IAN 102881 - Razor SILVERCREST - Free user manual and instructions

Brand	SilverCrest
Model	IAN 102881
Product Type	Shaver
Shaving System	Foil
Power Supply	Rechargeable battery
Battery Type	NiMH
Charging Time	8 hours
Usage Time	45 minutes
Dimensions (approx.)	15 x 5 x 4 cm
Weight (approx.)	200 g
Water Resistance	Washable under running water
Cleaning	Rinse with water, do not immerse
Blade Replacement	Replaceable foil and cutter block
Safety Features	Overcharge protection, auto power-off
Included Accessories	Protective cap, cleaning brush
Repairability	Replacement parts available

Frequently Asked Questions - IAN 102881 SILVERCREST

How long does it take to fully charge the shaver?

The charging time is approximately 8 hours for a full charge.

How long can I use the shaver on a full charge?

On a full charge, you can use the shaver for about 45 minutes of cordless shaving.

Is the shaver waterproof?

The shaver is washable under running water, but it is not fully waterproof. Do not immerse it in water.

How do I clean the shaver?

Remove the foil and cutter block, rinse them under running water, and let them dry. Use the cleaning brush for the housing.

Can I use the shaver while charging?

No, the shaver should not be used while connected to the charger. Only use it cordlessly.

How often should I replace the blades?

For optimal performance, replace the foil and cutter block every 12 to 18 months or when you notice reduced cutting efficiency.

What type of battery does it use?

The shaver uses a NiMH rechargeable battery.

Is the shaver suitable for wet shaving?

Yes, you can use it with shaving foam or gel, but rinse thoroughly after use.

What does the protective cap do?

The protective cap covers the shaving head to prevent damage when not in use.

Where can I find replacement parts?

Replacement foils and cutter blocks are available online or at Lidl stores. Use the model number IAN 102881 to find compatible parts.

USER MANUAL IAN 102881 SILVERCREST

AFEITADORA ROTATORIA RASOIO A LAMINA ROTANTE SRR 3.7 A1

ES

AFEITADORA ROTATORIA

Operating instructions

IAN 102881

ES

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

DE AT CH

GB / MT Operating instructions Page 61

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Indice

Introduzione 22

Uso conforme ....22

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Índice

Introdução ....42

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Contents

Introduction 62

Intended use 62

Package contents 62

Description of the appliance ....63

Technical data....64

Safety guidelines 65

Charging the batteries ....69

Cordless shaving....70

Shaving using the mains adapter .....71

Trimmer/long hair trimmer .....71

Travel lock....72

Cleaning and care 73

Cleaning with the brush....73

Cleaning under running water....74

Thorough cleaning 75

Storage ....76

Warranty and service 77

Disposal....78

Importer....79

Introduction

Congratulations on the purchase of your new appliance.

You have selected a high-quality product. The operating instructions are part of this product. They contain important information on safety, usage and disposal. Before using the product, familiarise yourself with all handling and safety guidelines. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner(s).

Intended use

This appliance is intended exclusively for shaving and trimming human hair.

This appliance is intended solely for use in private households.

Do not use it for commercial applications.

All other uses are deemed to be improper and may result in property damage or even in personal injury.

Package contents

◆ Shaver with shaver unit
Power adapter
♦ Trimmer unit
◆ Protective cap
Brush
Case
Order card
◆ Operating instructions

NOTE

Check contents for completeness and damage immediately after unpacking. Contact Customer Services if necessary.

Description of the appliance

Figure A (front fold-out page):

1 Drive shaft
② Shaver unit
3 Release button
4 Protective collar
5 On/offbutton
6 Narrow long-hair trimmer
7 Trimmer unit
8 Broad long-hair trimmer
9 symbol (lock)
10 symbol (charge)
⑪ Battery charge level indicator
12 Charging socket

Figure B (rear fold-out page):

13 Connection plug

14 Mains adapter

15 Brush

16 Protective cap

17 Case

Technical data

Appliance

Input voltage: 5 V

Input current: 1000 mA

Battery: 3.7 V / 700 mAh Li-ion battery

Environmental temperature: 5°C up to 35°C

Protection class: III/

Charging time: approx. 90 minutes

Operating time with fully

charged battery: approx. 60 minutes

Protection rating: IPX 4

Power adapter (type PTB-050100EU)

Input voltage: 100 - 240 V \~

50/60 Hz

Output voltage: 5 V

Output power: 1000 mA

Protection class: II /

Safety guidelines

DANGER – RISK OF ELECTRIC SHOCK!

