VT-6407 W - Weather Station Vitek - Free user manual and instructions

Product Type	Weather Station
Model	VT-6407 W
Brand	Vitek
Color	White
Dimensions (main unit)	Approx. 120 x 80 x 30 mm
Weight (main unit)	Approx. 200 g
Power Source	2 x AAA batteries (not included)
Display Type	LCD with backlight
Indoor Temperature Range	0°C to +50°C
Outdoor Temperature Range	-20°C to +50°C (with external sensor)
Humidity Measurement	20% to 95% RH
Wireless Sensor Range	Up to 30 meters (open area)
Main Functions	Time/date, indoor/outdoor temperature, humidity, weather forecast, barometric pressure, alarm clock, snooze
Weather Forecast	Sunny, partly cloudy, cloudy, rainy, snowy icons
Moon Phase	Displayed
Maintenance & Cleaning	Wipe with a soft, dry cloth. Do not use solvents or abrasive cleaners.
Safety Precautions	Keep away from water and extreme temperatures. Do not disassemble. Remove batteries if not used for a long time.
Spare Parts / Repairability	Contact authorized service center for replacement parts. Not user-serviceable.
General Information	Includes main unit and one wireless outdoor sensor.

Frequently Asked Questions - VT-6407 W Vitek

How do I set up the weather station?

Insert 2 AAA batteries into the main unit and 2 AAA batteries into the outdoor sensor. The devices will automatically pair within a few minutes. After pairing, set the time and date manually.

What does the weather forecast icon mean?

The station displays icons for sunny, partly cloudy, cloudy, rainy, and snowy conditions based on barometric pressure trends. The forecast is for the next 12-24 hours.

Why is the outdoor temperature not showing?

Ensure the outdoor sensor is within 30 meters of the main unit and that there are no large metal objects or walls interfering. Replace batteries if the signal is weak.

How do I change the temperature unit from Celsius to Fahrenheit?

Press and hold the 'SET' button for 3 seconds to enter settings mode. Use the arrow keys to navigate to temperature unit option and toggle between °C and °F.

Can I connect multiple outdoor sensors?

No, this model supports only one wireless sensor.

Does the station have a backlight?

Yes, the LCD display has a backlight that can be activated by pressing the 'SNOOZE/LIGHT' button. It stays on for about 10 seconds.

How accurate is the weather forecast?

The forecast is based on barometric pressure changes and is for general reference only. It is not as accurate as professional meteorological data.

What should I do if the time is incorrect?

Press and hold 'SET' to enter settings, then use the arrow keys to adjust hour, minute, and date. Confirm with 'SET'.

How do I clean the weather station?

Use a soft, dry cloth to wipe the surfaces. Do not use water, cleaning agents, or abrasive materials.

The alarm does not work. What can I do?

Check if the alarm is enabled (alarm icon displayed). Ensure the volume is not set to zero. Replace batteries if necessary.

USER MANUAL VT-6407 W Vitek

ENGLISH

WEATHER STATION

Before connecting, operating or adjusting the unit read the instruction carefully. Follow all warnings and recommendations, specified in this instruction.

Keep the instruction for further reference.

Safety measures

• Before operating the unit, read the instruction carefully.
  • Do not immerse the units into water.
• Do not use abrasives or substances causing damage of body and inner unit parts for cleaning.
• Do not subject the units to impacts (dust and moisture are also to be avoided), as it can lead to failures, reduction of service life, battery damage and to deformation of the unit body parts.
• If you break the unit, it will lead to warranty cancellation. No parts inside the unit require user's attention.
• For children's safety do not leave polyethylene bags, used as a packaging, unattended.
• Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
• Keep the unit away from children.
• Do not allow children to use the unit as a toy.
• This unit is not intended for usage by children or disabled persons unless they are given appropriate and understandable instructions by a person who is responsible for their safety on safety measures and information about dangers that can be caused by improper usage of the unit.
• Use only new batteries specified in the instruction. Do not use a new and an old battery or batteries of different brands at the same time.
• Long remote sensor operation under low or high temperatures can reduce voltage

of its batteries that causes decreasing of transmission range.

- Do not dismantle the unit by yourself, contact the nearest authorized service center if any damage is detected.

