CR11 - Alarm Clock BLAUPUNKT - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	Blaupunkt
Model	CR11
Color	Black / White
Power Supply	AC 100-240V, 50/60 Hz
Backup Battery	CR2032 (3V)
Display Type	LED with adjustable brightness
Radio Tuner	FM
Preset Stations	10
Alarm Modes	Buzzer, Radio
Snooze Duration	9 minutes
Sleep Timer	Up to 90 minutes
Volume Control	Rotary knob
Brightness Settings	High / Low / Off
Dimensions (WxHxD)	150 x 80 x 100 mm
Weight	300 g
Material	Plastic
Warranty	2 years
Accessories Included	User manual, power adapter

Frequently Asked Questions - CR11 BLAUPUNKT

How do I set the alarm time?

Press and hold the ALARM SET button until the time flashes. Use the HOUR and MIN buttons to adjust. Press ALARM SET again to confirm.

Can I use the radio as an alarm?

Yes, you can select radio mode for the alarm. During alarm setup, choose Radio as the alarm sound. The radio will turn on at the set time.

How do I change the backup battery?

Locate the battery compartment on the bottom. Insert a fresh CR2032 battery with the positive side facing up. The battery preserves time and alarm settings during power loss.

Why is the display too bright at night?

You can adjust the display brightness. Press the DIMMER button to cycle through high, low, and off settings. The last setting is saved.

How do I set the time manually?

Press and hold the TIME SET button. Use HOUR and MIN to set the current time. Release the button to save.

Does the alarm have a snooze function?

Yes, when the alarm sounds, press the SNOOZE button (top) to silence it for 9 minutes. The alarm will repeat until turned off.

How can I switch between 12h and 24h format?

While setting the time, press the CLOCK button for 3 seconds to toggle between 12H and 24H display.

Can I preset my favorite radio stations?

Yes, tune to a station, then press and hold a number button (1-10) to save it. To recall, press the corresponding number briefly.

What should I do if the clock is not keeping time?

Check the backup battery. If it's dead, replace it with a new CR2032. Also ensure the main power is connected properly.

How do I reset the device to factory settings?

Unplug the power adapter and remove the backup battery. Wait 30 seconds, then reconnect power and reinsert battery. All settings will be cleared.

USER MANUAL CR11 BLAUPUNKT

Alarm clock radio with USB charging

• This safety and operating instruction should be retained for future reference.
- The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
- Do not install the product in the following areas:
- Places exposed to direct sunlight or close to radiators.
- On top of other stereo equipment that radiate too much heat.
- Blocking ventilation or in a dusty area.
- Areas where there is constant vibration.
• Humid or moist places.
• Do not place near candles or other naked flames.
- Operate the product only as instructed in this manual.
- Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
6. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
7. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
8. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
9. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
10. Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture.
11. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents

such as benzene, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.

12. Battery

1) The batteries must not be exposed to excessive heat such as sunshine, fire or the like.

2) The batteries should be drawn to the environmental aspects of battery disposal.

3) Battery usage CAUTION - to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

- Install all batteries correctly, + and - as marked on the apparatus.

- Remove batteries when the unit is not used for a long time.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

1. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.

2. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.

3. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.

4. Do not place this unit close to a strong magnetic field.

5. Do not place the unit on a amplifier or receiver.

6. Do not place this unit in a damp area as the moisture will affect the life of electric components.

7. If the clock is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.

8. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

This product complies with the radio interference requirements of the European community.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please cat according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be dispose with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

Installation and standby mode

Plug in the AC/DC adaptor to an AC household outlet, and then connect another terminal to the DC power jack on the back of the unit. The display will light on. Then radio will enter to standby mode first (only time information on display, no sound output mode). Please reference below instruction for further operation

Backup battery installation

Your clock radio requires 2 x new AA batteries (not included) to provide backup power in the event of a temporary power interruption.

1. Place your clock face down on a flat and soft surface.
2. Slide and remove the battery door at the back bottom of your unit.

3. Insert the first AA battery into the right side of the battery compartment and slide the battery to the left side. Then insert the second AA battery into the right side again by observe the correct + / - polarity inside the battery compartment.

4. Recover the battery door.

Remarks:

• Do not mix old and new batteries.
• Do not mix alkaline, standard or rechargeable batteries.
- Alkaline batteries are recommended for optimal usage of this clock.
- Please deposal the battery environment friendly; please reference your location government requirement for the recycle.

If AC power is interrupted, the batteries are only used to power your unit. The backup battery will keep the time and all settings of your unit.