▶ Prior to use, check the appliance for visible external damage. Never operate an appliance that is damaged. There is a risk of electrocution.
The appliance may no longer be used if there is any damage to the cable, to the mains power adapter, the housing or any other components.
▶ Remove the mains adapter from the power socket
- if a defect occurs,
– before cleaning the appliance,
- if you do not intend using the appliance for long periods,
- after every use.

Pull the mains power adapter itself and not the cable.

▶ Never submerge the appliance or the cable with mains adapter in water or other liquids.

DANGER – RISK OF ELECTRIC SHOCK!

▶ If the appliance falls into water, it is imperative that you pull the mains adapter out of the power socket before you reach into the water.
▶ Never touch the mains adapter with wet hands, especially when plugging it in or unplugging it. Risk of electrocution!
▶ Check mains adapter and appliance regularly for possible mechanical damage.
▶ Ensure that the cable does not get jammed in cupboard doors or pulled over hot surfaces. If this occurs, the cable insulation may be damaged.
The installation of a residual current circuit breaker with a rated tripping current of no more than 30 mA offers further protection from electric shocks. Have the installation carried out only by a qualified electrician.

DANGER – RISK OF ELECTRIC SHOCK!

▶ WARNING! Keep the appliance dry.
▶ WARNING! Disconnect the mains adapter from the handset when you clean it with water.

WARNING - RISK OF INJURY!

This appliance may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks.

▶ Children must not use the appliance as a play-thing.
- Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.

WARNING - RISK OF INJURY!

- All repairs must be carried out by authorised specialist companies or by the Customer Service department. Improper repairs can pose significant risks to the user. They will also invalidate any warranty claim.

▶ Do not use the appliance with a defective cutter attachment or cutting length attachment, since these may have sharp edges. There is a risk of personal injury!

▶ Defective components must always be replaced with original replacement parts. Compliance with safety requirements can only be guaranteed if original replacement parts are used.

▶ Only plug the mains adapter into an easily reachable power socket so that you can pull the mains adapter out of the power socket quickly in an emergency.

CAUTION - PROPERTY DAMAGE!

▶ Never operate the appliance unsupervised, and only in accordance with the information on the nameplate.

▶ Use only the supplied mains adapter (type PTB-050100EU) to power your appliance.

▶ To avoid damage caused by overheating, do not cover the mains power adapter.

Charging the batteries

The battery should be charged for at least 90 minutes before first use.

NOTE

▶ Ensure that the appliance is switched off before charging the battery.

1) Plug the connection plug ⑬ into the charging socket ⑫ on the shaver.

Ensure the +/- terminals are correctly aligned: the guide rod in the charging socket ⑫ must be in the guide groove on the connection plug ⑬. Otherwise the connection plug ⑬ cannot be plugged in.

2) Plug the mains adapter 14 into a mains socket that complies with the appliance specifications.

The battery charge level is shown in percent (%) on the display (battery charge level indicator 11). The ⚡ symbol 10 appears on the display.

As soon as the battery is fully charged, the symbol 10 appears permanently on the display and the battery charge level indicator 11 shows 99%.

Once the battery is fully charged, you can use the appliance for around 60 minutes without connecting it to the power supply.

Cordless shaving

GB MT

CAUTION! MATERIAL DAMAGE!

This appliance is not suitable for wet shaving!

You can use the shaver without the cable. In this case, you must charge the appliance before first use (see section "Charging the batteries").

