VTD-TND12FPN - Surveillance Camera Vitek - Free user manual and instructions
Find the device manual for free VTD-TND12FPN Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera (Turret/Dome) |
| Brand | Vitek |
| Model | VTD-TND12FPN |
| Resolution | 2 Megapixels (1920x1080) Full HD |
| Lens | Fixed focal length 3.6mm |
| Night Vision | Yes, IR LEDs with 30m range |
| Housing | Weatherproof design (IP66) |
| Power Supply | Power over Ethernet (PoE) or 12V DC |
| Video Compression | H.265 / H.264 dual stream |
| Field of View | Approx. 90° |
| Dimensions | Φ105mm x 95mm |
| Weight | 0.5 kg |
| Ingress Protection | IP66 rated for outdoor use |
| Operating Temperature | -30°C to +60°C |
| Mounting | Ceiling or wall mount bracket included |
| Main Functions | Motion detection, remote viewing, microSD card slot |
| Maintenance | Clean lens with a soft, dry cloth |
| Safety | Complies with CE / RoHS standards |
| Spare Parts & Repairability | Available through authorized service centers |
| General Information | Manual available for free download in PDF (20 pages) |
Frequently Asked Questions - VTD-TND12FPN Vitek
How do I reset the Vitek VTD-TND12FPN to factory defaults?
Press and hold the reset button on the back of the camera for 10 seconds using a paperclip until the indicator light blinks. The camera will reboot and restore default settings.
What is the default IP address of the camera?
The default IP is 192.168.1.168. Set your computer to the same subnet and access the camera via a web browser.
How can I connect the camera to my network?
The camera supports PoE (Power over Ethernet) and 12V DC. Connect an Ethernet cable from your router/switch to the camera's RJ45 port, and power will be supplied through the same cable if your switch supports PoE.
Can I view the camera remotely from my smartphone?
Yes, download the Vitek mobile app (VitekVision) and add the camera by scanning its QR code. Ensure the camera is connected to the internet and set up port forwarding or use P2P.
What should I do if there is no video signal from the camera?
Check all cable connections, confirm the camera has power, and verify that the IP address is reachable by pinging it. Also, ensure your browser has the necessary plugins or use the latest version.
How do I update the camera firmware?
Visit the Vitek support website, download the latest firmware file, then log into the camera's web interface, go to System > Upgrade, and upload the file.
Is this camera suitable for outdoor use?
Yes, the VTD-TND12FPN is rated IP66, meaning it is fully protected against dust and powerful water jets, so it can be installed outdoors.
How do I set up motion detection alerts?
In the camera's web interface, go to Event > Motion Detection, enable the feature, draw detection areas, and configure sensitivity. You can set up email alerts or push notifications via the app.
What is the maximum microSD card capacity supported?
The camera supports microSD cards up to 128GB for local storage of recorded videos.
How should I clean the camera lens and housing?
Use a soft, lint-free cloth slightly dampened with water (no solvents) to gently wipe the lens and housing. Avoid touching the lens directly.
User questions about VTD-TND12FPN Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual VTD-TND12FPN - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTD-TND12FPN by Vitek.
USER MANUAL VTD-TND12FPN Vitek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vitek
Model : VTD-TND12FPN
Category : Surveillance Camera