DESCRIPTION

Main unit (Pic. 1)

1. Display
2. Display illumination and alarm repeat button LIGHT/SNOOZE
3. AL1, AL2 alarm time indication / display sectors switching, setting confirmation button MODE.
4. Alarm time indication, alarm on/off button ALARM
5. Pressure unit selection / value setting button ▲
6. Temperature unit selection (°C/°F) / value setting button ▼
7. Button for indication of maximal/minimal temperature and humidity values registered by main unit and remote sensor MEMORY
8. RESET button
9. Battery compartment lid
10. Adapter jack (DC 4,5 V)
11. Stand
12. Wall mounting hole
13. Battery compartment
14. Outdoor wired sensor socket
15. Outdoor wired sensor

Remote sensor (Pic. 2)

Before the first use

Unpack the unit and remove packing materials. Check the unit for damages. In case of damages do not switch the weather station on.

Note:

- If the unit has been exposed to negative temperatures, keep it under room temperature for 30 minutes before its first switching on.

ENGLISH

To avoid unit failures, place the batteries into the remote sensor before the main unit.

Place the remote sensor within the effective data transfer range and as close as possible to the main unit. Locate the main unit and remote sensor in places with minimal interference for better data transfer. Take into account that remote sensor data transfer range depends on material of walls and their quantity. Try several locations of remote sensor and main unit. Though the remote sensor is weather-resistant, it should be placed away from direct sunlight, rain or snow.

Home devices (doorbell, alarm system etc.) can interfere when the main unit receives data signal from the remote sensor. It is normal and does not influence general operation.

Transfer and receipt of data signal will resume after temporary interference is removed.

Installation of batteries into the remote sensor

• Open the battery compartment lid, by pulling the lid down.
• Insert 2 batteries ("AAA", 1,5 V), strictly following the polarity.
• Close the battery compartment lid.

Installing batteries into the main unit

1. Open the battery compartment lid.
2. Insert 3 batteries ("AAA", 1,5 V), following the polarity.
3. Close the battery compartment lid.

Note:

Main unit is intended both for mains and battery supply. When the unit is powered by the adapter, the display is illuminated constantly.

Replacing batteries of the main unit

In case of significant decrease of display contrast, the batteries in the main unit need to be replaced.

Replacing batteries of the remote sensor If the battery-low pictogram appears, the batteries need to be replaced.

Note: Long remote sensor operation under low or high temperatures can reduce voltage of its batteries that causes decreasing of transmission range.

Starting operation

After the main unit is connected to the mains or the batteries are installed, 2 signal tones will sound; display illumination will be switched on, and a flashing symbol 🔊, indicating search of remote sensor signal, will appear on the display.

After installing batteries into the remote sensor it will start data transfer (temperature and humidity) with an interval of about 1 minute.

After a few seconds of receiving data it will appear on the display of the main unit. The data is updated automatically every minute. If there is no signal from the remote sensor, the symbols “--”will appear in the upper-right corner of display.

Press and hold the ▼ button for 2 seconds to synchronize the main unit and remote sensor.

Installing the main unit and remote sensor

You can install the remote sensor both on a desk and on a wall, using the appropriate hole (12). When installing the sensor make sure, that it is fastened properly. Do not place the sensor close to metal surfaces. Install it within the effective data transfer range and as close as possible to the main unit. Locate the main unit and remote sensor in places with minimal interference for better data transfer. Take into account that data transfer range (up to 30 meters in open areas) depends on the material and quantity of walls. Try several locations of remote sensor and main unit and select the optimal one. Though the remote sensor is

ENGLISH

weather-resistant, it should be placed away from direct sunlight, rain or snow.

The outdoor wired sensor is used when ambient temperature decreases below -9,90C. In this case remote sensor is located indoors, and the outdoor wired sensor -outdoors.

Display illumination

Press the Light/Snooze button to switch the illumination on. The illumination will be switched off in about 7 seconds.

Date and time setting

Press and hold the MODE button for three seconds to enter the setting mode. After that you can select various settings by pressing the MODE button:

1. Current year/month/day setting.
2. Month/day or day/month sequence selection.
3. Selection of 12/24-hour time indication format,
4. Current time setting (hours/minutes).

5. Exit setting modes.

6. Press and hold the MODE button for three seconds to enter the setting mode. The current year indication (2012 by default) starts flashing, press the buttons ▼/▲ to set the intended value and press the MODE button to confirm your setting.

7. Repeat the same procedure to set month, day, day-month format, 12/24-hour time indication format, hours and minutes.

Atmospheric pressure unit setting

By consequent pressing of the ▲ button select atmospheric pressure units: millibar/

hectopascal (mb/hPa), Hg inches (inHg) or Hg millimeters (mmHg).