1) If it is not already attached, push the protective collar ④ from below onto the shaver unit ② (see fold-out page).
2) Attach the shaver unit ② with the fitted protective collar ④ onto the drive shaft ①. Ensure that the protective collar ④ is sitting correctly on the handset.
3) Remove the protective cap 16.
4) Press the on/off button ⑤. The battery charge level indicator ⑪ shows the current charge level and the shaver starts.

NOTE

The best results are achieved if used on dry skin.

It can take 2 to 3 weeks until the skin is accustomed to the dry shaving system.

5) Move the shaving heads with straight and circular motions over the skin.
6) When you have covered all the areas that you want to shave, press the on/off button ⑤. The appliance stops. After approx. 3 seconds, the display will switch off.

7) Clean the shaver after every use with the supplied brush 15. For a more thorough cleaning, read the section "Cleaning and care".

Shaving using the mains adapter

CAUTION! MATERIAL DAMAGE!

This appliance is not suitable for wet shaving!

If you want to use the shaver to load without charging it, you can also use it directly with the mains adapter 14:

1) Plug the connection plug ⑬ into the charging socket ⑫ on the shaver. Ensure the +/- terminals are correctly aligned. The guide rod in the charging socket ⑫ must be in the guide groove on the connection plug ⑬. Otherwise the connection plug ⑬ cannot be plugged in.

2) Insert the plug into a mains power socket.

Now you can use the shaver.

Trimmer/long hair trimmer

To shape your beard, form sideburns or shave eyebrows, use the trimmer unit ⑦.

1) Pull the shaver unit ② off the handset (if attached).
2) Attach the trimmer unit ⑦ to the drive shaft ①. Depending on whether you want to use the broad ⑧ or narrow long hair trimmer ⑥, change the direction of attachment.

- If you want to use the broad long hair trimmer ⑧, attach the trimmer unit ⑦ so that the broad long hair trimmer ⑧ is facing towards you. - If you want to use the narrow long hair trimmer ⑥, attach the trimmer unit ⑦ so that the narrow long hair trimmer ⑥ is facing towards you.

3) Press the on/off button ⑤. The battery charge level indicator ⑪ shows the current charge level and the appliance starts.
4) When you are finished trimming, press the on/off switch ⑤ again.
5) Clean the trimmer unit ⑦ with the supplied brush ⑮. For a more thorough cleaning, read the section "Cleaning and care".

Travel lock

To ensure that the appliance cannot switch on accidentally, you can lock the on/off button ⑤.

■ Press and hold the on/off button ⑤ until the 🔒 symbol ⑨ appears on the display.

If you now press the on/off button ⑤, the 🔔 symbol ⑨ and the battery charge level indicator ⑪ appear. The appliance will, however, not switch on.

If you want to release the lock, press and hold the on/off button ⑤: -the 🔔 symbol ⑨ appears and starts to fl ash.

The appliance can now be switched on.

Cleaning and care

DANGER - ELECTRIC SHOCK!

Before cleaning the appliance, disconnect the power plug from the mains power socket! There is a risk of electric shock!

CAUTION! MATERIAL DAMAGE!

Do not use abrasive, chemical or caustic cleaning agents to clean this appliance. This will irreparably damage the appliance.

Cleaning with the brush

Shaver unit

Clean the 3 shaving heads in the shaver unit ② after every shave using the brush ⑮.

1) Press the release button ③ so that the shaver unit ② pops open.
2) Tap the shaver unit ② on a fl at surface or blow off the hair cuttings.
3) Use the brush 15 to remove any remaining hair cuttings.

Trimmer unit

• Clean the trimmer unit after every use with the supplied brush 15.
  Oil the long hair trimmers ⑥/⑧ around every 6 months with a drop of sewing machine oil.

Cleaning under running water

The shaver unit ② is suitable for cleaning under running water.

1) Press the release button ③ so that the shaver unit ② pops open.
2) Hold the shaver unit ② under the running water so that the water flows through the shaving heads from the inside to the outside.

CAUTION! MATERIAL DAMAGE!

Ensure that only the shaver unit ② is under the stream of water! The shaver handset is only protected against water splashes and can be irreparably damaged if it is held under running water.

3) Allow the shaver unit ② to dry before you use the shaver again.

