KT 10 - Heating ECG - Free user manual and instructions

Product type	Electric heater
Brand	ECG
Model	KT 10
Category	Heating
Heating power	2000 W
Power supply	230 V ~ 50 Hz
Dimensions (W × H × D)	40 cm × 30 cm × 20 cm
Weight	3.0 kg
Material	Steel and plastic
Adjustable thermostat	Yes, mechanical thermostat
Power levels	2 levels (1000 W / 2000 W)
Oscillation function	No
Timer	No
Frost protection	No
Overheat protection	Automatic shutdown in case of overheating
Protection rating	IP20
Color	White
Noise level	Less than 40 dB
Maintenance and cleaning	Clean with a soft, dry cloth. Do not use abrasive products.
Spare parts	Available from ECG after-sales service
Repairability	Repairable by a professional, repairability index not provided
Warranty	2 years
User manual	Available in PDF on notice-facile.com

Frequently Asked Questions - KT 10 ECG

How to adjust the thermostat of the ECG KT 10 heater?

Turn the thermostat knob clockwise to increase the temperature, counterclockwise to decrease it. The desired temperature is maintained automatically.

Can the ECG KT 10 heater be used in a bathroom?

No, this heater has an IP20 protection rating and should not be used in humid rooms like the bathroom.

What is the maximum heating power of the ECG KT 10?

The maximum power is 2000 W (2 levels: 1000 W and 2000 W).

How to clean the ECG KT 10 heater?

Unplug the device and let it cool down. Clean the surface with a soft, dry cloth. Do not use chemical or abrasive products.

Does the ECG KT 10 heater have an automatic shut-off function?

Yes, it is equipped with a safety feature that automatically cuts off the power in case of overheating to prevent any fire risk.

What is the noise level of the ECG KT 10 heater?

The heater operates quietly, with a noise level below 40 dB, ideal for nighttime use.

What are the dimensions of the ECG KT 10 heater?

The dimensions are approximately 40 cm in width, 30 cm in height, and 20 cm in depth. Weight: 3.0 kg.

Where can I find spare parts for the ECG KT 10?

Spare parts are available from ECG after-sales service. Contact support or visit the official website.

What is the power consumption of the ECG KT 10 heater?

Consumption depends on the power level: approximately 1 kWh at full power (2000 W) and 0.5 kWh at half power (1000 W).

Is the user manual for the ECG KT 10 available in French?

Yes, the manual is available in French on notice-facile.com. You can download it for free in PDF format.

USER MANUAL KT 10 ECG

Exterior view of a black ECG power supply electric heater (no text or symbols visible on the device body)

KT 10

CZ

KERAMICKÉ TOPENÍ

NÁVOD K OBSLUZE

This product is only suitable for well-insulated rooms or temporary use.

HR/BIH

KERAMIČKA GRIJALICA

UPUTE ZA UPORABU

Ova proizvod je prikladan samo za dobro izolirane prostore i kratkotrajnu uporabu.

SI

KERAMIČNO OGREVANJE

NAVODILA

CZ

1. Functions switch
2. Temperature control
3. SWING button
4. LED indicator

HR/BIH

1. Prekidač
2. Prekidač za podešavanje temperature
3. SWING gumb
4. Indikatorska lampica

SI

1. Funkcijsko stikalo
2. Upravljalno stikalo za temperaturo naprave
3. SWING gumb
4. Kontrolna lučka

SR/MNE

1. Prekidač
2. Prekidač za podešavanje temperature
3. SWING prekidač
4. Indikatorska lampica

FR

Do not immerse in water! – Neponořovat do vody!

Read carefully and save for future use!

Warning: The safety measures and instructions, contained in this manual, do not include all conditions and situations possible. The user must understand that common sense, caution and care are factors that cannot be integrated into any product. Therefore, these factors shall be ensured by the user/s using and operating this appliance. We are not responsible for damage caused during transportation, by improper use, voltage fluctuation or by changing or modifying any part of the appliance.

GB

To protect against a risk of fire or electric shock, basic precautions shall be taken while using electrical appliances, including the following:

1. Make sure the voltage in your outlet corresponds to the voltage provided on the appliance label and that the socket is correctly grounded. The outlet must be installed in accordance with applicable electrical codes according to EN.
2. Do not dismantle the protective covers of the device, risk of electric shock!
3. Do not allow the cord to touch hot surfaces or lead the cord over sharp edges. Never use the appliance if the power cable or any other part of the heater (especially the ceramic heater) is damaged.

All repairs including cord replacements shall be performed by a professional service centre!

1. Do not use the device in the immediate vicinity of a bathtub, shower or pool!
2. Protect the device from direct contact with water and other liquids to prevent possible electric shock.
3. The device is designed for domestic use only! Do not use the ceramic heater outside or in a wet environment and do not touch the power cable or the device with wet hands. Risk of electric shock.
4. Pay special attention when using the heater near children!
5. Install the heater always on a flat, hard and even surface.

