VL 5617 M - Fan AEG - Free user manual and instructions

Product type	Pedestal fan
Brand	AEG
Model	VL 5617 M
Dimensions (H x W x D)	135 cm x 45 cm x 45 cm
Weight	4,5 kg
Power supply	220-240 V ~ 50 Hz
Power	50 W
Number of speeds	3 speeds
Oscillation	Yes, 90°
Programmable timer	Yes, up to 2 hours
Remote control	Yes, included
Adjustable height	Yes, telescopic
Main material	ABS plastic and steel
Energy class	A
Maximum noise level	62 dB(A)
Blade diameter	40 cm
Overheat protection	Yes
Protection grille	Removable metal grille
Care and cleaning	Clean with a damp cloth, disconnect before.
Spare parts available	Blades, grille, remote control, base
Repairability	Repairability score 8/10

Frequently Asked Questions - VL 5617 M AEG

How to assemble the AEG VL 5617 M fan?

Screw the base onto the stand, insert the telescopic tube, attach the motor, then the blades and grille. Tighten all screws. Refer to the provided diagram.

How to change the fan speed?

Use the speed button on the control panel or the remote control. The speeds are 1 (low), 2 (medium), and 3 (high).

How to clean the fan?

Unplug the appliance. Remove the front grille and blades. Clean with a damp cloth and mild soap. Dry before reassembling.

The remote control does not work, what to do?

Check the batteries (type CR2032). Replace them if necessary. Aim directly at the receiver on the fan. Remove obstacles.

Oscillation stops during use, what to do?

Make sure the oscillation function is enabled. If the problem persists, turn the appliance off and on. If the noise is abnormal, contact customer service.

How to set the timer?

Press the Timer button on the remote control or panel. Turn the dial to select from 1 to 120 minutes. The appliance will turn off automatically.

The fan makes an abnormal noise, what to do?

Stop the appliance. Check that the blades are not deformed and that the grille is properly attached. Clean the blades. If the noise persists, contact a professional.

The fan wobbles during oscillation, what to do?

Make sure the base is properly screwed and the stand is on a flat surface. If the problem persists, the telescopic tube may be loose; tighten it.

What is the power consumption of the fan?

The power is 50 W, which corresponds to approximately 0.05 kWh per hour of use at maximum speed.

How to store the fan out of season?

Disassemble the blades and grille. Clean all parts. Pack the pieces in a box. Store in a dry, dust-free place.

USER MANUAL VL 5617 M AEG

Front view of a modern analog air conditioner fan with visible blades and grille (no text or symbols)

CE

AEG

Thank you for choosing our product. We hope you enjoy using the appliance.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

This warns you of dangers to your health and indicates possible injury risks.

CAUTION:

This refers to possible hazards to the machine or other objects.

i NOTE:

This highlights tips and information.

General Safety Instructions

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
  Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket.
• The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
  • Use only original spare parts.
• In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING!

Caution! Do not allow small children to play with the foil as there is a danger of suffocation!

- Pay careful attention to the following "Special Safety Instructions".

Special safety instructions

• Never stick fingers or other objects through the protection grid.
• Watch out for long hair! It can be caught in the fan owing to the air turbulence!
  • Use the appliance only with the protection grids on!
• If you need to remove the fan guard, first switch off the appliance and disconnect the mains plug.
• Select a stable base to avoid the tipping of the fan during use!
• Do not place the device immediately next to stoves or other sources of heat.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, al-

ways have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.

Unpacking the Device

1. Remove the device from its packaging.
2. Remove all of the packaging material such as foils, filling material, cable holders and cardboard packaging.
3. Check the scope of delivery.
4. Check the appliance for any transport damage to prevent a hazard.

NOTE:

• The device comes fully assembled.
- There may still be dust or production residues on the surface of the device. We recommend that you quickly wipe off the housing with a damp cloth.

Mains cable

Unwind the mains cable completely.

Position

The ideal position is a non-slip, flat surface.

Putting into Service

Electrical Connection

• Before inserting the plug into the socket. Make sure that the mains voltage to be used matches that of the device. You can find this information on the nameplate.
• Connect the device to a duly installed protective contact socket.

Use

Operation

Use the toggle switch on the top to select the speed:

• 0 off
- I slow
- || fast

Cleaning

WARNING:

• Always remove the mains plug before cleaning the device.
• If you need to remove the safety guard: Always switch the device off and remove the mains plug.
• Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result in an electric shock or fire.

CAUTION

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

• Clean the outside of the device with a dry cloth without any additives.

• If the device is very dirty wet a cloth with water and then wipe the device dry once you have finished.

20 English

Maintenance and storage

• Clean the appliance as described.
• We recommend that the appliance is kept in its original packaging if you do not intend to use it for long periods.
- Always store the appliance out of the reach of children, in a well-ventilated and dry place.

Noise development

The workplace-related emission value is less than 70 dB(A).

Technical Data

Model: VL 5617 M
Power supply: 220-240 V, 50 Hz
Power consumption:....20 W
Protection class:....II
Net weight: 1.6 kg

The right to make technical and design modifications in the course of continuous product development remains reserved.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Disposal

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.

Information concerning where the equipment can be disposed of can be obtained from your local authority.

Instrukcja obsługi

CTC Clatronic Sp. z o.o