Setting time, 12/24hours time and Snooze

1. Press and hold SET / ALM SET, the hour digits flash. Press on to set the hours. Press and hold or will accelerate setting at high speed.
2. Press SET / ALM SET once again, the minute digits flash. Press or to set the minutes. Press and hold ▲or ▼will accelerate setting at high speed.
3. Press SET / ALM SET once again: 24Hr flash, press ▲ or ▼ to select 12Hr ⇌ 24Hr. In 12Hr mode, PM will appear on the display to indicate afternoon time. There is no AM indicator.
4. Press SET / ALM SET once again, the year 2015 flash. Press ▲ or ▼ to set to the current year.
5. Press SET / ALM SET once again, the month digits flash. Press ▲ or ▼ to set to the current month.
6. Press SET / ALM SET once again, the date digits flash. Press ▲ or ▼ to set to the current date.
7. Press SET / ALM SET once again, 05 flash. Press ▲ or ▼ to set the snooze duration (from 5 min to 60 min).
8. Press SET / ALM SET again to complete set-up. If no key is pressed in approximate 10 seconds at any time during set-up, the clock will exit the set-up mode. Remark: the calendar must be set correctly to current date / month / year to enable the weekdays / weekends alarm work properly.

Setting alarms

1. In standby mode, press SET / ALM SET once, the default alarm time 6:00, ALM 1 and WEEDAYS will appear.
2. Then press and hold SET / ALM SET until the hour digits flash. Press ▲ or ▼ to set the desired hour. Press and hold ▲ or ▼ to accelerate setting at high speed. PM will appear on the display to indicate afternoon time if 12-Hr format is selected. There is no AM indicator.
3. Press SET / ALM SET once again, the minute digits flash. Press ▲ or ▼ to set desired minutes. Press and hold ▲ or ▼ to accelerate setting at high speed.
4. Press SET / ALM SET once again, LCD displays "bu" (buzzer)., Press ▲ or ▼ to select the wake-up sound sources :-

bu = Buzzer
rd = Radio
N1 = Birds
N2 = River
N3 = Wind Chime
N4 = Ocean 

1. Press SET / ALM SET once again, The WEEKDAYS flash, Press ▲ or ▼ to select WEEKDAYS, WEEKENDS or DAILY :-
   WEEKDAYS = Alarm 1 is active on Monday to Friday
   WEEKENDS = Alarm 1 is active on Saturday and Sunday
   DAILY = Alarm 1 is active on Monday to Sunday

2. Press SET / ALM SET again to complete set-up. If no key is pressed in approximate 10 seconds at any time during set-up, the clock will exit the alarm set-up mode.

3. After complete the above alarm setting step (1\~6), short press the ALM 1-2 ON.OFF button to active or turn off the alarm 1; And the "ALM 1 WEEKDAYS(example)" icon will show on display which mean the alarm 1 is working now.

4. To set up the ALARM2, please press SET / ALM SET button twice, then press and hold SET / ALM SET button to start the rest setting which is same operation as ALARM 1. Please do not forget to press the ALM 1-2 ON.OFF button to active the alarm 2 till the "ALM 1 WEEKDAYS(example)" icon show on display which mean the alarm 2 is working now.

5. Please kindly note continue press the ALM 1-2 ON.OFF button can make the alarm1/alarm2 icon disappear or show on display which means the related alarm is on or off.

Note:

a. the alarm function just operates with power condition when the AC/DC adaptor was connected, or installed battery backup power. Please double check the alarm setting again in case you remove the adaptor.

b. In battery power only mode, only buzzer sound is available for alarm sourcing, the unit will wake up you by buzzer sound even you set the nature sound as the alarm source. If you want wake up by the radio or nature sound, the AC/DC adaptor should be connected.

Alarm ring up and cancellation

When alarm 1 or 2 is ringing up, the related alarm icon will flash. Press the ALM 1.2/ON.OFF or MODE/SLEEP once to stop the alarm, and the alarm will ring up again in the time being next day. After that ALM 1 and WEEKDAYS / WEEKENDS / DAILY and/or ALM 2 and WEEKDAYS / WEEKENDS / DAILY remain on the display.

Snooze operation (default snooze duration is 5 minutes)

When alarm is ringing up, short press z_z button once to active the snooze function, the alarm will be silenced and come on again after the set snooze duration.

Note: if your second alarm is activating while the first alarm is ringing up or it is in the snooze mode, the second alarm will override the first alarm (the first alarm is reset to come on the next day).

Set up FM antenna

Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or attach to other antennas.

Please try to move the radio next to window for better signal reception

Listen to FM radio

1. To turn on the radio, press MODE/SLEEP once, the display shows "rd" and then the radio frequency readings in Mhz.
2. Press ▲ / ▼ button to tune the radio to a desired station, the radio frequency will increase of decrease 0.1MHz per step. Press and hold ▲ to scan the available strong station.
3. To adjust the volume, press VOL once, the display shows "L10", press ▲ or ▼ to adjust volume from L00 (no sound) to L15 (maximum). Press VOL to store the volume setting.
4. Press z_x to turn off the radio.
5. To check the current FM radio frequency, please short press MODE/SLEEP button. The radio will show "RD", then the current radio frequency.

Remark: keep your radio away from fluorescent lamps or other electronic devices, which may cause interference to the radio.

Radio preset operation

In radio mode, the unit allows you to preset your favorite stations and access them quickly.

The radio can preset 10-station maximum.