Temperature units (°C/°F)

Use the ▼ button to select temperature measuring units (°C/°F)

Temperature and humidity indication

By each pressing of MEMORY button following parameters will be switched over:

Display indication	Temperature range	Humidity range	Notes
COM 20°C	-25°C(68°F - 77°F)	40% - 70%	Ideal temperature and humidity range
WET	-5°C- +50°C(23°F - 122°F)	More than 70%	Relative humidity excess
DRY	-5°C - +50°C(23°F - 122°F)	Less than 40%	Low humidity
No indication	Below 20°C(68°F) or above 25°C (77°F)	40%-70%

• Current temperature and humidity.
• Minimal temperature and humidity.
• Maximal temperature and humidity.

Symbolic weather forecast

The weather forecast is created according to atmospheric pressure trends. According to the collected data, the weather station can forecast weather for the next 12-24 hours.

Notes: To receive more precise weather forecast you should enter your current weather conditions at the initial start-up of the unit.

Display symbol
Forecast	Sunny	Partly cloudy	Overcast	Rain	Lighting storm	Sleet	Snow

ENGLISH

Press and hold the button ▲ for 2 seconds to enter the weather symbol selection mode.

Use the button ▼ to select the most suitable weather symbol. Press the button ▲ once again to confirm your selection.

The indication precision is approximately 70%. The weather station forecasts possible weather, that is why the symbols may not comply with current weather. The weather forecast: «sunny» for the upcoming night means a clear sky.

Comfort level

Temperature and humidity data is used for evaluating of comfort level, that is represented by one of the three pictograms: wet (wet), com (comfortable), dry (dry).

Setting the alarm time

- Press the MODE button consequently to display set alarm times (A1, A2). When the

alarm clock is switched off, the symbols «0:00» will appear on the display.

• Hold the ALARM button for 3 seconds, the clock symbols start flashing. Use ▼/▲ buttons to select desired value and press the ALARM button to confirm your setting.
• Repeat the same procedure to set the time of the second alarm.
• By pressing the ALARM button repeatedly you can activate one or two alarms or both of them at the same time or deactivate them.

Repeating alarm signal

The alarm signal can be switched off for 5 minutes by pressing the SNOOZE button.

If you do not switch the alarm clock off within 2 minutes, it will be automatically switched to the signal repeat mode.

Specifications

Temperature measuring
Remote sensor (used without outdoor wired sensor connection)	From -9,9°C to 50°CFrom 14°F to 122°F
Remote sensor(with outdoor wire sensor connected)	From -40°C to 70°CFrom -67°F to 158°F
Temperature measuring precision 0,1°C/0,1°F
Relative humidity measuring
Main unit 20%-95%
Remote sensor 20%-95%
Relative humidity measuring precision 1%
Data transfer rate	868 mHz
Number of sensors connected	1
Transmission range	Up to 50 meters
Power supply
Main unit 4,5 V DC power adapter	3 «AAA» batteries, 1,5 V
Remote sensor 2 «AAA» batteries

ENGLISH

Delivery set

Main unit - 1 pc.

Remote sensor - 1 pc.

Outdoor wired sensor - 1 pc.

ATTENTION!

- It is recommended to install the remote sensor indoors, and its wired sensor outdoors.

The manufacturer reserves the right to change design and specifications of the unit without preliminary notice.

Unit operating life is 3 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (73/23 EEC)

русский

МЕТЕОСТАНЦИЯ

Tashqi datchik (2-rasm).

1. Jihoz devorga biriktiriladigan o'rni
2. Batareya solinadigan bo'lma
3. Tashqi simli datchik ulanadigan o'rin
4. Simli tashqi datchik

Birinchi marta ishlatishdan oldin

Jihozni qutisidan oling, o'ralgan ashyolarni olib tashlang. Biror joyi shikastlanm qarab ko'ring. Biror joyi shikastlangan bo'lsa metestansiyani ishlatmang.

Eslatma:

- Agar jihozga past harorat ta'sir bo'lsa birinchi marta ishlatishdan kamida 30 daqiga xona haroratida turishi kerak.

Jihoz to'xtamasdan ishlashi uchun batareyani oldin tashqi datchikka, keyin esa asos blokka qo'ying.

Tashqi datchikni ma'lumot samarali uzatiladigan radiusga, iloji borichi asos blokka yaqinroq qo'ying. Ma'lumot yaxshi uz uchun asos blok bilan tashqi datchikni xalaqit berilishi kam bo'ladigan joyga o'rnat

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE