VT-EPH-HDA5 - Surveillance Camera Vitek - Free user manual and instructions
Find the device manual for free VT-EPH-HDA5 Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Vitek |
| Model | VT-EPH-HDA5 |
| Image Sensor | 1/2.8" CMOS |
| Resolution | 1920 x 1080 (Full HD) |
| Lens Type | Fixed 3.6mm |
| Night Vision | IR LEDs with 20m range |
| Video Output | HD-TVI / AHD compatible |
| Waterproof Rating | IP66 |
| Power Supply | DC 12V |
| Power Consumption | Less than 4W |
| Dimensions (L x W x H) | 70 x 70 x 150 mm |
| Weight | 500 g |
| Mounting | Bracket included for wall or ceiling |
| Operating Temperature | -10°C to 50°C |
| Key Functions | Motion detection, auto white balance, auto gain control |
| Cleaning and Maintenance | Wipe with a soft, dry cloth; avoid solvents |
| Safety | Set a strong password on the recorder and keep firmware updated |
| Spare Parts and Repair | Use only Vitek-approved power adapters; contact service center for repairs |
| General Information | Free PDF manual available for download |
Frequently Asked Questions - VT-EPH-HDA5 Vitek
How do I connect the Vitek VT-EPH-HDA5 to my DVR?
Connect the camera's BNC output to the DVR's video input using a coaxial cable. For power, use a DC 12V adapter.
What is the maximum night vision distance?
The camera is equipped with IR LEDs that provide clear vision up to 20 meters in complete darkness.
Is this camera suitable for outdoor installation?
Yes, it has an IP66 weatherproof rating, making it resistant to dust and water jets from any direction.
How should I clean the camera lens?
Use a soft, dry cloth to gently wipe the lens. Avoid using solvents or abrasive materials which can damage the coating.
Which video formats are supported by this camera?
The camera supports HD-TVI, AHD, and CVI standards, allowing compatibility with most modern HD DVRs.
What should I do if the image appears blurry?
Check if the lens is dirty or if the focus ring is misadjusted. Clean the lens and ensure the camera is properly focused on the target.
Can I reset the camera to factory settings?
Yes, press and hold the reset button on the camera body for 10 seconds. The camera will reboot with default settings.
What power supply is required for this camera?
The camera requires a 12V DC power supply. Use the included adapter or a Vitek-approved replacement to ensure reliable operation.
Where can I find the user manual for the VT-EPH-HDA5?
The free PDF manual is available for direct download on the notice-facile.com website.
Does the camera support motion detection?
Yes, it supports motion detection which can be configured through the DVR menu. It also supports auto white balance and auto gain control.
User questions about VT-EPH-HDA5 Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual VT-EPH-HDA5 - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-EPH-HDA5 by Vitek.
USER MANUAL VT-EPH-HDA5 Vitek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vitek
Model : VT-EPH-HDA5
Category : Surveillance Camera