Ultrathin Keyboard Cover i5 - Keyboard LOGITECH - Free user manual and instructions

Product type	Keyboard cover for iPad
Brand	Logitech
Model	Ultrathin Keyboard Cover i5
Dimensions (approx.)	250 x 180 x 6 mm
Weight	300 g
Power supply	Built-in rechargeable battery, charges via micro USB
Battery life	Approximately 3 months per charge (normal use)
Connectivity	Bluetooth 3.0
Keys	Backlit, full island keyboard
Main functions	Screen protection, typing support, automatic sleep/wake
Compatibility	iPad 5th generation (iPad Air 1, iPad mini 2 and 3 also compatible)
Care and cleaning	Clean with a soft, dry cloth. Avoid liquids
Safety	Do not expose to moisture or extreme temperatures
Spare parts and repairability	No user-replaceable parts
General information	Designed for use with iPad. Comes with USB charging cable

Frequently Asked Questions - Ultrathin Keyboard Cover i5 LOGITECH

How do I pair the keyboard with my iPad?

Make sure the keyboard is charged. Turn it on (switch to ON). On your iPad, go to Settings > Bluetooth and enable Bluetooth. Select "Logitech Keyboard Cover" from the list. If prompted, enter the code displayed on the keyboard.

What should I do if the keyboard does not connect?

Check that the keyboard is on and the iPad's Bluetooth is enabled. Try to reset the connection by turning the keyboard off and on, then forgetting the device in the iPad's Bluetooth settings and re-pairing it.

How do I charge the keyboard?

Use the provided micro USB cable. Connect it to the keyboard's micro USB port and to a USB power adapter (5V, 500mA minimum) or a computer USB port. The red light turns on during charging and turns off once fully charged.

What is the battery life?

The battery lasts about 3 months with normal usage of 2 hours per day. It takes approximately 2 hours to fully charge.

Does the keyboard work with other tablets?

This keyboard is specifically designed for the iPad 5th generation (models A1822/A1823). It may also work with iPad Air 1st generation and iPad mini 2/3, but the fit may not be perfect.

How do I clean the keyboard?

Use a soft, dry cloth to gently wipe the surface. Do not use liquid cleaning products, aerosols, or abrasive pads. For stubborn stains, lightly dampen the cloth with water and wipe immediately.

What should I do if a key stops working?

Check that no debris is stuck under the key. Gently brush with a soft-bristled brush. If the problem persists, try to reset the keyboard by turning it off and on. If it still doesn't work, contact Logitech support.

Is the backlight adjustable?

Yes, the backlight adjusts automatically based on ambient light. You can also turn it off by holding the Fn key and pressing the brightness key (F5/F6).

Can I use the keyboard with a protective case on my iPad?

The keyboard is designed to be used directly on the iPad. Using a thick case may prevent proper fit and affect the magnetic connection and stability.

How do I know if the keyboard is charging?

A red light near the micro USB port turns on during charging. When the battery is fully charged, the light turns off. If the light blinks red, the battery is low.

USER MANUAL Ultrathin Keyboard Cover i5 LOGITECH

Ultrathin Keyboard Cover i5

Setup Guide

Contents

English 3

Deutsch 11

Français 19

Italiano 27

Español 35

Português 43

Nederlands 51

Svenska 59

Dansk 67

Norsk 75

Suomi 83

Ελληνικά 91

Russian 99

Hungarian 107

Czech version 115

In Polish 123

Estonian 131

Latvian 139

Lithuanian 147

Croatian 155

Serbian 163

Slovenian 171

Slovak 179

Romanian 187

Bulgarian 195

Ukrainian 203

Turkish 211

www.logitech.com/support

Know your product

1. Protective cover
2. iPad holder
3. Keyboard
4. Function keys
5. Bluetooth® and battery status light
6. Bluetooth connect button
7. On/Off switch
8. Micro-USB charging port
9. Documentation
10. Micro-USB charging cable

Set up your product

1. Turn on the Keyboard Cover:
2. Bluetooth discovery starts automatically and continues for 15 minutes. The Status light blinks blue.
3. If the Status light briefly turns red, charge the batteries. For more information, see “Charge the batteries.”
4. Make sure your iPad's Bluetooth feature is on. Select Settings > Bluetooth > On.
5. Select "Ultrathin Keyboard Cover i5" on the iPad's Devices menu. Bluetooth connection completed.
6. Place the iPad on the Keyboard Cover.

Charge the keyboard battery

1. Plug one end of the micro-USB cable into the charging port, and the other end into a USB port on your computer.

Alternatively, you can use a 5V USB charger, such as the one provided with your iPad, as long as its power output rating is at least 500mA.