Thorough cleaning

For a more thorough cleaning, remove the shaving heads:

1) Press the release button ③. The shaver unit ② pops up.
2) Overstretch the shaver unit ② a little so it can be pulled upwards and off.
3) Carefully turn the catch marked with arrows in the direction of the arrows until the mounting of the shaving heads can be lifted of (see figure).

4) Clean all parts under running water and then allow them to dry fully.

5) Replace the shaver unit ②.
6) To attach it, turn the catch marked with arrows in the opposite direction to the arrow markings so that the shaving head mounting can no longer be removed.
7) Remove loose hairs from the shaver with the brush 15.
8) Replace the shaver unit ② on the shaver. Ensure that it snaps into place and is seated firmly.

- Clean the housing and the mains adapter 14 with a damp cloth.

NOTE

If ...

-... the shaving result is noticeably poorer, ...
-... you have to the shave the same spot repeatedly to achieve a good result, ...
-... the shave takes much longer than usual, ...
-... there is visible damage to the shaving heads, ...

... the shaving heads should be changed.

Please contact the Service Centre if you want to order shaving heads.

Storage

CAUTION! MATERIAL DAMAGE!

Never store the shaver in the case ⑰ while the appliance is charging. Risk of overheating!

■ Always replace the protective cap ⑯ on the shaver unit ② when you are not using the appliance.

■ Store the cleaned and dried appliance and its accessories in the supplied case ⑰.
■ Store everything in a clean, dust-free and dry place.

Warranty and service

You are provided a 3-year warranty on this appliance, valid from the date of purchase. This appliance has been manufactured with care and inspected meticulously prior to delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please contact your Customer Service unit by telephone. This is the only way to guarantee free return of your goods.

The warranty only covers claims for material and manufacturing defects, not for damage sustained during carriage, components subject to wear and tear or damage to fragile components such as switches or batteries. This appliance is intended solely for private use and not for commercial purposes.

The warranty shall be deemed void in cases of misuse or improper handling, use of force and modification which have not been carried out by one of our authorised Service centres.

Your statutory rights are not restricted by this warranty.

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking, but no later than two days after the date of purchase. Repairs carried out after expiry of the warranty period shall be subject to charge.

Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

IAN 102881

Service Malta

Tel.: [phone]

E-Mail: [e-mail]

IAN 102881

Hotline availability: Monday to Friday 08:00 - 20:00 (CET)

Disposal

pose of the appliance in the normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EU.

Dispose of the appliance via an approved waste disposal company or your municipal waste disposal facility. Please observe applicable regulations. Please contact your waste disposal facility if you are in any doubt.

Disposal of (rechargeable) batteries

To dispose of the appliance in an environmentally friendly way, you must remove the battery from the appliance:

CAUTION - PROPERTY DAMAGE!

Remove the battery from the appliance only if you want to scrap/dispose of the appliance! The appliance is permanently defective after you have removed the battery!

1) To remove the battery from the handset, remove the small screw from the rear of the handset with a Phillips screwdriver.
2) Remove the rear cover of the handset.
3) Lever out the black inner housing, for instance with a screwdriver. Before you remove the inner housing, you may need to break off the side and bottom brackets or bend them outwards. Preferably, use a fl at-blade screwdriver to do this.
4) Once you have removed the inner housing: Break the brackets on the transparent plastic cover on the sides. Press the lower lock slightly inwards so that the clear plastic cover can be folded upwards.

5) Lift the board slightly so you can get under the battery with a fl at-blade screwdriver.
6) Lever the batteries out.
7) Dispose of the battery in an environmentally friendly manner.

Used batteries may not be disposed of in household waste.

Consumers are legally obliged to dispose of (rechargeable) batteries at a collection point in their community/city district or at a retail store. The purpose of this obligation is to ensure that batteries are disposed of in an environmentally congruent manner. Only dispose of batteries when they are fully discharged.

The packaging is made of environmentally friendly materials which you can dispose of at your local recycling centre.

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Inhaltsverzeichnis

Einleitung ....82

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DEUTSCHLAND / GERMANY

www.kompernass.com