RC 1 - Flashlight ANSMANN - Free user manual and instructions
Find the device manual for free RC 1 ANSMANN in PDF.
User questions about RC 1 ANSMANN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Flashlight in PDF format for free! Find your manual RC 1 - ANSMANN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RC 1 by ANSMANN.
USER MANUAL RC 1 ANSMANN
The RC 1 is a rechargeable torch with krypton bulb (KR 2.2V/0.5A/P13.5). It is powered by a 2.4 V NiMH battery pack with 1,200 mAh and can be recharged direct at any 230 V mains socket. The magnet allows the torch to be stuck to any magnetic surface.
cCharging
Charge the torch before using it for the first time. To charge, remove the complete bottom part of the lamp (consisting of battery pack, charging electronics and power plug) from the slot. Connect it to a 230 V mains socket. The integrated rechargeable battery pack is then being charged with a charging current of approx. 120 mA. The charging time up to the maximum charge is around 10 hours. The battery pack can be left attached to the mains until the torch is needed. The lamp is charged continuously to avoid losing capacity.
Operating tiMe
The operating time of the RC 1 torch is around 120 minutes.
OPERATION
If you want to use the torch, disconnect the battery pack from the mains. By pushing the slide switch towards the head of the lamp, the torch is switched on. The integrated magnet at the lower part of the torch allows the lamps to be stuck to metallic surfaces when in operation.
Attention: The bulb is sensitive to shocks. If the lamp drops, the thin lighting filament in the bulb may break. Please recharge the lamp early enough when in use. Never leave the lamp switched on with empty batteries as this may cause damages to the battery pack.
REPLACING THE BULB
Turn the head of the torch anticlockwise and remove the reflector and the bulb. The bulb can now easily be replaced. A spare bulb is attached to the inside of the lamp head.
ACCESSORIES
Includes: blue carrying strap, 230 V power supply. Charging electronics and 1,200 mAh/2.4 V battery pack are integrated in the torch. A mains adap-
tor plug for UK is available as special accessory.

text_image
wwarning
Protect against high humidity and ter. Do not expose to extreme temperatures.
Do not clean and maintain the torch during the charging process. To clean the lamp only use a damp cloth. In case of a defect do not dismantle the torch or charger, but return it to an authorised dealer.
enVirOnMental reFerence
Rechargeable batteries are not to be disposed of via domestic refuse, but returned to dealers or battery collecting points.
ANSMANN RC1 (Part No. 5101103)
REPLACEMENT DE L'AMPOULE
text_image
Warning symbol with exclamation mark inside triangle, likely indicating a hazard or alertaVertisseMent
text_image
Warning symbol with exclamation mark inside triangle, indicating a hazard or alertНИМАНИЕ
text_image
Warning symbol with exclamation mark inside a triangleFigYeleM!
ANSMANN RC1 (No. de art. 5101103)
LUKTURA LIETOŠANA
text_image
Warning sign with exclamation mark inside a triangleWAGA
text_image
Warning symbol with exclamation mark inside a trianglePOZORNĚNÍ
text_image
Warning symbol with exclamation mark inside triangle, likely indicating a hazard or alertARNOSTNA NAVODILA
ANSMANN RC1 (Part No. 5101102)