The status light blinks green while the battery is charging.

1. Charge the battery until the Status light turns solid green.

Battery information:

- A fully charged battery provides about 3 months of power when the Keyboard Cover is used about two hours a day.

- Charge the battery when the Status light briefly turns red after the Keyboard Cover turns on.

- When not in use, turn off the Keyboard Cover to conserve battery power.

- The Keyboard Cover enters sleep mode if powered on and not used. To exit sleep mode, press any key.

Function keys

Home = iPad Home screen

Fn + 1 = Lock screen

Locks or unlocks the iPad screen

Fn + 2 = Siri

Use your voice to send messages, make calls, schedule meetings, and more

Fn + 3 = Search

Launches the iPad search function

Fn + 4 = Switch applications

Fn + 5 = Virtual keyboard

Shows/hides the virtual keyboard

Fn + 7 = Previous track

Fn + 8 = Play/Pause

Fn + 9 = Next track

Fn + 0 = Mute

Fn + dash = Volume down

Fn + plus = Volume up

Fn + X = Cut

Fn + C = Copy

Fn + V = Paste

Fn + Left cursor = Select left

Selects text on the left, word by word

Fn + Right cursor = Select right

Selects text on the right, word by word

Switch language

Use your product

Status light indications

Light Description
Blinking green The battery is charging.
Solid green The battery is fully charged (100%).
Red Battery power is low (less than 10%). Recharge the battery.
Blinking blue Fast: The keyboard cover is in discovery mode, ready for pairing.Slow: The keyboard cover is trying to reconnect to your iPad mini.
Solid blue Bluetooth pairing or reconnection is successful.

Storing the iPad for travel

1. Lift the iPad from the Keyboard Cover.
2. Rotate the iPad, with the screen side down, so the Home button is on the right.
3. Place the iPad on to the Keyboard Cover. A magnetic clip holds the iPad in position.

Connecting to a different iPad

1. Make sure the Keyboard Cover is turned on.
2. Check that your iPad's Bluetooth feature is on. Select Settings > Bluetooth > On.
3. Press the Bluetooth Connect Button. The Keyboard Cover is discoverable for 3 min.
4. Select "Ultrathin Keyboard Cover i5" on the iPad's Devices menu. Bluetooth connection completed.
5. Place the new iPad on the Keyboard Cover.

Troubleshooting

The Keyboard Cover does not work

• Press any key to wake the Keyboard Cover from sleep mode.
• Turn the Keyboard Cover Off and then back On.
• Recharge the internal batteries. For more information, refer to "Charge the batteries." • Re-establish the Bluetooth connection between the Keyboard Cover and iPad:
• Verify that iPad's Bluetooth feature is turned on.
• Choose "Ultrathin Keyboard Cover i5" from the Devices menu on your iPad. The Status light briefly turns blue after the Bluetooth connection is made.

Battery disposal at product end of life

1. Pry off top cover of keyboard with screwdriver.
2. Detach battery from circuit board and remove battery.
3. Dispose of your product and its battery according to local laws.

What do you think?

Please take a minute to tell us. Thank you for purchasing our product.

www.logitech.com/ithink

Visit Product Central

There's more information and support online for your product. Take a moment to visit Product Central to learn more about your new Keyboard Cover.

Browse online articles for setup help, usage tips, or information about additional features.

Connect with other users in our Community Forums to get advice, ask questions, and share solutions.

At Product Central, you'll find a wide selection of content:

• Tutorials
• Troubleshooting • Support community
• Software downloads • Online documentation • Warranty information
• Spare parts (when available)

Go to www.logitech.com/support/ultrathin-keyboard-cover-i5

www.logitech.com/ithink

Product Central

Fn + 8 = Play/Pause

Fn + plus = Volume +

Fn + X = Cut

Fn + C = Copy

Fn + V = Paste

www.logitech.com/ithink

Product Pages

www.logitech.com/ithink

www.logitech.com/ithink

1. Connect the Keyboard Cover:

www.logitech.com/ithink

www.logitech.com/ithink

Fn + 4 = Program button

www.logitech.com/ithink

1. Insert the micro-USB cable into the charging port, and the other end into the USB port on your computer. You can also use a 5V USB charger, such as the one that came with the iPad, as long as the output is at least 500 mA. The status light blinks green while the battery is charging.
2. Charge the battery fully until the status light glows steady green.