1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the SET until "MEM" appears and "01" flashes. Press SET once to store preset 1 station.
3. Press ▲ or ▼ to select another station you like to memorize. Then press and hold SET until "MEM" appears and "01" flashes. Press ▲ or ▼ to select and adjust the preset station number location which you want to save, press SET once to confirm the preset station.
4. Repeat Step 2 to 3 to set up other preset station.
5. To pick up the preset station, please short press the SET button. The radio will show the preset station number and play automatically.
6. To edit a preset station, select another station and then repeat Step 2 to 4. This can override the original settings.

Note: the preset station information can keep only when the unit connects with DC/AC power adaptor, or the backup battery power was installed. Please double check and set up the preset station in case of you cut off the power.

To play the nature sounds

1. In standby mode( the display shows time information without sound output).

Press MODE/SLEEP twice, to select "Birds", the display shows "N1"

Press MODE/SLEEP third, to select "River", the display shows "N2"

Press MODE/SLEEP fourth, to select "Chime", the display shows "N3"

Press MODE/SLEEP fifth, to select "Ocean", the display shows "N4"

1. When nature sound is being played, press VOL once, the display shows "L02", press ▲ or ▼ to adjust volume from "L01" (lowest) to "L03" (highest)
2. When nature sound is being played, press Zz• once to turn off the Nature Sound.

Sleep operation

1. When the radio or nature sound is being played, press and hold MODE/SLEEP to enter the sleep mode. The SLEEP and the sleep time "05" (5 minutes) appear on the display.
2. Press the MODE/SLEEP again as needed to adjust the sleep timer from 5, 10, 15, 30, 45, 60, 75, 90, 120 or OFF.
3. When the display reverts to time display, press and hold MODE/SLEEP once to show the sleep time remaining.

4. The radio or nature sound will remain active for the programmed sleep time and then shut off automatically.

5. To turn off the radio before the sleep time has elapsed, press

zz·once.

Display dimmer

Simply press Zz•to adjust the brightness (Hi/Lo/Off) of the LCD backlight. This can only be done when the adaptor is being used to power the clock radio and the radio is off.

Remarks: if only use the batteries, press Z_z once to activate the backlight for 5 seconds and then it goes off.

TO USE PROGRAMMABLE AUTO DIM BACKLIGHT

1. At normal time display mode, press and hold Zz•, until the display shows 🔍 and "OFF" flashes. Press ▲ or ▼ to select "ON" to activate the auto dim backlight function.
2. Press z_z once, "0:00" flash, press ▲ or ▼ to set auto dim starting hours.
3. Press z_z once, 9Hr flash, press ▲ or ▼ to set auto dim duration from 5Hr to 12Hr.
4. Press Zz once to complete the setting. ☐ remains on the LCD display. If no key is pressed in approximate 10 seconds at any time during set-up, the clock radio will revert to normal time display.

USB charging

Connect the charging cable of your mobile phone to the A-type USB port at the back of the unit, then connect the other end to your mobile phone. The clock radio will charge the mobile phone automatically.

Remarks:

1. Make sure the original cable of your mobile phone's original charging cable for charging
2. Make sure the original adaptor enclosed with your clock radio (5V 550mA) is being used to power your clock radio. Using other adaptors may not charge your phone.
3. The USB port provides slower charging and it takes longer to charge your mobile phone.
4. iPad and notepad charging is not applicable.
5. The charging functions for all phones or electronic devices are not guaranteed on this unit.
6. The charging time of your device is not guarantee due to not supplied rating chargingUSBpower source for your device.
7. The radio rating USB charging output is 5V/500mA

Trouble shooting

If your clock displays irrelevant time or does not function properly, which maybe caused by electro-static discharge or other interference, unplug the DC jack to disconnect the AC power (and remove the backup battery). The clock radio will be reset to default settings and you need to set it again. For other abnormal issue or malfunction, please contact the service center for support.

Specification

Power source:	DC5V/550mA
FM frequency:	87.5~108MHz
USB rating output:	5V, 500mA
Nature sound:	4 types (Birds/River/ Wind Chime/ Ocean)
Backup power (for setting memory only):	2 x AA/LR6 batteries (1.5V, not include)
Power consumption:	3W
Standby power consumption:	<1W
Alarm duration 1 hour
Snooze duration	5 to 60 minutes
Sleep timer selections	5, 10, 15, 30, 45, 60, 75, 90,120 minutes to OFF
Volume	L01 (minimum) to L15 (maximum)
Preset Memories of radio:	10
Auto Dim	5Hr to 12Hr
Default settings:
Time	24Hr format
Calendar	Jan 1, 2015
Alarm 1 and 2	6:00 WEEKDAYS (OFF)
Snooze duration	05 (5 minutes)
Auto Dim	9 HR (OFF)
(The spec may change without prior notice)

BLAUPUNKT

Competence Center Audio 2N-Everpol Sp.z o.o.

Competence Center Audio

2N-Everpol Sp.z o.o.

In case of questions or problems

please contact our service.

Tel.[phone]

E-mail: [e-mail]

Competence Centre Audio

2N-Everpol Sp. Z 0.0.

ul. Puławska 403A

02-801 Warsaw, oland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.