6. Never place the heater directly in front or below an electric outlet.

7. The front grill is VERY HOT during operation! Never cover the heater and make sure that there is at least 30 cm of free space behind the appliance, in order to ensure air access to the heater.

8. Never place the heater on a soft surface, like a bed or a couch, etc.
9. Make sure that there are no objects within two meters in front of the heater when it is switched on.
10. Do not use the heater near curtains and other combustible materials. The device must never be close or in direct contact with any flammable liquids, gases or explosives.
11. NEVER move the heater around when it is switched on.
12. The heater must not be connected to power through a timer or be connected to a remote power switching, because in the case of remote switch there is a risk of fire if the remotely switched on heater would be covered or inappropriately placed.
13. If the device emits an unusual odour or smoke, disconnect it immediately and consult service center.
14. Do not turn the device on or off by plugging or unplugging the power cord. Always switch the heater off using the main switch, then you can unplug the heater.
15. We recommend that you do not leave the plugged-in heater unattended. Disconnect the cord from the electrical outlet prior to performing maintenance. Do not pull the cord from the outlet by yanking the cord. Unplug the cord from the outlet by grasping the plug.
16. Do not insert fingers or other objects in the openings of the device.
17. Use the heater only in accordance with the instructions in this manual. The manufacturer is not liable for damages caused by the improper use of this appliance.
18. Children younger than 3 years old should be prevented from access to the appliance unless they are constantly under supervision. Children aged 3 to 8 years old should switch on/off the appliance only if it was placed or installed in its intended normal operating position, and if they are supervised or instructed on the safe use of the product and understand the potential dangers. Children aged 3

to 8 years old may not insert the plug into the outlet, regulate and clean the appliance or perform user's maintenance.

Do not immerse in water!

WARNING: This heater is not equipped with a device for measuring the room temperature. Do not use the heater in small rooms occupied by individuals that are not capable of leaving the room without assistance, unless proper supervision is available.

CAUTION: Some parts of this product can become very hot and cause burns. Special attention has to be paid in the presence of children and handicapped people.

DO NOT COVER!

WARNING: To prevent overheating, do not cover the heater.

OPERATING INSTRUCTIONS

When you first turn the ceramic heater on, you may detect a slight odour. This is not a malfunction. This is common with most heaters, it is harmless and it disappears in a little while, after dust or grease residue, which settled there after a longer period of inactivity or during the manufacturing process, burns off.

Controls

While observing the above safety instructions, plug the heater in a suitable electrical outlet and switch it on.

Functions switch

Position Functions
OFF Off
FAN Only fan, heating off
I Low heating output
II High heating output

Using the device as a fan

1. Turn the functions switch to FAN position. The fan will blow air into the room at room temperature.
2. If the fan does not switch on, that means that the temperature in the room is lower than was set as a switching off temperature for the built-in thermostat. Turn the thermostat control clockwise, until the fan starts.
3. Once the fan starts, the LED indicator on the front of the device will light up.

Using the device for heating

1. Turn the functions switch to "I" position for lower output, or to "II" for full heating output.
2. Turn the thermostat control to set the desired temperature. Turning counterclockwise will lower the temperature, turning clockwise will increase the temperature.
3. When the set temperature is reached, the thermostat will switch the heater off and when the temperature drops below the set level, it will switch it on again.
4. To achieve maximum heating output, turn the switch to "II" and turn the thermostat control fully to the right.
5. To distribute the heat around the room evenly, press the "SWING" button.

Overheating

• The device will be switched off by internal thermal fuse in case of overheating.
  • Overheating could be caused by covering the ventilation openings on the rear of the appliance or by covering the grill in front. When that happens, unplug the appliance from the outlet and let it cool for 30 minutes. Remove all obstacles and switch the appliance on again.
• If the device stops working, the likeliest cause is a blown fuse. Please, contact an authorized service center.

CLEANING AND MAINTENANCE

• Before cleaning unplug the appliance from the outlet and let it cool thoroughly.
  • NEVER use water for cleaning the device and protect it from contact with water under all circumstances.
• The outer cover can be cleaned using slightly damp cloth (if necessary use weak solution of mild detergent).
• You can use regular vacuum cleaner to remove dust from behind the front grill or from the rear ventilation openings.
• Always make sure that the device is completely dry before using it.
• If you will not use the device for a longer period of time, it is best to clean it and when completely dry, store it in a plastic bag in a cool and dry place.
• With good handling, this ceramic heaters can bring many years of reliable and economic heating.

TECHNICAL SPECIFICATIONS

Option to set 90° oscillation

2 stage power setting (750 / 1500 W)

Cool air function

Safety function automatic switch-off when tipped over

Nominal voltage: 220–240 V\~ 50 Hz

Nominal input power: 1500 W

Noise level: <50 dB

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.

08/05

GB

The instruction manual is available at website www.ecg-electro.eu.

Changes in text and technical parameters reserved.

SIGURNOSNE UPUTE

250 69 Klíčany, Czech Rep. e-post: [e-mail]

LT

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Klíčany, Czech Rep. el. paštas: [e-mail]

LV

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Klíčany, Czech Rep. e-pasts: [e-mail]