Battery information:

1. Connect one end of the micro USB cable to the charging port and the other end to a USB port on your computer.

1. Remove the iPad from the Keyboard Cover.
2. Turn the iPad over, with the screen facing down, so that the Home button is on the right side.
3. Place the iPad on the Keyboard Cover: The iPad is attached in this position by a magnetic connector.

Connecting to another iPad device

1. Make sure the Keyboard Cover is turned on.
2. Make sure Bluetooth is turned on on your iPad. Go to Settings > Bluetooth > On.
3. Press the Bluetooth pairing button. The Keyboard Cover is discoverable for 3 minutes.
4. On the Devices menu on your iPad, select "Ultrathin Keyboard Cover i5". The Bluetooth connection is established.
5. Place your new iPad on the Keyboard Cover.

www.logitech.com/ithink

Visit the Product Center

1. Connect one end of the micro-USB cable to the charging port and the other end to a USB port on your computer.

Alternatively, you can use a 5V USB charger, such as the one that came with your iPad, provided the power output is at least 500 mA.

The status light blinks green while the battery is charging.

1. Charge the battery until the green status light stops blinking.

1. Remove the iPad from the Keyboard Cover.
2. Turn the iPad so that the screen is facing down and the home button is on the right side.
3. Place the iPad on the Keyboard Cover. The iPad is secured with the magnetic latch.

1. Make sure the Keyboard Cover is turned on.
2. Check that Bluetooth is turned on on the iPad. Go to Settings > Bluetooth > On.
3. Press the Bluetooth pairing button. The Keyboard Cover is visible for 3 minutes.
4. In the Devices menu on the iPad, select "Ultrathin Keyboard Cover i5". Bluetooth pairing is complete.
5. Place the new iPad on the Keyboard Cover.

Troubleshooting

Keyboard Cover does not work

• Press any key to wake the Keyboard Cover from sleep mode.
• Turn the Keyboard Cover off and then on again.
• Charge the internal batteries. For more information, see "Charging the batteries".
• Re-establish the Bluetooth connection between the Keyboard Cover and the iPad: • Check that Bluetooth is turned on on the iPad.
• In the Devices menu on the iPad, select "Ultrathin Keyboard Cover i5". The status light will briefly turn blue when the Bluetooth connection is established.

Battery disposal at the end of product life

1. Detach the top cover of the keyboard using a screwdriver.
2. Disconnect the battery from the power supply and remove it.
3. Dispose of the product and battery in accordance with local laws.

What are your impressions?

www.logitech.com/ithink

Visit the product center

There you will find additional information and online support for your product.

Take the time to visit the product center and learn more about your new Keyboard Cover.

1. Lift the iPad off the Keyboard Cover.
2. Turn the iPad over, making sure the screen is facing down, so that the Home button is on the right side.
3. Place the iPad on the Keyboard Cover. The magnetic clasp holds the iPad in place.

Connecting to another iPad device

1. Make sure the Keyboard Cover is turned on.
2. Check that the Bluetooth function on the iPad is turned on. Select Settings > Bluetooth > On.
3. Press the button to establish the Bluetooth connection. The Keyboard Cover can be discovered for 3 minutes.
4. In the device menu on your iPad, select "Ultrathin Keyboard Cover i5". The Bluetooth connection is complete.
5. Place the new iPad on the Keyboard Cover.

Troubleshooting

Keyboard Cover is not working

• Press any key to wake the Keyboard Cover from sleep mode.
• Turn the Keyboard Cover off and then on again.
• Recharge the internal batteries. For more information, see the "Charging the batteries" section.
• Re-establish the Bluetooth connection between the Keyboard Cover and your iPad.
• Check that Bluetooth is enabled on your iPad. • In the device menu on your iPad, select "Ultrathin Keyboard Cover i5". After the Bluetooth connection is established, the status light flashes blue briefly.

www.logitech.com/ithink

1. Make sure the Keyboard Cover is turned on.
2. Check that Bluetooth is enabled on your iPad. Select Settings > Bluetooth > On.
3. Press the button to connect via Bluetooth. The Keyboard Cover device will be discoverable for 3 minutes.
4. In the Devices menu on your iPad, select "Ultrathin Keyboard Cover i5". Bluetooth connection complete.
5. Place the new iPad on the Keyboard Cover.

Troubleshooting

Keyboard Cover is not working

www.logitech.com/ithink

www.logitech.com/ithink

Keyboard Cover is not working

www.logitech.com/ithink

www.logitech.com/ithink

www.logitech.com/ithink

Battery information:

Charging 1 hour

4 .. Keyboard Cover iPad 15

Support to

© 2013 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Apple and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.