from the wireless transmitter in a few seconds. The temperature will be displayed. Then you can select a place to fix the transmitter device.

1-Channel selector 1/2/3;

2-battery compartment;

3-vertical mounting;

4-horizontal mounting

Remark:

1. Make sure the channel selector is set to position 1. The transmitter only works with the unit at channel 1.
2. Depending on the place you intend to mount, you can select vertical (desktop) or horizontal (wall-mount) mounting; but please put it in a dry and shaded area outdoors (away from direct sunshine or rain).
3. The maximum working distance is 60 meters between the wireless transmitter and clock radio without obstruction in between. Actual transmission range will vary depending on what is in the path of the signal. Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
4. In case of low battery power on the wireless transmitter, the low battery power icon LED will light on. Please replace it with a fresh one. And dispose of the power exhausted battery in an environmentally friendly way according to the law from your local government. 5. Under extremely low temperature, the voltage of the batteries in the wireless transmitter placed outdoors becomes low and may turn on the low battery power icon LED on display.

Clock time setting: Short press the set button, the hour digit will flicker on the display, press the up or down button to adjust the desired hour, press and hold the up or down button to accelerate setting at high speed; Short press the set button again to skip to the minute setting. Using the same method as the hour setting to operate the rest setting for minute/snooze time (5 min to 60 min)/temperature (°C or °F option). Short press the set button to finish the setting, and clock time will become stable on display.

Time projection (in radio off mode): short press the projection button to turn on the projection; press it again to activate auto scrolling of the current outdoor temperature (rounded to the nearest digit) and the current time for 5 seconds alternately; press the button again to turn off the projection; press and hold the projection button to flip the projection view upside down. Turn the projector knob on the backside to adjust the projection view slowly within 90 degrees.

Alarm setting: press and hold the alarm1-2 on/off button till the hour digits flare on display, and the alarm 1 icon LED will light on at the same time; press the up or down button to adjust the desired hour, press and hold up or down button to accelerate setting at high speed; short press the alarm1-2 on/off button again to skip to the minute setting, press the up or down button to adjust the desired minute; short press the alarm1-2 on/off button again to skip to the alarm source selection, press the up or down button to select alarm source between buzz or radio (if radio was selected as alarm source, press the up or down button to select the alarm volume in low or high level (LO = low, HI = high)); press the alarm1-2 on/off button to skip to alarm 2 setting which is the same operation as alarm 1.

Alarm on/off: you need to turn on the alarm after finishing the above alarm setting; press the alarm 1-2 on/off button repeatedly can turn on or off alarm 1 and alarm 2. Please make sure the relative alarm LED will light on after you selected which means the alarm is working now.

Alarming and snooze: when the unit is sounding due to the alarm time being reached, press the alarm 1-2 on/off button to cancel the voice, and it will wake up again at the same time of the next day; if you press the snooze button, the alarm will be silenced momentarily and come on again after the set snooze duration.

Note:

1. The unit will exit the clock or alarm setting mode when no key is pressed in approximately 10 seconds.
2. If your second alarm is activated while the first alarm is sounding or it is in the snooze mode, the second alarm overrides the first alarm (the first alarm is reset to come on the next day).
3. The alarm only works when the DC/AC power adaptor is connected. Please double check the alarm setting in case of power interruption.

Radio

Before listening to the radio, please extend the wire antenna and move the unit next to the window as much as you can in order to get better reception. Short press the radio button to turn on or off the radio mode; press the volume set button first, then continue to press the up or down button immediately for the output volume adjustment.

Tuning and auto scan: short press the up or down button to tune the radio frequency per 0.1MHz; press and hold the up or down button to scan and play the available station; press and hold the snooze button to scan and save the available station automatically (Max support 20 preset stations).

Manual memory station: When you tuned a favorite station, press and hold the set button till the "PXX" flare on display, press the up or down button to select the preset station number you desire to save, press the set button again to confirm. Then the radio station will be saved.

Pick up preset station: short press the set button first, press the up or down button to select the preset station number for listening.

Sleep: in radio listening mode, press and hold the sleep button first, and short press the sleep button immediately to select the sleep time (05, 10, 15, 30, 45, 60, 75, 90 or OFF); the unit will revert to clock interface after few seconds, press and hold the sleep button again can check the remaining sleep time. And the radio listening will auto off when the sleep time is being.

Outdoor temperature: in radio off mode, short press the down/time/temperature button to check the outdoor temperature on display, press it again return the clock time interface. Press and hold the down/time/temperature button (3 seconds), the display will show the clock time and temperature alternately; press and hold the button again will cancel it.

In case of temperature information is lost, and showed "-" on display, you can try press and hold the transmitter wireless signal search button, then take out and reinstall batteries to your outdoor transmitter for signal searching. If you continue to lose the outdoor temperature display, try placing the transmitter in a different location until you have smooth transmission of temperature data.

Display dimmer and mood light: short press the dimmer button to adjust the brightness in high or low level; rotate the brightness gear on the left side of the unit to customize the brightness in low level.

USB charging: Connect the charging cable of your mobile phone to the A-type USB port at the back of the unit, then connect the other end to your mobile phone. The clock radio will charge the mobile phone automatically.

Note:

1. Make sure to use the original cable of your mobile phone for charging. 2. Make sure the original adaptor (5V-1.2A) enclosed with your clock radio is being used to power your clock radio. Using other adaptors may not charge your phone. 3. iPad and Notepad charging is not applicable.

Troubleshooting

If your clock displays irrelevant time or does not function properly, which may be caused by electrostatic discharge or other interference, unplug the DC jack at the back of the unit, slide open the battery cover and take out the batteries. Then re-plug the DC jack and reinstall batteries by observing the correct +/- polarity. Your unit will be reset to default settings and you need to set it again.

Specifications

Alarm duration: Buzzer 5 minutes / Radio 1 hour

Snooze duration: 5 to 60 minutes

OUT Temperature range: -20°C ~ +50°C / -4°F ~ +122°F

Default settings:

Time: 24HR format

Alarm 1 and 2: 6:00am (OFF)

Snooze duration: 05 (5 minutes)

Important information

1- channel selector 1/2/3; 3- vertical mounting;

2- battery compartment; 4- horizontal mounting;

Caution:

1- channel selector 1/2/3;

1- channel selector 1/2/3;

3- vertical mounting;

2- battery compartment;

4- horizontal mounting;

Note:

1 – channel selector 1/2/3

2 – battery compartment

02-801 Warsaw, Poland

phone:[phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

Enjoy it.

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.