DS 12DVFA - Drill HITACHI - Free user manual and instructions
Find the device manual for free DS 12DVFA HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill Driver |
| Brand | Hitachi |
| Model | DS 12DVFA |
| Power Source | Rechargeable Battery (12V Ni-Cd or Li-Ion) |
| Voltage | 12 V |
| Chuck Type | Keyless, 0.8 - 10 mm (1/32" - 3/8") |
| No-Load Speed | 0 - 600 / 0 - 1800 RPM (2-speed gearbox) |
| Max Torque | Approx. 30 Nm (22 ft-lbs) |
| Weight (with battery) | Approx. 1.5 kg (3.3 lbs) |
| Dimensions (L x H) | 215 x 200 mm (8.5" x 7.9") |
| Battery Capacity | 1.3 Ah (Ni-Cd) or 2.0 Ah (Li-Ion) typical |
| Charging Time | Approx. 1 hour (with fast charger) |
| Key Features | Variable speed trigger, forward/reverse, LED work light, belt clip |
| Maintenance | Clean with dry cloth; store in dry place; inspect carbon brushes periodically |
| Safety | Use safety glasses; avoid moisture; disconnect battery before servicing |
| Spare Parts Availability | Battery packs, chargers, carbon brushes, chuck assembly |
| Repairability | Modular design; user-replaceable brushes and chuck; service by qualified technician for motor |
Frequently Asked Questions - DS 12DVFA HITACHI
What type of battery does the Hitachi DS 12DVFA use?
The DS 12DVFA typically uses a 12V Ni-Cd or Li-Ion battery pack. Check your unit's labeling for the exact type.
How do I change the chuck on this drill?
Unscrew the chuck by turning it counterclockwise while holding the spindle. Some models have a locking screw inside; remove it first. Replace with a compatible keyless chuck.
Is the DS 12DVFA compatible with Hitachi's 12V Li-Ion batteries?
Yes, it is compatible with Hitachi 12V Li-Ion batteries as well as older Ni-Cd packs, provided the battery shape matches.
How long does the battery take to charge?
With the standard charger, a fully depleted Ni-Cd battery charges in about 1 hour. Li-Ion packs may charge faster.
Can I use this drill for driving screws?
Yes, the DS 12DVFA has a variable speed trigger and an adjustable clutch (if equipped) for screwdriving applications.
What is the maximum drilling diameter in steel?
The maximum recommended drilling diameter in steel is 10 mm (3/8 inch). Use sharp bits and lower speed settings.
How do I replace the carbon brushes?
Remove the brush caps on the motor housing, take out the worn brushes, and insert new ones. Ensure they are seated properly before reassembly.
Why does the drill stop suddenly during use?
Possible causes: battery discharged, thermal protection activated, or carbon brushes worn. Allow the tool to cool down or recharge/replace battery.
Does this drill have an LED light?
Many models of the DS 12DVFA include a small LED work light above the trigger to illuminate the work area.
What is the warranty period for Hitachi DS 12DVFA?
Hitachi offers a standard 2-year warranty for cordless drills, covering defects in materials and workmanship. Check your local terms.
User questions about DS 12DVFA HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DS 12DVFA - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS 12DVFA by HITACHI.